Unable to see old events
When synching the iphone to the me account. I can see future events but no events further back than 30 days.
On the wewbsite I can see older events. On my macbbok I can see older events.
ideas?
thank you
As mzamp01 stated, you need to set the calendar on the iPhone to sync farther back than 30 days. Go to Settings->Mail, Contacts, Calendars->(very bottom) Sync->All Events. Now it should start syncing all the events instead of the one just 30 days back.
Similar Messages
-
I am unable to see my old photos/events on IPhoto and I fear I might have lost them for good. It looks it all started when I upgraded my OS to OS X Maverics.
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
Hi,
I can't see any events prior to april 2006. In preferences the two "delete" options never has been marked. I see birthdays though.
I use Ical 2.04. Any way of getting the old events, and any way I can make it not dissapearing in the future?
Thanksll
-
I have an older phone, the Iphone 4. For some reason, all of my calendar events are gone. I can't see old, present or future events. Help me please. I need this information.
Please please help me, if you know how.
-
I see only 1 month old events to my calendar?
We use Exchange2003 and it is impossible to see the events prior to 1 month. They are removed when synchronizing with ActiveSync?
Do you have the same problem? or idea?
Thank you.You must select another period in General/Mail,Calendar... and scroll down, you see:
1. New Invitation Alerts
2. Time Zone Support
3. Default Calendar
4. 'Sync' selection
Select 'Sync', and choose the period you want (default: 1 month)
The 'Sync' selection appear only if you have an Exchange mail with the calendar selection ON.
Thanks for your help.
Fabien -
Unable to see interface on ASA 5510 Firewall
Hi All,
I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.
Below is the output.
ciscoasa# sh int ip br
Interface IP-Address OK? Method Status Protocol
Ethernet0/0 x.x.x.x YES CONFIG up up
Ethernet0/1 x.x.x.x YES CONFIG up up
Ethernet0/2 unassigned YES unset administratively down down
Internal-Control0/0 127.0.1.1 YES unset up up
Internal-Data0/0 unassigned YES unset up up
Management0/0 192.168.1.1 YES CONFIG up up
Please suggest what could be the reason.
Regards
PankajHi Ramraj,
Even i have the base license for my ASA 5510 which is showing all the 4 interfaces in sh ver. I don't think so license would be an issue. There should be some IOS code bug that needs to be upgraded. If this goes for an OS upgrade it should get resolved.
Its not showing up in sh ver . As Karsten said he might be running on old IOS version.
fy-a# sh ver
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 6.4(5)
Compiled on Thu 14-Jun-12 11:20 by builders
System image file is "disk0:/asa844-1-k8.bin"
Config file at boot was "startup-config"
fy-a up 1 day 1 hour
Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
Number of accelerators: 1
0: Ext: Ethernet0/0 : address is 2c54.2d0c.8f1a, irq 9
1: Ext: Ethernet0/1 : address is 2c54.2d0c.8f1b, irq 9
2: Ext: Ethernet0/2 : address is 2c54.2d0c.8f1c, irq 9
3: Ext: Ethernet0/3 : address is 2c54.2d0c.8f1d, irq 9
4: Ext: Management0/0 : address is 2c54.2d0c.8f1e, irq 11
5: Int: Not used : irq 11
6: Int: Not used : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 50 perpetual
Inside Hosts : Unlimited perpetual
Failover : Disabled perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 0 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has a Base license.
Serial Number: JMX1AXXXXX
Running Permanent Activation Key: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Configuration register is 0x1
Configuration has not been modified since last system restart.
fy-a#
Ramraj please do correct me if am wrong.
Please do rate if the given information helps.
By
Karthik -
Why is ical on iPhone 5s missing old events only on list view??
i have the latest ios7 on my iphone 5s. i only noticed this recently that old events more than 1 year old are missing from ical once i am in list view (magnifying glass) but present on day/week/month view? On settings it is set to sync all events and events are present but not via list view. The reason this is annoying as month view is just dots which does not help if you have different coloured categories.
Its puzzling bth. With events showing when not in list view shows icloud is working but i don't get this?
thanks denI am not witnessing any instability problems on my 5S. I would check with each of the developers to see if their apps are compatible with iOS8 before deciding this is a problem with your individual device or the iPhone all together.
-
Hi
I had one strange issue.Willbe greatful for some inputs.
User is using one report.He sees report in .NET application which fetches data from BW.The report is based on one BW query.
In BW query,we are using one characteristic SALES_ORG which has hierarchy SALES_HIER_2000 activated on it.User belongs to node 5000 in this hierarchy.We have a hierarchy node variable on this characteristic in Global filter area.This variable has a default value of 100 which is higher level node in SALES_HIER_2000 hierarchy.so when ever query is run,the variable is input with this top level node.But I think our user roles are built in a way,that users can see only their hierarchy nodes data.In our users case,he can see only 5000 hierarchy node data to which he belongs.
Then the hierarchy is changed to SALES_HIER_3000.My user now belongs to hierarchy node 8000 in this new hierarchy.So this new node 8000 is included in his role so he can continue seeing reports.Just to make a point here,this 8000 node also comes under higher level node 100 in new hierarchy as in old hierarchy.But the problem is,he is unable to see reports.
I noticed that in our query we are still using same hierarchy node variable.Do I need to create one new hierarchy node variable as we are using new hierarchy eventhough both old and new hierarchies are on same characteristic SALES_ORG.
Also,I noticed that in this old variable which we are still using,we have default value 100 from old hierarchy.Do I need to change this default value eventhough in new hierarchy also,100 is the higher node to which new user's node 8000 belongs to?..........
what can be the reason that my user is unable to see reports?Please advise.
Best Rgds.Perhaps I was not clear in my original help message. When the report is run from within report builder, there is no footer in the report. However, when the same is run from the application, one footer is printed. How to change this footer is the problem.
-
I'm new to mac. Just started out. Have OS 10.8.3. I have an HP 1315 printer. It prints and copies, wont scan. I see old threads on this, nothing recent. ?can i make this work, or do i need a new printer??
Hi Newbie111
I see that you are unable to scan with the Photosmart 1315.
What driver are you using?
The driver listed in the url below is a basic print driver that will allow you to print only.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ps242muc&c c=us&dlc=en&lc=en&os=1006&product=61956&sw_lang=
You can try using the apple drivers in the url below.
http://support.apple.com/kb/DL907
If you have any further issues please let me know. -
Hi,
We have a SharePoint 2013 doc library based on a custom template, which has been migrated from 2010.
We are unable to see existing documents in a Document library created using this template while saving a document directly in it using explorer mode, However we can save files and even see them in explorer mode, only when we try to save a new document there
directly, we cant see the old docs.
All the OOB libraries work fine.
Below is the normal behavior while saving a file, however nothing comes up when saving on this custom template librarySolved it myself guys... (Well the major part)
Got help from here...
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/blank-open-save-dialog-when-browsing-document-library-from-office-clients.aspx
and
http://www.sharepointconfig.com/2011/02/vs2010-list-definition-template-missing-file-dialog-view/
with some tweaks of my own..
Still working on it because its showing SharePoint 2010 header... And I need 2013 look... -
How to see old successfully delivered messages in Adapter Engine
We are unable to see the messages that were successfully delivered by Adapter Engine more than a day.Ho do we see old successfully delivered messages by Adapter Engine.We are only able to see the messages that were 1 day old.We are using PI 7.1.
We are able to see the older messages in Integration Engine as per the config in sxmb_adm.
Any Help greatly appreciated.
Thanks,
AravindOnly message that contain error,holding,not delivered are getting persisted not the sucessfully delivered ones.
Is there any Archiving scheduled for your Adapter Engine?
I want to see the old messages that were delivered sucessfully
In Message Monitoring Itself select Archive (instaed of Database) and make a search.....if archiving is scheduled then you should be able to see the messages by this option.
Regards,
Abhishek. -
Get time machine to see old backups
Hi all,
recently i had a problem that resulted in having to restore from a time machine backup. Since then i have been unable to see my previous backups within time machine
The sparse bundle is still intact, i have not allowed it to backup knowing that it will more than likely nuke my old backups.
So far i have tried:
- removing and reselecting the time capsule
- removing com.apple.timemachine.plist
- inheriting the existing sparsebundle.
any help on this would be much appreciated.
CheersWhile in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.
-
Unable to view the events saved on my iPhone on my MacBook's calendar/iCloud
Unable to view the events saved on my iPhone on my MacBook's calendar/iCloud
When looking through my calendar via my MacBook/iCloud, I am only seeing people's birthdays from my contacts and not seeing any events saved from my iPhone4s. Is there any logical explanation for this? My settings perhaps? I've been trying, but to no avail.varunsharmaapplefan
http://support.apple.com/kb/ht5209 might help you. An iPhone 4 can airplay content from apps that support airplay and iTunes but it cannot mirror. If your game does not have airplay in the app you cannot mirror it to the apple TV so I don't know if you can play just the music. You should have no problem playing your iTunes over airplay though.
This may also help http://support.apple.com/kb/HT4437
Regards
Jules -
got new iMac, I had completed the migration from PC to new iMac, but still unable to see all the apps and music that were saved from the old PC to new iMac. Please help.
My guess is the 30-day trial period has expired but you didn't remove the trial before installing the full version. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip. -
Where are my old events in Cal?
I can no longer see my old events from 2010 and 2011 in iCal? Where are they? I have not deleted them. Any help would be appreciated.
Many thanksMary. Another Forum mentions some problems about iCal not deleting events and relating this to a possible glitch in 10.5.5. I wonder then whether my problem is yet another glitch.
Maybe you are looking for
-
I have a power book g4 can i upgrade my current os 10.4.11 to 10.6
I would like to up grade my power book g4 from its current os 10.4.11 to 10.6.8. Is this possible
-
Transfer between storage types and putaway strategies
Dear All, Here is my scenario and please guide me on as detailes as you gurus can on how to proceed achieve this: When receiving good from a PO the materials are received in 902: How to move
-
Dropped my iPhone 5 and now my screen is all different colors with black lines
i dropped my iPhone 5 and my screen was already cracked but I dropped it and now my entire screen is different colors and black lines going up and down it.
-
I mean, besides from going into the song's info, is there a different way that I can see the lyrics while listening to the song?
-
hello, I'm trying to sample my scxi module (SCXI-1100 32Ch analog input module) at 10Hz... so I'm taking my samples in a timed while loop... I was wondering if I had this wired correctly... I'm sampling 16 inputs of the scxi-1100... inside my timed w