Unable to see contacts since 7.0.6, unable to see contacts since 7.0.6

since I updated to 7.0.6 I am unable to see the contacts in my phone. I know they are there because if I click in a blank spav=ce, the whole card then appears; but I see only blank spacec in list view

Within Contacts, tap Groups at top left. Make sure all contact groups are checked to show, then tap "Done" at top right.

Similar Messages

  • Hello! Ever since I upgraded my iPhone 5s to IOS 7.1, I am unable to access the iPhone Keyboard if I access contacts the recent calls tab. I am also unable to access the keyboard if I want to search for a contact as long as I went through the recent calls

    Hello! Ever since I upgraded my iPhone 5s to IOS 7.1, I am unable to access the iPhone Keyboard if I access contacts using the recent calls tab. I am also unable to access the keyboard if I want to search for a contact as long as I went through the recent calls tab. Has anyone a fix for this problem? If you want to try it out, do the following?
    Dial a number from your iPhone Keypad. After cutting the call, try to save the number you just dialled to your contacts by choosing the new contact option. You will see that you will not be able to key in the name of your new contact.

    Works fine for me.
    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • Since the last software update, I am unable to add new contacts or change existing contacts - neither if I use the green Phone app nor using the brown Contacts app. Any suggestions?

    since the last software update, I am unable to add new contacts or change existing contacts - neither if I use the green Phone app nor using the brown Contacts app. Any suggestions?

    *Update*
    I thought I had found the offending 'app' namely "Songpop."
    I regularly use "Songpop" on my phone late at night via my wifi connection.
    All enteries on my phonebill are at midnight (even though I have a data allowance it was excluded from allowance). I switched 3G off on Friday, played "Songpop" at midnight and at the exact time I got a "Server Error" message.
    I posted a message on the "Songpop" support forum.At first they said this was a problem relating to my ISP.
    I have spoken to my ISP and asked if there are connection drops at the time I have been billed (ie to establish if my wifi dropped and 3G kicked in without my knowledge) and have been advised that there aren't any connection drops at that time.
    "Songpop" have now responded that "This is an issue to take up with Apple Support"  see: http://support.songpop.fm/songpop/topics/playing_songpop_on_phone_via_wifi_but_i ncurring_download_data_charges_for_3g_useage?utm_content=topic_link&utm_medium=e mail&utm_source=reply_notification
    Hopefully someone at Apple can respond ....

  • I sync my vcard contacts but  unable to see in iphone

    i sync my vcard contacts but  unable to see in iphone

    I, too, am looking for the same answer. Since I created my first Apple ID when I purchased an Apple G4 computer, my login has always been the first part of my email address. When setting up my iPad for "Find my iGadget", I was required by that login to change my Apple ID to the full email.
    Now, any attempt to use iTunes, App Store, or whatever, from my iPad defaults the ID to the old one, with no way I have found to change it.
    Since the rest of Apple Corp is just fine with the change, and everything linked to the old one is now linked to the new one, I doubt one is required to use the old one in iTunes for anything. Fact of the matter, the whole issue is that it recognizes that the old ID no longer in existence. There just is no intuitive way to make it all better.

  • TS3899 I had to change my email password so now have to do the same on the ipad. but when I go to settings-mail contacts etc- I can see my accounts but I am unable to do anything with them (they are light gray not regular bold black). now what?

    I had to change my email passwod so now have to do the same on the ipad. when I go to settings--mail contacts etc.- I can see my email accounts but I am unable to click on them to change them. they appear light gray instead of bold black. how do I activate them so they are accessable to change the password?

    I had to change my email passwod so now have to do the same on the ipad. when I go to settings--mail contacts etc.- I can see my email accounts but I am unable to click on them to change them. they appear light gray instead of bold black. how do I activate them so they are accessable to change the password?

  • Unable to create custom phone labels for new contacts since the upgrade

    I have a AT&T iphone 4 version 4.3.1 and since the last couple of recent upgrades I have been unable to create custom phone labels for any new contacts because the lower label options are gone. This is only a problem with new contacts. My existing contacts with custom labels are still there and if I edit those contacts the table that has create custom labels is also still there, but not for new contacts. Has anyone else noticed this problem.

    If you read the error above about the hash and manifest, you will se this is a RB Setup error and not a CM12 error. You would be better to post your question in the SQL forum or better yet to use BIDS instead.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • I have an iMac for work and I am leaving the company. How do I clear the computer so that my soon to be former company is unable to see my personal information Ie. - internet, contacts, etc...

    I have an iMac for work and I am leaving the company. How do I clear the computer so that my soon to be former company is unable to see my personal information Ie. - internet, contacts, etc...

    Follow these instructions step by step to prepare a Mac for sale:
    Step One - Back up your data:
           A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
           B. Clone to an external drive using using Carbon Copy Cloner.
              1. Open Carbon Copy Cloner.
              2. Select the Source volume from the Select a source drop down menu on the left side.
              3. Select the Destination volume from the Select a destination drop down menu on the right
                  side.
              4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
                  sure to opt for that.
                   Destination means a freshly erased external backup drive. Source means the internal
                   startup drive.
    Step Two - Prepare the machine for the new buyer:
              1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
              2, Remove any Open Firmware passwords or Firmware passwords.
              3. Turn the brightness full up and volume nearly so.
              4. Turn off File Vault, if enabled.
              5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
    Step Three - Install a fresh OS:
         A. Snow Leopard and earlier versions of OS X
              1. Insert the original OS X install CD/DVD that came with your computer.
              2. Restart the computer while holding down the C key to boot from the CD/DVD.
              3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
                  Optionally, click on the Security button and set the Zero Data option to one-pass.
              4. Install OS X.
              5. Upon completion DO NOT restart the computer.
              6. Shutdown the computer.
         B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
             Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                       it is three times faster than wireless.
              1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
                  Utilities window appears.
              2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
              3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
                  on the Erase tab in the DU main window.
              4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
                  and set the Zero Data option to one-pass.
              5. Click on the Erase button and wait until the process has completed.
              6. Quit DU and return to the Mac OS X Utilities window.
              7. Select Reinstall Lion/Mountain Lion and click on the Install button.
              8. Upon completion shutdown the computer.
    *If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

  • Unable to see my contacts in icloud.

    I Am unable to see my contacts in icloud.com

    That is often because they don't belong to the iCloud account on your device.  Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section).  If you have the Default Account setting there, what accounts are listed and which one is set as your default?

  • Unable to sync contacts and calendar to my Blackberry since installing Maverick (worked before).  Hunted all over for iSync and it can't be found?

    Ok so what have you done with iSync in Maverick?
    I have a Blackberry Curve 9320 and until I "upgraded" to maverick I was able to sync my calendar and contacts using Blackberry desktop.  Now I see the error sync service disabled.  Looking on your help there doesn't seem to be anything that tells me how to enable sync ..
    However, hunting around I can find sync services but am unable to do anything with them - i.e. no preferences, etc.
    I've looked at your "Advanced" help and the help refers to earlier versions of OSX.

    Dear Friend!
    You are not alone! and im also got the same feeling with you!
    what a "BIG" company with a poor customer service! everytime you read from other's complaint, the so-called Administrator or BlackBerry Technical Advisor would ask you to "contact your mobile service provider and have them engage BlackBerry support for live investigation, diagnosis, and resolution. "!
    that mean no answer for your, go away?!
    i used Q10 for a month with my icloud account for calendar and contact.. after few days of "honeymoon", the sync suddenly failed! and no more cal sync, and even the contact is.... sigh.... totally messly!
    and you will find that... no help from BB, no advise from BB, (may be the said advise is the best answer from BB), no one cares the issue.
    Yes! i agree with you! the keyboard is great!!! some of the new features are wonderful.... but those basic function.... hahaha!! no more!
    I feel very disappointed to BB and go back to my ip5... but i keep the q10 in my room... i'm still waiting one day, the bugs are fixed...
    just a sharing with you, and you are not the only one... 
    Cheers.... 

  • HT4623 Since upgrading my iPhone 4 to ios6 I am unable to access my contacts any longer when addressing email

    Since upgrading my iPhone 4 to ios6 I am unable to automatically access my contacts when addressing emails. Works fine for text.

    Scalesy05 wrote:
    I there a fix for this yet?
    Why would there be a fix?  YOU are having the problem.  I'm not, no one I know is having the problem.  No fix is needed.
    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.  Have you been through any, if not all of these troubleshooting steps yet?

  • I have a Samsung Convoy "dumb" phone, and I plan to keep it until Verizon forces me to some **** overpriced "smart" phone.  Since they migrated Backup Assistant to "the Cloud", I am unable to print a hard copy list of contacts. The web site just runs you

    I have a Samsung Convoy "dumb" phone, and I plan to keep it until Verizon forces me to some **** overpriced "smart" phone.  Since they migrated Backup Assistant to "the Cloud", I am unable to print a hard copy list of contacts. The web site just runs you around in circles, never getting to the answer of how to print out contacts.  I'm sure the marketing people and web creators just love this Frankenstein monster they have built, but for me and my phone, it's just a huge pain in the ***!  Do they plan to fix this, or just let us dinosaurs go away and die?

    there is a point : no workie
    how hard would it be to place my (or yours I am told) iPhone4S on a city block curb………..
    and just walk away.. .. ..

  • TS3988 I get an unable to contact server error when i try to sign in..I don't see where there are outages.

    I get an unable to contact server error when i try to sign in..I don't see where there are outages.

    I am also having this problem.
    I'm trying to log-in from a PC. I tried both Chrome and Firefox and am getting the same error.

  • HT4436 I updated the software on my iphone to 7.0.4 and since then all my contacts are gone. I tried to sign into icloud and it said my account is not verified. It said I should go to my mail to see how to verify my account but there is no instruction in

    I updated the software on my iphone to 7.0.4 and since then all my contacts are gone. I tried to sign into icloud and it said my account is not verified. It said I should go to my mail to see how to verify my account but there is no instruction in my mail

    Hi stanlaw,
    Welcome to the Support Communities!
    The information below should help you with this.
    Associating and verifying email addresses with your Apple ID
    http://support.apple.com/kb/HE68
    How to verify the primary email address for your Apple ID
    When you first create an Apple ID (using your email address) a verification email will be sent to that address. If you sign in to your Apple ID from the link in that email, the email address will be verified as the primary email address for your Apple ID. You can also resend the email verification if the email address is not verified:
    1. Sign in to My Apple ID to manage your account information.
    2. Click Resend under Primary Email Address.
    3. Verify your changes by following the link in the email you will receive from Apple and signing back in to your account.
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • HT4059 ibook app is not working in my ipad2, i can see stored books but unable to open them. this happened since i hv updated to ios6. ipad wasnt jailbreak. kindly assist me

    ibook app is not working in my ipad2, i can see stored books but unable to open them. this happened since i hv updated to ios6. ipad wasnt jailbreak. kindly assist me

    Having the same issue, can someone please enlighten us?

  • Since OS 6 upgrade unable to sync contacts and calendar, receive the following error message: Help Apple improve its products by sending us diagnostic and usage information about iCloud.  By sending this message, you agree that Apple will collect and use

    Unable to sync contacts and calendar with HP Laptop using MS Outlook 2010 and I-phone 4gs since OS 6 upgrade

    The activation server is gone for AA7, but not AA8 as understand it. You will need to do the updates for AA8 to be effective on Win7. It is questionable that it will run on WIn8 (I have no clue for a MAC).
    Your conversation is an example of how many of us got here in the first place. It is fantastic that you were able to hold on and get the problem resolved. Not exactly sure of the solution, but there does seem to be light at the end of the tunnel for folks. Normally, with activation problems like yours, we recommend calling Adobe Support for them to reset the activations. I was just wanting to get a heads up about AA8 on the newer systems. Folks have been successrul on Win7 with the updates, but the results for Win8 are still not known in general. There have been some suggestions, but nothing more. As long as it works for you that is great. For our info, what OS are you running?

Maybe you are looking for

  • Error due to SAPAPPL1.005 (Disk 2)

    Hi friends i am getting error during the installation , can you please tell me what could be the reason for this error. or from wheres can i download SAPAPPL1.005. java version "1.4.2_12" Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_

  • I subscribed to iTunes Match. How do I sync other devices like my iPod and home computer

    I subscribed to iTunes Match  how do I sync other devices like my iPod and home computer?

  • How can I alt tag the TOC button that appears at the top of the menu?

    Running the current version of Cp7 on a windows 7 machine. A 508 hang up once again: The customer insists on an active TOC for the project file. We've activated the TOC and it works fine, but there's a secondary TOC expand/collapse button located at

  • How to import youtube video into premiere cs4

    I installed adobe premiere cs4 and was really astonished by the fact that it's not possible to import a video downloaded from YouTube, but it is needed to convert it firstly. This application is weight about 3GB on my hard disk and now I must search

  • Playbook

    The headphone jack on my playbook is not working, only left side plays. It is not the headphones. I can't find a way to contact RIm to get this repaired. Why is it so difficult to contact RIM customer service ?