Unable to see audit log in Adapter Engine (Communication channel monitoring

Hi
I am unable to see audit log in Adapter Engine (Communication channel monitoring).
Could please suggest what parameter to set to display in PI 7.0 visual administrator.

/people/kenny.scott/blog/2009/03/08/pi-71-af-messaging-system-audit-log-persistence
Did you tried this paramter even though the above is applicable for PI 7.1
Rajesh

Similar Messages

Missing Audit Log of Adapter Engine in Message Monitoring

Hi!
I've a problem with a fresh installed PI:
The Adapter Engine doesn't log anything in the Message Monitoring. The Integration Engine logs everything properly, but all entries from the adapter engine are missing. It looks like no message was processed by the AE, but in fact AE is processing the messages properly, only logging fails.
What can cause this behaviour?
Best regards,
Daniel

Hi Agasthuri,
yes, maybe something gone wrong in the post install, I will ask the guy which did the installation of the PI. Therefore I didn't have the logon data for performing a cache refresh, but in the log entries it seems that this is working properly.
Hi Praveen,
in Communication Channel Monitoring (In PI this is no longer found under Adapter Monitoring), I can see that the messages are delivered, but I can't see the Audit Log entries there.
I checked the MDT, but there are also no messages displayed.
End-to-End-Monitoring seems to be a good solution, but it seems that it is something configured wrong in this installation I will try to get the guy which cares for Basis to look after it.
Best regards,
Daniel

FQDN problem in adapter engine,communication channel monitoring

Hi all,
Recently i configured FQDN for PI system while configuring END to END monitoring. Everything is going fine and end to end monitored worked smoothly.
But Problem started in comminuication channel monitring.adapter engine status and others. Because its trying to retrieval the URl without FQDN and its showing an error as requested resource does not exist.
I changed the exchange profile paramters also. But still i am afcing the problem.
So,please suggest me to overcome from this issue.
Regards
Vijay

/people/kenny.scott/blog/2009/03/08/pi-71-af-messaging-system-audit-log-persistence
Did you tried this paramter even though the above is applicable for PI 7.1
Rajesh

Audit log in communication channel monitoring(MDT)

Hi,
I am doing a soap lookup in my message mapping for an interface.In order to monitor the request and response communication , I am unable to see the 'Audit Log' for the soap communication channel that was configured for the same.On clicking the message id for viewing the audit log,an error page is displayed as "Requested Page not found"
Could you please help me as to why I am unable to see the Audit Log.
Regards
Janice

Hi! Janice,
Could you guide me as to where I can set the parameter for sync logging in AE
You can got to
1) T Code: SXMB_ADM
2) Click Integration Engine Configuration
3) Again click Configuration
4) Now Keep the parameter as TRACE_LEVEL = 3 instead of 0 or 1 or 2.
then again go to SXMB_MONI there you can view now SOAP Request and Response.
I hope now it is resolved right
Regards
Amar Srinivas Eli

I cant see 'audit log report' link in my Site Collection Administration

Hi i am configuring my sharepoint 2013, i want to use the audit feature, so i follow the steps
View audit log reports
To view an audit log report:
On the Settings menu, click Site settings.
Note The Site Collection Administration section will not be available if you do not have the necessary permissions, such as by being a member of the default Site Collections Administrators group.
In the Site Collection Administration section, select
Audit log reports.
but i cant see Audit log reports at all!!!!!!
any help is much appreiated!
My server is windows server 2012 and i am not using sharepoint foundation version.

i follow the steps in you website, that is the same website i referenced.
it ask me to :
On the Settings menu, click Site settings.
In the Site Collection Administration section, select
Audit log reports.
but the question is that i can NOT find this 'Audit log reports' link to select , the question is not i can not open the file.
the items in my Site Collection Administration is:
Site Collection Administration
Recycle bin
Site collection features
Site hierarchy
Site collection audit settings
Portal site connection
Site collection app permissions
Storage Metrics
Help settings
HTML Field Security
SharePoint Designer Settings
there is no 'Audit log reports' link!

Communication channel monitoring (adapter engine) in ccms (rz20) available?

Hi,
we have problems in our xi system (PI 7.0, SPS10). The adapter engine can only be monitored in the communication channel monitoring, available in the runtime workbench!
There sometimes errors disappear. At the moment these errors accumulate!
Is it possible to view these errors/ alerts in the ccms (rz20) monitoring?
So we don't look all the time in the communication channel monitoring!
Have anybody an idea?
Regards,
matthias isenburg

Have u seen the discussion
Re: How do I configure an auto-email alert for Adapter engine errors
Regards,
Prateek

Custom Adapter - No content in Communication channel Monitoring for JCA

HI,
     We have developed a Custom Adapter for our client in XI with name JCA and it is working absolutely fine.
     Issue: We are not getting any entries in Communication Channel Monitoring for success or Error Messages.
     We have used Audit log for success or Failure entries and they are coming fine in Messaging System but there coule be a standard way to get entries in Channel Monitoring.
    Our client needs the entries in CC monitoring instead of Customised Audit Logs.
    Please help.
REgards,
Anurag Garg

HI Satish,
                 Thanks for answer. I am looking for this in Custom Adpater not in adapter module.
                 This log creates a trace File . Its not to do with getting messages in CC monitoring as we do get for File Adapter or other Adapters.
               Like- Message Successfully put into the queue.
                     - Successfully processed.
                 Such Messages are there in sample_ra. jar file code but they are not visible in CC Monitoring.
               I think some extra code needs to be added to activate this in Monitoring.
               Please suggest.
REgards,
Anurag Garg

Communication channel monitoring, adapter monitoring error

Hi ,
I am using SAP PI 7.0 with HP-UX.
Here we have 6 logical hosts in one physical host.
Physical host name is u2013 xyz
Integration server name u2013 sappid
The Central SLD: sappid
URL for sappid: sappid: 50300
When I monitoring RWB----
>communication channel monitoring, adapter monitoring, in Development system It's detecting another logical host ( like www://sapard:50300 ) and getting page cannot find error.
1.SLDCHECK
   http://xyz:50300/sld
   host name: xyz
port number: 50300
user : SLDDSUSER
2.SXMB_IFR
   http://xyz:50300/rep/start/index.jsp
3.SMICM
   icm/server_port_0 = PROT=HTTP,PORT=8003
   icm/server_port_1 = PROT=SMTP,PORT=0
   icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
   icm/host_name_full = sappid
4. SLDAPICUST
    SAP_CONFIG   1   xyz   50300   SLDDSUSER
5. SXMB_ADMIN
    Role of Business System Integration Server
    Corresponding Integ. Server http://sappid:8003/sap/xi/engine?type=entry
   Integration Engine Configuration Data -> Check button
6.When I opened the http://xyz:50300/rep/start/index.jsp I got the
XI start page.
    when I opened the http://sappid.AIG.com:50300/
   the page not found issue, when I opened http://sappid:50300/ I got the
   XI start page.
plz help me for this issue.
thanks in advance.
regards,
reddy.

Hello,
I think the FQDN is not set properly.
Problem in the parameter
SMICM
icm/server_port_0 = PROT=HTTP,PORT=8003
icm/server_port_1 = PROT=SMTP,PORT=0
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
*icm/host_name_full = sappid *
Replace this parameter in instance profile
icm/host_name_full = sappid.AIG.com
Then in the host entry of your server please add an entry
172.18.23.233(ip your ur Xi server)       sappid.AIG.com
Then let us know the result.
Thanks and Regards
Vijay

Unable to determine name of central adapter engine

We have a central SLD set up. I am now moving some configuration and testing from our dev environment to our qa environment. When I do a cache notification from the Integration Directory I receive a message stating that "Unable to determine the name of the central Adapter Engine from the System Landscape Directory". When I look under the technical system type of Exchange Infrastructure of the system landscape directory I do not see the Adapter Engine of my QA or Production environment. I only see one central adapter engine listed. That of my development environment. It will not let me define another technical system to add these adapter engines because the button New Technical System is grayed out. How do I get these adapter engines defined in the SLD?
Thanks,
Jim

I also had the same problem. But when I opened Integration Directory and Repository from the links, it got added to the Technical system under Exchange Infrastructure. Only Adapter Engine was not getting added.
But after applying the note 764176. Adapter Engine added to SLD and after refreshing cache now Adapter Engine also got added to RWB components.
Only one problem now - in Message monitoring, If I select Adapter Engine from the drop down, I get page cannot be displayed. Is it due to the fact that I dont have any adapters configured?? and also no messages available for that matter?? as it is a fresh box..
Message was edited by: Thilothama v

Unable to start the plain J2SE Adapter Engine

Hi All,
Eariler i was able to start the Adapter Engine. But i dont know what went wrong, i am not able to start the adapter engine.Is there any way to find out what went wrong?
Regards
Sathya
Message was edited by: Sathya Priya

Make sure you have write permissions to your log files and that you have permissions to start the Engine.
Also check your JAVA_HOME path by typing set in windows and env in unix systems.Make sure it points to your java installation directory lib and bin files.
Your ADAPTER_HOME should also contain all jars required or the absolute path to these jars need to be defined in your run_adapter_*. Not to sure if you are running windows or a unix box.
Regards
Robert

Cache Notifications unable to determine name of Central Adapter Engine

Hi All,
When I tried Tools -> Cache Notifications in the integration directory, im getting
Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time.
Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine.
This is usually structured as follows: af.<SAP System ID>.<Name of application server>
Once i click the OK on the pop up dialog which has this message, it has given the Notifications and Problems Tab.
In the Problems Tab, its has given an error message
'Unable to find an associated SLD element (source element: SAP_XIIntegrationServer"
Any suggestion of what to look for to modify ??
Thanks
Sourav

Hi Kedar,
Check this Blog. it should probabaly solve your problem.
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
Thanks
Sourav

SAP Authorization: unable to see change logs for role assignments

Hi ,
please do help us in this regards .
When trying to find the changes update to certain role . We are unable to see that changes/ hope the changes are note gettng updated.
we recive the message " NO CHAGE DOCUMENT FOUND TO MATCH SPECIFIED CRITERIA"
MESSAGE NO .CD887.
Please let us know how can this be sorted.
Best Regards,
Rahul.

Hi,
As per your query you can get this info in suim and when you modify any role the you have to activate this.
Anil

Unable to get Audit logs for Data Mining Model Oracle11g

Hi All, I followed all the steps given below 2 links but not getting any audit logs.
http://download.oracle.com/docs/cd/B28359_01/datamine.111/b28130/install_odm.htm#DMADM024
http://download.oracle.com/docs/cd/B28359_01/datamine.111/b28130/schemaobjs.htm#sthref233
Made sure the audit_trail is set to DB.
SQL cmds and its output shown below
SQL> AUDIT GRANT,AUDIT,COMMENT,RENAME,SELECT ON mining model NB_SH_Clas_sample;
Audit succeeded.
SQL> COMMENT ON MINING MODEL NB_SH_Clas_sample IS 'i am here';
COMMENT ON MINING MODEL NB_SH_Clas_sample IS 'i am here'
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Process ID: 31648
Session ID: 135 Serial number: 114
SQL> quit
Please help me if i have left out any step
Thanks in Advance

Hi.
Please take a look at the other concurrent thread on model object auditing for more detailed information. If you have Oracle support, please file a TAR with Metalink (http://metalink.oracle.com).
Regards, Peter.

Audit log missing in message in Message Monitor

Hi,
I am facing a weird problem.
I found this in one of my scenario where we are using AS2 adapter and its an IDoc to file scenario.
When I go to details of messages in message monitor in RWB,sometimes the Audit log is empty.
It is happening randomly and not specific to any scenario as later on I found the same problem in some messages from other scenarios too.
I have never faced this problem till now and it was working fine before.
Can anyone please let me know what could be the reason for this as this is difficult for me in case I need to analyse a message and there is no audit log.
Thanks in advance.
Regards,
Shweta

Hi Rajesh,
Doesnt work for me :(((
404 Not Found
The requested resource /messagingsystem/monitor/monitor.jsp is not available
Details: File [messagingsystem/monitor/monitor.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
Thanks.
Regards,
Shweta

Missing "SAP XI Adapter engine" in CCMS Monitor

Dear all,
we try to configure PI CCMS monitor but we can't find the subtree "SAP XI Adapter engine " in Visual admin.
In detail:
the subtree "SAP XI Adapter engine "is not displayed in Visual administrato under
server->service->monitoring->Monitor tree ->Root application .
So we have set to true the value "CCMSEnabled" of seervice "SAP XI AF core" , and we have restarted the instance.
After the restart i DO NOT find the "SAP XI Adapter engine " in
SAP NetWeaver Administrator,
'System Management' -> 'Monitoring' -> 'Java System Reports' -> 'Reports'. From the dropdown list 'Report' choose 'Monitor Browser', and display all monitors
So I can't activate the monitor.
and if the subtree is not present , i can't see the MTE in "SAP XI Adapter engine " RZ20.
Additional info:
- In RZ20 I have my system under SAP J2ee Monitor template->All system
but the MTE "J2EE Applications" is grayed.
- In file application.xml under /usr/sap/ccms/XIT_10/j2ee<server0> i do not find the tag:
<app name="application sap.com/com.sap.aii.af.app">
<node>\XIT\XIT 10 Appl .... sp30t0\SAP XI Adapter Engine</node>
</app>
I think this is the correct procedure that we have done in other different landscape whithout problems.
Is there something else to check ?
I've alredy checked following Blogs
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Thanks in advance
Steven

Hi Sekhar,
I am using PI 7.0 instead so I have followed the instruction in (http://help.sap.com/saphelp_nw70/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm) instead.
The problem is, Adapter Engine is still not listed as one of the application avaialble for Monitoring in Visual Admin even though the SAP XI AF Core has definitely been set with CCMSEnabled = true.
Any further suggestions?
Thanks,
Wi

Unable to see audit log in Adapter Engine (Communication channel monitoring

Similar Messages

Maybe you are looking for