Unable to see partition?
I stopped the partition in the middle. I rebooted and repaired the disk, it was okay. I am unable to see the partition but it takes space. How do I remove it? Please help...
Partition Advisor is part of SQL Access Advisor, so look for this advisor.
-Mughees
Similar Messages
-
In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..
One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
Clinton -
10.9 unable to see share folders on 10.6.8
I have a mac mini running 10.6.8 being accessed via 10.9 iMac and I am unable to see certain shared folders.
I was checking on the Mac Mini an some folders have an extra space at the end of the filename. I remove the extra space, and now, I am able to see it on 10.9 iMac. I also notice that filename that contains "/" have the same issue.
I check on another computer running 10.8.5 and I can see all the folders that are list on the mac mini running 10.6.8.
Is this a common issue with 10.9 that it can't read "/" and an extra space at the end of a filename? Or is anybody else experiencing this issue?Hey,
I have got a similar problem.
I use a NTFS-partition on OS X 10.9 and bootcamp.
I have had some folders on my shared NTFS harddisk with a "/" in the folders name. Example:"share/download".
Now all this folders disappeared and I can't see them anymore in OS. If I boot Windows via bootcamp, I can see the folders. The "/" is replaced with a ":", but the file location cannot be located and It is not possible to rename nor open nor anything.
For now all the data seems to be lost on OS and untouchable on windows...
I want my folders back!! -
I have an iMac for work and I am leaving the company. How do I clear the computer so that my soon to be former company is unable to see my personal information Ie. - internet, contacts, etc...
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
Unable to see interface on ASA 5510 Firewall
Hi All,
I am unable to see 4th interface on my firewall i.e fastether0/3 on my firewall ASA 5510.
Below is the output.
ciscoasa# sh int ip br
Interface IP-Address OK? Method Status Protocol
Ethernet0/0 x.x.x.x YES CONFIG up up
Ethernet0/1 x.x.x.x YES CONFIG up up
Ethernet0/2 unassigned YES unset administratively down down
Internal-Control0/0 127.0.1.1 YES unset up up
Internal-Data0/0 unassigned YES unset up up
Management0/0 192.168.1.1 YES CONFIG up up
Please suggest what could be the reason.
Regards
PankajHi Ramraj,
Even i have the base license for my ASA 5510 which is showing all the 4 interfaces in sh ver. I don't think so license would be an issue. There should be some IOS code bug that needs to be upgraded. If this goes for an OS upgrade it should get resolved.
Its not showing up in sh ver . As Karsten said he might be running on old IOS version.
fy-a# sh ver
Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 6.4(5)
Compiled on Thu 14-Jun-12 11:20 by builders
System image file is "disk0:/asa844-1-k8.bin"
Config file at boot was "startup-config"
fy-a up 1 day 1 hour
Hardware: ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW016 @ 0xfff00000, 2048KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
Number of accelerators: 1
0: Ext: Ethernet0/0 : address is 2c54.2d0c.8f1a, irq 9
1: Ext: Ethernet0/1 : address is 2c54.2d0c.8f1b, irq 9
2: Ext: Ethernet0/2 : address is 2c54.2d0c.8f1c, irq 9
3: Ext: Ethernet0/3 : address is 2c54.2d0c.8f1d, irq 9
4: Ext: Management0/0 : address is 2c54.2d0c.8f1e, irq 11
5: Int: Not used : irq 11
6: Int: Not used : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 50 perpetual
Inside Hosts : Unlimited perpetual
Failover : Disabled perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 0 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has a Base license.
Serial Number: JMX1AXXXXX
Running Permanent Activation Key: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Configuration register is 0x1
Configuration has not been modified since last system restart.
fy-a#
Ramraj please do correct me if am wrong.
Please do rate if the given information helps.
By
Karthik -
When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.
Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Unable to see pipe line steps in the SXMB_MONI
HI,
i have done the development and quality work for my p i7.1
i was testing the messages in the Quality System.
So i went to SXMB_MONI to see the messages.
After double clicking on the successfully processed message, it shows
pipe line steps.
in that I am able to see
1.inbound message(CENTRAL)
2.XML Validation inbound channel Request
3. call adapter
4. Response
but i am unable to see
1. Receiver Determination
2. Interface Determination
3. Receiver Grouping
4. Request Message Mapping
5. Technical Routing
whereas in the develoment system i am able to see the above all.
is there any configuration i have to do in the SXMB_ADM?can i know that Configuration objects were created/ imported by using transport mechanisum?
if created ,
check the cache status and re activated those objects whatever u r posted in thread.
if transported :
u ll follow ,whatever posted by Earlier -
Unable to see 'Search Dialog Box Component' option
In trying to follow Thilo Brandt's article to 'Develop a Serach Component for KM Search iView', but I'm unable to see Content Management -> User Interface -> Mapping -> Search Dialog Box Component. Is there something I need to 'turn on' so that I can view that option?
We are using EP6 SP2.
thanks,
Biju.Forgot to mention that the article is available at: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/developing a search component for km search iview.article
-
Airplay mirroring.
Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions.
Firewall set correctly (allow incoming...)
When I click mirroring to turn it on, teh Apple TV screen goes blank (from its home setting)
Any help appreciated.Hi!
I figured it out! It was a firewall issue.
I use Handsoff and I checked it before i wrote here. There was no "user defined rule" that denied the communication but when i changed to "All rules" the program displayed several rules regarding AppleTV and its IP.
So if anybody has the same problem make sure you see all rules of your firewall and get rid of the AppleTV related rules generated by the program itself. You dont need to update to the latest iOS on the AppleTV!
I hope that I can help some people with this info to fix the problem. -
Wired computers unable to see printer on Airport Express...help?
Hi all,
I recently set up an Airport Extreme on our office network to offer wireless network access piggybacked on our wired router. I then purchased an Airport Express which I was planning on using as a wireless print server for our Canon i9900 for all office computers connecting wired or wirelessly, which would interface with the network via the Airport Extreme Base Station.
I have configured the Express as an extension of the existing Airport network, and attached the printer to it via USB. All the computers in the office which have airport cards onboard can see and print from the printer, which is great. The problem is that all of the computers connecting to the network via wires are unable to see the printer (this is under both 10.3.x and 10.4.x, all airport software completely updated.) The Extreme base station shows up for all office computers in their Airport Admin Utility, AND if the printer is connected directly to the Extreme Base Station via USB, all computers can see the printer over Bonjour/Rendevous.
Anybody have ideas as to how I can get my wired machines to see the printer on the Airport Express?
Thanks!!Applications > Utilities > Airport Admin Utility
Scan and Select your Airport
Click Configure
On the Airport Tab
Base Station Options...
Check Enable Remote Printer Access
iFelix -
Unable to see the personalization link on any page
Hi,
I am unable to see the personalization link on any of my pages (not even on login page).
I am setting the profile option value to "Yes" for the profile option
FND: Personalization Region Link Enabled
Also I have bounced the Apache.
Please help me as I am stuck due to this.
Thanks,
AnoopDid you enabled the profile option Personalize Self-Service Defn (FND_CUSTOM_OA_DEFINTION) .It must be set to Yes.
Abhay -
Unable to see data in Table in smartform
Hi all,
I need to create a smartform where I have to print the header details at the start and then below that details for all line items for a particular document.
so i have data ;ike :
Header data :
field 1 : field 2:
Field3 : field4:
field5: field6:
Item data :
field1 field2 field3 field4 --> Item 1
field1 field2 field3 field4 -->Item 2
field 1 field2 field3 field4 -->Item3
For the Header data,Im planning to use a template in a secondary window.
However for the item data,i need to use a table (As i know the no of records only at runtime).Also another reason for usng table would be that I dont need the header on each flloowing page but only the Line item details on the following pages.
Now my ques is :
1.I hav ecreated the form and put some constant /texts to just test the form.I am able to see the texts/data in the header data.However Im unable to see the data for the Item i.e. in the TABLE.
I have used template for Header details which I can see.
I dont know what Im doing wrong.Is it because in the DATA tab under TABLES,I have given an interna table but there is no data in the table?
I have defined only 1 line type in my table an dthat has 4 cells (as I need to print 4 item fields under the Item data)
PLease let me know what I am doig wrong because of which Im unable to see the item data in table form.
Thanks!Hi,
Have you used any exists?
in exists is there any system date kind?
Can you try to run your report thru RSRT and use debug option there.
before reporting please check your all connected targets have data for reporting.
mean at targets-->request tab, reporting symbol was there or not.
Any master data objects included in multi provider?
if yes then please check those, if any ACR was running then it may cause you.
if possible try to develop simple query with as per needs(mean to see 2015 data only).
As my guess selections/filters migth be hidden, please check those.
Thanks -
Unable to see master data changes
I added a new field as an Attribute to Master Data (Customer Number) and loaded the data which was successfull. I created an infoset and created a report but am unable to see the values in this new field. I check 'Values in the Infoprovider' on the reports. Also when i go to RSISET and look for Infoset Values I do not see them there.
Hi,
I think there are two things you should check:
1. Have you seen the data for which you added into the attribute in your InfoObject?
2. Have you seen the field which you added into the attribute in your InfoSet?
If you got a "NO" answer, you maybe lose step(s).
Hope above helps you. -
Unable to see line items in segment clearing account
Friends,
Why we are unable to see the line items in intersegment clearing account/zero balance clearing account, eventhough the master is maintained as open item and line item display.Hi,
I have received the following error message.
Account 1999990, company code xxxx is clearing account
Message no. MSITEM111
Diagnosis
You have stored account 1999990 in company code xxxx as a clearing account. At the same time, you use line item management with this account.
System Response
Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
Procedure
Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account. -
Unable to see the values in detail block
Hello,
I have a master detail block, when I query the form, I am unable to see the values for a particular field(Column), all other columns appear properly in the details block, Upon checking the same table(s) in SQL ( by using the JOIN defined in the where clause of the relationship in Forms) , it shows the relevant records for all fields. So what could be wrong with the Form, please advise.
Thanks
FMIQ wrote:
I have just checked the field its a non-database field which is being used as a LOV column to display a value derived from LOV. How do I make this populate at Query time, as obviously this works when the Form is in a insert mode but not for Query mode. How to make it work for Query ? As it for LOV column and non-database filed, ignore my first suggestion.
Does your non-database filed has associate any column ?
For example, you have SUPPLIER_ID (database column) and SUPPLIER_NAME (non-database column). SUPPLIER_NAME has LOV column. And when selecting supplier name from LOV value also assign at supplier_id.
Now to show supplier name when querying, you have to write POST-CHANGE trigger at supplier_id. like
SELECT ASSC_CODE INTO :MST_SUPPLIER.ACC_CODE
FROM ACC_SUB_SUB_CONTROL
WHERE ASSC_ID=:MST_SUPPLIER.SUPP_ASSC_ID;Hope this helps
Maybe you are looking for
-
Many to many master detail form
Hi All, APEX 3.1.2 on SuSE 10 Oracle 10.2.0.3 64 bit I am new to APEX, but used OAS several years ago. Back then I hardcoded all htp.print commands. We are building an intra-team application to track system relationships. For example, web interface 3
-
I have a user request for a report in apps version of discoverer. They have a custom set of categories that they create on the fly in oracle 11i FSGs. Basically they have a level of the accounting category set that is no where in the database that th
-
We have these two tables and trying to see if the amount in one table is equal to the sum of the amount fields in another table. Can someone please help? SQL> desc test; Name Null? Type KEY NUMBER(9) AMOUNT NUMBER(11,2) SQL> desc test1; Name Null? Ty
-
How to call a webservice from JSP
I want to call a webservice from JSP? How can I do that .
-
Where is the page refresh icon in the new verion issued days ago?
The question is self explanatory.