Unable to see ESR objects in the IR

Hi,
I am not able to map the ESR objects in the IR through the business components the only SWCV I can see listed for Inbound and outbound objects are that of "SAP Basis 7.11".
Need help to fix the SWCV is necessary or what in the ESR SWCV have I not configured to that is not makin the link available.
Would appreciate all the help!
Thanks,
Veena

HI ,
have u followed these below steps :
Procedure:
1.On the initial SLD screen, choose New Business System.
2.Enter a name for the business system.
3.From the list displayed, select Web AS ABAP as a technical system type.
4.Select your new technical system as the technical system for the business system.
5.Check all the components of the selected product (SAP R/3, 4.6C) and choose Next.
6.Choose a PI system as the related integration server and choose Finish.
for more Clarifiation:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/d9/f3d22f01c741bdb0e62a2f4205411c/content.htm
thanks,

Similar Messages

Unable to update this object because the following attributes associated with this object have values that may already be associated with another object in your local directory services

Getting this error from DirSync
Unable to update this object because the following attributes associated with this object have values that may already be associated with another object in your local directory services: [UserPrincipalName
[email protected];]. Correct or remove the duplicate values in your local directory. Please refer to
http://support.microsoft.com/kb/2647098 for more information on identifying objects with duplicate attribute values.
Quick eyeball and couldn't see the cause in the user account so used the script here:
http://gallery.technet.microsoft.com/office/Fix-Duplicate-User-d92215ef
And got these outputs:
PS C:\Windows\System32\WindowsPowerShell\v1.0> Export-OSCADUserPrincipalName -UserPrincipalName "[email protected]" -Path .\outputs.csv
WARNING: Cannot find objects with specified duplicate user principal name
[email protected]
Found 0 user(s) with duplicate user principal name.
Where to from here?
Richard P

Hi,
Did you talk about the Microsoft Azure Active Directory Sync tool ?
If yes, this issue occurs if one or more of the following conditions are true:
An object in the on-premises Active Directory has an SMTP address that's the same as the SMTP address of the object that's reporting the problem.
An object in the on-premises Active Directory has a mail attribute that's identical to the object that's reporting the problem.
An object already exists in your organizational account and has the same SMTP address or mail attribute as the object in the on-premises Active Directory
More detail information, please refer to:
http://support.microsoft.com/kb/2520976/en-us
[Troubleshooting] Unable to update this object because the following attributes associated with this object
http://blogs.technet.com/b/aadsyncsupport/archive/2014/05/20/troubleshooting-unable-to-update-this-object-because-the-following-attributes-associated-with-this-object.aspx
Regards.
Vivian Wang

Unable to see repository objects in directory

hi,
i am unable to see repository objects in directory(like message interface, interface mapping).
i have tried cache refresh but the issue still persists.

Check in SLD whether required software component is assigned to your techincal system and business system.
If it is not assigned to required technical and business system:
1. Assign the Software product to your technical system in SLD.
2. Add the Software component to your business System in SLD.
3. Go to Environment --> Clear SLD Cache in Integration Directoty..
Then try again.

Unable to see any Tasks in the WCB or in Telnet.

Tasks are not getting generated in WCB and also in Telnet.
All the task setups are done.
Shipping transactions form --> Status is Released to Warehouse.
But unable to see any Tasks in the WCB or in Telnet.
can any one help me.
Thanks and Regards,
KVR

Hi,
Check whether the release rule you are running has the option Auto Allocate (Inventory Tab) is YES.
If it has NO then you have to run the Move Order Pick slip program with auto allocate move orders as YES and order types as pick wave for material allocation to happen.
once material is allocated you should be able to view them in WCB atleast.
After you find them in WCB but not on telnet then check you resource and device setup.
Karthik.

I am unable to see Shopping cart in the Purchaser's Worklist

Hi All,
i am unable to see Shopping cart in the Purchaser's Worklist after Approval, the status shows "In Purchaser's Worklist".
can any one tell me what will be the problem
Reg.
Ravi

Hi
I think, the user is having authorization role problem or Do this
Also check, in the Extended search option, include the options, Bought on behalf of as checked ('X') and Include Completed Shopping carts as 'X' with Time Frame - (LAst Year) and Status = ALL
Refer to Transaction BBP_MON_SC (Monitor Shopping cart ) to check it whether it's pending in with whom and at what status.
Also, alternatively, you can refer to BBP_PD transaction, Specify the Shopping cart number there in the Object_ID field and you will get the details.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Unable to lookup System object and the alias..

Hello All,
I am implementing the Business Package for CRM.
I have created the SAP_CRM and SAP_BW systems and assigned them the same aliases as mentioned in the instructions in http://help.sap.com/saphelp_crm40/helpdata/en/11/0584016208bc4988c3791d6213b6d0/content.htm
I have tested the connections to the WAS, as well as ITS server after configuring them from the portal system administration.
However, I get the exception.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Unable to lookup System 'SAP_CRM'. Please check the system object and the alias..
The error in the log is as follows:
#1.5#00112FCBC32C005E000000A9000007EC000412303370C08B#1145898137593#com.sap.portal.sapapplication#sap.com/irj#com.sap.portal.sapapplication#user1#95##LABNW_J2E_19311950#user1#15374a50d3b411da8f1e00112fcbc32c#SAPEngine_Application_Thread[impl:3]_36##0#0#Error#1#/System/Server#Plain###ApplicationIntegratorException: com.sapportals.portal.appintegrator.ApplicationIntegratorException: Unable to lookup System &\#39;SAP_CRM&\#39;.
Please check the system object and the alias.com.sapportals.portal.appintegrator.ApplicationIntegratorException: Unable to lookup System &\#39;SAP_CRM&\#39;.
Please check the system object and the alias.
 at com.sapportals.portal.appintegrator.layer.SingleSignOnLayer.getSystemLogonMethod(SingleSignOnLayer.java:243)
 at com.sapportals.portal.appintegrator.layer.SingleSignOnLayer.processLayer(SingleSignOnLayer.java:55)
 at com.sapportals.portal.appintegrator.LayerProcessor.processActionPass(LayerProcessor.java:173)
 at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doOnPOMReady(AbstractIntegratorComponent.java:71)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:396)
 at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
 at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
 at com.sapportals.portal.prt.pom.PortalNode.processEventQueue(PortalNode.java:800)
Any hints recommendations for the same.
Thank You.
Sumit.

Hi Sumit,
System is an object in Portal Content Directory (PCD). User of portal should have permissions to access it. Looking up is a kind of access.
Please go to System Administration -> System Configuration -> System Landscape. Find your system and right-click on it, then choose 'Permissions'. There you should make sure that your portal user has permissions.
You can read about permissions here:<a href="http://help.sap.com/saphelp_nw04/helpdata/en/f6/2604e505fd11d7b84200047582c9f7/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/f6/2604e505fd11d7b84200047582c9f7/frameset.htm</a>
There is an extract probably related to your problem:
" If an iView is based on a system object defined in your system landscape (see System Landscape), you must assign end user permission for the relevant user, group, or role to the system object, as well. End user permission assigned to a system permits the iView to retrieve data from the respective back-end application through the system object at runtime."
Regards,
Sergei
Message was edited by: Sergei Dneprov

Unable to see ODS Object in BEx.

Hi all,
I am unable to see an ODS object in BEx, which is an active ODS Object with data in modelling.
Can any one show me a way out, how to find this ODS object in BEx as well.
Thanks in advance,
Regards.

Hi Robert Zovic
Thanks for your answer,
When I switced on th same..following is the eror message:
The BEx Reporting was switched on for ODS object 0RPM_DS02 ---> long text
Message no. RSDODSO157
System response
When activating ODS object 0RPM_DS02 SIDs have to be got for all characteristic values in the ODS tables, provided that these characteristic values are not already assigned any SIDs. This is required because the SIDs are used in BEx Reporting.
The activation of ODS object 0RPM_DS02 can thus take a while longer.
Procedure
If the activation of ODS object 0RPM_DS02 terminates due to timeout you have to activate the ODS object with the program RSDG_ODSO_ACTIVATE in the background.
I'm working on this, is there any other way out for the
same.
Thanks.
Regards.

Unable to see an iView in the Portal

Hi All,
I have a scenario, where in I have an iview in a page, the page can be in the workset,this workset has assigned to a role, and this role has been give to a user,now I have a user login to the portal , i am unable to see the iview in the portal, what could be the possible reason?
Regards
Chandra

If U r not getting the Role navigation structure in the portal then make sure that the "Entry point" for the role has been set to True.
If you are getting the Role structure in the portal but not getting the iView then check the iView Property "Invisible in Navigation Area" property set to false.
Next you can check for the iView Permission , if the User has permission for te iView or not.
Hope now u can get the iView in the portal
Cheers
Chinmaya
Reward for helpful answers

I have elements 12 in Windows 7 but is unable to see mp4 files in the organiser. The sound from the file is there but no image!

I have elements 12 in Windows 7 but is unable to see mp4 (Canon G16) files in the organiser. The sound from the file is there but no image!
Other file formats from Canon is no problen. So What to do??
Roger

Me again,
A friend suggested that I do a system restore.
I did a search for system restore in Windows 7 and got a very intuitive menu.
I selected an earlier system restore point and executed the restore.
After the computer restart I reloaded Firefox 5.0 and the Ask.com problem was corrected.
My friend says this approach may work about 25% of the time to fix this kind of problem. In my case it worked and I am happy.
Thanks all.
Richard Ryer

Unable to see imported RFCs in the BPM

Hi,
I want to invoke a BAPI from a BPM, but I am unable to see the BAPI request / response interfaces in the BPM.
I am trying to create Containers and Transformations in the BPM, but I am unable to select the BAPI request / response interfaces.
What do I need to configure to invoke BAPIs from the BPM ? thanks,
-Manish

Hi Manish,
you need to create three things:
1. An abstract synchronous interface with the same message types as the BAPI
2. An abstract asynchronous interface with the message type of the BAPI request
3. An abstract asynchronous interface with the message type of the BAPI response
From 2 and 3 you derive Container elements and use it for request and response of the synchronous interface.
Regards
Stefan Grube

Unable to see Subject Areas in the Manage Privileges

Unable to see Subject Areas when tried to set permissions for the Subject Areas using Manage Priviliges option under Administration.

Hi,
This is the Data Mining forum.
If your question is about OLAP, then try the OLAP forum.
OLAP
Thanks, Mark

I am unable to see a project on the i Movie player screen

I am unable to see any project (saved or in process) in the player screen of i Movie.

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

Unable to see sales organization in the t0code bp

Hi Gurus,
i am trying to upload the sales area data through the fm crmx_if_partner_save for the role crm000 (sold-to-party).the fm is creating the bp but i am unable to see it in the t-code level.
Please help.

Hi,
Check whether the release rule you are running has the option Auto Allocate (Inventory Tab) is YES.
If it has NO then you have to run the Move Order Pick slip program with auto allocate move orders as YES and order types as pick wave for material allocation to happen.
once material is allocated you should be able to view them in WCB atleast.
After you find them in WCB but not on telnet then check you resource and device setup.
Karthik.

Unable to see substituion variable in the reporting studio

Hi,
I have added substitution variable to the reporting studio the variable name I gave as var1
and value as 2009,but I am unable to see the substitution variables in my reporting studio.
What can be the reason for it?
Thanks

Hello,
you have to quote the value because it doesnt start with a letter.
Every Value which you had to put in quotes in an Calc Script or Member Formula or so, you have to quote in FR Studio too. Planning accepts the value without quotes, FR Studio doesnt.
Bye
Kevin

Unable to see any changes after the preview download

Hi Team,
I have registered as developer and downloaded the preview today. But i cant see any changes in the features. Am i missing something here ?
Regards,
Santosh

We have moved our support forum for OS Consumer Support, i.e. almost any support of the Preview for Developer release that is not related to developing an application, to the Microsoft Community website here:
http://answers.microsoft.com/en-us/winphone/forum/wp8
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

Unable to see ESR objects in the IR

Similar Messages

Maybe you are looking for