Unable to see my applications in the EAS console

Hello! :)
I am stuck with not being able to see any of my applications in EAS Console. I created one EPMA and one classic application and I created Essbase cubes for both of them. I have also connected successfully to my Essbase server in the EAS Console. However when I click the + sign near the Applications node under my Essbase server which is under Essbase Servers node in the Enterprise View of the EAS Console, that + sign simply disappears and no applications appear. I would be very grateful for any hints on what is wrong in my situation! Many thanks in advance!

Hello, John!
I am very glad to hear from you! :) Thanks so much!
I am on version 11.1.1.3. By creating Essbase cubes I mean having gone to Administration>Manage Database, checking Refresh Database Options>Database and clicking Create in both of my applications.
I have looked in hyperionhome\products\essbaseServer\app\ on my server machine and I saw both folders named after my applications. When I expand Essbase Server, I get the message in the status pane below that Connect is succeeded. But...! Your reply prompted me to try to log into the EAS Console and expand the Essbase Server under admin and admin sees all the applications! Now I wonder what might be wrong with my user's permissions or roles because I had granted him all administrative roles in HSS!

Similar Messages

  • Unable to see planning application and dimension menus under navigate tab

    Dears
    Unable to see planning application and dimension menus under navigate tab in EPM 11.1.1.1 workspace.
    Is there any configuration lost?
    All EPM service have already started.
    Thx
    Hector

    I also don't see the menu under "Consolidation" or "Planning" applications. I can naviaget to these applications from Navigate -> Application ->Consolidation or Planning and I see a box with up arrow and down arrow. If I keep my cursor between these two boxes, or the boundary, sometime I could start my applications in these two modules. I checked context.properties in \Hyperion\home\deployment\Tomcat5\workspace\webapps\workspace\conf folder.
    #Appended properties
    #Sat Jan 17 14:14:43 EST 2009
    Reports=Y
    HFM=Y
    HPSU=Y
    HP=Y
    HPS=Y
    Analyzer=Y
    BPMA=Y
    ChangeManagement=Y
    Subcontext.properties file is as follows:
    Analyzer=WebAnalysis
    Reports=hr
    HMB=metrics
    HPS=HPSWebReports
    HFM=hfm
    HP=HyperionPlanning
    BPMA=awb
    HFM-version=9.3.1
    HP-version=9.3.1
    HPS-version=9.3.1
    HMB-version=9.3.1
    BPMA-version=9.3.1
    # Parameters for all contexts
    #KeepAliveInterval=10
    #SessionTimeout=30
    #logon=bpm.logon
    #startup=cds.mode
    I also removed # character in the last four lines but I cannot see my aplications under "Consolidation" or "Planning.
    This is in Hyperion 9.3.1 environment all my websites are working. Workspace, Shared Services etc. I checked all my servies and they are working ok.
    http://lewisxphub:19000/workspace/index.jsp
    Any Ideas?
    Thanks
    Jay
    Edited by: Keerthi on Jan 29, 2009 4:31 AM

  • Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?

    Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?
    I've installed three times with no luck. I downloaded the Creative Cloud Packager off the licensing site: https://licensing.adobe.com. I unpacked and choose my applications. The install seemed to be successful, but I don't so any of the applications anywhere.

    Hi,
    Creating package doesn't mean it will install the product,
    You will need to install the package now. Please follow the instructions mentioned in the below articles
    Creative Cloud Help | Creating or editing packages
    Creative Cloud Help | Deploying packages
    Please let me know if it doesn't help.
    Regards,
    Devendra

  • Unable to see any Tasks in the WCB or in Telnet.

    Tasks are not getting generated in WCB and also in Telnet.
    All the task setups are done.
    Shipping transactions form --> Status is Released to Warehouse.
    But unable to see any Tasks in the WCB or in Telnet.
    can any one help me.
    Thanks and Regards,
    KVR

    Hi,
    Check whether the release rule you are running has the option Auto Allocate (Inventory Tab) is YES.
    If it has NO then you have to run the Move Order Pick slip program with auto allocate move orders as YES and order types as pick wave for material allocation to happen.
    once material is allocated you should be able to view them in WCB atleast.
    After you find them in WCB but not on telnet then check you resource and device setup.
    Karthik.

  • I am unable to see Shopping cart  in the Purchaser's Worklist

    Hi All,
    i am unable to see Shopping cart in the Purchaser's Worklist after Approval, the status shows "In Purchaser's Worklist".
    can any one tell me what will be the problem
    Reg.
    Ravi

    Hi
    I think, the user is having authorization role problem or Do this
    <u>Also check, in the Extended search option, include the options, Bought on behalf of as checked ('X')  and Include Completed Shopping carts as 'X' with Time Frame - (LAst Year) and Status = ALL</u>
    <b>Refer to Transaction BBP_MON_SC (Monitor Shopping cart ) to check it whether it's pending in with whom and at what status.</b>
    <i>Also, alternatively, you can refer to BBP_PD transaction, Specify the Shopping cart number there in the Object_ID field and you will get the details.</i>
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • Can you reload web application from the Weblogic console?

              Good day, eh!
              Can you reload all your jsp/servlet classes of your
              web application from the Weblogic console?
              A one big button labeled 'Reload application' would be very
              good property in Weblogic
              Thanks for Your answers
              - hoser
              

    Hi,
              I agree it is a much needed feature. Suppose I just change an init
              param of one application in the web.xml, I don't want to take down the
              15 other webapps running on my server just to be able to have that web
              app restart and re-read is configuration. Of course, I could program
              some servlet that allows changing application attributes and to enable
              restarting, but really this a)does not cover all the cases (i.e. addind
              an EBJ reference binding to web.xml) b) should be provided by the app
              server, not programmed by every little programmer again & again.
              Mathieu
              Jeff Nowakowski wrote:
              >
              > The URL you give refers to redeploying EJBs, not web applications. Being
              > able to redeploy a web application would be a very convenient feature.
              >
              > -Jeff
              >
              > Gene Chuang <[email protected]> wrote in message news:[email protected]...
              > > Button is already there!
              > >
              > > http://www.weblogic.com/docs51/techdeploy/hotdeploy.html#consoledeployejb
              > >
              > > Gene
              > >
              > > "hoser" <[email protected]> wrote in message
              > > news:[email protected]...
              > > >
              > > > Good day, eh!
              > > >
              > > > Can you reload all your jsp/servlet classes of your
              > > > web application from the Weblogic console?
              > > >
              > > > A one big button labeled 'Reload application' would be very
              > > > good property in Weblogic
              > > >
              > > > Thanks for Your answers
              > > >
              > > > - hoser
              > >
              > >
              

  • I am unable to see a project on the i Movie player screen

    I am unable to see any project (saved or in process) in the player screen of i Movie.

    Leslie Tanaka
    Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
    Let us go back over that Adobe document regarding troubleshooting damaged projects.
    3. Delete the Application Preferences
    Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
    7. Test to see if individual media files are causing the problem.
    That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
    I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
    I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
    Please review and consider.
    Thank you.
    ATR

  • Unable to see an iView in the Portal

    Hi All,
    I have a scenario, where in I have an iview in a page, the page can be in the workset,this workset has assigned to a role, and this role has been give to a user,now I have a user login to the portal , i am unable to see the iview in the portal, what could be the possible reason?
    Regards
    Chandra

    If U r not getting the Role navigation structure in the portal then make sure that the "Entry point" for the role has been set to True.
    If you are getting the Role structure in the portal but not getting the iView then check the iView Property "Invisible in Navigation Area" property set to false.
    Next you can check for the iView Permission , if the User has permission for te iView or not.
    Hope now u can get the iView in the portal
    Cheers
    Chinmaya
    Reward for helpful answers

  • I have elements 12 in Windows 7 but is unable to see mp4 files in the organiser. The sound from the file is there but no image!

    I have elements 12 in Windows 7 but is unable to see mp4 (Canon G16) files in the organiser. The sound from the file is there but no image!
    Other file formats from Canon is no problen. So What to do??
    Roger

    Me again,
    A friend suggested that I do a system restore.
    I did a search for system restore in Windows 7 and got a very intuitive menu.
    I selected an earlier system restore point and executed the restore.
    After the computer restart I reloaded Firefox 5.0 and the Ask.com problem was corrected.
    My friend says this approach may work about 25% of the time to fix this kind of problem. In my case it worked and I am happy.
    Thanks all.
    Richard Ryer

  • Unable to see imported RFCs in the BPM

    Hi,
    I want to invoke a BAPI from a BPM, but I am unable to see the BAPI request / response interfaces in the BPM.
    I am trying to create Containers and Transformations in the BPM, but I am unable to select the BAPI request / response interfaces.
    What do I need to configure to invoke BAPIs from the BPM ? thanks,
    -Manish

    Hi Manish,
    you need to create three things:
    1. An abstract synchronous interface with the same message types as the BAPI
    2. An abstract asynchronous interface with the message type of the BAPI request
    3. An abstract asynchronous interface with the message type of the BAPI response
    From 2 and 3 you derive Container elements and use it for request and response of the synchronous interface.
    Regards
    Stefan Grube

  • Unable to see Subject Areas in the Manage Privileges

    Unable to see Subject Areas when tried to set permissions for the Subject Areas using Manage Priviliges option under Administration.

    Hi,
    This is the Data Mining forum.
    If your question is about OLAP, then try the OLAP forum.
    OLAP
    Thanks, Mark

  • Unable to see sales organization in the t0code bp

    Hi Gurus,
    i am trying to upload the sales area data through the fm crmx_if_partner_save for the role crm000 (sold-to-party).the fm is creating the bp but i am unable to see it in the t-code level.
    Please help.

    Hi,
    Check whether the release rule you are running has the option Auto Allocate (Inventory Tab) is YES.
    If it has NO then you have to run the Move Order Pick slip program with auto allocate move orders as YES and order types as pick wave for material allocation to happen.
    once material is allocated you should be able to view them in WCB atleast.
    After you find them in WCB but not on telnet then check you resource and device setup.
    Karthik.

  • Unable to see substituion variable in the reporting studio

    Hi,
    I have added substitution variable to the reporting studio the variable name I gave as var1
    and value as 2009,but I am unable to see the substitution variables in my reporting studio.
    What can be the reason for it?
    Thanks

    Hello,
    you have to quote the value because it doesnt start with a letter.
    Every Value which you had to put in quotes in an Calc Script or Member Formula or so, you have to quote in FR Studio too. Planning accepts the value without quotes, FR Studio doesnt.
    Bye
    Kevin

  • Unable to see any changes after the preview download

    Hi Team,
    I have registered as developer and downloaded the preview today. But i cant see any changes in the features. Am i missing something here ?
    Regards,
    Santosh

    We have moved our support forum for OS Consumer Support, i.e. almost any support of the Preview for Developer release that is not related to developing an application, to the Microsoft Community website here: 
    http://answers.microsoft.com/en-us/winphone/forum/wp8
    Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
    your votes for existing suggestions.

  • Unable to see server nodes in sap management console

    I am unable to see servernodes in sap management console.
    I am getting error like sapstartsrv.exe-application error ,
    "The instruction at " 0x00000000" referenced memory at "0x00000000".The memory couldnot be "written "
    click on Ok to terminate the programme.
    click on cancel to debug the programme ".
    Please advise me how can i see servernodes in the sap management console.
    Rewardpoints will be awarded.

    Hi,
    You get back your MMC , please do the following steps.
    1. Go to Run and type MMC.
    2.Go to file and select add/remove snap in ( alt+m).
    3.Click on add
    4.Select the SAP system from there.
    Save  the MMC console which you have created now....This should work fine.
    Thanks
    Pankaj

Maybe you are looking for