Unable to see English Text in Crystal Report

Hello Experts,
I have crystal report on top of ECC. I have one table which has G/L account and G/L Account description. I am using this fields as parameter, I am getting only German and other language except English language. I checked in ECC and I can see G/L account Description in English but not in my Report.
We are using BOXI3.1 and Crystal Reports 2008.
Can anybody help in this proble?
Thanks
Ravi

Ingo,
Let me explain you again, I have crystal report, where I have 4 tables linked. I have one table called SKAT table and I I have SPRAS field in that table which is language key, It will show you all the langauges available in that table.
SAP side, when I enter SPRAS as EN and excute, I see only english records for all G/L description. When I enter German in SPRAS fiels, it will show German G/L Account Description.
But In Crystal Report, I have created parameter for this SPRAS field, User will select which language they want to select.
Now the problem is when I create the Paramter on SPRAS field and I run the report, In the Parameter selection, I see D, C and 1 but I don't see EN.
If user want to see EN , how they can see?
I hope it is clear this time.
Thanks
Ravi

Similar Messages

Unable to see Oracle driver from Crystal Report's Database Expert

I have installed Oracle client (version 10g) on my laptop that also has Crystal Reports 2008 ver 1 SP3. I then installed data driver 5.3 (Datadirect ODBC database driver) but I canu2019t see the Oracle driver nor the Oracle wire protocol driver from crystal reportsu2019 database expert. I have checked the path and it correctly points to the oracle client (c:\orant\bin). I am running Windows 7 professional.
Kindly assist.

Hi Serah Muiruri
In Windows 7 64 bit ODBC Drivers 32-bit is stored under "C:\Windows\SysWOW64"
DIRECT PATH C:\Windows\SysWOW64\ODBC.EXE
Right click ODBC.EXE
Create a shortcut and place it on the desktop/Right Click and Pin to Task bar/Start Menu.
It is easy to access.
CR Oracle ODBC Driver 5.3 CONNECT CREATION STEPS
In ODBC Data Source Administrator Select CR Oracle ODBC Driver 5.3
DataSource name: Give any name to identify
Description:(Optional)
ServerName: IP ADRESS:PORT NUMBER/ SERVICE NAME
Eg: 192.168.0.120:1521/orcl
Client Version: slect the client version From the list
To know the connection is correct
Click the button Test Connection
Provide the username/password(Eg: scott/ tiger)
Press OK
Finally Click Apply button. Next OK
Thank you
Pardhu
Edited by: pardhasaradhi.t on Sep 26, 2011 2:41 PM

JRC Export to Text like Crystal Report Designer Export

We need to Export report to Text like Crystal Report Designer Export using JRC. Is this possible? I see export ReportExportFormat CSV, PDF and RTF only. These exports are working, But I need plain text that looks like Text export of Crystal Reports Designer. I see this working in RAS 2008. What I can do to get this with JRC. I am using Crystal Reports 2008 to design reports.
Thanks for any help.
Regards
Raveendra
Clarification

Thank you Jitin.
What could be solution to this problem?
If still I want to go with JRC, Can I write some Java code to perform this export?
I see TextExportFormatOptions and its not working.
If I want to export automatically to text format, what other choices are there?
Basically I need to execute report and generate text file automatically. Text file should look like Crystal Report Designer Exported Text file.
Thank you for your time.
Regards,
Raveendra

See sql query from crystal report without crystal report

see sql query from crystal report without crystal report

Hi,
Depends on datasource type but you could have a look at ODBC trace or if you have access to the SQL Server you could use profiler to monitor the session.
Regards,
Craig
And this will only be of use if you know which Server/Insstance/Database the Report is connecting to...
Please click "Mark As Answer" if my post helped. Tony C.

Problem with vertical text in crystal report viewer

Hi,
I am displaying vertical text in crystal report designer and deploying the report in crystal reports server 2008. The deployed report is being displayed using JAVA in crystal report viewer control.
Problem: Vertical text header is getting collapsed wth other vertical headers.
Please help on this.
Thanks,

Hi Vijay,
I found out another method of retaining all the chart formatting that is done in the preview pane.
Once you have done all the changes then you will find interestingly there is a chart menu option that appears in the tool bar. Once you click on it there is an option "Apply Changes to All Charts".
Select that option, close your preview. Open it once again and you will find that all the settings are still there and the Web Viewer is able to display them properly.
I think that I resolved this.
Regards,
Gourav

Unable to view images in the crystal reports on a jsp

Hi folks,
I am unable to view any image (not even the ones like businessobjects logo) in the crystal reports fetched from the CMS. I am able to fetch the report properly. But I don;t get to see the images in the reports.
If anyone of you know how to fix it. Kindly post it. It's urgent.
PS: It would be great if you could kind of share a check list of things that need to be taken care of while viewing a crystal report with images.

Hi Suresh,
Please check that you have crystalreportviewers11 (for version XI) or crystalreportviewers115 ( for version XI R2) folder in your BO installation and your web.xml has correct reference to it. You can copy this folder over in your web application and
Add an entry in web.xml as follows ( if it doesn't exist)
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/<your application name>/crystalreportviewers115</param-value>
</context-param>
crystalreportviewers11\115 have images folder which contain all the images for Logo and toolbar. Check the images folder in viewers and make sure that they exist.
-Aasavari

Unable to view Dynamic Prompts in Crystal Reports through JSP

Hi,
We are using Crystal Reports, SQL Server and Java in our application. We are using JSP to access Crystal Reports from another machine, get them as "ReportClientDocument" objects and then display them using "CrystalReportInteractiveViewer" object. We are able to view reports with Static Paramter values, but when we try to access reports with Dynamic Parameter values the parameter fields are not visible. It doesn't show any error but we can't see the parameter values.
Any help in this regard will be great. Thanks in advance.

Hi Ted,
We are using the JAVA SDK to fetch the report. These are the steps we do using java.
- Log in to the Crystal Enterprise
- Get the Report Application Factory from Crystal Enterprise
- Get the InfoStore service from Crystal Enterprise
- Retrieve the report by name from Crystal Enterprise
- Open the report in a ReportClientDocument
- Instantiate a CrystalReportInteractiveViewer
- Get the report source from the ReportClientDocument and set it as source for the CrystalReportInteractiveViewer
- Process the HTTP request to view the report
Please let me know if you need any further info.

Unable to Access BI InfoSet in Crystal Reports using SAP Info sets driver

Hi,
I am looking to develop a report on top of BI InfoSet in Crystal Reports. However using the the SAP InfoSets driver I am only able to visualize 'Classic InfoSet' and 'SAP Query'. It does not show the option to import the regular InfoSet as a datasource. I am unable to access the InfoSet built by the db join on InfoCubes that is available in SAP BW System.
Can anybody help.
Thanks,
Amogh

Hi all,
i know this discussion is abaout 2 years old, but i faced a similar problem. I try to get access to the regular InfoSets (SQ02) within a direct connection between SAP and Crystal Reports. Which components and tools did i need to get a connection?
look here: http://scn.sap.com/thread/3365060
Thanx for your help!
Best Regards
David

Unable to see fields of BI Publisher report in MS Office

Hi,
We have a report in BIPublisher(10g). We are designing a template for a report. So from MSOffice, while we are accessing the report, we are unable to see the fields. We were able to see only RowSet. The report is working or able to see in BIPublisher.
This happens very often to us. We will be able to see the fields for some of the reports and unable to see for some reports. I can say we are able to see all the reports in BIPublisher.
Initially we are working in the sytem with 1GB RAM and thought that MSOffice is unable to load the report. Now we are working from a system with 2GB RAM, still same problem.
We did: Open MSWord-->Login to BIPublisher--> Open the folder-->Select the report.then--Insert field.
In the popup window opened, we were able to see only RowSet no fields.
We observed this is happening to the reports which have parameters to be passed
where could be the problem...help us.
Thanks
글 수정: RAJ

Have a look at getXMLdata and downloadXMLdata of schedule service , using these you can get the xml data produced by the report job
getDocumentData and downloadDocumentData will return the document data which is basically a translation of xml data in your output format

Unable to close JDBC connection in crystal reports

Hi,
I have configured crystal reports to use a connection acquired from a datasource created in weblogic server to generate a report. I was hoping that by calling ReportClientDocument.close() i would be closing the connected used to generate the report but that doesnot seem to be the case. I run into a situation where all my connections from the connection pool are being held by the reports and therefore get an exception in the application.
Can anyome please let me know if calling ReportClientDocument.close() will ensure that the database connection used for generating the report is closed? If no, please let me know what needs to be done in the code to ensure that a connection acquired for generating a report is closed.
Thanks in advance
VAMSI

Hi Sanjay,
Once connected right click on the connection an try adding filtering. Check off all except Tables and if you still don't see anything try adding table filtering to see if they show up now.
Thank you
Don

Long Text in Crystal Report for Enterprise 4.0

Hello,
I am creating a report using SAP Crystal Report for Enterprise 4.0 (Version 14.0.2) and the source of data is BEx query via OLAP connection created using IDT. I am using SAP BusinessObjects BI platform 4.0.
The Characteristic (which is hierarchy) in the Rows section of the BEx Query is set to display long text and as such, it displays long text when the query is executed in the BEx Analyzer. However, when it comes to Crystal Report, the short text is displayed in the report.
The Characteristic is 'Item' (0CS_ITEM) and upon going to SAP BW > RSA1 > Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
Can I display long text in the Crystal Report? How?
Thanks,

Hi Jothi,
Short Text and Long Text are associated objects of a Characteristic from a BEx query.
The 'Short Text' will not turn to 'Long Text' by setting the 'Can Grow' option.
In Fact, both are completely different objects.
-Abhilash

Overlapping text in Crystal Report

I am working with Crystal Report 2012. I am suppose to create a Crystal Report which may be exported to pdf . It has certain fields with "Can Grow" property. As a result of all this I am facing overlapping text issues due increase in the text length , I don't want to limit the length of text fields. I require an urgent help to deal with this issues.
Thanks a lot in advance

Hi Dell,
Is this the thing you wanted me to do :
If yes then I did this but I lost the contents of the Group Footer #6b.
Before applying , in-circled are the overlapping text which are possibly lost after the application
Before:
After applying these fields are missing
After:
According to me this might occur due to " Group by " which is removed afterwards.
Waiting for your reply.
-Saurabh

Arabic Text in Crystal Report

I am having issues in displaying Arabic in crystal report. I am pretty sure that the data stored in Oracle (10g) is okay because when I query the same data using SQL Developer or TOAD, it is fetching and displaying Arabic contents as well. However, when the same query is used in the Crystal report, it is converting Arabic text into some weird Characters like ãÎÊáÝ etc. However, when I type Arabic in Crystal report, it is fine. The only issue is when I retrieve Arabic data from the database in Crystal report and try to show it, it converts it into some weird characters.
I am using Crystal Report 2008 version 12.0.0.x and I used the font of the field to be "Arial Unicode" but still of no use. I even tried changing the font setting from "right to left"; still no use. I have also tried using various fonts like 'Arabic Typesetting", "Arial Unicode", "Arial Narrow" etc but problem is still there.
Any suggestions?

Sorry Fahran - not sure I understand. Are you saying that all connections cause the same issue in CR 2011 with SP 9?
SP 9 can be downloaded here:
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htmhttp://search.sap.com/notes?id=0002015092&boj=/sap/bc/bsp/spn/scn_bosap/notes.do?access=69765F6D6F64653D3939382669765F7361706E6F7465735F6E756D6265723D30303032303135303932
- Ludek
http://search.sap.com/notes?id=0002015092&boj=/sap/bc/bsp/spn/scn_bosap/notes.do?access=69765F6D6F64653D3939382669765F7361706E6F7465735F6E756D6265723D30303032303135303932

Hi, need help, displaying text in crystal report

Post Author: decentsimple
CA Forum: Crystal Reports
CR8.5 help, displaying included or not included i
have a win app that calls the report, during rendering of report, the
win app will first create a temp table that holds all the fields for
the report, then the report is accessing that temptable. i want my report to display [not] included text for a field that contains the right value..here is the tricky part, the field is not in the temp table..is there a way for the crystal report to read the value of that certain field that is not in the temptable..so far.. i have a parameter     3 parameters, the value can be B/P/U          ?B / ?P /?U each parameter have its own formula: @havefieldvalue        if {?B} = "T" then            "" else "Not" same for the rest..if the report generated have B     then the report should display B - includedsame for the rest..

you can always use an array if there's no pattern to your positions:
var positionA:Array=[ [100,20], [2,222], [55,2], [201,111], [78,23] ];
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.Event;
import com.adobe.serialization.json.JSON;
var loader:URLLoader = new URLLoader(new URLRequest("https://api.twitter.com/1/statuses/user_timeline.json?screen_name=ScottMitchell"));
loader.addEventListener(Event.COMPLETE, loadComplete);
function loadComplete(e:Event):void {
    processData(e.target.data);
function processData(data:String):void {
    var tweets:Array = JSON.decode(data) as Array;
for(var i:int=0;i<5;i++){
var tf:TextField=new TextField();
addChild(tf);
tf.multiline=true;
tf.width=300;
tf.text =   tweets[i].text;
tf.autoSize="left";
tf.x=positionA[i][0];
tf.y=positionA[i][1];
nextY+=tf.height;

Unable to see substituion variable in the reporting studio

Hi,
I have added substitution variable to the reporting studio the variable name I gave as var1
and value as 2009,but I am unable to see the substitution variables in my reporting studio.
What can be the reason for it?
Thanks

Hello,
you have to quote the value because it doesnt start with a letter.
Every Value which you had to put in quotes in an Calc Script or Member Formula or so, you have to quote in FR Studio too. Planning accepts the value without quotes, FR Studio doesnt.
Bye
Kevin

Unable to see English Text in Crystal Report

Similar Messages

Maybe you are looking for