Unable to see IKM Hyperion to Planning when loading metadata from File/Tabl

Hello,
I am unable to view the IKM SQL to Hyperion Planning Knowledge Module in the flow tab. I reverse engineered the KM and I see the KM in my Project(Have only 1 project). I am trying to load metadata from file to planning and selected staging area different from target. I was able to reverse engineer the planning cube successfully to ODI Models.
ODI Version: 11.1.1.6.3
Planning Version: 11.1.2.2
Any help will be appreciated.
-Kash

932916 wrote:
Hello,
I am unable to view the IKM SQL to Hyperion Planning Knowledge Module in the flow tab. I reverse engineered the KM and I see the KM in my Project(Have only 1 project). I am trying to load metadata from file to planning and selected staging area different from target. I was able to reverse engineer the planning cube successfully to ODI Models.
What is your staging area pointing to ? Make sure it is pointing to a RDBMS schema or SUNOPSIS MEMORY
ODI Version: 11.1.1.6.3
Planning Version: 11.1.2.2
Any help will be appreciated.
-Kash

Similar Messages

Unable to see the Hyperion tab in Excel 2003

Hi Hyperion gurus,
Can anybody shed light on an issue that a user encountered with Smartview? This user installed Smartview and had been using it without any problems. We just started parallel testing and he needed to use Smartview as part of the process. He is now unable to see the add-in in Excel 2003. He has no Hyperion tab and we cannot find any evidence that it has been installed. We reinstalled Smartview but even after reinstalling Smartview he is still unable to see the Hyperion tab in Excel. What is puzzling is that he does have the Hyperion tab in Word and is able to connect.
Would appreciate any help provided? Thanks.

I have seen the same exact problem at my company regarding the missing Hyperion tab in Excel (but present in MicroSoft Word). If you go into Excel, then select 'Help', then About MicroSoft Excel, then you'll see 'Disabled Items'. Scan the list for HSAddin.Dll. If this is on the list, highlight it, then select the 'Enable' button. (this is my first suggestion). I've also had to do the following in some isolated cases:
You should also try re-registering the following 3 SmartView DLL files. To do this, simply locate where these 3 files are stored on your local machine (the file names are):
HSAddin.dll
HSSpread.dll
HyperionSmarttag.dll
Usually these are stored within the following path: C:\Hyperion\Smartview\bin
To Register the files:
Open DOS (start->run->cmd) and change your path to C:\Hyperion\SmartView\bin
Type in the following, hitting enter key after each line:
regsvr32 hsaddin.dll
regsvr32 hsspread.dll
regsvr32 hyperionsmarttag.dll
You should receive a 'success message' for each file you register. Reboot your machine following this, and go back to Excel. Your menu should now be in place.
Thanks,
James Pryal

ADF Mobile - Unable to load metadat from pagdef

Dear All,
I am getting the following error when i deploy to an android emulator:
Unable to load metadata from pagedef
Can aybody suggest what should i do for the same ?
I have uninstalled app multiple times, ccleaned all and redeloyed. Still getting the issue.
Regards,
Deepak

This is my DataBindings.cpx :
<?xml version="1.0" encoding="UTF-8" ?>
<Application xmlns="http://xmlns.oracle.com/adfm/application" version="11.1.2.62.94" id="DataBindings"
SeparateXMLFiles="false" Package="mobile" ClientType="Generic">
<pageMap>
<page path="/fsSearch.amx" usageId="mobile_fsSearchPageDef"/>
</pageMap>
<pageDefinitionUsages>
<page id="mobile_fsSearchPageDef" path="mobile.pageDefs.fsSearchPageDef"/>
</pageDefinitionUsages>
<dataControlUsages>
<dc id="FlightScheduleList" path="mobile.FlightScheduleList"/>
</dataControlUsages>
</Application>
Do you see any issue in this ?
Please help.
Regards,
Deepak

Errors when writing metadata to files on Windows Server

Good day!
I have an iMac running OSX 10.9 (Maverick) and Lightroom 5.2.
My catalog is on the local iMac drive, and the images are on SMB shared drive (handled by Windows 2012 server).
I decided to do the final layout of my album using InDesign, and for that I needed to access to images using Bridge. So selected all the images (the rated once...) and issue a Metadata/Save command.
The system came back with errors on many of the files (such as Photos are read only, and unknown errors).
Retrying to save the metadata on image that was flagged with an error usually (but not always) worked.
I tried to select save the metadata for few (6) images in a time, many times it was ok, but sometimes, one or two of them failed (and retrying again usually solved the problem).
It looks to me like a timing related issue.
Any ideas?
(After spending about an hour on this, I have exported the images to my local drive...). In general I don't have similar problems with other apps.
Any ideas?
Yuval

I Yuval
I'm experiencing more or less the same behavior (see Read-only error when writing metadata to file over network (Synology DS1315+ using AFP) ). For me however, the problem is more pronounced if I use the AFP protocol and is better (I think as you described) if I use SMB (all done on a Synology DS1315+). With SMB it most often works but in very rare cases I also get the "read only" message!
Do you have solution to this? Or are you stuck as I am?
Cheers, Chris

Error when Writing Metadata to Files in Bridge (Mac) but not in Bridge (PC)

We get an error when writing metadata to files in Bridge (Mac) but not in Bridge (PC). In the same drive and folder, the PC can successfully write a keyword to a file on the PC, where the Mac returns an error. I have researched this at the Adobe Knowledgebase, but their answer seemed to indicate it was a global issue, and we don't see that behavior on the PC.
The client is a Mac of course, and the server volume is a Windows share volume. The Mac is bound to AD, and the domain\username and username formats have both been tried when logging in, but you receive the error in both.
Any help would be appreciated.
Thanks!
Rich Oliver

Hi, I'm having the same problem using FreeNAS (which uses Samba and Netatalk in the backend), but I tried with both AFP and SMB on Mavericks and Yosemite, I still have the same issue. I think it might be a timing issue with how lightroom interact with a slower write delay using network shares. I suggest you also chime into this thread: Lightroom 5 can't write metadata to DNG files I really hope this is resolved as this is impacting my productivity as I moved my workflow to my Macbook with a shared NAS.

Satellite L500-19x crashes when loading software from dvd

Satellite L500-19x crashes when loading software from dvd. This is photoshop elements 9. Other software generally loads ok, but not always.
Any ideas?

Hi shownomercer,
Have you tried the Photoshop disk in another computer to check if the installation disk is ok or not?
What happens exactly when the computer crashes? Bluescreen?

Loading Metadata from ODI to Hyperion Planning Custom Dimension

Customer want to load a metadata from ODI to Hyperion planning customer dimension using flat files(.txt files).
Is it possible to load the metadata into custom dimension? If this is possible, do we need any other KM for planning except RKM Hyperion Planning?
Because when i try to map the dimension from source to taget the connection is blanck. Getting "Used by target columns none".
Please refer the image
http://1.bp.blogspot.com/_Z0lKn46L41I/TJuZcsQxIjI/AAAAAAAAA90/TTv79fbQ9ks/s1600/ODIIssue.JPG
Thanks
Vikram

Yes you can load to custom dimensions just like the other dimensions, the custom dimensions should be reversed into the model.
You need to use the IKM SQL to Hyperion Planning, make sure you set the staging area different than the target.
If you want to see how to load metadata to planning, have a read of :- http://john-goodwin.blogspot.com/2008/10/odi-series-part-5-sql-to-planning.html
Cheers
John
http://john-goodwin.blogspot.com/

ODI Error when Loading data from a .csv file to Planning

Hello,
I am trying to load data from a csv file to planning using ODI 10.1.3.6 and I am facing this particular error. I am using staging area as Sunopsis memory engine.
7000 : null : java.sql.SQLException: Invalid COL ALIAS "DEFAULT C12_ALIAS__DEFAULT" for column "ALIAS:"
java.sql.SQLException: Invalid COL ALIAS "DEFAULT C12_ALIAS__DEFAULT" for column "ALIAS:"
     at com.sunopsis.jdbc.driver.file.bb.b(bb.java)
     at com.sunopsis.jdbc.driver.file.bb.a(bb.java)
     at com.sunopsis.jdbc.driver.file.w.b(w.java)
     at com.sunopsis.jdbc.driver.file.w.executeQuery(w.java)
     at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.g.A(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Code from Operator:
select     Account     C1_ACCOUNT,
     Parent     C2_PARENT,
     Alias: Default     C12_ALIAS__DEFAULT,
     Data Storage     C3_DATA_STORAGE,
     Two Pass Calculation     C9_TWO_PASS_CALCULATION,
     Account Type     C6_ACCOUNT_TYPE,
     Time Balance     C14_TIME_BALANCE,
     Data Type     C5_DATA_TYPE,
     Variance Reporting     C10_VARIANCE_REPORTING,
     Source Plan Type     C13_SOURCE_PLAN_TYPE,
     Plan Type (FinStmt)     C7_PLAN_TYPE__FINSTMT_,
     Aggregation (FinStmt)     C8_AGGREGATION__FINSTMT_,
     Plan Type (WFP)     C15_PLAN_TYPE__WFP_,
     Aggregation (WFP)     C4_AGGREGATION__WFP_,
     Formula     C11_FORMULA
from      TABLE
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=Account.csvSNP$CRLOAD_FILE=Y:/1 Metadata/Account//Account.csvSNP$CRFILE_FORMAT=DSNP$CRFILE_SEP_FIELD=2CSNP$CRFILE_SEP_LINE=0D0ASNP$CRFILE_FIRST_ROW=1SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=AccountSNP$CRTYPE_NAME=STRINGSNP$CRORDER=1SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=ParentSNP$CRTYPE_NAME=STRINGSNP$CRORDER=2SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Alias: DefaultSNP$CRTYPE_NAME=STRINGSNP$CRORDER=3SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Data StorageSNP$CRTYPE_NAME=STRINGSNP$CRORDER=4SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Two Pass CalculationSNP$CRTYPE_NAME=STRINGSNP$CRORDER=5SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Account TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=6SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Time BalanceSNP$CRTYPE_NAME=STRINGSNP$CRORDER=7SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Data TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=8SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Variance ReportingSNP$CRTYPE_NAME=STRINGSNP$CRORDER=9SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Source Plan TypeSNP$CRTYPE_NAME=STRINGSNP$CRORDER=10SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Plan Type (FinStmt)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=11SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Aggregation (FinStmt)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=12SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Plan Type (WFP)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=13SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=Aggregation (WFP)SNP$CRTYPE_NAME=STRINGSNP$CRORDER=14SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=FormulaSNP$CRTYPE_NAME=STRINGSNP$CRORDER=15SNP$CRLENGTH=150SNP$CRPRECISION=150SNP$CR$$SNPS_END_KEY*/
insert into "C$_0Account"
     C1_ACCOUNT,
     C2_PARENT,
     C12_ALIAS__DEFAULT,
     C3_DATA_STORAGE,
     C9_TWO_PASS_CALCULATION,
     C6_ACCOUNT_TYPE,
     C14_TIME_BALANCE,
     C5_DATA_TYPE,
     C10_VARIANCE_REPORTING,
     C13_SOURCE_PLAN_TYPE,
     C7_PLAN_TYPE__FINSTMT_,
     C8_AGGREGATION__FINSTMT_,
     C15_PLAN_TYPE__WFP_,
     C4_AGGREGATION__WFP_,
     C11_FORMULA
values
     :C1_ACCOUNT,
     :C2_PARENT,
     :C12_ALIAS__DEFAULT,
     :C3_DATA_STORAGE,
     :C9_TWO_PASS_CALCULATION,
     :C6_ACCOUNT_TYPE,
     :C14_TIME_BALANCE,
     :C5_DATA_TYPE,
     :C10_VARIANCE_REPORTING,
     :C13_SOURCE_PLAN_TYPE,
     :C7_PLAN_TYPE__FINSTMT_,
     :C8_AGGREGATION__FINSTMT_,
     :C15_PLAN_TYPE__WFP_,
     :C4_AGGREGATION__WFP_,
     :C11_FORMULA
Thanks in advance!

Right-clicking "data" on the model tab can you see the data?
In your code there's written:
P$CRLOAD_FILE=Y:/1 Metadata/Account//Account.csv
Is it right the double slash before the file name?

Alias when loading metadata into Planning

Hi all,
We are trying to load metadata into Planning 11.1.2 using the outline load utility. We have the dimension name, parent, data storage, and alias.
We get this error when doing the dry run(with /N):
Unrecognized Column header value: Alias
Does this mean we cannot load aliases using the outline load utility? Unfortunately, all the examples in the hp-admin document only talks about loading data. Where in the 'cmd' do we specify that we are loading metadata(and not data itself)?
Thanks,
Sujani

If you are loading to the default alias table the header should be Alias: Default
Cheers
John
http://john-goodwin.blogspot.com/

Error when loading metadata into Custom Dimension(Planning)

Hi all,
We are using text files to load metadata into Hyperion Planning. This works fine for standard dimensions. But it doesn't seem to work well for custom dimensions.
I have reversed the model for the custom dimension, and also set the staging area as different from target.
Error:
com.hyperion.planning.InvalidMemberException: The member <membername> does not exist or you do not have access to it.
How does ODI realize a custom dimension load(as opposed to a standard dimension load)?
Thanks.

Hi,
Please try this
1. Go to Designer and select the Interface
2. Go to Flow tab
3. Select your target
4. Go to target properties windows
5. Now you can find option called "LOAD_ORDER_BY_INPUT" and "SORT_PARENT_CHILE"
6. Please select the different values "YES" or "NO" and try to load the values.
Thanks and Regards,
Vikram.

Loading metadata from Essbase to Planning.

Hi,
I want to know what are the methods to load metadata into planning from essbase cube. I tried outline extractor to make a csv file, then I've used ODI to reverse the file and create a datasource. Then I reversed the planning application, created the interface and mapped the dimensions. I have more dimensions in planning target than the file datasource and when I execute the interface I always having some problem.
Do i need to create a sql table from the csv file and then reversed and map it to planning? Is there an easy way I can load the members without using ODI?
Thanks in advance,
-Hussain

Hi John,
I have tried the essbase to planning series. There were no errors in the operator but I dont see any members in planning after database refresh. I checked the log file and it says:
2010-06-01 08:56:22,494 INFO [DwgCmdExecutionThread]: Oracle Data Integrator Adapter for Hyperion Planning - Release 9.3.1.1
2010-06-01 08:56:22,494 INFO [DwgCmdExecutionThread]: Connecting to planning application [PLAN1] on [bms-pc]:[11333] using username [admin].
2010-06-01 08:56:22,644 INFO [DwgCmdExecutionThread]: Successfully connected to the planning application.
2010-06-01 08:56:22,654 INFO [DwgCmdExecutionThread]: The load options for the planning load are
     Dimension Name: Account Sort Parent Child : true
     Load Order By Input : false
     Refresh Database : false
2010-06-01 08:56:22,694 INFO [DwgCmdExecutionThread]: Begining the load process.
2010-06-01 08:56:22,704 DEBUG [DwgCmdExecutionThread]: **Number of columns in the source result set does not match the number of planning target columns.**
2010-06-01 08:56:22,714 INFO [DwgCmdExecutionThread]: Load type is [Load dimension member].
2010-06-01 08:56:22,714 INFO [DwgCmdExecutionThread]: Load process completed.
The number of columns in the source result set does not match the number of target colums. I have more columns in planning than temp table.
Thanks,
Hussain

Loading Metadata from planning to oracle table

Hi
I am trying to load one dimension metadata from planning to oracle table.we are on 10.1.3
i selected LKM SQL to SQL to load from source to staging area and IKM SQL to SQL append to load from staging to Target.
I got the below error
0 : null : java.sql.SQLException: Driver must be specified
java.sql.SQLException: Driver must be specified
     at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.t(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java)
     at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Please suggest..
Thanks,

Hi John
Thank you for the response
i am trying to load accounts back to oracle table.
My plan is to load existing accounts in planning to a oracle table i.e PLANACNT,so when i load new accounts from oracle to planning through ODI , i can say in the source filter that load Table.column not in (select accounts from PLANACNT).
Please suggest if there is any better method for this...my plan is to load new accounts created in oracle to planning by comparing the accounts in planning.
Thanks,

Error when loading a flat file

Hello,
I am trying to load a flat file into our BW for the first time. I keep getting the error:
Error 1 when loading external data
Message no. RSAR234
I have search SDN and looked at the OSS notes and have tried several suggestions, but I still cannot get the file to load. We are currently on version 3.5.
My transfer structure and flat file do match.
My transfer structure for IO_MAT_ATTR has a transfer method of PSA and is laid out as follows:
IO_MAT Material Number IO_MAT
IO_MATNM Material Name IO_MATNM
IO_MAT is: CHAR 15
IO_MATNM is: CHAR 30
My flat file is saved as a CSV and is as follows:
MATONE,TEA
MATTWO,COFFEE
My file is saved on my local PC and is not open when I try to load it. When I attempt to preview the file in my infopackage, I get the same error there as well.
Any suggestions would be greatly appreciated.
Thanks
Charla

Hi Charla,
Error 1 means that the system is unable to access the file. Make sure that the path is correct and also check if the data separator is correctly defined in the "external tab" of the infopackage.
I guess the settings in the "external tab" of the infopackage have some issues.
Bye
Dinesh

Numbering nodes when loading hierarchy from a flat file.

Hi All,
I want to load a hierarchy from a flat file. When we number the nodes, do they have to be in a sequence or can I give them any number I want? I want to make the GL account number as the node number since it makes it easy to generate the node number that way. The way I see it, the important thing is the parent node number; so this approach should be fine. Please correct me if I am wrong.
Thanks,
Uday

Hi Uday,
   You need to have a running sequence numbers for Node Id field in the flat file. The file structure is as
NODEID IOBJNM      NODENAME TLEVEL LINK PARENTID
00000001 0GLACC     GL233344             00000001
00000002 0GLACC     GL435556             00000001
00000003 0GLACC     GL545666             00000001
00000004 0costcenter cc433232            00000002
00000005 0costcenter cc433233            00000002
00000006 0costcenter CC555551            00000003
The Parentid will calculated by the system automatically.
when you prepare you file csv please ensure that you have 8 characters for the Node ID " 00000003" other wise you will get error.
And if you want to add GL Account number to your hierarchy then you need to add GL A/c Number as external characteristics in hierarchy and add it to your flat file .
Hope it helps.
Cheers,
Balaji

Adobe locks when loading pdf from sharepoint site

We have sharepoint 2010 in our environment. most of our users have adobe reader x. Some have acrobat standard X as well. I personally have Adobe Reader XI. Some of our users see this issue
Intermittently where when they are on the sharepoint site and they click on a pdf and say open as read only, if the user has adobe reader default to display in browser what happens is sometimes (not always) the page will just be blank and act like it is loading. This can take up to 8 minutes. Also, if the user has it open with the software and selects edit, the document takes just as long. I was wondering why the process of opening pdfs can be so slow sometimes. Any help is appreciated

Hi MrSarcastic,
Does this happen when the end users are trying to view the same pdf simultaneously?

Unable to see IKM Hyperion to Planning when loading metadata from File/Tabl

Similar Messages

Maybe you are looking for