Unable to see R/3 FM from Crystal Reports

Hi All,
I have created a Function Module in R/3 (Remote-Enabled) and trying to access from the Crystal reports to design a report. But I am not able to see that function Module under "SAP Tables, Clusters and Functions"-> FN. Is there anything I am missing out on either FM side or Crystal Connectivity? Please help.
regards
hemanth

Hi,
Thanks you for your respose. I think I am nearing the solution to my issue. As per your response, the input value has a I_ prefix but the problem is how do I create the POP-UP to input the value of the Company Code? It doesnt pop up automatically!!! as it happens in R/3. Please do suggest the solution.
regards
Hemanth

Similar Messages

Unable to connect to defined CMS from Crystal reports Enetrprise

Hi all,
I am using SAP Crystal Reports for Enterprise XI 4.0 (SP2 Patch 6). We have 2 independent Intelligence & Processing Tiers installed with their own CMS services. However, temporarily we are using only 1 common WAS Netweaver 7.3 for both CMS (when we connect to CMC/BI Launch pad we juts type different CMS name). Both of them are on same patch level, etc.
My problem is that when I try to connect to BO Enterprise (BI 4.0) from Crystal reports, I am unable to specify to which CMS it has to connect - since it take the Server name and not the CMS name. It automatically connects me to only 1 of the CMS while there is no chance to connect to another (it might have somewhere recorded the CMS name). is there a chance to choose between those 2 CMS to which Crystal should connect?
Thanks!
Erik.

Erik,
You should specify the name of the server where BOE is installed. You can use the FQDN or even the IP address and the port name.
Regards,
Julian

See sql query from crystal report without crystal report

see sql query from crystal report without crystal report

Hi,
Depends on datasource type but you could have a look at ODBC trace or if you have access to the SQL Server you could use profiler to monitor the session.
Regards,
Craig
And this will only be of use if you know which Server/Insstance/Database the Report is connecting to...
Please click "Mark As Answer" if my post helped. Tony C.

When I try to use 'Stacked Column Bar'. with data assigned in the graphs, and want to see it in the 'Preview' mode in Xeclsius, I unable to see the graphs apart from the Axes ans Series Value, the graphs becomes totaly invisible why So ?

When I try to use 'Stacked Column Bar'. with data assigned in the graphs, and want to see it in the 'Preview' mode in Xeclsius, I unable to see the graphs apart from the Axes ans Series Value, the graphs becomes totally invisible why So ?

Hi Ranendra,
For basic understanding of Dashboards and Models you can use standard Templates or samples which ll come along with dashboard designer(Formly Xcelsius) installation.
For path File-->Templates(or Samples).
Under Templates you ll have different categories and for each you ll find the dashboard Templates.
Regards,
Venkat P

CR2008 Not enough memory while exporting reports from Crystal Reports 2008

I have recently upgraded our Crystal Reports version from Crystal Reports Basic for Visual Studio 2008 to Crystal Reports 2008. After upgradation I am facing the problem "Memory full.OtherErrorFailed to export the report. Not enough memory for operation" when I am trying to export the report from Crystal Reports 2008 Report viewer, or directly from the code behind. The application is hosted application. The problem occurs in our production environment.
Server details:
OS: Windows 2003 Enterprise Edition R2 with SP2
IIS: IIS 6
.Net Framework: 3.5
Application details:
Hosted application using Crystal Reports 2008 SP 3
Crystal Reports Viewer version: 12.0.2000.0
The data binding of the report object is done through an ADODB dataset.
Web.Config:
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<configSections>
    <sectionGroup name="businessObjects">
      <sectionGroup name="crystalReports">
        <section name="printControl" type="System.Configuration.NameValueSectionHandler" />
        <section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler" />
      </sectionGroup>
    </sectionGroup>
</configSections>
<businessObjects>
    <crystalReports>
      <printControl>
        <add key="url" value="http://myserver/mysite/PrintControl.cab" />
      </printControl>
      <crystalReportViewer>
        <add key="documentView" value="weblayout" />
      </crystalReportViewer>
    </crystalReports>
</businessObjects>
<appSettings>
    <add key="CrystalImageCleaner-AutoStart" value="true" />
    <add key="CrystalImageCleaner-Sleep" value="60000" />
    <add key="CrystalImageCleaner-Age" value="120000" />
</appSettings>
<system.web>
    <httpHandlers>
      <add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
    </httpHandlers>
    <compilation debug="false">
      <assemblies>
        <add assembly="CrystalDecisions.Data.AdoDotNetInterop, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
        <add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
      </assemblies>
</system.web>
<system.webServer>
     <handlers>
         <add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode" />
     </handlers>
</system.webServer>
</configuration>
Sample Code:
Report = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
Report.Load(Server.MapPath(strReportPath));
Report.SetDataSource(dsReport);
Creportviewer.ReportSource = Report;
For exporting the report to PDF
string Filename = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.InternetCache).ToString(), Guid.NewGuid().ToString() + ".pdf");
Report.ExportToDisk(ExportFormatType.PortableDocFormat, Filename);
Clean Up Code: (Page_UnLoad event)
if (Report != null)
     Report.Close();
     Report.Dispose();
Creportviewer.ReportSource = null;
Creportviewer.Dispose();
dsReport = null;
GC.Collect();
GC.WaitForPendingFinalizers();
Can someone help me resolve the issue.

The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save. Presumably the 12MB file size is because of the 24bit PNG we have as our background.
The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full". If we export only page 1 of the 3 pages, it also returns a Memory full error. However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything). The process runs up to about 1GB before reporting the memory full error.
We've also tried a variety of other suggestions posted in the other thread with no success.
We're happy to provide the RPT file to the Report Team to diagnose the problem. Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
Our preferred scenario is fixing problem 2. The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size. However, the API reports memory full.
The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing. When executing, it uses up to about 1.1GB before reporting the error.
Are there any other suggestions for fixing what we have? Are there known problems with large images in reports? Do we need to lodge a formal support request?
Regards, Grant.
PS. Grr and my message formatting is lost when I edited this message!!!
There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
Edited by: grantph on Sep 30, 2009 2:49 AM

Passing single/multiple values to stored proc parameter from crystal report

I tried below solution posted on this forum to pass either a single value or multi-value to a sql server stored procedure parameter (varchar datatype) from crystal report XI R2.
In my crystal report , I am displaying all the available parameter values to the user and the user will select either a single value or multi value.
This worked when I select single value and when I say show sql query in my subreport I see the following:
{CALL "XYZ"."dbo"."storedprocedurename";1('Product 1')}
But this did not worked when I selected multiple values and when I say show sql query in my subreport I see the following:
{CALL "XYZ"."dbo"."storedprocedurename";1('Product 1,Product 2')}
I think it might work if it is as below:*
For multiple values:
{CALL "xyz"."dbo"."storedprocedurename";1('Product 1', 'Product 2')}
Please advise.
Solution Posted on this forum is as follows:
Hi,
As you must be aware of that a crystal report created of a stored procedure will allow only a single value for inserting a multiple value as a parameter in your report and pass those values to your stored procedure please follow the below work around which will be helpful for you.
Symptom
In Crystal Reports, you want to pass a multi-value parameter to a stored procedure. The problem with doing so is that Crystal Reports considers the multi-value parameter to be an array.
How can you pass a multi-value parameter to a stored procedure?
Resolution
Here are the steps to pass a multi-value parameter to a stored procedure:
1. Create a Crystal report, and add a multi-value parameter.
2. Since the multi-value parameter is treated as an array, create a formula that uses the JOIN function. Create a formula as below:
//Formula: @JoinFormula
Join ({?Multi-value parameter array},";")
====================
NOTE:
In the formula above, a semi-colon (";") is the delimiter.
====================
3. Within the main report, create a subreport based on the stored procedure, and include the parameter to be populated with the multi-value list.
4. Link the Join formula in the main report to the stored procedure parameter in the subreport.
Doing so passes a multi-value parameter to the stored procedure.
Regards,
Vinay

Hi Vinay,
First you need to make sure the stored procedure accepts multiple values in the fashion 'a','b','c'.
Then, create this formula in the Main Report:
numbervar i;
stringvar s;
for i:= 1 to ubound({?Parameter}) do
s := s + "'" + {?Parameter}<i> + "'" + ",";
left(s,len(s)-1);
Link this formula to the sub-report's parameter.
Hope this helps!
-Abhilash

JNDI error while generating pdf from crystal reports in java

Hi, i want to generate PDF from crystal reports in java. I have the .PDF file with database configured into the report. Following details are available in report.
1. Server Name      = testdb
2. Database Name = testdb
3. User
4. Password
I am using CR XI.
In CRConfig.xml i had given following details.
<JDBC>
     <CacheRowSetSize>100</CacheRowSetSize>
     <JDBCURL>jdbc:oracle:thin:@192.218.216.102:1521://TESTDB</JDBCURL>
     <JDBCClassName>oracle.jdbc.driver.OracleDriver</JDBCClassName>
     <JDBCUserName>user</JDBCUserName>
     <JNDIURL>password</JNDIURL>
     <JNDIConnectionFactory></JNDIConnectionFactory>
     <JNDIInitContext>/</JNDIInitContext>
     <JNDIUserName>testdb</JNDIUserName>
     <GenericJDBCDriver>
          <Default>
               <ServerType>UNKNOWN</ServerType>
               <QuoteIdentifierOnOff>ON</QuoteIdentifierOnOff>
               <StoredProcType>Standard</StoredProcType>
               <LogonStyle>Standard</LogonStyle>
          </Default>
     </GenericJDBCDriver>
</JDBC>
When i am calling from java as standalone, i am getting following error.
JRCAgent1 detected an exception: Error finding JNDI name (testdb)
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)      at com.businessobjects.reports.sdk.b.i.if(Unknown Source)
Can anyone let me know where is the problem?

Actually, the question boils down to; does the framework support the fonts?
I believe that my question re. this working in the designer was valid. The designer does not use the framework, so if it works there, it is either a framework issue or a runtime print engine issue.
I believe if you use the code below, it will list fonts available to the framework:
foreach(FontFamily ff in FontFamily.Families)
System.Diagnostics.Debug.WriteLine(ff.Name);
For more information see kbase [1198306 - Crystal Report displaying incorrect font in Microsoft Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393338333333303336%7D.do]
Ludek

Migrating from crystal report 8.5 to 10.0 giving error 01S00:error

migrating from crystal report 8.5 to 10.0 giving error
I am working in migrating my cr application to 10th ver from the existing 8.5 where we have to explicitly make a query in query builder and then attach it. I was using dsn in ms odbc for oracle driver to connect the DB. Now in 10.0 i have removed the query file created using 8.5 query builder and trying to write directly to command editor. the report as stand alone is working fine. but when i try to generate the pdf using my vb application then on .export option it is giving error as "Logon failed.
Details: 01S00:[Microsoft][ODBC driver for Oracle]Invalid connection string attribute". i think the problem might be with cddb_oracle.dll or crdb_oracle.dll file as i am using a evaluation version of crystal report 10. as input to dsn i am providing
1.dsn
2.usid
3.database
4.password
what else is missing . plz help.....

Well, you can migrate, you can not upgrade (semantics I suppose). E.g.; the RDC was deprecated in CR XI r1 and retired in CR 2008. Thus there is no way for you to upgrade to version 12 of the RDC as there is no such thing. So, from here, you have two options: migrate / port the app to .NET, or Java SDKs.
Re. RDC, see my blog here:
/people/ludek.uher/blog/2008/10/20/report-designer-component--past-present-future
For porting the app to .NET, see this article:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0eb394f-931e-2b10-3b82-9413bfc3f457
Ludek

How to generate Bar codes from Crystal Report

I understand that Bar Codes can be genrated from Crystal reports. I am using CR 2008 and trying to convert my Inventory items to bar codes. it does convert it and I can see the bar codes but it looks like; just a garbage and scanner does not recognze it plus the numners are missing @ the bottom.
Anybody has ever tried this and have some simple instructions to start with.
Any help will be appreciated highly.
Regards,

Hi,
What barcode are you using and what barcode font?
If you are using Code39 or Postnet then you need to make sure your values are formatted properly by creating a formula and using the barcode functions.
Have a search in the forum for barcodes. It's been talked about a lot and you should find your solution.
Good luck,
Brian

How can i export excel 2003(Version 11) from Crystal Report 8.5

how can i export report to excel 2003(Version 11) from Crystal Report 8.5

We i can only see below formats
Acrobat Format (PDF)
Character-separated values
Comma-separated values (CSV)
Crystal Reports (RPT)
Crystal Reports 7.0 (RPT)
Data Interchange Format (DIF)
Excel 5.0 (XLS)
Excel 5.0 (XLS) (Extended)
Excel 7.0 (XLS)
Excel 7.0 (XLS) (Extended)
Excel 8.0 (XLS)
Excel 8.0 (XLS) (Extended)
HTML 3.2
HTML 4.0 (DHTML)
Lotus 1-2-3 (WK1)
Lotus 1-2-3 (WK3)
Lotus 1-2-3 (WK5)
ODBC - AddressBook
OBDC - CRGUP
OBDC - CROR8V36
OBDC - CRSS
OBDC - CRXMLV36
ODBC - dBASE Files
ODBC - Excel Files
ODBC - MS Access Database
ODBC - Visio Database Samples
ODBC - Visual FoxPro Database
ODBC - Visual FoxPro Tables
OBDC - Xtreme Sample Database
Paginated Text
Record style (columns no spaces)
Record style (columns with spaces)
Report Definition
Rich Text (Exact Format)
Tab-separated text
Tab-separated values
Text
Word for Windows document
XML
there is no format with "Microsoft Excel 97-2000 (XLS)"
what should i do?

OBIEE metadata from Crystal reports

Hello,
I am trying to connect to the OBIEE metadata from Crystal Reports using an ODBC connection. I am able to see the column definitions but the data is not shown - anyone have any suggestions on getting this to work?

At least one of the 3rd-party Crystal report Desktop Scheduling tools listed at: http://www.kenhamady.com/bookmarks.html
provides this functionality. It even allows you to dynamically control the password via a field/formula inside the Crystal report. It can also take care of the emailing part. You can call and request the processing from your own application (via a command line API).

Passing Value from Crystal Report (special function) to Business View parameter

Friends,
Í have a scenario where i need to pass value from Crystal Report to a Business view's parameter.
Eg : CurrentCEUsername (func in crystal report)-- gives login user which i should pass to parameter in a Business view (used in the same report).
Will be able to explain more if required.
Thanks in Advance,
Bharath

I guess you got the picture wrong. User_id is not a report_level parameter .
In Data Foundation, below query is used..
select Acc_Number, Account_Group,User_id from Accounts where user_id={?User_id}
where in {?User_id} is the BV parameter...
The Filter was a solution. But it takes long time to Query all the data from DB and then filter at BV level.
How do i pass the CurrentCEUsername to {?User_id}
Value should ve CurrentCEusername always. so that query will be
select Acc_Number, Account_Group,User_id from Accounts where user_id=CurrentCEusername
It will restrict the data pulled from DB to BV .. right?

How to print directly to Printer from Crystal Report Viewer ?

Hi All,
We are integrating our Java Web Application with Crystal report XI, currently using JRC and export to PDF for user to preview and print to local printer.
Now there is new requirement :
Some clients is using thin client terminal (no harddisk, only has OS +Browser in ROM), so I cannot install Acrobat Reader for them to preview&print the report.
So I am looking at Crystal Report Viewer, the question is : Can I print from Crystal Report Viewer directly to local printer without first converting it to PDF (because I can't have acrobat reader installed) ??
Thank you very much,
Krist
Indonesia

Hi,
It can't be achieved through XI.
JRCXI R2 SDK offers the ability to print the report server side
using the PrintOutputController using printReport(PrintReportOptions printReportOptions) method.
Here is the code(for XIR2):
import="com.crystaldecisions.reports.sdk.*"
import="com.crystaldecisions.sdk.occa.report.lib.*"
import="com.crystaldecisions.sdk.occa.report.document.*"
try {
final String REPORT_NAME = "Inventory.rpt";
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(REPORT_NAME, 0);
//Create and set print options.
PrintReportOptions printOptions = new PrintReportOptions();
//Note: Printer with the 'printer name' below must already be configured.
printOptions.setPrinterName("
10.10.45.220
BOBJ 2C");
printOptions.setJobTitle("Sample Print Job from JRC.");
printOptions.setPrinterDuplex(PrinterDuplex.horizontal);
printOptions.setPaperSource(PaperSource.auto);
printOptions.setPaperSize(PaperSize.paperLetter);
printOptions.setNumberOfCopies(1);
printOptions.setCollated(false);
PrintReportOptions.PageRange printPageRange = new PrintReportOptions.PageRange(1,1);
printOptions.addPrinterPageRange(printPageRange);
//NOTE: If parameters or database login credentials are required, they need to be set before.
//calling the printReport() method of the PrintOutputController.
reportClientDoc.getPrintOutputController().printReport(printOptions);
reportClientDoc.close();
out.println("Successfully sent report to the printer.");
catch(ReportSDKException ex) {
out.println(ex);
Please revert in case you have any query.
Thanks,
Neeraj

How to get actual error from Crystal Report

We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in Advance

Same as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek

Error when exporting to other format from crystal report

Hi,
I have been facing an error "Method 'IRCREditableRTFExportFormatOptions_reserved5' on type 'CrystalDecisions.ReportAppServer.ReportDefModel.EditableRTFExportFormatOptionsClass' from assembly 'CrystalDecisions.ReportAppServer.ReportDefModel, Version = 11.0.3300.0, Culture-neutral, PublicKeyToken=692fbea5521e1304' is overriding a method that has been overriden." while trying to export the crystal report to another format (e.g. pdf and excel) from an application from a software vendor.
For your information, the machine OS that is running the application is Window 7. Before I did the installation of the application, it already has Visual Studio 2005 and Crystal Report XI Release 1 installed in the Window 7 system. After I had the above error, I went to search more information on the website and found out that I need to upgrade to Crystal Report XI Release 2 from the search results. However, after I upgraded from Crystal Report XI Release 1 to Crystal Report XI Release 2 and apply service pack 6, I still faced the same error when I tried to export. I even tried to uninstall Visual Studio 2005 and Crystal Report XI Release 2 but I'm still facing the same above error while exporting. I also tried to reinstall the application from software vendor but the same error come out.
Your help is highly appreciated. Thanks!!
Regards,
Jennifer

Good morning Jennifer
When you say:
" I also tried to reinstall the application from software vendor but the same error come out."
I wonder if the app you are trying to install is from a 3rd party vendor / developer? If it is, installing CR XI r2 (11.5) will not resolve the issue for you. From the error, the app was compiled with CR XI R1 (11.0) and the only way to get that app to use CR XI r2 will be to recompile it with CR XI r2 assemblies. E.g.; you will have to have access to the source code and then recompile the app, ensuring that you are referencing CR XI r2 assemblies. Or am I missing something here?
Ludek

Unable to see R/3 FM from Crystal Reports

Similar Messages

Maybe you are looking for