Unable to see local (LAN)_share drive and pc on server 2012

Hello,
we have windows server 2012 and almost everything is working well.
we have installed AD and domain controllers but we do not use domain controllers. we use mostly for RDP connection.
What we are trying to do is that other users on the same network can see the share folder setup on windows 2012 but no sucess
they see all other network devices but not windows 2012.... they even see our old 2003 server.
I am banging my head for almost 1 week to fix this issue.
and also, the w2012 server does not see any others local share device
the firewall is disable and sharing is on for pubic on w2012.
is there a gpo that is blocking it or something else
the fact that is not is on the same workgroup (but 2003 is on different workgroup and other people can see the see that server )
any guide or indices because i am out of idea and i am nearly to throw my server because of that :(
Thank you

Sorry for my English and for misunderstanding.
We have 2 servers only : one 2003 and other 2012
2003 is running but rarely used.
2012 is a new server : AD, RDP Licensing Server and file share server are on the same OS (same machine)
You also have another server (2) that's running windows 2003 and is not joined to the domain (workgroup only).
No, it is configured as domain too but not same as 2012.
Users are bringing in their own devices, plugging it into a LAN network (that's on the same subnet as the servers) and are not able to see the 2012R2 file server but they can see and connect to 2003 server.
Correct
Thank you

Similar Messages

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unable to see local variable values when debugging java

Hi,
I am using JDev 10.1.2 with java version 1.4.2_04.
I have been using JDev to debug my java programs. But suddenly from this morning I am unable to see local variable values. I am able to see class and instance variables. This has happened to me before and I had restarted my machine couple of time, to get this sorted. But this time, nothing helps. Going thru the forum I found out that Include Debug information (Project Properties -> Compiler Option) need to be turned ON. It is already turned ON for me.
I would greatly appreciate if you could let me know how to crack this problem.
Thanks in advance.

No. The local variables 'used' to show up during debugging. But erratically it doesn't show up local variable values. I had to restart my machine couple of times whenever this happens, inorder to see the local variable values. But this time even restarting doesn't help.
Is there any preference setup that need to be turned on/off to see local variables?
Also I can't step into a static method now. Any idea why this happens?

Configuration of Cisco WLC 2504 with Local LAN static IP and DHCP

I want to configure Cisco WLC 2504 with Local LAN static IP and WLC 2504 with DHCP so that APs can be connect with controller.
Currently i am using WLC 2504 with DHCP so can anyone suggest how to do that..

Hi Sandeep
The info is correct, if we're using code below 7.3.101.0.
This issue is fixed via the below bug id.
CSCto01390 Unable to ping AP's directly connected to a 2500 controller
check the fix that is updated on 7.4, 7.5 RNE.
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn75.html
Note
Directly connected APs are supported only in Local mode.
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps11630/data_sheet_c78-645111.html
For quick and easy deployment Access Points can be connected directly to 2504 Wireless LAN Controller via two PoE (Power over Ethernet) ports
Thanks
Saravanan

Unable to edit the "Default Domain Controllers Policy" from a Server 2012 machine

I am unable to edit the "Default Domain Controllers Policy" from a Server 2012 machine. The error message i recieve is:
"Failed to open the group policy object. You might not have the appropriate rights. Details: The volume for a file has been externally altered so that the open file is no longer valid."
The domain controllers are running Windows 2012 R2 upgraded from Windows 2008 R2, the domain functional level is Server 2012.
I am able to edit the policy from both a Windows 7 and Server 2008 R2 machine.
The following post is identical however the fix for them does not work for me:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/2d968a05-2cff-4dd0-9c5d-dd810d1fa66f/cant-edit-default-domain-controllers-policy-on-windows-8-or-server-2012
Any ideas?

MuhammadUmar
Yes, the Unique ID is available on 2012 server
Lany Zhang
This only affects the default domain controllers policy object
Another user added to amins and tested has no effect
It is the same on another server
DCDiag passes all tests
Thanks for all your help so far

I can not install Waik and mdt on server 2012 so that i can deploy windows 7 please may you help me?

i can not install Waik and mdt on server 2012 so that i can deploy windows 7 on target machine, i have downloaded mdt Waik i got error saying you must install frame 2.0 which needs also adk windows 8. i am using hyper machine.
thank you

Hi Warsame12,
It is worth mentioning that don’t use IPV6 PXE, Windows 7 doesn’t support WDS 2012 deployment over IPv6 PXE. If IPv6 PXE boot is enabled and a
Windows 7 installation is selected, a blank screen will appear and Setup will not run.
The related KB:
Windows 7 client deployment over IPv6 PXE network boot does not work.
http://support.microsoft.com/kb/2803741
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to see my external hard drive

Hi
I've been sorting out my external hard drive and deleting numerous files. Suddenly a few small windows popped up showing a progress bar.
I am now unable to view the files from the External Hard Drive. I have tried rebooting the system a few times and I managed to see the files using Spotlight. But still,, no files shown on the drive. The Trash also shows "Bin Full" but it is empty. Any ideas? Please

Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

Unable to resolve local lan hostnames

As a fairly recent Mac convert, one of life's little niggles is the seeming inability of Tiger (10.4.8) to resolve the names of WinXp PCs on the local LAN. I can browse to them fine, set up shares to them, use smbclient to them, but can't ping them or use their names in things like VNC or RDC.
I know I can put names in the etc/hosts file, but that dictates using static IP addresses, which I'd rather not do. I've seen many other posts regarding this problem, but no obvious solutions. Anyone got one?
Thanks!

Hi Praveen,
i am guessing that you have a supernet on the LAN. I checked the config and saw the following;
Host_Name=MagnaQuestGF
Device_Name=MagnaQuestGF
Ipv4_address=172.16.8.4
Ipv4_subnet_mask=255.255.248.0
IPv4_default_gateway=172.16.9.1
IPv4_Primary_DNS=172.16.9.1
would it be possbible to put up a simple, even 'windows paint' diagram of the network setup, IP addresses and masks.
I am guessing that the PC hosts are in one network and the wireless clients might be in another network, hence they can't 'talk' to each other.
Can you also mention the model of brand and model of the router you are using ?
it would be interesting to also see the network mask given by DHCP to the PC hosts on the LAN.
Sorry for this extra hassle, but adding a picture can be most descriptive.
regards dave

Unable to see 'Result' option in MTM test plan in VS 2012

Hello,
I am unable to see 'Result' Tab in the MTM Test plan view of MTM in VS 2012.
It only displays two options - 'Contents' and 'Properties'
How can I get to view this option? Please help.
Thanks,
DR

Hi DR,
What’s the detail version of your TFS and VS?
I think you may connect to TFS 2010, if that is the case, please connect to TFS 2012 and check the result.
There is a similar thread:
# MTM 2012 RC - Test Results not displayed in Test Plan Tab - Visual Studio 2012 RC Ultimate
https://social.msdn.microsoft.com/Forums/en-US/b737b083-0c0d-4e01-8d1b-96c8a4b357ba/mtm-2012-rc-test-results-not-displayed-in-test-plan-tab-visual-studio-2012-rc-ultimate?forum=vsmantest
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Network Drives Losing Connection from Server 2012 to Windows 7 64bit Machines

I have about 20 users at my facility and recently upgraded our server from one running server 2003 to one running server 2012. Since that occurred, I have had numerous issues that I did not encounter on the old server.
Lately, users have been losing connection to the shared network drives randomly and constantly. The drives will come back on-line on their own but it could be 2 minutes or 30 minutes before they do and when users are in the middle of working on a document
from the network, they are unable to save until the drive comes back. Manually disconnecting and re-mapping them works sometimes but then the problem will re-occur. I have tried re-doing the shares and security settings and run a couple of supposed hotfixes
on the client side and the server side to no avail.
Now our regional office is suggesting that I re-connect the old server and then rebuild the new one with server 2008 r2, something I would like to avoid if possible.
I feel like this is a simple setting that I am missing, no conditions have changed except for the new server.
The server is a Intel Xeon CPU E5-2609 2.40GHz with Server 2012 64 bit on it. All computers (except on on 32 bit) are running Windows 7 Enterprise edition 64 bit.
Please help.

I made this change to the registry on the server and am waiting to see if I have any more drops.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters
Value:
autodisconnect
Data
type : REG_DWORD
Value:
ffff (Hex)
There was a client side change suggested but I am missing that value for the client side change and others in the organization who don't have it are not experiencing this problem.

Unable to assign Wyse E02 Zero Client in Microsoft Multipoint Server 2012

Hi
I am implementing and lab classroom for 20 client to be connected on 2 HP Z230 workstation with Core i7, 16 GB RAM, 1 TB HDD. It will be 10 clients on each workstation.
Everything is connected to a HP switch.
I have sucesfull installed the Muitipoint Server 2012 and it is fully updated with latest Microsoft updates.
I have also installed the Wyse E02 driver on the server so that I can view the station on Multipoint manager.
On the "Network stations" tab, I checked the box from the specific client and click on "Assign to this server". While processing I get the following error:
Client Name: Network Zero Client
IP: x.x.x.x
MAC: xx:xx:xx:xx:xx:xx
The network is busy. Please try again later.
Thanks in advance for the support helping me to solve this issue.
Regards.
Muhammad A. Ismail

So, my Wyse E02 eventually showed up in Multipoint Manager and I was able to assign it to the sever but it appears to constantly connect and disconnect. Most of the time now the client just shows the black screen stating "Waiting for assigned host.
Ensure the assigned PC is running Windows Multipoint Server in station mode." Then I will see it disconnect and the screen will go to sleep and then will come back a few seconds later when MP Manager shows it reconnect.
My Hyper-V server (which Multipoint Server is running on as a guest VM) is in the datacenter and my thin client is in my office for testing purposes. I have them in the same vlan. Is this not a supported configuration? For a quick
test I setup the Multipoint Server trial on a standalone OptiPlex and connected the Wyse terminal to the same 5 port Linksys switch and everything worked fine.

Print Spooler start and stop on server 2012 R2

Dear ,
I have server 2012 R2 and we are facing some issue with print spooler start and imediate stop working .
i couldn't get print.
please help me.
my Email id Is : [email protected]

Hi Sagar.Wagh,
Any update? Did you follow above suggestions and troubleshoot?
Just additional. Please open Services panel and navigate to Printer Spooler service, then check if you can restart it manually. If get error messages, please let us know.
Meanwhile, in Properties of Printer Spooler service, please check which account this service log on as. Is it Local System account? In Dependencies tab, please also check
if the depended system components are OK.
By the way, please perform
a clean boot and check if Printer Spooler service ran as normal.
Hope this helps.
Best regards,
Justin Gu

Loss of network connectivity at random times to guests and now hosts Server 2012 R2 Hyper-v on Dell R620...Guests virtual disks reside on a NAS.

We have set up 2 Hyper-v environments (Server 2012 R2 fully updated) on Dell R620's. The guest machines are configured do that they reside on a NAS (also a Dell R620 with server 2012). We are having an issue on both the environments where the guests will
lose network connectivity. The servers ran well for about 4 weeks and recently the guests started having issues and we have even had to reboot the host due to network connectivity problems.
We have 4 virtual switches set up. 1 connected to its own NIC. 1 for management and the 3 others for guests.
The 3 for guests are not configured to allow host OS sharing.
We do not have IP addresses on the NICS for the guests. Only on the management port. (all 1 GB NICS)
We have updated the firmware and drivers for the standard Broadcom Netxtreme cards.
We do not have Jumbo frames enabled because of some issues with switching compatability.
I've seen articles recommending to turn off TCP offloading and to disable virtual machine queues. Is this best practice?
Any thoughts of where I might look to help diagnose this issue?

Hi ,
"1 connected to its own NIC. 1 for management and the 3 others for guests."
Also you mentioned that : " is only hosting these 24 VMs ".
First please try to disable the RSS in the property of the NICs for guests .
Then run powershell " Get-NetAdapterVMQ " to check the parameter "NumberOfReceiveQueues" (NumberOfReceiveQueues – The number of queues that the NIC has available to use and assign to VMs,
the host and a default queue) .
If I understand correctly ,when you enable VMQ the number of connected VMs on that NIC should not be more than the value of "NumberOfReceiveQueues" -2 .
For details please refer to following link:
http://blogs.technet.com/b/networking/archive/2013/09/10/vmq-deep-dive-1-of-3.aspx
Hope this helps
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Essbase and Planning on server 2012

Has anyone attempt to build a sEssbase planning and HFM sandbox using the new server 2012
Please advise

It is not supported yet so why bother :)
Cheers
John
http://john-goodwin.blogspot.com/

Can we install Exchange server 2003, 2007 and 2010 on Server 2012 R2 ?

Sir,
I want to know whether Exchange server 2003, 2007 and 2010 can be installed on Server 2012 R2 or not.
Thanks in advance.

You can only install Exchange 2013 SP1 on Server 2012 R2
As far as I know Exchange 2010 SP3 can't be installed on R2 . The other Exchange Servers are too old

Unable to see local (LAN)_share drive and pc on server 2012

Similar Messages

Maybe you are looking for