Unable to see my report in the LOV

Hello,
I have a v basic question. I have changed the report "Invoice Print Selected Invoices" to display an XML output and after I submit the report and it completes, I try to run the XML Report Publisher concurrent program. The parameter wwindow does not show the request that ran before. I have changed the Concurrent:Report Access level to User , still it does not show the report in the LOV, It shows some other Check printing reports, not the Invoice one, What other set ups do I need to do ? Pl help
Thanks
Vidhya

Hi Vidhya,
Please confirm the following:
1. Change output of concurrent program to XML
2. Setup data definition with the code exactly the same as the concurrent program short name
3. Setup template with the code exactly the same as the concurrent program short name
4. Run the report with the same user and same responsibility as you are attempting to run XML Report Publisher from.
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

Similar Messages

Unable to see any Tasks in the WCB or in Telnet.

Tasks are not getting generated in WCB and also in Telnet.
All the task setups are done.
Shipping transactions form --> Status is Released to Warehouse.
But unable to see any Tasks in the WCB or in Telnet.
can any one help me.
Thanks and Regards,
KVR

Hi,
Check whether the release rule you are running has the option Auto Allocate (Inventory Tab) is YES.
If it has NO then you have to run the Move Order Pick slip program with auto allocate move orders as YES and order types as pick wave for material allocation to happen.
once material is allocated you should be able to view them in WCB atleast.
After you find them in WCB but not on telnet then check you resource and device setup.
Karthik.

I am unable to see Shopping cart in the Purchaser's Worklist

Hi All,
i am unable to see Shopping cart in the Purchaser's Worklist after Approval, the status shows "In Purchaser's Worklist".
can any one tell me what will be the problem
Reg.
Ravi

Hi
I think, the user is having authorization role problem or Do this
Also check, in the Extended search option, include the options, Bought on behalf of as checked ('X') and Include Completed Shopping carts as 'X' with Time Frame - (LAst Year) and Status = ALL
Refer to Transaction BBP_MON_SC (Monitor Shopping cart ) to check it whether it's pending in with whom and at what status.
Also, alternatively, you can refer to BBP_PD transaction, Specify the Shopping cart number there in the Object_ID field and you will get the details.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Unable to see substituion variable in the reporting studio

Hi,
I have added substitution variable to the reporting studio the variable name I gave as var1
and value as 2009,but I am unable to see the substitution variables in my reporting studio.
What can be the reason for it?
Thanks

Hello,
you have to quote the value because it doesnt start with a letter.
Every Value which you had to put in quotes in an Calc Script or Member Formula or so, you have to quote in FR Studio too. Planning accepts the value without quotes, FR Studio doesnt.
Bye
Kevin

Unable to view FF reports in the front-end of FF 5.2 tool

After installing the FF tool on Netweaver, I am unable to see the reports from the back-end (R/3) system. The R/3 system has the FF 5.2 RTA installed and a user Id defined to connect to front-end of FF 5.2.
I configured the FF 5.2 connector, but still am unable to view reports from the front-end.
any suggestions would be helpful.
Thanks,
Kapil

I was able to resolve the issue by maintaining the gateway in the SAP adapter and running the transaction /VIRSA/ZRTCNFG on the abap side
thanks for the suggestions
Kapil

Unable to see an iView in the Portal

Hi All,
I have a scenario, where in I have an iview in a page, the page can be in the workset,this workset has assigned to a role, and this role has been give to a user,now I have a user login to the portal , i am unable to see the iview in the portal, what could be the possible reason?
Regards
Chandra

If U r not getting the Role navigation structure in the portal then make sure that the "Entry point" for the role has been set to True.
If you are getting the Role structure in the portal but not getting the iView then check the iView Property "Invisible in Navigation Area" property set to false.
Next you can check for the iView Permission , if the User has permission for te iView or not.
Hope now u can get the iView in the portal
Cheers
Chinmaya
Reward for helpful answers

I have elements 12 in Windows 7 but is unable to see mp4 files in the organiser. The sound from the file is there but no image!

I have elements 12 in Windows 7 but is unable to see mp4 (Canon G16) files in the organiser. The sound from the file is there but no image!
Other file formats from Canon is no problen. So What to do??
Roger

Me again,
A friend suggested that I do a system restore.
I did a search for system restore in Windows 7 and got a very intuitive menu.
I selected an earlier system restore point and executed the restore.
After the computer restart I reloaded Firefox 5.0 and the Ask.com problem was corrected.
My friend says this approach may work about 25% of the time to fix this kind of problem. In my case it worked and I am happy.
Thanks all.
Richard Ryer

Unable to see imported RFCs in the BPM

Hi,
I want to invoke a BAPI from a BPM, but I am unable to see the BAPI request / response interfaces in the BPM.
I am trying to create Containers and Transformations in the BPM, but I am unable to select the BAPI request / response interfaces.
What do I need to configure to invoke BAPIs from the BPM ? thanks,
-Manish

Hi Manish,
you need to create three things:
1. An abstract synchronous interface with the same message types as the BAPI
2. An abstract asynchronous interface with the message type of the BAPI request
3. An abstract asynchronous interface with the message type of the BAPI response
From 2 and 3 you derive Container elements and use it for request and response of the synchronous interface.
Regards
Stefan Grube

Unable to see Subject Areas in the Manage Privileges

Unable to see Subject Areas when tried to set permissions for the Subject Areas using Manage Priviliges option under Administration.

Hi,
This is the Data Mining forum.
If your question is about OLAP, then try the OLAP forum.
OLAP
Thanks, Mark

I am unable to see a project on the i Movie player screen

I am unable to see any project (saved or in process) in the player screen of i Movie.

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

Unable to see sales organization in the t0code bp

Hi Gurus,
i am trying to upload the sales area data through the fm crmx_if_partner_save for the role crm000 (sold-to-party).the fm is creating the bp but i am unable to see it in the t-code level.
Please help.

Hi,
Check whether the release rule you are running has the option Auto Allocate (Inventory Tab) is YES.
If it has NO then you have to run the Move Order Pick slip program with auto allocate move orders as YES and order types as pick wave for material allocation to happen.
once material is allocated you should be able to view them in WCB atleast.
After you find them in WCB but not on telnet then check you resource and device setup.
Karthik.

Unable to see XML data in the zip file

Hi folks,
Willing to think about a way to automate the setup migration, I'm looking at the iSetup functionnalities in 11i.
Technically speaking, we upgraded iSetup to 11i.AZ.H.delta.2.
I did a simple extract of an FNDLOAD API (flex values) , everything works fine. At the end I got a zip file which contains several files including the ldt file containing my data.
Having done this, I wanted to test an XML API (chart of accounts, GL currencies), both completed without errors but when looking at the zip file, no xml file containing my data exists !
I'm quite sure that it exists because I can report on those data.
is this a bug ?
Thanks for your answer.
Franck James

Franck:
This could be an issue with the zip tool you are using. You can ignore this as long as you can load and report on the given extract.
Thanks,
Lokesh

Unable to see crystal reports in Infoview

I created a crystal report by using sap R/3 tables.Now I want to publish it in BO Enterprise,so that i can view my report inb crystal reports.I tried two options 1.save as report in enterprise 2. using workbench i published in Enterprise.
When I tried to open it Infoview ,the report taking the r/3 credentials and also parameter values after that it is showing "Page cannot be displayed".so please anyone help me to get out of this one...
Thanks in Advance

"page cannot be displayed" is generic error message. In IE, go to Tools - Internet Options - Advanced tab, then uncheck "Show friendly HTTP error messages". Restart IE, then try the same step you generated the error. What is the error message now?

Unable to see any changes after the preview download

Hi Team,
I have registered as developer and downloaded the preview today. But i cant see any changes in the features. Am i missing something here ?
Regards,
Santosh

We have moved our support forum for OS Consumer Support, i.e. almost any support of the Preview for Developer release that is not related to developing an application, to the Microsoft Community website here:
http://answers.microsoft.com/en-us/winphone/forum/wp8
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

Unable to see text data in the reporting bw 3.5

Dear Gurus,
My clinet wants to see the text data for all the records in the reporting.unfortunately he cant see text data for only 5 records in the colum. i checked in the query designer for that object ,in properties its given as key and text. can any one suggest me why the text data is not comming for only that records..
Thanks in Advance.
Srikanth.

Dear Pavan,
Thanks for the reply, the query properties are already set like key and text before, the problem text is showing to all the records except 6 records,for this 6 records in the place of text it is showing only same technical name..please guide..
Thanks,
srikanth.

Unable to see my report in the LOV

Similar Messages

Maybe you are looking for