Unable to see planned order in APO

Dear Experts,
I'm creating a Project manufacturing order in ERP. After that I do MRP run in SCM7.0. When I check in Product View (transaction /SAPAPO/RRP3), I do not see any planned order, though I can see orders in ERP (Tcode-md04).
I guess transfer of network to APO is not happening.
Same problem arises when I schedule a dummy project in ERP and after I do MRP run in SCM7.0, I do not see any planned order in planning board.
The MRP run in SCM7.0 shows no error and no warnings and everything appear in green.
I was able to see planned orders in APO before there was system upgrade from SCM 4.2 to SCM 7.0.
Please provide some clue to solve this problem.
Regards,
Jyoti

Hi Jyoti,
There will be an "Iterate" button on the left hand corner in the result display of CCR. Please click on this button so that these errors will get iterated and goes to the respective distinations. After this, you go to smq1 and smq2 trasnaction codes of R/3 and clear all the queues. Similarly you clear the queues in smq1 and smq2 transaction codes of APO. Afterwards, check whether you are able to see the planned order.
Please confirm
Regards
R. Senthil mareeswaran.

Similar Messages

How to see planned orders for P3 mrp type products in APO?

Dear experts,
I have materials with P3 MRP type (not planned in APO but in R/3 using MRP)
I have active integration models with P3 and X0 mrp type products for planned orders
however I can not see in APO product view the planned orders for P3 materials,
is this normal or should I see those planned orders in APO?
Thanks for your answer,
best regards
Elynn

Hi,
The following prerequisites must be met so that planned orders can be transferred from SAP R/3 to SAP APO
and vice versa:
1.The material masters must be transferred to SAP APO.
2. PPMs must exist for planning in SAP APO.
3. The relevant integration models must be active.
4. An active integration model for planned orders must exist in SAP R/3.
5.An active integration model must also exist for materials, so that the components of the planned order are transferred.
6.The relevant distribution definitions must be maintained in SAP APO, so that planning results can be
transferred from SAP APO to SAP R/3.
Thanks,
nandha

Correlation of reservation with Planned order in APO.

Hi,
In R/3 in COGI we see reservations. my issue is I want to know for which planned orders in APO these reservations are.
In the product view in APO we can see some reservations (PRDRES(W) - correct me if I am wrong). How to correlate these reservations with planned orders. I am looking in PP/DS module of APO.
Thanks a lot in advance,
Prabhat

Hi Prashant,
You are correct and if product is showing the reservation then it is mean for all order in product view.
You can check the Production Planning Table inside PPDS for wider view of reservation and orders.
/n/sapapo/ppt1
Check the SAP Note: SAP note 439596
SAP Link is also useful:
http://help.sap.com/saphelp_scm50/helpdata/en/64/dca63be2bc331be10000000a114084/content.htm
http://help.sap.com/saphelp_scm50/helpdata/en/c1/147a375f0dbc7fe10000009b38f8cf/frameset.htm
Let me know if it is sufficient.
Regards,
Vishal

How to delete Planned Order in APO

Hi,
How can I delete planned orders in APO? I already tried //RLCDELETE but it says "Order not in live cash" but I can see the order in //RRP3.
Let me know if you know another TCODE for this.
Thanks
David

Hello David -
Please use /SAPAPO/DELETE_PP_ORDER to delete planned orders.
thanks
Varun

Read the characteristics of a planned order in APO

how can we read the characteristics of a planned order in APO.What Function Module can be used for this?
how can we manually schedule the order activities based on the characteristics. Can we use the function module
/SAPAPO/OM_ACT_SCHEDULE by copying and making some changes in it for this purpose?

Hi,
if there are any orders in your system with characteristics (in planning version 000) then this report will find them:
report get_char.
data:
   ls_genp     type /sapapo/om_gen_params,
   lt_orderid type /sapapo/om_orderid_tab,
   lt_char     type /sapapo/om_charact_val_tab.
ls_genp-simversion = '000'.
call function '/SAPAPO/OM_ORDER_GET_ALL'
exporting
    is_gen_params = ls_genp
    iv_simsession = ''
importing
    et_orders     = lt_orderid.
call function '/SAPAPO/OM_ORDER_GET_DATA'
exporting
    is_gen_params       = ls_genp
    iv_simsession       = ''
    it_order            = lt_orderid
importing
    et_charact_val_acts = lt_char.
Best regards
Thomas

Unable to see planning application and dimension menus under navigate tab

Dears
Unable to see planning application and dimension menus under navigate tab in EPM 11.1.1.1 workspace.
Is there any configuration lost?
All EPM service have already started.
Thx
Hector

I also don't see the menu under "Consolidation" or "Planning" applications. I can naviaget to these applications from Navigate -> Application ->Consolidation or Planning and I see a box with up arrow and down arrow. If I keep my cursor between these two boxes, or the boundary, sometime I could start my applications in these two modules. I checked context.properties in \Hyperion\home\deployment\Tomcat5\workspace\webapps\workspace\conf folder.
#Appended properties
#Sat Jan 17 14:14:43 EST 2009
Reports=Y
HFM=Y
HPSU=Y
HP=Y
HPS=Y
Analyzer=Y
BPMA=Y
ChangeManagement=Y
Subcontext.properties file is as follows:
Analyzer=WebAnalysis
Reports=hr
HMB=metrics
HPS=HPSWebReports
HFM=hfm
HP=HyperionPlanning
BPMA=awb
HFM-version=9.3.1
HP-version=9.3.1
HPS-version=9.3.1
HMB-version=9.3.1
BPMA-version=9.3.1
# Parameters for all contexts
#KeepAliveInterval=10
#SessionTimeout=30
#logon=bpm.logon
#startup=cds.mode
I also removed # character in the last four lines but I cannot see my aplications under "Consolidation" or "Planning.
This is in Hyperion 9.3.1 environment all my websites are working. Workspace, Shared Services etc. I checked all my servies and they are working ok.
http://lewisxphub:19000/workspace/index.jsp
Any Ideas?
Thanks
Jay
Edited by: Keerthi on Jan 29, 2009 4:31 AM

Unable to view planned order from exceptional summary window

Hello All,
I have ran ASCP plan and it details out the exceptions and recommendations, but I am unable to view planned order from exceptional summary window>recommendations>cilck discrete jobs, no planned orders visible. This issue also shows up for other exceptions, on click of exceptions details it shows up the items but unable to take any actions.
I have tried by giving large no of days to view recommendations in preference.
Can someone help me to reslove issue.
Thanks,
Edited by: user604737 on Jul 18, 2011 6:09 AM

We don't have any query built on the exceptional window. As I am able to view below recommendations
Recommendations
Discrete Jobs 8
Purchase Req 27
When we click on discrete jobs/purchase req, its not showing any planned orders in supply window.
Can you please let me know, which is the backend table which stores supply information which are displayed in exceptional window.
Edited by: user604737 on Jul 18, 2011 9:15 AM

Unable to release planned order for single line from MRP workbench

Hi
We are unable to release planned order for single line from MRP Planner workbench,but Select All For Release is working for all the lines for the item
User want to release a specific line but no new requisition is generated
It is highly appreciable if anyone could help to resolve this issue
Appreciate the Help
Regards
VKPK

It sounds like the release goes through in the workbench but the requisition does not show up in source - is this correct? If so I would check item attributes / flags for purchasing and buy. also have found some items require a purchase price to be populated in master and org

How do I maintain storage location for Planned Orders in APO

Dear all,
Can you help us in maintaining storage location for planned orders in APO. The storage location from material master need to be updated in product master of APO and the same shall be automatically picked from product master during Supply Network Planning run.
Material master CIF is live.
We have got the following content error in CIF consistency check. How ever this is nt goging to harm any thing, but we would like to maintain in both R/3 and APO.
Error:
Plant and storage location in SAP APO: 2004
Plant and storage location in SAP R/3: 2004 FGPA
Thanks in advance
Ram Mohan Rao Kolanupaka

Instead of maintaining additional master data, i would rather use CCR user exits to switch off comparison of planned order at storage location level if the APO storage location is blank. This way you would not have to make changes to PPMs everytime a new scale out of the solution happens.
In SE18 check the user exit /SAPAPO/CIF_DELTA3 (interface RELEVANT_FOR_COMPARE_ORDHEAD)
If it is not possible to switch off this comparison then I guess changing master data is the next step. Do explore with a developer though about the first option.

How could I re-explode planned order in APO?

Please adivse me how could I re-explode planned order in APO?

Hi,
Go to the planned order in the change mode, again adopt the source of supply and save.
or you can use the PPDS heuristics "SAP_PP_021" New explosion to explode the orders.
Thanks,
nandha

Deletion of Planned Order in APO PP/DS

Hi All,
I have a question on PP/DS ( IS-Auto ). Suppose if we are deleting the planned orders in APO so what will happen to the concerned PDS. I want to preserve the PDS so that we can use them later.
If we delete the Planned Orders then will the PDS be also deleted ?
Thanks,
Prabhat

Prabhat,
Think of a PDS the same way you would think of a Production Version in ECC. It is master data, and one or more of these can be assigned to a Material/Plant combination.
http://help.sap.com/saphelp_scm70/helpdata/EN/4d/01be3d1abbe913e10000000a114084/frameset.htm
A Planned order is Transactional data. Creating/changing/deleting a Planned order has no impact on PDS Master data. During the creation of a planned order, the system reads the PDS info, and copies selected bits of this master data into the Planned order. At this point, then, certain parts of the planned order data can be changed. Such changes generally do not affect the underlying master data.
http://help.sap.com/saphelp_scm70/helpdata/EN/49/d565caf54535f5e10000000a42189c/frameset.htm
Best Regards,
DB49

Multi - item planned order in APO

Hi
In the MES multiple knife positions are possible in a single pattern. How to create a multi item planned order in APO based on the knife positions in the pattern? When the conversion indicator is set in APO the planend order need to be converted in to multi item production order in R/3. Please help how to configure the same in APO.
Thanks in advance.
Regards
Dhaiva

Hi,
Are you using this for trim interface ?
If yes, you need to use Template PDS/ppm for the same.
For more info, you can have a look at SAP note 919080.
Let me know if this info helps
cheers
Ram

I can't see planned order in Long Term Planning Stock/requirements list.

Hi
I am trying to use Long Term Planning in SAP.
I created scenario dates from 01.03.2011 to 03.09.2011. Between those dates i entered planned independent requirements as 300.
When i went to Long Term Planning Stock/requirements list, i can see all planned independent requirements but i run Multilevel single-item planning and then when i went to Long Term Planning Stock/requirements list again, i couldnt see planned order for planned independent requirements.
So what is the problem? Can anyone help me please?
Thank you.

HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM

How to find out manual deletion of planned orders in APO.

Planned orders are created on multiple bom levels when we call CTP from GATP for sales orders. For particular sales order there is no planned ordere at lower level. Dependent requirement is there which is uncovered.
I want to find somebody has deleted this planned order manually in apo. How to find out the same?
Regards,
Santosh

Hi Santosh,
If you suspect that the planned order was created but later on deleted manually, there is a cross check you can do to determine that.
In case of MATP, System uses the higher level Planned Order number to create the Dependent Demand at the lower level and only when this dependent demand is covered by a planned order it assigns the corresponding planned order number to it. So if you see the dependent demand number with same number as the higher level planned order for which it was created, you can be sure that a planned order was not created to cover the dependent demand that you see uncovered.
If the dependant demand number is not same as the planned order at higher level, then the planned order to cover the dependent demand was deleted.
I guess CTP also works the same way. If you're unsure about this, test it out.
Hope it helps.
Regards,
Mohan

Unable to see demand history in APO SPP via transaction /SAPAPO/SPPMDH

Hello
We are trying to view aggregated sales history data in APO SPP via transaction /SAPAPO/SPPMDH
We have loaded sales order data from flat file into DSO 9ARAWDAT & infocube 9ADEMAND. We can see the data in the cubes & also via the standard queries attached to 9ADEMAND cube.
Also we are able to adjust sales order item level data via transaction /SAPAPO/SPPMRD: Adjust Raw Data .
However we are unable to see any data when we try to adjust aggregated demand history via transaction /SAPAPO/SPPMDH.
The replenishment indicator is stocked & the forecast periodicity is maintained as well.
Could you please let us know if anything is missing? Thanks in advance

Santanu Paul wrote:
Hello
>
> We are trying to view aggregated sales history data in APO SPP via transaction /SAPAPO/SPPMDH
>
> We have loaded sales order data from flat file into DSO 9ARAWDAT & infocube 9ADEMAND. We can see the data in the cubes & also via the standard queries attached to 9ADEMAND cube.
>
> Also we are able to adjust sales order item level data via transaction /SAPAPO/SPPMRD: Adjust Raw Data .
>
> However we are unable to see any data when we try to adjust aggregated demand history via transaction /SAPAPO/SPPMDH.
>
> The replenishment indicator is stocked & the forecast periodicity is maintained as well.
>
> Could you please let us know if anything is missing? Thanks in advance
Hello,
Check this stuff (from help.sap.com) we had a quite similar issue, until we've fixed it:
For the demand categories we defined to be in your system, you have transferred the DataSources 9ADEM_CAT and 9ADEM_CAT_TXT as well as InfoSources 9ADEM_CAT and 9ADEM_CAT_TXT to the Business intelligence system (BI system) in SAP SCM and activated them. You have transferred the following InfoPackages for these InfoSources:
● Load Master Data from APO
● Load Texts for Demand Categories from APO
Note
Each time you change the relevant for forecast indicator of a demand category, you have to reactivate the master data of characteristic 9ADEM_CAT.

Unable to see planned order in APO

Similar Messages

Maybe you are looking for