Unable to see Planning applicaiton in workspace 11.1.1.1
Hi there:
I have created a planning application via classic app wizard (coz I can't see the classic app link in workspace). After created the app I was able to access directly via server:8300/HyperionPlanning but I was not able to see the application link under the navigation menu in workspace. I have check the contect.properties file in Tomcat directory and the hp is N and I changed it to Y but it is still not working. I checked the config utility under reporting and analysis but there's no option for web server configuration. Ther only 2 options that I have is FR server and Deployment to App server.
Am I missing a installation or assemblies for the web server/Apache install?
Thanks,
Mike
Hi,
You said "I have check the contect.properties file in Tomcat directory and the hp is N" and you changed it to Y, you shouldn't have had to manually change it, is it possible you can configure the "Configure web server" again.
You can test whether the apache plugin is working by going to http://<planning machine>:19000/HyperionPlanning/
or if you are using iis http://<planning machine>/HyperionPlanning/ and using the default port 80
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
Unable to see planning application and dimension menus under navigate tab
Dears
Unable to see planning application and dimension menus under navigate tab in EPM 11.1.1.1 workspace.
Is there any configuration lost?
All EPM service have already started.
Thx
HectorI also don't see the menu under "Consolidation" or "Planning" applications. I can naviaget to these applications from Navigate -> Application ->Consolidation or Planning and I see a box with up arrow and down arrow. If I keep my cursor between these two boxes, or the boundary, sometime I could start my applications in these two modules. I checked context.properties in \Hyperion\home\deployment\Tomcat5\workspace\webapps\workspace\conf folder.
#Appended properties
#Sat Jan 17 14:14:43 EST 2009
Reports=Y
HFM=Y
HPSU=Y
HP=Y
HPS=Y
Analyzer=Y
BPMA=Y
ChangeManagement=Y
Subcontext.properties file is as follows:
Analyzer=WebAnalysis
Reports=hr
HMB=metrics
HPS=HPSWebReports
HFM=hfm
HP=HyperionPlanning
BPMA=awb
HFM-version=9.3.1
HP-version=9.3.1
HPS-version=9.3.1
HMB-version=9.3.1
BPMA-version=9.3.1
# Parameters for all contexts
#KeepAliveInterval=10
#SessionTimeout=30
#logon=bpm.logon
#startup=cds.mode
I also removed # character in the last four lines but I cannot see my aplications under "Consolidation" or "Planning.
This is in Hyperion 9.3.1 environment all my websites are working. Workspace, Shared Services etc. I checked all my servies and they are working ok.
http://lewisxphub:19000/workspace/index.jsp
Any Ideas?
Thanks
Jay
Edited by: Keerthi on Jan 29, 2009 4:31 AM -
Unable to see Planning application under calculation Manager
Hello All,
I created a Planning application in workspace and choose the Sahred Service Project as APS server.Now I want to create business rules.For that when I m lunching Calculation Manager from workspace, I m not able to see the appliaction that I had created before ,under Planning option of Calculation Manager.
Thanks.......I think you created a classic planning applications. Calc manager will not recognize classic planning applications in version 11.1.1.2 and prior.
You need to create a planning applications via EPMA and then you will see this in calc manager. If you have already opened calc manager, right click on the Planning node and do a refresh to synchronize the applications from EPMA.
Hope this helps.
~SM -
LCM migration - Unable to see "Planning Dev Applications" Under "App group"
----- Situation ------
* We have hyperion 11.1.1.3.24
* Objective i- trying to perform a LCM file-migration from our DEV environment to UAT
* DEV has only one PMA enabled Planning Application (“budget”), few FR reports & other related artifacts.
----- So far --------
* Successfully Exported these 4 (Shared-services, EPMA, Planning & FR) from our DEV
* Successfully IMPORTED first 2 (Shared services, EPMA).
* Although the migration-Status shows failed in my case, noticed all the artifacts have been successfully Migrated. (Noticed Similar claims have reported in other posts as well.)
But, I am stuck on the Third Step, Planning Artifacts Imports. Since, I don’t see “Planning Dev Applications” Under “Application Group” (in shared-services console).
What Should I do. Any help would be greatly appreciated.
[do I have to create new Planning Application under the same name “Budget” in our UAT & start performing Import ? ]Yes, you are correct. Thank you. I guess, either I am having some issues OR I am not doing something correct.
So far -
Created a test Planning App in workspace & Deployed. I can see that Planning App under ==> Shared-Services/Default-Application-Group.
Still Checking -
Tried to create a New Application Group (Under shared Services / Application Group) in our UAT. However, only getting the following options though.
APS Servers
Business Rules
Default Application Group
Essbase Studio Server
Essbase:Database server
Foundation
Reporting Analysis
I need to create a New Planning Application Group (in our UAT). Still checking on how to create one. -
Unable to open Planning application through Workspace
Hi All,
I have Installed and configured the Hyperion products in the following Order
->Foundation services
->Essbase server
->Essbase Administration service
->Planning
->Reporting and Analysis
->Workspace
We know that workspace is a single user interface.
After configuring, I tried to open the Planning Application through workspace but I could not able to find "*Classic Application Administration*" under Administer option of Navigate menu Kindly guide me.
Thanks and Regards
chiDamYou don't need to start downloading weblogic.
Usually the issue is that either the web server has not been configured (this is not weblogic) or the permissions are not correct in shared services e.g. the hss roles of application creator, dimension editor.
You can always try going to create a planning application directly first http://<planningmachine>:8300/HyperionPlanning/AppWizard.jsp
Cheers
John
http://john-goodwin.blogspot.com/ -
Unable to See Planning App in EAS
Planning 11.1.1.3
New application created today. Native user in local Shared Services. Provisioned with all access to Planning. Created dimensions, created first form. Cannot see users to give access to form. New BR cannot see new Outline. Admin cannot see Planning cube in EAS at all. Cannot assign new owner to application. No users are seen by Application (registered) in Shared Services.
Other planning apps exist, and such objects are visible. Copied provisioning from one app to the new app. Synchronized security in EAS. Still invisible.If other application are working without any problem, can you not delete the planning application and try again, something may have gone wrong.
If not can you refresh planning? Can you provision any users against the application in Shared Services
Cheers
John
http://john-goodwin.blogspot.com/ -
Unable to see planned order in APO
Dear Experts,
I'm creating a Project manufacturing order in ERP. After that I do MRP run in SCM7.0. When I check in Product View (transaction /SAPAPO/RRP3), I do not see any planned order, though I can see orders in ERP (Tcode-md04).
I guess transfer of network to APO is not happening.
Same problem arises when I schedule a dummy project in ERP and after I do MRP run in SCM7.0, I do not see any planned order in planning board.
The MRP run in SCM7.0 shows no error and no warnings and everything appear in green.
I was able to see planned orders in APO before there was system upgrade from SCM 4.2 to SCM 7.0.
Please provide some clue to solve this problem.
Regards,
JyotiHi Jyoti,
There will be an "Iterate" button on the left hand corner in the result display of CCR. Please click on this button so that these errors will get iterated and goes to the respective distinations. After this, you go to smq1 and smq2 trasnaction codes of R/3 and clear all the queues. Similarly you clear the queues in smq1 and smq2 transaction codes of APO. Afterwards, check whether you are able to see the planned order.
Please confirm
Regards
R. Senthil mareeswaran. -
Unable to see Planning Classic Application Administration 11.1.1.3
Hi Gurus,
I successfully installed full suit of Hyperion 11.1.1.3
When I go to workspace I can see Classic Application Administration for Consolidation, but I cannot see Classic Application Administration for Planning.
I re-configured planning as well but same result.
I am able to open EPMA dimension library, essbase and all rest of the products.
Does anybody have an idea why is it happening.
Thanks..........Hi,
I got the solution. We need to re-configure web server under workspace and restart workspace & planning service. -
Unable to open Planning Classic from Workspace
Hi,
Version 9.3.1, Windows 2003
I configured classic planning; I can access Application directly from Planning URL but when i open workspace and
Navigate>administer>Classic Planning administration>Planning administration
I get error:
"Invalid or could not find module configuration"
"required application module Hyperion Planning.Planning is not configured. Please contact your administrator. "
please help.Hi John,
I reconfigured and see similar errors
details about errors
"Invalid or could not find module configuration"
"required application module Hyperion Planning.Planning is not configured. Please contact your administrator. "
communication error> details
http://amralbhypt02:19000/HyperionPlanning/conf/HspJSConfig.xml?LOCALE_LANGUAGE=en <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>........................
,............. -
Unable to see photo in PS workspace
I have PS CS4 extended (student version) installed on my laptop. It worked fine till a few days ago when I opened my computer and could not see photos in the PS workspace. Following is my usual workflow: I open PS then open Bridge where I locate the files I want to work on. I usually shoot in RAW (NEF for Nikon) therefore when I open my photo file, it opens up in Camera Raw (v 5.4). Once I've made modifications, I then open the image and it goes to Photoshop to either do more modifications or save it as a psd file. Everything worked fine! Then one day, when I did my usual routine, I couldn't see the photo file open in the workspace anymore. All I can see are the palettes on the right hand side and the tool bar on the left, the menu bar, application bar and options bar at the top. I know the photo file is open because the title bar has the file name on it, and in the layers palette, the background layer is open. The gray area where the photo usually appears is now black with no photo visible. I reinstalled the program with no better results.
Does anyone know what is happening and what I can do to remedy the situation? thanks for your help.Curt y, I did but it doesn't solve the problem.
XGod, I've been in contact with Adobe support directly and they got me to try article kb404897 (Troubleshoot system errors and freeze in CS4). This article is for Window Vista users (that's what I have), but the solution mentioned article didn't solve anything. The solution was to re-create the Photoshop preferences file. I was in contact with Adobe again this morning and they got me to try something else which was with the mode used (under the IMAGE menu tab). RGB and 16-bit were ticked. After changing to 8-bit, I opened the program again but it had changed back to 16-bit. I bet that is the problem! Now I can remember playing around with that!!! I don't know how to change it back to 8-bit as a default but will read up on it. I'll keep you posted. -
Unable to create planning application in workspace
Hi,
i am new to system 9,and have recently installed it on my system,when i try to create a new application using the link below:
http://localhost:8300/HypeironPlanning/Appwizard.jsp
I get the below error
user must have the planning Application creator and dimension editor roles to manage applications
Any help is appreciated.Hi,
You need to assign the user the Roles in Hyperion Shared Services,
When you provision a user > Hyperion Shared Services > Global Roles > Application Creator >
Cheers
John -
Unable to see the planning applications
Hi All,
I'm using hyperion 11.1.2. I've created a planning application in workspace. Now if i'm using the URL http://localhost:8300/HyperionPlanning, i'm unable to see any planning applications in the drop down ? where as i'm able to access applications in workspace. Do i need to make any settings to see the applications using this URL ? Pls. advice
Thanks,
PVRAs it looks like you only need the default cluster I would start up the configurator, select planning, manage planning clusters.
Choose "Re-Associate Cluster and Application", select default and choose an application, apply, repeat this for all the planning applications.
Choose Activate Cluster, select default.
Then you can delete the cluster that is not needed.
Cheers
John
http://john-goodwin.blogspot.com/ -
Unable to see Applications under navigate tab in Planning browser
Unable to see Applications under navigate tab in Hyperion(9.3.1) workspace I have installed all Hyperion 9.3.1 products as per installation document
Please Can any one tell me the solution.
i have one more question .already i installed Hyperion Shared Services,Essbase (includes
Essbase Server and Essbase Administration Services),Hyperion Planning - System 9 .Essbase Integration Services,Hyperion Smart View for Office.
i am using Tomcat web server only .
what are the applications need to install if i want to work on planningHi,
Have you read this post > Unable to see Applcation under navigate tab in Hyperion(9.3.1) workspace
I answered the same question on the subject only a few days ago.
Hope it works for you.
Cheers
John -
Unable to see the application in BPM Workspace for Sales Quote tutorial
I have created the Sales Quote tutorial steps and deployed the process. The Enter Quote Details user task is in the "SalesRep" role and I have assigned a user from WebLogic user store to "SalesRep" role in the BPM Organization artifact.
In order to kick off the process, I logged-in to BPM workspace with the user I have assigned as "SalesRep" role but don't find the Sales Quote application under the "Applications" tab.
I am using 11g PS4(11.1.1.5) and didn't seed the demo users, instead just created the user using WLS console.
Any thoughts why the user is unable to see the application in BPM Workspace?
Thanks,
SatyaCheck two things:
1. Login to Workspace as weblogic and click the Administration link at the top to verify the role is actually set to a user (just to double check this).
2. Login to EM, click the SalesQuote composite, scroll down and click the EnterQuote human task component, and click the Administration tab.
This shows you if there is a task form URI associated with this human task. If not, the initiate link won't show up in the Applications menu in Workspace.
If not, you can either deploy again from JDeveloper, making sure you have selected the task forms in the deploy wizard and making sure the deployment is successful in the Deployments log window.
Heidi. -
Unable to see the deployed application in BPM Workspace
Hi Every body,
We have developed the Project using Jdeveloper and it has deployed successfully. After that I login in Workspace with assigned user, I could't find the deployed application.
In Enterprise Manager I checked it shows it has deployed and I checked in in workspace login as a weblogic user and seen the assigned role,it has assigned currectly but I am unable to see the deployed application in BPM workspace. Can any body help on this.
Thanks in advance.Hi
Try this. Log into the Workspace using weblogic user. Go to the Administration option (up and right if I'm not wrong) and check if the roles that you create for the process has the users correctly assigned.
Regards,
isabelbernely
Maybe you are looking for
-
Why can I no longer Save As a Word document?
I work in Pages, but whenever I need to send a document to someone I convert it to Word since most people seem to use MS Word. It's never been a problem, until today. I go to Save As... under the File menu and try to save a document titled "XYZ" as a
-
Installation of ODAC 11g on Windows XP service pack3
Am trying to install ODT with ODAC1110720, but when the install has progressed to about 40% it gives the following error: unhandled win32 exception occured in javaw.exe[2672]. The value in the brackets change. This error occurs when the Oracle univer
-
Firefox 11 Crashing Regularly on OS X Snow Leopard
After upgrading to FF 11, the browser crashes regularly. It usually happens on pages with some sort of flash on it, whether it be a video page or even a page with flash ads. I have tried turning off the hardware option in flash. I tried turning any v
-
Is there a Multi-Language Dictionary ad-on for the Adobe Reader for Windows 8?
Is there a Multi-Language Dictionary ad-on for the Adobe Reader for Windows 8
-
TS2446 i forget my secureity question and answer how to do now ?
hi I forget my answering for secureity qustion ! how do it now could you help me and prvoid me Thank you