Unable to see myplugin in Windows-- Extension File Menu of InDesign while Debugging/ Run .

I couldn't able to see myplugin extesnion under file menu of Windows-->Extension of my MAC while i try to run or debug .
-myplugin.zxp is provided to my testing team and they are able to see it under file menu of Window-->Extension   as expected .
-But this is not happening on my mac when i try to run/debug my application .
Mac
: CS 5.5 and Extesnion Builder 1.5   . (version 7.5.3)
This was the same problem i faced on windows , seems it was due to the latest updates taken by users . ...But the problem was solved by changing version from 7.5 to 7.5.3 in manifest file while Exporting the build .
- To run/debug i will revert back version from 7.5.3 to 7.5 after providing the zxp , since my indesign version is 7.5 on Windows system .
Windows : CS 5.5 and Extesnion Builder 1.5 . (version 7.5)
Can some please suggest me or point me something on this .
Thanks ,
Sai Charan

Am facing another Interrelated problem with CS6 too -->Issue 2 :
   -if inDesign users take update for InDesign Version 8.0.1 [since CS6 version would be 8.0 by default ] Users Unable to See myplugin.zxp in Windows-->Extesnion .
- I Exported myplugin.zxp using InDesign CS6 Version 8.0 / Flash Builder 4.5/ Extesnion Builder 2.0 .
- This worked in all below lowest versions perfectly but not with InDesign CS6 updated Version 8.0.1
Windows 7PC :
1) CS6 -->-- Adobe Extension Manager CS6 Version 6.0.0.412
          -- Adobe In Design CS6 Version 8.0
2)CS5.5-->-- Adobe Extension Manager CS5.5 Version 5.5.163
          -- Adobe InDesign CS5.5 Version 7.5
3)CS5.5-->-- Adobe Extension Manager CS5.5 Version 5.5.1.019
          -- Adobe In Design CS5.5 Version 7.5.3
Mac Operating System :
1) CS6 --> -- Adobe Extension Manager CS6 Version 6.0.0.412
           -- Adobe In Design CS6 Version 8.0
           -- Mac OS :10.7.4
2)CS5.5--> -- Adobe Extension Manager CS5.5 Version 5.5.163
           -- Adobe InDesign CS5.5 Version 7.5.3
           -- Mac OS :10.6.8

Similar Messages

Unable to see HD in windows to recover files

Check the BIOS to make sure that all the ports (IDE and SATA) are turned on.
Check your jumpers! (never thought I'd say that again...)
The IDE drive might be bad. It is older than bejeebus and back, ya know...

hi,I've been given an old IDE HD to try and recover some family photo's from. I've dug out an older PC with IDE connections and with the faulty HD plugged in BIOS can see this HD ( along with a SATA HD that has the Windows 7 OS i boot into.Unfortunately when i boot into windows it doesn't see my second HD? I've looked into Disk management but it's not there so i can't assign it a drive letter. I've tired Hirens BootCD and tried to recover that way booting into the linux OS, that does see the drive but sticks at 50% when trying to mount or read it / can't fully remember. I've also tried Recuva but as Windows can't see the drive i can't see how Recuva can see it ? Is there any other software I could try ( that's for free ) or are my freids going to have to bite the bullet and pay someone with better gear to see if they can recover the...
This topic first appeared in the Spiceworks Community

Unable to see converted NEF to DNG files in Photoshop CS

Aloha, my laptop recently crashed and I am in the midst of trying to restore my laptop to the way it was. I am using Photoshop CS and back in December 2009 I downloaded DNG converter. I am using a Nikon D90, shooting in RAW. I don't recall what I did after downloading the DNG converter but I was able to convert the NEF files to DNG by simpling clicking on the DNG icon, selecting the file and click convert and the NEF were converted to DNG files. I was able to use my Photoshop CS with these covverted files. In the restoration of my laptop, I loaded my Photoshop CS program and then did a search on-line for the DNG converter. I found a 5.6 version and later a 6.3 version. I first downloaded the 5.6 version. I then clicked on the icon, selected the files and click convert. I can see the NEF photos being converted. However, when I went into my Photoshop CS program, I did not see any DNG files even though I saw the files being converted. I downloaded the 6.3 version and got the same results. I also went into Change Preference and selected Camera Raw 2.4 and later. But I though I am seeing the files being converted to DNG, I do not see any of those converted photos in my Photoshop CS program. Can anyone help me? Am I missing a step or two? I would appreciate y'all expertise in this matter. Also, anyone knows how to uninstall one of these DNG converters I downloaded? Thank you very much, Ron

Aloha Jim,
I went on Google and typed in DNG 6.3 converter. The following appears:
Product Adobe Camera Raw and DNG Converter Version 6.3 Platform Windows File
Name DNGConverter_6_3.exe File Size 50.6MB
Proceed to Download<http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4924&fileID=4585>
I click on the proceed to download. The follow appears.
Camera_Raw_6_3_updater.zip - ZIP archive, unpacked size 37,629,269 bytes
I assume I'm supposed click on this icon that looks like three stacks of
books and having the information next to it, Camera_Raw_6_3_updater.zip -
ZIP archive, unpacked size 37,629,269 bytes. After clicking on the icon, I
come on a window that says, Camera_Raw_6_3_updater.zip - WinRAR (evaluation
copy). In that window there are 4 folders. The first one does not have any
information except for 2 dots. The second folder is labeled META -INF. The
third folder says, payloads and the last is like a window, rectangular in
shape, white at the bottom 3/4 and the top portion is blue. It is labeled
AdobePatchInstaller.exe. Again, I am assuming I am suppose to click this. I
click it and then it looks like it is updating something, then a window that
says, Adobe Application Manger comes on which says, some updates failed to
install. Another messages says, update is not applicable. I don't recall
what I did next...tried other things but I finally got the icon (circular,
the top 1/3 white with 4 red letters, the bottom 2/3 greenish with a blue
arrow pointing down. It is labeled as DNGConverter_6_3. I clicked this
icon and get this open file - security warning window. It states, the
publisher could not be verified. Are you sure you want to run this
software. Name: DNGConverter_6_3.exe. Publisher: Unknown Publisher; Type
Application; From C:\Documents and Settings\(other info. I click on the Run
button I then get an error message saying, Installer integrity -check has
failed. Common causes include incomplete download and damaged media.
Contact the installer's author to obtain a new copy. More information at:
http://nsis.sf.net/NSIS_error.
I don't know what to do. Back in December of 2009, all I did was downloaded
the DNG file that I found on Google, click on the DNG icon, and my NEF were
converted so I could see it in my Photoshop CS.
Am I doing anything wrong. I would prefer not to invest $200 for Photoshop
CS5 since Photoshop CS along with DNG converter were meeting my needs. I
know it may take some time to write this but perhaps could you write down
the step by step process you would do from searching for the DNG converter,
selecting the converter, downloading the converter, activate it so
everything is set up for use with the Photoshop CS. I would appreciate it
very much. It has been very frustrating and time consuming in trying to
resolve this issue. I thought it would be so simple setting it up like the
first time when I first installed it.
Thanks again for responding to this matter. I appreciate it very much.
Aloha

4.0EA3 : Unable to access mapped drives (Windows) in file browser dialogs

All File Browser dialogs only allow access to by local C: (hard disk) and D: (DVD) drives. It is not possible any more to access mapped drives (which are referencing UNC paths to our file server) - i.e. Network drives.
I have tried the following accesses to the File Browser:
File -> Open : Does not work
File -> Data Modeler -> Open : does not work
Tools -> Preferences -> Environment -> Log -> Log Directory -> Browse : does not work
This worked/works fine in SqlDev 3.2.2
I tried to rule out connection/authentication problems to our SAN (the network drives are fully accessible from Windows Explorer and even JDeveloper 11.1.2.2.0) - I created a drive mapping to a share on my local hard disk. Can't see this mapping from within SqlDev either
Problem occurs on Win7 64-bit
Looking forward to Oracle feedback or to see if other users find the same issue
Alan

https://drive.google.com/file/d/0B2daepPy6k7nbGl4d2xobFJFVTg/edit?usp=sharing
Hi Jeff
Many thanks for your reply.
No - the location drop-down only shows my C: (Hard Drive) and D: (DVD Drive).
With further playing, I did find that if I qualify a script on a network file share with the full UNC path, it successfully opens the script.
The problem is that I cannot navigate to locations on mapped drives.
Having successfully opened a sample script, there is now a shortcut to the folder/directory of my shared scripts in the left pane of the open (file browser) dialog box. Its a good workaround.
I have shared a screenshot on my Google Drive (this forum does not allow insert of images or attachments ?)
Alan

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

HT2905 I want to delete duplicates from my iTunes music but cannot see "Display Exact Duplicates" in File menu.

Hi,
I want to delete duplicates from my iTunes music but and iTunes help says to click on "Display Exact Duplicates" in File men but I don't appear to have this function. Where else can I look?

Thanks Kappy. I had just found it but thanks reply. Next question is: Is there a quick way to then delete the duplicates without having to select each one and delete?

Windows 7 start menu crashes InDesign CS5

If I check the Windows 7 option to "Store and display recently opened items in the Start menu and on the taskbar" InDesign crashes the next time it opens. Has anyone else experienced this problem?

Thanks Bob. I am trying to figure out why this crashes my system. One thing I discovered is InDesign doesn't like to open on my second monitor. I have moved it to my primary monitor and that has fixed some of the issues but not all of them. I have even had problems with InDesign crashing when I try to open a file from Bridge.

CS4 Windows 7 64-bit. InDesign won't run.

Error message: "missing files, please reinstall". On reinstall, setup hangs at "preparing to install". How do I get this app loaded and running?

Can't recreate the screen shot - I uninstalled InDesign in order to reinstall. During the reinstall process for CS4 (only installing the InDesign app) it starts the process
and the first screen displays "Preparing to Install..." - but nothing happens -- I waited for over 10 minutes (twice) and no progress was made.

How to see the enitre ITAB contents and down load them while debugging ?

Hi All ,
One of my ITAb will be populated with 2000 records . Is there any option in Debugging editor to download and see all the fields and all the records at a time instead of 5 records with few fields. We are working in ECC 6.0 .
Thanks
Dharma P

Hi
You can click on 'Excel icon' while debugging, to download the contents of the internal table.
Also, you can click on the '+' icon to increase the internal table view, so that more entries are displayed.But, you need to use navigate buttons to scroll between columns.
Regards
Raj
Message was edited by:
Rajasekhar Dinavahi

Why is the Device Backup grayed out in my iTunes File menu?

I am searching for a way to Backup my iPod Classic, but the Device Backup is grayed out in my iTunes File menu? My iTunes is running on a 64 bit Windows 7 Machine. Has this been covered in a Discussion that I haven't found yet? My iTunes works fine on this 64 bit Machine so far. Any help would be appreciated.

Just select the Image trace panel from the window menu and then customize it.

I have elements 12 in Windows 7 but is unable to see mp4 files in the organiser. The sound from the file is there but no image!

I have elements 12 in Windows 7 but is unable to see mp4 (Canon G16) files in the organiser. The sound from the file is there but no image!
Other file formats from Canon is no problen. So What to do??
Roger

Me again,
A friend suggested that I do a system restore.
I did a search for system restore in Windows 7 and got a very intuitive menu.
I selected an earlier system restore point and executed the restore.
After the computer restart I reloaded Firefox 5.0 and the Ask.com problem was corrected.
My friend says this approach may work about 25% of the time to fix this kind of problem. In my case it worked and I am happy.
Thanks all.
Richard Ryer

I followed your help directions on "Corrupt extension files" under "Unable to install add-ons", foolishly deleting the files you told me to. Now firefox won't open. I tried reinstalling firefox but it still won't open. Now what do I do?

I was trying to install the SEOQuake add on. After clicking install Firefox would hang up saying the script had timed out and asking if I want to stop it or continue. Didn't matter which option I chose nothing would happen. The only way to stop it was to close Firefox and restart. Tried restarting the computer. Still wouldn't install. Tried installing the Outwit add on and got the same error leading me to conclude it was a problem with Firefox, not the add on. I found this help page <http://support.mozilla.com/en-US/kb/Unable+to+install+add-ons?s=addons+won't+install&as=s> and did everything it told me to. Finally at the end I got to "Corrupt extension files". I foolishly deleted the files you told me to and now Firefox won't even start! I tried reinstalling Firefox and it still won't start. Tried restarting the computer. I have no idea how to get back to where I was let alone install the add ons I wanted to install. Please help. At this point I'd just be happy to be able to get Firefox working.

See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Unable to see files in iTunes File Sharing

I'm using the latest version of iTunes, and have both an iPad and iPad2, both fully upto date with the latest version of IOS. Everything I now write about applies to both iPads.
Basically, I'm unable to see files that are sent to iTunes from the iPad. The ipad is connected to the PC, I select the file I want to send from the appropriate app, and then "send to iTunes". The file never appears under the app that sent if from the file sharing section of the device in iTunes. Even forcing another sync doesn't help either.
Here's the strange thing, if I unplug the iPad, then reconnect it, go back to file sharing page in iTunes, and click on the appropriate app, the files show. However, if I click onto another app in the file sharing list and back to the original one, the files have disappeared.
By way of example:
I connect my iPad to iTunes, after it automatically syncs, I select the iPad, choose the apps menu and scroll down to the file sharing window.
On my iPad, I open Pages, select a document and send it to iTunes.
Back on my PC, the file doesn't show under the Pages app in the file sharing window.
I resync the iPad, still no change.
I disconnect the iPad, reconnect and let it automatically sync again.
I navigate back to the file sharing section and click on the Pages app. Low and behold, the file is now showing.
I click onto any other app that is listed in the file sharing section, then click back to the Pages app. The file no longer shows.
It will remain like that until I unplug the ipad, and connect/sync again.
Exactly the same thing will happen regardless of which app I choose that supports file sending to iTunes.
Finally, just to confuse matters further, the reverse is also true. Adding a file to the file sharing section doesn't appear in the list, and the iPad can't see it - until I unplug and reconnect again. After that, same issues happen as already described.
Any assistance would be appreciated.

This is a bug in the Windows version of iTunes which I reported to Apple nearly a year ago (back when iTunes 10 came out), but they refuse to fix. I see the problem with my iPhone 3GS and iPad 2.
Basically file sharing stops working if you click on more than two or three apps in the file sharing list. The work around is to disconnect the iOS device and reconnect it. Then make sure to click only the app you want to transfer to/from. If the document list goes blank, disconnect and reconnect again.
It's really annoying and I wish Apple would fix it. Supposedly it was also broken for the Mac version of iTunes and was quickly fixed there, but not for Windows.

Unable to see D800 raw files - using Lightroom 3.6 & CS4

Hi,
I have just purchased a Nikon D800 and I am unable to see the .NEF files within either Lightroom 3.6 or CS4. Can anyone help me? I have read on other forums that you need to install ACR6.7 but those users were all using newer versions of software. I have downloaded ACR 6.7 - are my programme versions compatible and will LR & Bridge pick up the new version automaticaaly or do I need to do anything? I am running Windows 7.
I'm not sure if this will make any difference but within my camera menu I chose NEF (RAW) recording to be Lossless Compressed.
Thanks
Jo

ACR 6.7 can only be used with PS CS5. You will have to use one of the following options.
1. Use the latest Adobe DNG converter 6.7 to convert your .NEF files to dng (retain a copy of the .NEF's) then you can import into LR 3.6.
2. Consider upgrading to LR 4, you can download the LR 4.1 RC2 and run for the trial period untill the Final LR 4.1 is released.

I am unable to open scanned documents (with .jpg file extension) in my e-mail inbox, on the Mail app on my iPad. Please provide a clear answer. Thanks a lot.

I am unable to open scanned documents (with .jpg file extension) in my e-mail inbox, on the Mail app on my iPad. Please provide a clear answer. Thanks a lot.

Can you actually see that the attachment has a .jpg extension? Some mail systems strip it off (I've seen AOL do that) which makes the attachment difficult to open.

Unable to see myplugin in Windows-- Extension File Menu of InDesign while Debugging/ Run .

Similar Messages

Maybe you are looking for