Unable to see days in Week view.

I open my iCal, and switch over to Week view, but the days of the week don't display on the top. My brother's Mac and friends display the days.
I have tried to reinstall iCal, and also removed the plist file and rebooted, and days still don't show up. Everything looks good in Day and Month views.
Any ideas or hints about what to do to get the days to display while in Week view?
Thanks in advance for your responses!

barns,
Apple Discussions is just a user-to-user forum. You should not expect any response from an Apple employee.
Also, check your settings in:
System Preferences...>International>Formats>Dates>Customize.
There will be a Show: field which has Short/Medium/Long/Full. I am not sure which one fills iCal. Change them one at a time and experiment with individual settings.
As you can see the International Preference has additional time settings in:
System Preferences...>International>Formats>Times>Customize.
I am not using Leopard, so I am not certain about the exact configuration of that preference pane.
;~)

Similar Messages

Seeing times in day and week view

Is it possible to see times (eg 7.00am, 7.30am, 8.00am, 8.30am, 9.00am, etc etc) along the y axis in day and week view of iCal? I can only see actual times when I in the process of making appointments, ie when wiping my cursor over a section of the page.
johnC

See Fred Grieve's answer and John Maisey's solution here:
http://discussions.apple.com/thread.jspa?threadID=1868347&tstart=0

Determining Hours Displayed in Day and Week View

Hi there,
Even though I have determined the Day hours to be, for example, 7am to 6pm in iCal Preferences, and I have determined the number of hours to be shown on the screen to be, for example, 11 hours, I still have to scroll down to fit my Day's hours in the view. In addition, the non-day hours (i.e. midnight to 7am, 6pm to midnight) are still being shown.
Is there any way of removing the non-day hours, and in effect the scrollbar so that on opening iCal, the correct hours as I have determined them are displayed?
Why would I want to open my Day or Week view and have at the top (what I would expect to be the first thing of my "Day") to in fact be Midnight (and go back to sleep)?
Am I missing something or does this not work the way I think it should, or thought it did?

See Fred Grieve's answer and John Maisey's solution here:
http://discussions.apple.com/thread.jspa?threadID=1868347&tstart=0

ICal events disappear only in Day and Week views

Using iCal 3.0.2, I have suddenly acquired a new behavior. Several "subscribed" calendars appear fine in Month view, but their events do not appear in Day or Week view.
I have deleted Caches > com.Apple.iCal and I have deleted Libraries > Calendars > Calendar Cache. Neither has had any effect. I also tried deleting Preferences > com.Apple.iCal.
Any ideas on how to be able to see these events in the Day or Week views?
Thanks very much,
Gus

Still no date headings when my calendar is views in the Day and Week views. All of my appointments are there. The days of the month appear in Month view. But when I change to week or day, I don't know what day I'm looking at because there are no dates. Only "2010" appears in the upper left.
Any ideas? I couldn't be the only one this has happened to!
Thanks, Wendy

Adding reminders to my calendar items is no longer an option after the software upgrade. I also can't get to day and week view, only month view. What's a possible solution?

Adding reminders to my calendar items is no longer an option after the software upgrade. I also can't get to day and week view, only month view. What's a possible solution? I'm using Andriod version 4.4.2 with kernal 3.4.0.

@MaloneTP
Thanks for keeping me updated! Do you see the screen options displayed in the following link: http://bit.ly/T2koBL for changing the calendar view options in Kies Air? Also, let me know if you're able to add a Reminder by following these steps: http://bit.ly/T2l9dY. Keep me posted. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

ICal Date Headings Missing from Day and Week Views

Good morning,
A few days ago, the date headings disappeared from the Day and Week views in iCal. I can see the date heading in Month view, but when I switch back, the dates are missing. All of my events are there, and correct.
I have resolved font duplications and restarted iCal, to no avail.
Thanks for your help.
W

Still no date headings when my calendar is views in the Day and Week views. All of my appointments are there. The days of the month appear in Month view. But when I change to week or day, I don't know what day I'm looking at because there are no dates. Only "2010" appears in the upper left.
Any ideas? I couldn't be the only one this has happened to!
Thanks, Wendy

Wrong month displayed in day and week views

I recently noticed that whereas the current month is displayed correctly in Month view, in Day and Week view the date is displayed as in January. This has been the case in both February and now March.
I sync my iCal with my mobileme account and my iphone and these don't have the same problem.
I have removed my com.apple.iCal.plist file and rebooted, to no avail.
Any suggestions what else I can do?

Thank you so much Ferd II
I kick myself. Though too my mind it is not logical to look inside Language & Text for a problem with month names. I forgot that last month I changed the date format to yyyymmdd in order to make it more logical sorting things. I have now reverted to day of week, day of month, month, year, and everything seems fine.

ICal won't show or print calendar in 5 day per week view

Even though I have checked the option under preferences to view my calendar with 5 days per week, it still shows on screen and prints with 7 days per week. Anyone have any ideas to remedy this?
Thanks-
Stacy

yes there is a problem with the web view formerly published pages timing out. that I need answers to myself.
regarding losing the option to publish in ical 4, what happened is when you upgraded your mobile me calendars it took all your published "on my mac " calendars and stored them at me.com which for now has no web view associated with them-they can only be shared by subscription.look at you ical and you'll see all your calendars now under [email protected] here's the work around:make sure her availability calendar is up to date. in ical go to file>new calendar>on my mac. give it the exact name of the one you had published. now select that calendar from me.com go to file>export-export the .ics file to the desktop-now go the your newly created "on my mac" calendar and import that file.-now with the "on my mac" calendar ical will allow you once again to publish. and if you kept the name exactly the same it should have the same web address-now if will only stop timing out!

Calendar showing numbers instead of name of day in week view

Mavericks Calendar is showing numbers from 1 to 7 in stead of the name of the day (mon, tue ... etc) in week view. Any solutions?

dike,
If you refer to the Function Help in the Inspector, you will see that in Numbers WEEKDAY returns a number representing the day of the week. To convert that to the name of the day, you must wrap WEEKDAY in a DAYNAME function, as follows:
Regards,
Jerry

More days in week view

Found a tip recently to change the dafault number of days within the week view of Calendar:
Change to 14 days:
Close Calendar
Open Terminal
enter following command within Terminal:
defaults write com.apple.iCal CalUIDebugDefaultDaysInWeekView XX
XX to be replaced by the amount of days you want to show!
Resetting it to the default of 7 days:
Same code within Terminal, XX replaced by 5 or 7......

barns,
Apple Discussions is just a user-to-user forum. You should not expect any response from an Apple employee.
Also, check your settings in:
System Preferences...>International>Formats>Dates>Customize.
There will be a Show: field which has Short/Medium/Long/Full. I am not sure which one fills iCal. Change them one at a time and experiment with individual settings.
As you can see the International Preference has additional time settings in:
System Preferences...>International>Formats>Times>Customize.
I am not using Leopard, so I am not certain about the exact configuration of that preference pane.
;~)

View iCal's day and week view in reverse chronological order

Greetings iCalers,
When I think about day/week calendars, with the Y-axis being times of the day as in iCal's day/week views (e.g. "3:00 AM", and "5:00 PM" are in the leftmost column), I think about times building up to midnight from the bottom—i.e. the day starts at 12:00 AM on the bottom, with 1:00 AM above that, and the day ends with 11:59 PM on the top. I've learned that this intuition is atypical, and all calendaring systems I've come across work in the reverse direction, in line with the majority of people's intuitions.
I'm wondering if there's a way to get iCal to display in the reverse-chronological order. I suspect there isn't, and I've never seen a terminal command or apple script for it, but I'm hoping there is. If anyone know and could post it here, that would be great!
Thanks!
-Scott
Message was edited by: scottclayton

It's cool, I figured out a solution: get over it and stop worrying about trivial issues to the point of excessive fussiness.

Unable to see SAP BusinessObjects Document Viewer template in 7.4 portal

Hello Experts,
We are looking to integrate dashboards created with BOBJ design studio into enterprise portal (NW 7.4). We have followed the steps mentioned in the blog Integration of BOBJ with SAP Portal.
Namely:
1. Taken the com.sap.businessobjects.iviews.par and com.sap.businessobjects.iviews.templates.epa files from the BI server
2. Imported the EPA file into the portal
3. Converted the com.sap.businessobjects.iviews.par file into EAR file and deployed it into the portal
4. Created System alias for the BI system
5. Configured SSO between portal and the BI server
After doing these steps when trying to create the Business Objects iView we are unable to see the SAP BusinessObjects Document Viewer template in the portal. Can anyone let me know if we have missed some additional configuration that has to be done?
Regards,
Saurabh

Hi Experts,
Issue has been resolved. After importing the EPA file into the portal, we missed out restarting the portal. Once this was done I am now able to find the SAP BusinessObjects Document List and SAP BusinessObjects Document Viewer templates in the iView creation wizard.
Regards,
Saurabh

How can I see times in 15 minute increments in day and week views in lightning?

I have many events that are less than an hour in length. Is thre any way to have lightning show times on the left side in 15 minute intervals instead of 60?

I have many events that are less than an hour in length. Is thre any way to have lightning show times on the left side in 15 minute intervals instead of 60?

Still not seeing times in week view

*I still have not gotten a solution* to why the hourly times (eg 8 a.m., 9 a.m., etc.) no longer show in the left column of iCal in either the daily and weekly screen views. Only Noon shows in the column under the year header (2008).
If I print a calendar for any of the three views, the times DO show on the printed page as expected.
The problem showed up on this machine after the upgrade to 10.4.0. Dates do show on another machine on the same home network running 10.4.11. It is a basic iMac with only the fonts that came with it or software installed.
I have removed the iCal prefs as suggested in a previous post, but that had no effect. I have adjusted my prefs to the day range and hours to show at a time and there were no changes. My pref setting are exactly the same as the other computer that shows times.
I also removed iCal yesterday and reinstalled the program from the Tiger OS disc. No change.
It is not the font conflict that causes the date of the dock icon to be misaligned (when don't use the Apple Helvetica). I have turned off/on fonts in font book to check. I have over 400 font families, but normally only about 50 families are active.
*I have been trying for since November 2006 to get a solution to this*. Does anyone know?
The closest Apple store is over two hours away and when I did visit it once, I was told I had to make an appointment on a future day to see a Mac expert.

Greetings,
The calendar will always have all 24 hours on it. What you can do is set the number of hours you want in the day, in preferences, which will scale the hours for you, then slide the screen to show the hours that you want, and then quit iCal. Restart it, and it should come up with the same view that you left with. This way it looks like just the hours you selected.

Unable to see select options in view

HI ,
I have the following code in the WdDOINIT method of my view for viewing a field as a select option...
DATA: l_ref_cmp_usage TYPE REF TO if_wd_component_usage.
l_ref_cmp_usage =   wd_this->wd_cpuse_select_options( ).
IF l_ref_cmp_usage->has_active_component( ) IS INITIAL.
l_ref_cmp_usage->create_component( ).
ENDIF.
DATA: l_ref_interfacecontroller1 TYPE REF TO iwci_wdr_select_options .
l_ref_interfacecontroller1 =   wd_this->wd_cpifc_select_options( ).
DATA:
    l_r_helper_class TYPE REF TO if_wd_select_options.
l_r_helper_class = l_ref_interfacecontroller1->init_selection_screen(
data lt_range_table type ref to data.
CALL METHOD l_r_helper_class->create_range_table
EXPORTING
    i_typename     = 'BUKRS'
   i_length       =
   i_decimals     =
receiving
    rt_range_table = lt_range_table
CALL METHOD l_r_helper_class->add_selection_field
EXPORTING
    i_id                         = 'BUKRS'
   i_within_block               = mc_id_main_block
    i_description                = 'Empresa'
   i_is_auto_description        = abap_true
    it_result                    = lt_range_table
   i_obligatory                 = abap_false
   i_complex_restrictions       =
   i_use_complex_restriction    = abap_false
   i_value_help_type            = if_wd_value_help_handler=>co_prefix_none
   i_value_help_id              =
   i_value_help_mode            =
   i_value_help_structure       =
   i_value_help_structure_field =
   i_help_request_handler       =
   i_lower_case                 =
   i_memory_id                  =
   i_no_extension               = abap_false
   i_no_intervals               = abap_false
   i_as_checkbox                = abap_false
   i_as_dropdown                = abap_false
   it_value_set                 =
   i_read_only                  = abap_false
   i_dont_care_value            =
Besides this, the WND_SELECTION_SCREEN view is embedded in the respective container as follows...
Tray - >Container - this container has the WND_SELECTION_SCREEN.
I can see the tray in the view cannot see any field (expectation was to see a select-option for BUKRS.
Any hints? Am i missing something. I have followed the tutorial for select options in webdynpro abap.
regards,
Priyank

Hi Sascha,
No i cannot see the buttons either.
Following is how the view is embedded.
View - > Tray - >viewcontaineruielement-> wnd_selection_screen.
Am i missing something?
regards,
Priyank

Unable to see days in Week view.

Similar Messages

Maybe you are looking for