Unable to see page in design view
Is someone able to tell me what it is about this page that
offends Dreamweaver's design view sensibilities?
I am stuck.
Thank you.
http://inbx.us/designhelp/
Probably one, or more of the 54 errors found here -
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Finbx.us%2Fdesignhelp%2F
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"PaulBroni" <[email protected]> wrote in
message
news:ge4sea$23u$[email protected]..
> Is someone able to tell me what it is about this page
that offends
> Dreamweaver's design view sensibilities?
>
> I am stuck.
>
> Thank you.
>
>
http://inbx.us/designhelp/
Similar Messages
-
Unable to see JSF pages in Design View after upgrade to Netbean 6.1
Hi:
I have a Sun Java Studio Creator Update 2 Project and I upgraded to Netbean 6.1 according to Sun's migration guide. It compiles and runs OK, but i can not see any page in design view at all.
Any one has any idea?
thanksHi Sriram,
I want to see commit stats on SM50 while background job runs. I unable to see on after upgrade.
all db stats are updated. On Sm50 screen unable to see Database commit count.
Cheers,
Harish -
How to add addtitional pages in design view?
How do I create additional pages in design view? I have tried using NEW PAGE AFTER, but that doesnt add another page in design view, like I need.
I am creating a report that uses 8 subreports per page to dynamically create labels. Currently I have a report header, and am using the page header to arrange the subreports so the top of each subreport prints on the top of each label. The fields in the subreports can grow, and fill in the label from the top down.
I need to create a multiple pages using this format, but I dont know how to add more pages in design view. Essentially I need subreports 1-8 on page 1, 9-16 on page 2, etc. I would like to preserve the formatting I have created thus far, but I can always change it if I have to.In attempting to create the label sheets I needed, I ended up creating 14 separate reports (which report on 6 individual queries), because there are 14 pages worth of labels that need to be created. What I wish to accomplish is to condense these 14 reports down to 6 reports. One for each query. What I absolutely cant find a way to do, is to get Crystal Reports to allow me to customize subreports on consecutive pages. Again, I have 8 subreports on each page, which have been formatted to fit on 8 labels when printed. Each subreport is identical in design, but has a different range selected (i.e. my driving value in each subreport has been modified with Select Expert to be between 1 and 5, or 6 and 10, or 11 and 15). This is how I have been able to return 5 consecutive results on each label, with the next label returning the following 5 results.
My ultimate question: Is it possible to create a multi-page report using this method? -
MUSE 2014 crashes when trying to open a page in 'Design View'
I get this error message when I try to open an existing page in Design View.
The page tries to open, displays part of the page, then stalls, then crashes.Still trying to use MUSE 2014, after launching the program I can open two pages from the Plan view, when attempting to open a third I got this message:
I am running Windows 7 64 bit operating system with an Intel Core i5 CPU with 8gb of RAM. -
Can't see my page in design view, usind split screen
Hi everyone, I am new to these forums and new to dreamweaver,
I have a problem which I have no idea how to fix.
I have been using the program (in my limited ability) saved
my work, then when I opened it today, I have no design view in Code
and Design view. The top part is fine but all I have is lots of
lines at the bottom.
The actual website seems fine, but just means I can't make
any changes other than in code view, which I a not skilled enough
to do.
Please help.
Regards
HypnomanThere are a lot of problems with this page!!
You will need to clean up your code! You have invalidly
nested tags, empty tags, unclosed tags!
If you would like a quote to clean up this page, send me a
message! -
Unable to see SAP BusinessObjects Document Viewer template in 7.4 portal
Hello Experts,
We are looking to integrate dashboards created with BOBJ design studio into enterprise portal (NW 7.4). We have followed the steps mentioned in the blog Integration of BOBJ with SAP Portal.
Namely:
1. Taken the com.sap.businessobjects.iviews.par and com.sap.businessobjects.iviews.templates.epa files from the BI server
2. Imported the EPA file into the portal
3. Converted the com.sap.businessobjects.iviews.par file into EAR file and deployed it into the portal
4. Created System alias for the BI system
5. Configured SSO between portal and the BI server
After doing these steps when trying to create the Business Objects iView we are unable to see the SAP BusinessObjects Document Viewer template in the portal. Can anyone let me know if we have missed some additional configuration that has to be done?
Regards,
SaurabhHi Experts,
Issue has been resolved. After importing the EPA file into the portal, we missed out restarting the portal. Once this was done I am now able to find the SAP BusinessObjects Document List and SAP BusinessObjects Document Viewer templates in the iView creation wizard.
Regards,
Saurabh -
Viewing CSS fomated pages in Design View DW MX 2004
I am using DW MX 2004. I have imported a new clients site and
am trying to view the pages in DW. The web site is completely
formated using CSS. When the document is opened in DW I do not see
any of the page. The page views fine when previewing in a browser.
How do I get the css to execute/render in DW MX 2004s design view?
Thanks in advance for any help!
TroCatDefinitely 'exceeded the capability' of DW's
DoWhatIWantNotWhatICode
function.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
": Nadia : ** Adobe Community Expert **"
<[email protected]> wrote in message
news:[email protected]...
> Yep, especially the 'unclosed' tag errors ;-)
>
> --
> Nadia
> Adobe® Community Expert : Dreamweaver
> ----------------------------------------
> CSS Templates |Tutorials |SEO Articles
>
http://www.DreamweaverResources.com
> ~ Customisation Service Available ~
>
http://www.csstemplates.com.au
> ----------------------------------------
> CSS Tutorials for Dreamweaver
>
http://www.adobe.com/devnet/dreamweaver/css.html
>
>
> "josie1one" <joleros[nospam]@yahoo.com> wrote in
message
> news:[email protected]...
>> You have many errors which when fixed could make all
the difference:
>>
>>
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.exteriorinnovations.com%2F
>>
>>
>> --
>> Jo
>>
>>
>> "trocat" <[email protected]> wrote
in message
>> news:[email protected]...
>>> Exceeded the capability of DWMX 2004? What I am
asking is, how can I
>>> view a
>>> page that was designed and layed out with CSS,
tables, buttons, etc.in
>>> DW 2004
>>> design view. The page is completey visible in
Front Page 2000 in it's
>>> design
>>> view. But not in DW 2004. Am I missing
something? It seems like FP
>>> renders the
>>> CSS to show you the page as you edit. DW 2004
does not show me anything
>>> but the
>>> background in design view. I see DW 8 has a
toolbar called "Style
>>> Rendering".
>>> Is DW 2004 just not capable of this? You can
view the code source of the
>>> page I
>>> am referring to at
http://www.exteriorinnovations.com.
>>>
>>
>>
>
> -
Cannot view body of page in Design View with PHP
Hello, I hope some one can help me. I have a website that I
am working that I am unable to view the body of the page in Design
mode. This is a php file. I can preview the page fine by pressing
F12, so it appears PHP is installed and my test server is working
fine. Also my manager is able to view the body fine, so it appears
that only I am affected. Both of us are using Dreamweaver CS3. Is
there some setting on my local copy of Dreamweaver that I can
change to make the page appear?CummingCorp wrote:
> Hello, I hope some one can help me. I have a website
that I am working that I
> am unable to view the body of the page in Design mode.
This is a php file.
If the body of the page doesn't display in Design view, it
means that
your include files contain html, head, and body tags. Include
files
should contain only the code that you want included at that
point. So,
inc_header.php should contain only the div or other code that
displays
the header - and NOTHING ELSE. The same goes for
inc_footer.php.
When the page and the include files are combined, they should
have one
DOCTYPE declaration, one html tag, one head, and one body.
Think of them
as pieces of a jigsaw. On their own, each element is
incomplete, but
together they make a complete picture with nothing left over.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
Spry UI 1.7 slideshow images cascade down page in design view
When I put in the Spry slideshow all the images go down the page in bullets. It works fine in the browsers, so it is no problem. But... it is SO annoying because I am trying to finish off the page and do some stuff under this slideshow but i can see there. So it has messed me all up because I am not good at just hand coding the website... I have to do a little of both... Others have kind of suggested to just live with it... but I just cant
The only reliable view in DW is the Live View. Design view is OK for very simple layouts and documents. As soon as it becomes more complicated, then you cannot rely on design view.
And even though Live View can give a better picture of what you are doing, you must always check your design in all of the target browsers.
Gramps -
Hello.
Actually, I am facing unexpected issue with responsive design package for SharePoint 2013 environment. I
am done with lots of try here and there but no luck yet so finally putting my issue here to get the help on this.
I have applied responsive design package from this codeplex solution - http://responsivesharepoint.codeplex.com/
Which is working as expected , however when I add the following snippet in "Banded" Page layout , I am unable to see the Page Content field on pages at subsite
level, however I can see the same field on root site pages of site collection.
<!--CS: Start Page Field: Page Content Snippet-->
<!--SPM:<%@Register Tagprefix="PageFieldRichHtmlField" Namespace="Microsoft.SharePoint.Publishing.WebControls" Assembly="Microsoft.SharePoint.Publishing, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"%>-->
<!--MS:<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server">-->
<!--PS: Start of READ-ONLY PREVIEW (do not modify)--><div id="ctl02_label" style="display:none">Page Content</div><div id="ctl02__ControlWrapper_RichHtmlField" style="display:inline" aria-labelledby="ctl02_label"><div align="left"><div nowrap="nowrap"><span nowrap="nowrap">Page Content</span></div><div><div>Page Content field value. Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.</div></div></div></div><!--PE: End of READ-ONLY PREVIEW-->
<!--ME:</PageFieldRichHtmlField:RichHtmlField>-->
<!--CE: End Page Field: Page Content Snippet-->
can you please direct me to resolve this issue ? ( I wonder
if anyone has face the same )
Even , I don’t see the page content field in sub site pages for default "Blank Web part Page layout".
I have also noticed that in responsive design webpart page layout is having only
"Page Image" field in first row as shown in following screen:
While in default publishign design , I can see many page content fields as shown
in following screen:
Is this by responsive design ? or Is there any problem in page layout - I am not sure !! :(
Looking really forward for the resolution on this issue.
Thanks and Best regards,
Dipti ChhatrapatiHello,
Just sharing the root cause of this issue which may help to others facing same.
The reason behind this behavior was actually silly :) which is always the case once we know it !
somehow , page content types was not having "Page-Content" filed rather it was using publishing columns but not page layout columns and hence I was unable to see the page layout columns in my page.
Thanks and Regards,
Dipti Chhatrapati -
Open hidden page in Design View
I have hidden a page in my form and I need to edit
it but cannot access the page in the Design View.
What is the best way to make the page visible for editing?
Thanks nHighlight the page in the Hierarchy view then on the object palette change the presence to visible ....then you will be able to edit it.
Paul -
Unable to create Tables in design view
One of the two problems I am having (the other will also be
posted) is that I am no longer able to use Design View to Insert
Tables at all - I get the following error message: (I made a
printscreen of the error but not sure how to embed the picture in
this post so here is the message verbatim).
"While executing objectTag, the following JavaScript error(s)
occured:
At line 26 of file "Macintosh HD:Applications:Macromedia
Dreaweaver 8:Configuration
bjects:Common:Table.htm":
Type Error: cmdDOM.parentWindow.createTableStr is not a
function"
I can create tables only if I type the html for them by hand
into the code pane. The file that the error message references does
exist, and appears to look fine (code-wise). I've also tried
uninstalling and reinstalling DW8, removing and recreating the
Configuration Folder as well as the site prefs and site definitions
- nothing has cured this problem.
I am using DW8 v. 8.0.2 on a Mac Quad G5 running OS X 10.4.6.
I am positive that I did not have this problem, or any of the other
current problems, with DW MX , and I installed DW8 as a stand-alone
app so that I could still use MX if needed. This and the other
problems don't occur with MX but I would really like to get them
solved because 8 offers other benefits that I want to be able to
use.
I'm wondering if anyone else has had this problem and managed
to find a fix for it.One of the two problems I am having (the other will also be
posted) is that I am no longer able to use Design View to Insert
Tables at all - I get the following error message: (I made a
printscreen of the error but not sure how to embed the picture in
this post so here is the message verbatim).
"While executing objectTag, the following JavaScript error(s)
occured:
At line 26 of file "Macintosh HD:Applications:Macromedia
Dreaweaver 8:Configuration
bjects:Common:Table.htm":
Type Error: cmdDOM.parentWindow.createTableStr is not a
function"
I can create tables only if I type the html for them by hand
into the code pane. The file that the error message references does
exist, and appears to look fine (code-wise). I've also tried
uninstalling and reinstalling DW8, removing and recreating the
Configuration Folder as well as the site prefs and site definitions
- nothing has cured this problem.
I am using DW8 v. 8.0.2 on a Mac Quad G5 running OS X 10.4.6.
I am positive that I did not have this problem, or any of the other
current problems, with DW MX , and I installed DW8 as a stand-alone
app so that I could still use MX if needed. This and the other
problems don't occur with MX but I would really like to get them
solved because 8 offers other benefits that I want to be able to
use.
I'm wondering if anyone else has had this problem and managed
to find a fix for it. -
Unable to insert table in design view???
Im using Dreamweaver MX 6.0, been using it for a while
trouble free. Recently installed it on my new Vista laptop, install
went fine, program opens fine. I was in design view today, tried to
insert a table and was initially getting some weird error message,
but the table WAS created. After a few minutes I went to make a
change and the program crashed. Started Dreamweaver again, tried to
insert a table and nothing happens. I can click the insert table
button, try Insert >>> Table, and nothing happens, no
error message, nothing.
If I manually enter the code to create a table, I AM able to
do that, and I can edit it in design view, such as splitting a
cell, etc.. Anyone have any ideas? Thanks.
-Joey> The build is 6.0.1714.0
ANN: 6.1 Updater on build 1714
Macromedia has been working with our customers to track down
the source
of problems a minority of users have been having with the ...
Dreamweaver MX
6.1 updater. Several users reported that the updater
incorrectly indicates
that it cannot find the Dreamweaver
application or executable file in the specified folder and
doesn't perform
the update. While researching this, we found that there were
several
different causes for similar issues. Those solutions are all
detailed in the
technote at:
http://www.macromedia.com/support/dreamweaver/ts/documents/dmx_updater_issues.htm.
However, we also noticed that many customers were trying to
update a build
of Dreamweaver MX, 1714, that was never legally released to
the public or
made available for purchase. The release version of
Dreamweaver MX 6.0 is
build 1722, and build 1714 was only released to a small group
of beta
testers under a non-disclosure agreement. Beta testers
received the final
build of Dreamweaver MX at the completion of the beta
program.
Because build 1714 is not a commercial release, it cannot be
updated and
should not be used for any purpose as it is not a legally
licensed version
of Dreamweaver MX. To purchase a copy of Macromedia
Dreamweaver MX, visit
our online store at:
http://dynamic.macromedia.com/bin/MM/store/US/home.jsp
Thanks to all customers who provided detailed information
that enabled us to
track down the installer issues much more quickly than we
could without your
help.
Matt Brown Dreamweaver and Contribute Community Manager
Sorry I can't help more than that.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Joey_330ci" <[email protected]> wrote in
message
news:[email protected]...
> Version 6.0.1714.0 Thanks! -
Cant view whole page in design view
Hello, I recenty ran into a proble in DW8 that I cant solve.
I went to open up one of my pages to update it within
dreamweaver and when I did all I saw was a table on the left side.
The body of the page was missing (just a grey background). All code
appears there including the stuff that is within the body that I
cant access or see. If I click on a line in the split view I should
see where that line is in the design portion of the split view.
Unfortunately I do not, all I see a huge cursor blinking where the
entire body should be (now grey).
What happend, how can I fix this? The web site is Ferttek.com
and the page that is goofed up in DW is the contacts page, also
called index-4.html. I have attached the entire code from that page
if that helps.Add this to the code you posted........
ces please leave the following
information;</p></td>
</tr>
</table>
<table width="430" border="0">
<tr>
<td><ul>
<li class="style1">Name </li>
<li class="style1">Address</li>
<li class="style1">Phone number</li>
<li class="style1">e-mail address (your e-mail will not
be shared with
other marketing companies)</li>
<li class="style1">Nature of request, please be as
specific as possible
so we may handle your request as quickly as possible.
</li>
</ul>
<p align="center"><a href="index.html"><img
src="Discounts available
starburst.png" width="150" height="150"
border="0"></a></p>
<p> </p></td>
</tr>
</table>
<p> </p></td>
</tr>
</table>
</div>
</div>
<p align="center"><span class="style33">Guest
Book </span></p>
<div style="margin-left:25px">
<div align="center">
<p><span class="style30"><span
class="style28">Please note that the
guest book feature of this page is under construction and is
not
available at this time</span>.</span><br
style="line-height:16px">
</p>
</div>
<table cellspacing="0" cellpadding="0">
<tr>
<td style="width:208px; height:233px"><img
src="sources_Y82CZ7U8h0/images/title4_3.gif"
alt=""><br>
<br style="line-height:12px">
<strong>Customer Service:</strong><br>
Telephone: 1-630-841-2988<br>
FAX: N/A<br>
E-mail: <span><a
href="mailto:[email protected]">[email protected]</a></span><br>
<br style="line-height:14px">
<strong>Web site questions:</strong><br>
Telephone: +1
959 603 6035<br>
FAX: +1
101 889 9898<br>
E-mail: <span><a
href="mailto:[email protected]">[email protected]</a></span><br>
</td>
<td style="width:212px; height:233px;
background-image:url(sources_Y82CZ7U8h0/images/y1.gif);
background-repeat:repeat-y"><div
style="margin-left:30px"> <img
src="sources_Y82CZ7U8h0/images/title4_4.gif"
alt=""><br>
<br style="line-height:15px">
<form action="" enctype="multipart/form-data"
id="form">
<table cellspacing="0" cellpadding="0" class="form">
<tr>
<td style="width:173px; height:26px"><input
name="Input" type="text"
value="Name:"></td>
</tr>
<tr>
<td style="width:173px; height:26px"><input
name="Input2" type="text"
value="E-mail:"></td>
</tr>
<tr>
<td style="width:173px; height:126px"><textarea
name="textarea"
cols="0" rows="0">Message:</textarea></td>
</tr>
<tr>
<td style="width:173px; height:19px"><br
style="line-height:2px">
<img src="sources_Y82CZ7U8h0/images/spacer.gif" alt=""
width="100"
height="1"><a href="#"
onClick="document.getElementById('form').reset()">clear</a><img
src="sources_Y82CZ7U8h0/images/spacer.gif" alt="" width="20"
height="1"><a href="#"
onClick="document.getElementById('form').submit()">send</a>
</td>
</tr>
</table>
</form>
</div></td>
</tr>
</table>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
</div></td>
</tr>
<tr>
<td height="51" style="width:471px; height:100%;
background-image:url(sources_Y82CZ7U8h0/images/bottom1.gif);
background-repeat:no-repeat; background-position:left
bottom"> </td>
</tr>
</table></td>
</tr>
</table></td>
</tr>
<tr>
<td height="89" style="width:667px;
height:89px"><div
style="margin-left:396px" class="policy"> <br
style="line-height:8px">
Copyright 2006 © landscape design.<a
href="index-4.html"> All
rights reserved.</a> </div></td>
</tr>
</table></td>
<td style="width:48px; height:800px"></td>
</tr>
</table></td>
</tr>
</table>
</BODY>
</HTML>
chin chin
Sinclair -
Unable to see page icons in panel
I am having trouble viewing my pages within the pages panel. I am using InDesign CS4. When I open the file and click on the pages panel, it isn't expanding fully, and it takes me about 5 or 6 tries to get it to resize. Once I resize it, the page icons are way over to the far right, and every time I open the file, they keep moving over more to the right, until they just disappear off the screen. At this point I deleted my InDesign preferences, and reopened the file, but it just reset it to where the pages panel isn't fully expanded, and when I do expand it, the pages icons are way over to the right again. You can see in the image how the pages icons are way over to the right. They will keep moving more and more to the right until they will just dissappear. I have also tired restarting InDesign and the computer, but got the same results.
As I noted above, I did do that after the page icons had completely disappeared from the panel. After I deleted my preferences (by pressing shft+ctrl+alt when opening InDesign), I opened the file and it was set up as seen above in the screen shot. So the icons came back, but they are still floating to the right.
Maybe you are looking for
-
Multiple Default Values in a Multi-Select LOV Parameter?
Hi, I have a report in BI Publisher standalone version 10.1.3.4. The report has a list of values called org_lov. This lov is attached to a multi-selection p_org_code parameter from which it is desirable to also have multiple default values. For examp
-
Hi all, I am having a problem in TECO ing a service order. I have done the configuration required for the settlement rules to get generated. When I release the order and settle it the order is getting settled. But when I am trying to TECO the
-
Laptop use only 4GB RAM of physical 8GB in 64bit Windows 7
In my laptop HP630 had 4GB of RAM. I have installed additional 4GB. But the Bios shows 4GB of memory instead of 8, and Windows 7 x64 - also shows the memory capacity 4 GB (3.86 available). However, the program CPU-Z displays properly connected the ca
-
4************4 I called this number and someone told me I have lot of problems in my lab top. Also he got access to my computer.Now i want one of you to find out the problem in my lap top? <Edited by Host>
-
Error when replicate sales order from crm to r3
Hello Guys, When I replicate a sales orders from a CRM system to R3 system the system does the following error in the smw01: queue name: R3AD_SAL_ERR error1: Please enter sold-to party or ship-to party Nº mensagem VP112 error2: Sales document XXXX wa