Unable to see file system on touchpad over USB from Windows 7

When I plug in my HP touchpad running 3.0.4 via USB to my PC running Windows 7 the device appears in device manager, but I don't see a new drive appear with a given drive letter under my computer.
If I look at device manager in windows, I see two webos devices. One is under disks. The other is an unknown device with a question mark next to it.
If I look at the disk from the disk management interface, the disk appears, but doesn't seem to have a drive letter nor a filesystem on it.
If I plug the touchpad into an XP box, it wants to format the drive... which loses my apps.
What did I break? Any way of fixing this?
Thanks!
-- gyre ---
Post relates to: HP TouchPad (WiFi)

Before you disconnect the cord from the PC, are you correctly choosing "Eject", or the incorrect "Safely Remove Hardware" from the tool tray?
I've heard the latter can cause confusion on a PC...
Wyrenut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Unable to see files in iTunes File Sharing

I'm using the latest version of iTunes, and have both an iPad and iPad2, both fully upto date with the latest version of IOS. Everything I now write about applies to both iPads.
Basically, I'm unable to see files that are sent to iTunes from the iPad. The ipad is connected to the PC, I select the file I want to send from the appropriate app, and then "send to iTunes". The file never appears under the app that sent if from the file sharing section of the device in iTunes. Even forcing another sync doesn't help either.
Here's the strange thing, if I unplug the iPad, then reconnect it, go back to file sharing page in iTunes, and click on the appropriate app, the files show. However, if I click onto another app in the file sharing list and back to the original one, the files have disappeared.
By way of example:
I connect my iPad to iTunes, after it automatically syncs, I select the iPad, choose the apps menu and scroll down to the file sharing window.
On my iPad, I open Pages, select a document and send it to iTunes.
Back on my PC, the file doesn't show under the Pages app in the file sharing window.
I resync the iPad, still no change.
I disconnect the iPad, reconnect and let it automatically sync again.
I navigate back to the file sharing section and click on the Pages app. Low and behold, the file is now showing.
I click onto any other app that is listed in the file sharing section, then click back to the Pages app. The file no longer shows.
It will remain like that until I unplug the ipad, and connect/sync again.
Exactly the same thing will happen regardless of which app I choose that supports file sending to iTunes.
Finally, just to confuse matters further, the reverse is also true. Adding a file to the file sharing section doesn't appear in the list, and the iPad can't see it - until I unplug and reconnect again. After that, same issues happen as already described.
Any assistance would be appreciated.

This is a bug in the Windows version of iTunes which I reported to Apple nearly a year ago (back when iTunes 10 came out), but they refuse to fix. I see the problem with my iPhone 3GS and iPad 2.
Basically file sharing stops working if you click on more than two or three apps in the file sharing list. The work around is to disconnect the iOS device and reconnect it. Then make sure to click only the app you want to transfer to/from. If the document list goes blank, disconnect and reconnect again.
It's really annoying and I wish Apple would fix it. Supposedly it was also broken for the Mac version of iTunes and was quickly fixed there, but not for Windows.

Ludelete error "Unable to unmount file systems"

Trying to delete a BE from a Solaris 10 10/08 system:
# cat /etc/release
                      Solaris 10 10/08 s10s_u6wos_07b SPARC
           Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                            Assembled 27 October 2008
# lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
sol10_1008_stage2          yes      yes    yes       no     -
sol10_1008_SAPC20090813    yes      no     no        yes    -
# ludelete -n sol10_1008_SAPC20090813
ERROR: Unable to unmount file systems for boot environment <sol10_1008_SAPC20090813>.
Unable to delete boot environment.
#There's a bunch of junk in /.alt/.tmp* and /a/:
# zfs list
NAME                                                                         USED AVAIL REFER MOUNTPOINT
rpool                                                                       65.5G 1.46G 23.5K /rpool
rpool/ROOT                                                                  45.5G 1.46G    18K /tmp/mnt
rpool/ROOT/sol10_1008_SAPC20090813                                          6.38G 1.46G 30.1G /.alt.tmp.b-LMc.mnt/
rpool/ROOT/sol10_1008_SAPC20090813/zoneds                                   6.37G 1.46G    18K /.alt.tmp.b-LMc.mnt//zoneds
rpool/ROOT/sol10_1008_SAPC20090813/zoneds/dmgrdv01-sol10_1008_SAPC20090813 19.5K 1.46G 19.5K /.alt.tmp.b-LMc.mnt//zoneds/dmgrdv01-sol10_1008_SAPC20090813
rpool/ROOT/sol10_1008_SAPC20090813/zoneds/dmgrpl01-sol10_1008_SAPC20090813 19.5K 1.46G 19.5K /.alt.tmp.b-LMc.mnt//zoneds/dmgrpl01-sol10_1008_SAPC20090813
rpool/ROOT/sol10_1008_SAPC20090813/zoneds/empdev01-sol10_1008_SAPC20090813 3.76G 1.46G 3.76G /a/zoneds/empdev01-sol10_1008_SAPC20090813
rpool/ROOT/sol10_1008_SAPC20090813/zoneds/tst01-sol10_1008_SAPC20090813     19.5K 1.46G 19.5K /.alt.tmp.b-LMc.mnt//zoneds/tst01-sol10_1008_SAPC20090813
rpool/ROOT/sol10_1008_SAPC20090813/zoneds/tst02-sol10_1008_SAPC20090813     19.5K 1.46G 19.5K /.alt.tmp.b-LMc.mnt//zoneds/tst02-sol10_1008_SAPC20090813
rpool/ROOT/sol10_1008_SAPC20090813/zoneds/tst03-sol10_1008_SAPC20090813     18.5K 1.46G 18.5K /.alt.tmp.b-LMc.mnt//zoneds/tst03-sol10_1008_SAPC20090813
rpool/ROOT/sol10_1008_SAPC20090813/zoneds/wasdv01-sol10_1008_SAPC20090813   19.5K 1.46G 19.5K /.alt.tmp.b-LMc.mnt//zoneds/wasdv01-sol10_1008_SAPC20090813
rpool/ROOT/sol10_1008_SAPC20090813/zoneds/waspl01-sol10_1008_SAPC20090813   1024M 1.46G 1024M /a/zoneds/waspl01-sol10_1008_SAPC20090813
rpool/ROOT/sol10_1008_SAPC20090813/zoneds/webdv01-sol10_1008_SAPC20090813   1.62G 1.46G 1.62G /a/zoneds/webdv01-sol10_1008_SAPC20090813
rpool/ROOT/sol10_1008_stage2                                                39.1G 1.46G 37.9G /
rpool/ROOT/sol10_1008_stage2@sol10_1008_SAPC20090813                        1.20G      - 30.1G -
rpool/dump                                                                  8.03G 1.46G 8.03G -
rpool/swap                                                                  8.00G 9.46G    16K -
rpool/zones                                                                 3.94G 1.46G    20K /rpool/zones
rpool/zones/eita                                                            3.94G 1.46G    18K /rpool/zones/eita
rpool/zones/eita/iamdv01                                                      18K 1.46G    18K /zones/eita/iamdv01
rpool/zones/eita/ldapdv01                                                   3.94G 1.46G 3.94G /zones/eita/ldapdv01
#"zoneds" does not exist, so I am guessing that is the problem. I'm wondering if it is safe for me to delete them.
Mark

Hmmm... I haven't run into this with ZFS.
For UFS, this should work:
luumount -f sol10_1008_SAPC20090813
Alternative to that, you could do a force delete of the BE (ludelete -f sol10_1008_SAPC20090813) and remove the ZFS entries manually.
I have also resorted to hand-editing the zone configuration files, but that's not exactly a recommended practice ;-)

SSAS Cube Dimension Processing Fails Reporting: File system error: A FileStore error from WriteFile occurred

Hi,
I have a SSAS Cube Database for which the processing had been stopped since the year 2012, but as the requirements have again come up, this cube needs to be processed on a daily basis again, to refresh the cube with new incoming data.
As i was testing the cube processing steps before finally re-activating the cube processing in production, i came across a weird error while doing a manual processing for a Dimension.
File system error: A FileStore error from WriteFile occurred. Physical file: \\?\D:\MSAS10.MSSQLSERVER\OLAP\Data\Citi.184.db\Dim Extended Data.0.dim\54.Extended Data.ksstore. Logical file: . . Errors in the OLAP storage engine: An error occurred
while the 'Extended Data' attribute of the 'ExtendedData' dimension from the 'Citi' database was being processed.
This error came to me while i was doing a process update for the dimension, i even tried to do a Process Full for the same dimension which did not help. I then did a Unprocess and then a Process Full, which didn't work as well.
Can anyone please help me with this issue. I am using the SQL Server 2008 where the cube is hosted and the processing used to work fine earlier, but now its failing with this error.
Thanks

This looks like the 4GB string store limit. If you can upgrade to SQL Server 2012 Analysis Services, you can change a simple setting and grow beyond that 4GB string store limit.
http://technet.microsoft.com/en-us/library/gg471589(SQL.110).aspx
If you can't upgrade, what data is in that ExtendedData attribute? If it's a meaningless surrogate key that you don't need users to see, you can use this trick to avoid the 4GB string store limit:
http://cwebbbi.wordpress.com/2012/08/10/storage-and-the-namecolumn-and-keycolumns-properties/ But if it's something the users need to see, there's not an easy way to fix it without upgrading to SSAS 2012.
http://artisconsulting.com/Blogs/GregGalloway

Unable to connect to Deskjet 3545 via Wireless Direct from Windows 8.1 laptop (Lenovo Thinkpad E530)

Hi, It's a newly bought printer. I am unable to connect to the printer via Wireless Direct from Windows 8.1 64bit laptop. I have enabled the Wireless Direct with security on the Printer. Connected to the Printer SSID from my laptop wifi. Created the new printer from Driver software. It discovers the printer with it's name,IP etc; Upon selecting the printer and click on 'Next' button on the screen, results in a 5 min search process and finally displays that it could not connect. I have tried pinging the printer and it's able to pingf the IP of the printer successfully. I have even tried disabling the Norton antivirus, but result is the same. regards,sathwik

Unable to create File System Repository manager

Hello,
I would like to create File System Repository manager to this path: I have mapped a certain Network drive "
main-uni-fs1\pictures$" to the Portal Machine and under this machine it appears as drive "N:\", inside it there is a picture folder which I would like to create the mapping to. I tried setting the "Root Directory" value to "N:\" and to "
main-uni-fs1\pictures$" but I keep receiving an error message at the Repository Component Monitor (see below).
10X,
Roy

Hello Roy,
1> Create a new path that points to the pictures directory on the system. Enter the path lik
mypc.myorg.com\pictures
Under Sys admin -> Sys Config -> KM -> Content MGT -> Global Services -> Network path
Under the user name and password, enter your username and password
username whould be entered like domainname\username
2>Then create a system in for the mypc.myorg.com server under
Sys admin -> Sys Config -> KM -> Content MGT -> Global Services -> System landscape definitions -> System -> Windows Sytem.
(Assuming u are acessing a windows sytem from a portal running on windows platform).
You need to enter system id and description . Kindly remember the system id, since it would be useful in two places while usermapping and creating the file system repository.
3>create a file system rep mgr under
Sys admin -> Sys Config -> KM -> Content MGT -> Repository Managers > File System Repository
Following properties are most important.
Name , ACL manager cache, Security manager(which you would have to set to W2kSecurity manager)
prefix(this is the folder name that you will identify your repository with) Widws landscape System (this is the sytem id of step 2) and root directory (network path of first step only in this case enter it like this //mypc.myorg.com/pictures)
4>Then under user mapping section, you will find you system (the system id of second step) , enter your name as password.
Initially when you configure your rep manager, you dont need to start ur servlet engine. If you modify any property then you need to re start ur servlet engine.
These are the steps for creating repository
If this still does not get resolved. Then kindly read the limitations of creating the file system repository manager in the link that I had posted in my earlier post.
Thanks and Regards
Pradeep Bhojak

Unable to expand file system in shared services

we have been using LCM in our EPM 11.1.2 to migrate back and forth between our development and prod systems.
It worked fine until recently. Nothing has changed in our system. Suddenly, when we tried to migrate from one system to another(prod), the file system tab in shared services doesnt show anything.(The file system in development shows all the migrated files). We have been through this process successfully before-several times.
We have verified that the file system for that id has all the migrated files. We have even tried with some other ids. Still the file system doesnt show anything.
Has anybody seen this behavior before?
Thanks,
Sujani

Hi ,
Have you looked in your LCM log:
SharedServices_LCM.log under the logs, Shared Services directory
Have you tried bouncing Shared Services? Maybe it's just hung up, or having heap size trouble.
Another thing you might try is moving some of your exported LCM folders out of the import_export directory on the server to see if possibly one of the previous exports is having trouble being enumerated.
Nick

Unable to see files or write to external SD card since 4.3 upgrade

HI. I have an external SD card plugged in to my SIII.
It's been working great for months.
A week or so ago, an upgrade was pushed down to my phone, 4.3 to be exact.
Since then I can't see files on my external SD card.
If I plug a cable into my computer and browse to my phone's external card I can see them on my PC.
I've searched around and backed up my files, unmounted, reboot, remount. Reformat the card, unmount & remount.
No change.
I've formatted the SDcard on a PC and no difference.
Is anyone else experiencing this?
The card is a SanDisk Ultra 64gb microSD card, but it really isn't card specific.
I put my older 16gb card that I used to use and it can't read any files on there either.
The phone DOES see the card and cant report free space, it just can't do anything with it since the last update.
What can I do?
Thanks,
David

After I formatted the card I can copy files via the PC & cable, but they don't show up when viewing from the phone.
If I use an app like Astro File manager (which did show the files correctly, prior to the 4.3 update), it shows the word "empty" for truly empty folders but it just shows a blank empty folder for folders that have a file that I copied in via the PC & cable.
If I try to make a folder in Astro, it looks like I did, but it doesn't show in Astro.
If I look from my PC, it shows the folder that I created on the phone via Astro.
Once again, everything was working great up until the pushed 4.3 update.
The Old card does show up fine on other phones.
I haven't tried the 64gb card on another phone yet, but the card isn't the issue.
As I copy over files to the card via the PC and cable, the phone does reflect the data used/free space correctly.
I see a similar issue someone is having on an S4, but the thread is locked:
https://community.verizonwireless.com/message/1016871
Still wondering what I can do. Can I downgrade my S3 OS? to 4.1/4.2?

Unable to create File System Repository using Network Path

Hi All,
I am trying to create a File System Repository.
I created a networkpath and windows system and used the same while creating File Repository according to the steps in help.
With out using Networkpath(i.e.,If I use IP address,I am able to create File System Repository).
But with the network path,it throws the following error as seen in Component Monitor.
<b>Startup Error: The localroot does not exist: C:\usr\sap\IGTE\j2ee\j2ee_00\cluster\server\NWP_001
My network path is NWP_001
</b>
Did any one face this problem?
Any help please........
Rgds,
Santhosh

Hi,
I am getting the same error even if I replace(\) by slashes(/).
I tried on EP6SP12 as well as EP6SP2 and got the same error on both.
The repository is searching for a folder named with
n/w path on the portal server itself(i.e, it is searching in the following folder
<b>C:\usr\sap\IGTE\j2ee\j2ee_00\cluster\server\NWP_001
My network path is NWP_001</b>),instead of searching on the remote system.
Can any one help me in solving the problem
Thanks in Advance.
Rgds,
Santhosh

Unable to see a font in Adobe Type Kit from within Adobe Muse

While I am able to install a font, Fertigo Pro from Adobe Type Kit, am unable to see the same font in Adobe Type Kit from within Adobe Muse.

Unfortunately, that is not the case. From http://help.typekit.com/customer/portal/articles/1189216-introduction-to-desktop-fonts-fro m-typekit: You are now able to sync fonts from Typekit to your desktop via Adobe Creative Cloud and use them in all your applications for web mockups, print design, word processing, and more.
Using of a font for web mockups is not the same as using it as a web font on a live website. The two uses are covered by different font licenses.
You can use a desktop synced font in Muse as a system font and export it as an image. But to use a Typekit web font in Muse is not currently supported (though you can try the Muse Insider workflow referred to in the other forum post I mentioned above).
Hope this clarifies things a bit.
Abhishek

How to restore file system of the previous backup from OSB using webtool?

Dear all,
I have some problem regarding to the file system restoration.
For example, I have backed up some files yesterday and today those files have been made change.
So tomorrow I am planning to restore the files from the yesterday backup (the original files before made changes) to other host for testing the data.
Is it possible to do that, since when i restore i can see only the latest ones and search options during restoration are not working well (as date, date range,.....) ?
Your reply to me is very important.
Thanks and regards,
Rasmey

There is no recovery partition on drives which haven't had 10.7 or 10.8 installed. You need to use a Mac OS X install DVD to restore the backup.
(82545)

What file system to use in exporting from cs3 HD

Hi just a quick thank you for the information that I have received from this forum. Being from a small community this service is well appreciated.
My question is that okay so now I want to export my project and I need to know if there is a file system I can save it to, to be able to bring it back into premier if I so choose. The work flow I use in Premier especially with 2hr plus projects, with all the layering, slo mo etc bogs the project down, when I edited sd I would export half as a movie, edited second half and render to movie and combined both files together to create the long movie. In hd I don't understand the file system I could use, I am shooting sony hd hvr z7u shooting 1080i. So what file system and should it be mpeg or h264. Does Premiere support a workable file system.
Thanks
Joan

If I were you, I would use MPEG-2. Match all the output options to that of your origional footage. I see that your camera shoots HDV, so set the bitrate to 25Mbps or higher. If you have any more questions feel free to ask.

EFS(Encrypting File System ) Folder can work for cloning Windows 7 PC?

Dear All,
I am using EFS (Encrypting File System) on a Windows 7 notebook to encrypt a folder.
I would like to clone this notebook to several other notebooks.
Will the EFS still work on the cloned PC?

Hi,
As I know, after cloning the system, the SID may be changed. So, the EFS folder unable to open.
But if you have the EFS certificate, you can still use the folder with no issue.
In theory, the EFS can work on the cloned PC, please backup the certificate first.
Back up Encrypting File System (EFS) certificate:
http://windows.microsoft.com/en-in/windows/back-up-efs-certificate#1TC=windows-7
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

How do I restore a Windows 8.1 system image if I upgraded from Windows 8?

I have a new HP Envy TouchSmart 15 Notebook PC 15-j003cl.
It came with Windows 8 which I upgraded to Windows 8.1.
I created the HP Recovery USB flash drive.
From my reading I understand that the recovery USB flash drive is Windows 8 not 8.1.
My question is:
Can I restore a Windows 8.1 System Image Backup I made on a USB hard drive using the Windows 8 recovery USB flash drive?
Or, to put it another way, what is the recommended procedure to back up an upgraded Windows 8.1 computer so, in the event of hard-drive failure, I don't have to start with Windows 8, upgraded to 8.1, re-install all my apps?
Thanks
Kirk

OK here's where I am now and a few followup questions,
Started with Windows 8.
Upgraded from Windows Store to Windows 8.1
Installed lots of apps and got everything running the way I like.
I created a full system image of my upgraded 8.1 hard drive to an external USB hard drive.
I have successfully created a recovery boot USB flash. (did not copy recovery partition) I can restart the computer from
it and navigate up to the point where it will restore my system image made after I upgraded to 8.1. (I don't want to risk
trying it for fear it will mess up my computer)
Assume my hard drive failed and I have a new blank hard drive:
My question is at this point does it matter that this was originally a windows 8 (not 8.1) computer?
Will I be able to restore the image of 8.1?
Does it matter which version of Windows I created the recovery boot USB flash on? ( I can't tell when it boots from the
recovery USB flash if it is running Windows 8 or Windows 8.1.
I wish there was a way to test this without risking losing all the work I have done to configure the computer??
Thanks,
Kirk

Can't attach file in icloud webmail using firefox from windows or mac. any ideas?

anyone else having trouble attaching file in icloud webmail using firefox or internet explorer from windows or mac. i was able to get it to work from safari on a mac, so i guess it must be a browser thing, only enabled or working in safari?

I had the same problem since last Thursday. I have tried and re-tried all of the settings suggested by the support posts but I can not get email to go out of me Outbox.

Unable to see file system on touchpad over USB from Windows 7

Similar Messages

Maybe you are looking for