Unable to see created folder in bookmarks

I migrated bookmarks.json from old system into new machine , there is a folder in that, when i try to bookmark a new page that folder is not showing up, folders created in new system only shows up, how can i view folders which are migrated?
Thanks in advance
Anil

Similar Messages

Unable to see Shared Folder / Drop Box on wired LAN

I am unable to connect to another Mac on my wired LAN (Netgear wndr3700), and it is unable to connect to my machine. We cannot see each others’ Public Folder / Drop Box.
We can see each others Macs in the Shared section of the Finder’s sidebar, but trying to connect fails: “The server … may not exist or it is unavailable at this time…”
Both are running 10.6.4 Snow Leopard SL. No Windows machines on the LAN - so this should be AFP only.
We can see and connect to another Mac running 10.4.11 Tiger with no problem. BUT it is unable to connect to either 10.6.4 machine.
Firewall on both machines: On; File Sharing (AFP) set to “Allow incoming connections”; Stealth mode Enabled (toggling doesn’t change); “Automatically allow signed software to receive incoming connections” is Off; “Block all incoming connections” is Off. Some other apps and services are set to Block… (krb5kdc, numbed, smbd…) AppleFileServer is set to Allow.
Sharing: File Sharing Service only is On:
Hard Drive - Everyone - Read & Write
Users - Everyone - Read Only
~ (My Home Directory) - Everyone - Read Only
Public - Everyone - Read & Write
Drop Box - Everyone - Write only
Thanks for any suggestions.

It isn't directly related to the firewall, I'm having the same problem between two up to date machines, and to be sure, I have disabled the firewall on both. however, If i connect using the connect to server dialogue, I get through just fine. I believe it could be a dns resolution problem.
strike that.
Just tested, check in advanced network settings, and if you have any wins servers listed, remove them.
krb5kdc needs to be allowed to accept connections, for me it popped up in little snitch when it was authenticating.

Unable to name created folder on iPhone 6

This is weird, I created a folder and I'm unable to name it.

Ive taken both apps out, dragged them to the home screen, attempted to re-create the folder on the home screen, same thing. I haven't tried through iTunes yet, but it's just odd why you can't name a folder with these apps, I even added urban spoon, same thing.

Unable to see created File System Repository

Hi,
I have created a File System Repository following the link below:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
I am not able to do user mapping by going in personalize as I can found my windows System there.
Do I have to create a new system mwhere else.
BTW, I am mapping to a remote window system with the KM.
Please give useful suggestions.
Points given for problem solving answers.
Sumit

Hi,
Example configuration of a WINDOWS® file system repository manager given in the Help.sap.com.
Creating System:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Specifying User Mapping:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Senthil K.

Not able to see "opencat" folder after Hyperion Interactive Reporting 11.1.2.1 installation

Hi,
After Hyperion Interactive Reporting 11.1.2.1 instllation I am unable to see "opencat" folder or directory under this path /Oracle/Hyperion_Home/EPMSystem11R1/products/biplus
As per my understanding we keep .oce files in this location. Do we need to create "opencat" folder or directory manually under
this path /Oracle/Hyperion_Home/EPMSystem11R1/products/biplus ? won't it come by default with Hyperion Interactive Reporting Installation?

Usually in 11.1.2.1 the folder will be "EPMSystem11R1\products\biplus\data\Open Catalog Extensions"
I haven't seen a opencat folder.
Can you check the migration logs.Also check permission for the user on the folders.
Thanks,
KK

Unable to view a folder in InfoView

Hi,
A user is unable to see a folder in InfoView even though he is added to a Windows AD sub-group. The sub-group is nested to a parent Windows AD group and parent Windows AD group is added to this folder.
Other members in the group are able to view the folder, but not this member. When I checked the u201CMember Ofu201D property for this member, the Parent Windows AD group is not seen.
We are using Windows AD credentials for logon to InfoView and Business Objects XI 3.1 version.
Have anyone came across similar issue.
Thank you.

Hi,
Restart the CMS server once and test the issue again. Also refer the following SAP Notes:
SAP Note - 1328995
SAP Note - 1325901
Regards,
Nakul

Folder created, yet new bookmarks are not shown the folder as available

I created a folder which has several bookmarks in it. However, new bookmarks are not given this folder as an option for saving.

One possibility is that you are having problems with the bookmarks database getting corrupted.
I suggest as a precaution you immediately do a manual backup of your bookmarks and keep them somewhere safe outside the firefox profile or program paths, such as on the Windows desktop.
* see [[backing up and restoring bookmarks]]
Have you created the folders within the folder unsorted bookmarks ? if so they will be at the bottom of a long list, look there first of all (note the very small scroll arrow-heads / triangles on the main dropdown list) ; if you do not find them then have a look at
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

New Firefox seems to be missing the ability to create a new bookmark folder--any help is appreciated.

I just updated to the new Firefox, and now, when I try to create a new bookmark folder, the option is no longer there (I can see all my old folders, but the option "New folder," which used to be on the bottom of the drop-down menu, is gone. Nor do I see it anywhere else.

Hi, Matt,
I really appreciate the speedy response. I did go into the Bookmarks Folder of the Knowledge Base, but actually don't see any article (I skimmed each of them) that deals with folders. The frustrating thing is that I've been able to create bookmark folders with no problem up until I updated Firefox to the latest version yesterday. Now the option to create a new folder does not appear.
I'm enclosing a screen shot of the dialog box; previously, when adding a bookmark, an option to "create folder" would appear at the lower left of this box.
I'm sorry if I'm missing something obvious. I really appreciate your time.
Best,
Kathy

Unable to see "New from Par" option while creating Custom portal layout

Hi All,
I am unable to see "New from Par" option in Content Administrator. I am trying to create a custom page Layout for which I am need create layout using new par file. I am not able to see this menu option. Does anyone know from where to enable this option?
Nitesh

There is no option like "new from par" from ep 7.
Create an iview based upon portal components.
check the below link for creation
http://help.sap.com/saphelp_nw04/helpdata/en/f5/eb50360e6a11d7b84900047582c9f7/frameset.htm
Koti Reddy

Creating a new folder in bookmarks

I want to create a NEW folder in bookmarks and THEN add bookmarked pages to that folder.
I've actually searched support for a specific solution or instructions and found none. Currently, I can not find any instructions or options for creating a folder. I don't want to just bookmark the current page I am on. I want to create a folder based on topic and then, later, add bookmarks to that folder when a particular page is related to that topic.
How?

Note that you can also create a new folder via the Organize button in the Library window.<br />
The Organize is the first of the three buttons on the toolbar in the Library (Organize, Views, Import and Backup).

Created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

You are using an older version of firefox, upgrade your browser to Firefox 8 and try
* getfirefox.com

How do I create a new folder in bookmarks?

I followed the suggestions from post a year ago, but the answer I was directed to no longer works. This used to be easy until they changed the bookmark section on Firefox. Wondering why there does not seem to be a choice simply marked "New Folder" or if there is, where is it?

To create a new folder in Bookmarks: Click on "Bookmarks". Then click on "Bookmark this page". A small pop-up screen will have fields for "name" (of the page), "folder", and "tags". To the far right of the "folder" field are two downward arrows. Click on the one farthest to the right. This will show you '''all''' the existing folders, and an option to make a "NEW FOLDER".
Before you click on this, you may want to select an existing folder to put the NEW folder into. If so, click on the folder of choice, then click on the "NEW FOLDER" option. The new folder will appear at the bottom of the menu. You can name it now, or later. When all fields have been filled to your satisfaction, click on "DONE". I'm not sure how you'd do it without starting with a page you want to save, but you'll find a way, right?

Unable to see my project template after creating the same

Hi All,
I Created one (Multi Org)Organization and enable all the required secutiry profiles (HR: Business Group, HR:Security Profile, HR:User Type,MO:Security Profile),When i am creating the Project Template unable to see the same template its moving to some other Org its showing.
what i have to check in setups. could you please any one.
Thanks

Hi Murali,
Can you check whether you have setup the following profile options for that responsibility to see the created templates.
PA: Cross Project User -- Update
This option allow you to update the project with out assignment on the project.
PA: Cross Project User -- View
This option allow you to view the project templates by using that responsibility.
Best Regards,
Sreenath

Unable to see User eixt macro in SCM 4.1 - When creating a Collective Macro

Hello :
we are SCM 4.1. We have a need to run 4 macro in a sequence. I felt that I could create a collective macro and list the macro's.. The macro are user exit macro's. and I am unable to see them in the drop down list.. tried to search OSS Notes . did not find a lot of info.
Would appreciate any insights and suggestions. We are on SCM 4.1
Raghu

Hello Andy
Thank you for the reply.
I am trying to create a "Collective MAcro" which would run 4 macros. In hte COllective macro there is a drop down option to select the macro that we want to run.. We can select upto 6 macros..
In this drop down list, I am unabel to see the 4 user exit macros. The macro that I want to run in a sequence are "user exit macros". They are active and can be executed one at a time in Interactive Planning.
I am creating a "Collective Macro" as this would ensure that the 4 user exit macros are run in the correct sequence.
OSS note 907177 refers to availabilty of "badi macros" in Collective macro. This is only for SCM50..
We are in SCM 4.1. ANy pointers can be of great help
Raghu

On Mac and Firefox 3.6.6., I can't create a new folder in organize bookmarks because it is grey. I used to be able to do this. How do I create a new bookmark?

On a Mac and Firefox 3.6.6., I can't create a new bookmark in the organize bookmark folder, because it is gray. I used to be able to do this. How do I create a new bookmark in the bookmark folder?

For what it's worth, here's the bug on this: https://github.com/adobe/brackets/issues/1577. It will be fixed later when we move the Getting Started files out of the install folder.
- Peter

Unable to see created folder in bookmarks

Similar Messages

Maybe you are looking for