Unable to see shared library using fast user switching?

I couldn't get iPhoto 5.04 sharing to work between two users on a single machine. The documentation and this thread say it should work:
lori_diloreto, "How can you share a iPhoto library with another account user" #1, 09:03am May 10, 2005 CDT
but it didn't. Personal file sharing is enabled. iPhoto Bonjour sharing is enabled on the firewall. I can share iTunes libraries between the two users.
So I restarted the machine and tried again. It worked.
I don't know why the restart was necessary ...
BTW, I'd recommend more than my 512MB of DRAM when doing this. I'm amazed the G5 works as well as it does with so little physical memory. Tiger's disk swapping must be superb -- but I think at least 1GB would be adviseable.

Hi jfaughnan,
Rebooting can cure a lot of little quirks. If all else fails when I try to do something and it's not working, I reboot and see if it helps. Usually it does.

Similar Messages

  • OS 10.4.6. has broken dialup connectivity when using fast user switching

    I installed OS 10.4.6. It seems to have broken dialup connectivity when using fast user switching when switching from one user to the next.
    For dialup, it is extreamly annoying that I can not resume downloading a file from were it got cut off, but now, if another user wants to check their email, my download always gets broken and has to be restarted. Dialup is slow enough with out having to start from scratch even more frequently, now.
    Also, in earlier versions of 10.2 or 10.3 (I don't remember which), I was able to switch users and maintain listening to a single users' iTunes.
    I would like to be able to switch users and not lose either my dialup network connection or the primary users currently playing iTunes songs.
    Perhaps for iTunes, one should be able to chose to mute another users' instance of iTunes, if it is currently playing.
    Mini-Mac 1.42GHz 80GB BT/AE   Mac OS X (10.4.6)  

    I have not tried replicating this but might be able to provide some additional information.
    We use network login accounts on our desktop computers. Fast User switching deliberately will not work for multiple network login accounts. (Remember network login accounts normally also have an associated network home directory mounted via AFP.)
    Now a bit of background about volumes and mount points under Mac OS X. Under Mac OS X, any additional drive (or more accurately 'volume') is listed under the 'Volumes' folder, remember also that Mac OS X is a Unix operating system. So just as normal for Unix, the boot drive is '/' or the root level and Volumes is a folder in it. The underlying Mac OS X software automatically 'attaches' and additional volumes as sub-folders in the 'Volumes' folder (in Unix speak these are called 'Mount Points'), if you have an external hard-disc called 'Fred' then this would be represented by the following path
    /Volumes/Fred
    If you happen to have two volumes with the same name connected at the same time then while in the Finder they may show up with the same name, in Unix they would have different names automatically assigned to keep them separate like so
    /Volumes/Fred
    /Volumes/Fred 1
    Now getting back to the Fast User switching problem and AFP volumes, when you login to a File Server volume it also is automatically added to the Volumes folder, so if we have a File Server volume called 'Shared' it would look like
    /Volumes/Shared
    With Fast User switching potentially both user accounts could be accessing the same /Volumes/Shared which means both user accounts would be talking to the server via the same File Server login, hence the possibility for one of the Fast User accounts to be using the 'wrong' permissions.

  • Sharing one iTunes Library with Fast User Switching

    Last year, I started using one MacBook Pro for Office use and Personal Home use, by creating two user accounts on it, and enabling Fast User Switching. I did this when I gave up using two separate desktops macs.
    Now I have two rather similar music libraries, taking up too much hard drive space. Once I enabled Music Sharing in my Office iTunes Library, I realized that I could gain access to that Office Music Library when I am on my Personal Home User account. Since my Library on my Office account is the most complete, can I eliminate the iTunes Library on my Personal Home User account, to save hard drive space?
    If so, how should I do this?
    MBPro17, Pbk17 G4 1.67, Pbk G4 12 1.5, iMac G4, various G4&G5's   Mac OS X (10.4.8)   Airport Extreme & Express

    Glen
    Since my Library on my Office account is the most
    complete, can I eliminate the iTunes Library on my
    Personal Home User account, to save hard drive
    space?
    Yes.
    If so, how should I do this?
    Move the iTunes folder in Home/Music on the Personal
    Home User Account to the desktop.
    Launch iTunes. Unable to locate a library file, it
    will create a new one, empty one in a new iTunes
    folder at Home/Music.
    Connect to your shared library as usual. If
    everything is working as expected, trash the iTunes
    folder on your desktop.
    Regards
    TD
    My iTunes was created under an admin. user profile that I would like to delete. I created a second profile also with admin privlages but I want to delete the first because I messed up the shortname on the profile. So, if I delete this first profile, will I lose all of my music? Will I lose access to the music?

  • Can no longer simultaneously stream an mp3 in Safari when using fast user switching option.

    After updating to ios 5, I can no longer stream an mp3 in Safari when I use the fast user switching option.  For instance, if you are listening to streaming content in a Safari tab and want to reference another app as soon as you switch from the Safari stream pauses.
    This was not the case with previous versions of ios.  Any ideas on a work around to restore this functionality to keep Safarr streaming content in the background?

    User switching problems is the very first thing I noticed with SL. I have a host of other problems with SL but this is one of the most frustrating. The user switching did not work on 10.6 very well either but was wicked fast in 10.5.x
    Apple rewrote the Kernel so this type of thing is expected, still the test crew missed this very noticable problem. Hopefully 10.6.2 has a fix.

  • Unable to see shared library

    I searched for and read about a dozen previous posts on this subject but was unable to find a solution. Not only can I not see any shared library but I don't even have a "shared" menu item on either PC as described in the help file. It should show up under the Library>Music heading?
    Both PC's:
    ...can connect to the internet
    ...can transfer files back and forth
    ...can see each others "Shared Docs" directory
    ...have iTunes and Bonjour listed as exceptions in Windows Firewall
    ...have the latest verions of iTunes and Bonjour
    When I point the iTunes Music Folder location on the 'remote' PC to the iTunes Music Folder on the 'host' PC, it finds it, see's it, and then asks if I want to update (the view)? to match? I said yes. Still the same list of songs that are physically on the remote PC and nowhere does it say anything about sharing or give any indication that it is aware of the host library.
    What am I not getting?

    "iTunes Sharing, the built-in feature, has nothing to do with pointing your iTunes Music folder setting to a shared folder on another computer. Those are two separate features/capabilities."
    Yes, I get that - I was just trying everything I could think of to make it see my shared library.
    "do you have Sharing and "Look for shared" turned on in the iTunes Sharing preferences?"
    Yes.
    "you want to have your iTunes library using the shared folder on your other computer, you need to use the Add Folder to Library command to get the tracks into the iTunes library listing"
    Not quite sure what your getting at here. The help file for sharing the entire library gives 3 simple steps and then says "its name appears in the iTunes window (below Shared) on other local computers (in the same subnet) set up to look for shared libraries." - obviously this is not happening.
    The whole reason to share and use the host library is specifically to avoid having to manually add tracks/folders from the remote PC.

  • Unable to see shared library (still)

    I tried to continue an old thread that I had started on this topic but it has been archived - http://discussions.apple.com/message.jspa?messageID=9317333#9317333
    Anyway, all I want to do is access my iTunes music from another computer on the network. I was never able to do it in the 8.x version and I still can't do it with version 9, even with both PC's having the new "Home Sharing" feature turned on.
    I have iTunes on its own (logical) drive, which is shared using "Network sharing and security" dialog box under drive properties. "Share the folder on the network" and "Allow network users to change my files" are both checked.
    Under the (Windows XP) firewall settings I have the following exceptions checked on both PC's:
    Bonjour, port 5297 and 5298, iTunes and port 3689.
    Both computers can see each other across the network and are able to view and transfer files both ways. iTunes on the remote PC can see all shared folders on the host PC including of course the entire iTunes drive and folder structure. I can set my "iTunes Media folder location" to the iTunes folder on the host PC, and it will show the path as \\folder++folder\music which is correct.
    I have never been able to get iTunes on the remote PC to show a shared folder available and the host always shows sharing status as "On, no users connected". I tried bypassing the (Lynksys, Etherfast Cable/DSL) Router [wired] but still no change. Why is this so hard??
    Any ideas greatly appreciated...

    Going through every post I can find that is relevant to home networking here on the forum again...
    Tried holding down the shift key while opening iTunes and selecting the library on the host PC, it still shows only the local library on the remote when it opens? I don't get it.
    From the remote tried "Add new folder to library" and pointed to the host folder, still get all the songs on the local (remote) PC only.
    Checked Norton A/V and Network security settings and it shows iTunes as active connection, an exception in firewall, etc. - just to be sure, I completely disabled both Windows firewall and Norton, still no joy.
    Ran network diagnostics on both PC's and they both show everything working.
    Please help me!
    Message was edited by: diddlefoo

  • Shared Disk - can't connect with Fast User Switching

    Hi,
    I've created a Disk on my Time Capsule, and shared it via "File Sharing", it's secured "with a disk password", and is working well ... sort of. I can connect to it with no issues, and so can my wife via her MacBook Pro. However, if I'm signed into my account, and she accesses her account using Fast User Switching, she can't connect to the shared volume. She has to Disconnect, and then reauthenticate, and after doing so, I can't connect to the shared volume. I must Disconnect, and reconnect. Why is this? Is there an authentication file that's set up some where on the root of the shared computer, that's preventing us from being able to signin to the shared volume? Or is something broken?
    Thanks!

    Complete uninstallation and reinstallation of network adapter drivers has been reported to resolve this error in some cases. Open
    Device Manager and select Show Hidden Devices from the
    View menu. Expand the Network Adapters category and delete all drivers under this category. After the devices are removed right click and select
    Scan for hardware changes.
    Brandon
    Windows Outreach Team- IT Pro
    Windows for IT Pros on TechNet

  • Fast user switching and "ipod is in use by another user on this computer"

    Is there any way to suppress the "ipod is in use by another user on this computer" message that appears when you use fast user switching.
    my wife and I share a mac pro and when flipping between sessions, this message gets to be a bit annoying. i.e. if her itouch is plugged in and she is managing it through her library, if I fast user switch to my session, I get the warning dialog (ok to clear) I mention above. This is kind of annoying now, since I understand I won't be able to manage that ipod from my itunes session.
    is there anyway to suppress this behavior?

    Hi again,
    Glad to hear you got all your music files back into your library.
    I've seen this iPod error before, but I don't know why it occurs. In my experience, restarting the computer solves the problem.
    Cheers,
    Sara.

  • How does fast user switching know which energy settings to use?

    When using fast user switching and keeping 2 accounts logged in, which accounts' energy settings take priority (assuming their settings don't match)? For example, let's say I set my account's display to sleep after 15 minutes and my wife sets hers for 30 minutes. If we both keep our accounts logged in and then leave the Mac on the login screen, who wins?
    The reason I ask is because my display won't stay asleep. Unlike my example above, I've made sure both accounts have identical energy settings (sleep the display after 15 minutes & the iMac itself is set to 'never sleep'). I can get it to sleep (usually by pressing control-shift-eject), but it will not stay asleep. I don't think any applications are causing this (I've shut down all apps to test - only Time Machine is scheduled to run automatically). I'm starting to wonder if fast user switching could be the cause? I usually keep both accounts logged in at all times and return to the login screen before heading to bed. I then force the display to sleep with control-shift-eject, but several hours later I wake up to a bright room because the display has turned on again. I haven't tried turning off fast user switching yet, but I can see where that might confuse the OS?
    Oh, I've also disabled waking on bluetooth activity just in case my wireless mighty mouse was losing its connection & waking the display upon reconnection - no luck.
    Any thoughts or suggestions are appreciated - it's driving me nuts, especially since I can't just turn off the iMac display itself without powering down the entire system.

    Energy Saver settings are system-wide and not specific to the user. If one user changes the settings, it's changed for everyone. Screensaver settings are user-specific.
    That said, the reason that the system wakes by itself can be one of several things: the system is set to wake up (you can set this under energy saver) by preferences or some application/service, the system receives a wake-up message from something on the network (you can configure this under Security, I believe, or Network, I don't recall), or you have "chatter" related to a device plugged into your computer.
    "chatter" is when a USB device or FireWire device sends a signal to the computer it's connected to. Normally, peripherals are quiet if not actively in use, but some things (cheap USB hubs, certain mice, etc) will spuriously send a signal to the connected computer and cause it to wake.

  • Network drive and fast user switching OS 10.7

    I have a shared network drive that I want all accounts on my Mac to be able to access. On my Mac I have a single admin account and several non-admin accounts. The problem is that once one account mounts the network drive when another user logs in (using fast user switching) the drive shows as being inaccessible (a folder icon with a "do not enter" icon on it) and must be unmounted and remounted. This is an issue because unmounting requires the admin password which is not known to all users.
    Is there a way that I can make the mount available to all users on the machine without needing to remount for each user? Or is there a way that I can unmount without requiring the admin account?
    Thanks

    System Preferences -> Users & Groups, click Login Options, you'll see it then.  You'll need to unlock that preference pane with the lock in the lower left corner of the window to change that setting.

  • Cannot login to secondary accounts; can't fast user switch

    I am on a Macbook, 2 GB RAM, 120 GB hard drive, 10.4.8. Today, I developed a strange problem with logging in. I have auto login set so I log in automatically to my main account, which (thank God) works. However, if I access Fast User Switching to switch to a secondary account I have set up, called Test, the transition starts (the cube rotates) , switching to a solid blue screen...and never goes any further. I cannot seem to find any way to bring up the login screen on startup, either; I must allow my main account to boot up, and then try to switch accounts. If I turn off auto-login, I get the login screen, but login to the other account still fails.
    If I select, instead, the Login Window from the Fast User Switching menu, I get that screen. But when I select an account other than my main account, and try to log in, I get that blank blue screen. I've waited many minutes to see if something will eventually happen, but no go. The only way to get control of my Macbook back is to hold down the power button until it shuts down.
    I have run Tech Tool diagnostics and have repaired permissions (no errors found). I deleted my Test account, and redefined it; I also defined a second test account, one with admin privs and one without. No problem creating the accounts. However, when I try to log in to those accounts, the computer hangs on the blue screen.
    I'm not sure when this problem began because I have not been using my Test account for a couple of weeks. A lot has changed since then.
    Any suggestions, anyone?

    More info: I turned off auto-login, and was able to log in to my test account. Then, I was able to use fast user switching to switch to my main account. I will try again restarting into my main account and see if I can switch to Test. This failed consistently before I posted here. Perhaps the "sense Mac guru" circuit kicked in and cured the problem. I'm about ready to turn in so won't post a follow-up until tomorrow. Right now, I need to use my two accounts to get the job done (a writing job with screen shots of a new unaltered account). Then, I'll go back to trying to see if the problem still exists when I log in to the main account first.

  • Screen has a bluish tint after fast user switching and then warning tone

    Hi all I'm having a bit of a problem that I hope someone can help me with. First the details, I have a MBP bought in late '07 and running Tiger. I was doing full backups using "Backup" and I also had Safari, iTunes, and Word open. I briefly switched to my other account using fast user switching and when I returned to the original account the whole screen had a blue tint to it. Like the color profile was off. This has happened before and a restart usually cures it, I haven't restarted yet but I am fairly certain it will correct the problem this time too. But is there anyway to prevent this? My second question is the one I'm more worried about. It also has happened before but usually when using more CPU intensive applications. When I went to System Preferences and opened up the display preferences in an attempt to correct the previous problem I heard a very loud tone. Like some type of warning tone, it was loud enough that it startled me. I had iTunes playing and after the tone the music got very quiet but relaunching it brought it back to normal. I'm just wondering is this some type of warning tone? Is it something I should be concerned about? Besides the music everything else seemed unaffected, although the previous times that this has happened usually when using handbrake there was noticeable problems after the tone (like applications crashing). All of these problems are gone after the computer is restarted though. Does anyone have any insight on these issues? Thank you.
    -James

    OK I ran TechTool and everything passed except for the volume scan. Then I checked this with Disk Utility and the HD failed for a few minor reasons, like invalid block count. I repaired it using the fsck -fy command in single user mode. The computer seems a little faster now. I don't know if this error is related to the beep in any way, I may try talking to an Apple genius to see if they know. Since it seems like pretty minor errors I'm not too worried about it but it does seem to be happening often. The last time I had this error was when I posted a question here about it which I just checked was on March 1st. So this error happened again after a little more than 2 weeks which seems excessive to me. Any thoughts?

  • How to get "fast user switching" and network shares playing nice

    I've been alternating between banging my head against a wall and reading every forum I could find to try and get a reasonable compromise between using "Fast user switching" and sharing a folder from a file server.  It baffles me how the network share/mount model of OSX/AFP is completely killed by fast-user-switching; this is a big problem with Apple requiring users to be actively logged in to share music/video from iTunes which therefore essentially requires fast-user-switching if anyone else wants to use the computer.  (anyone find it odd that you can share files without being logged in, but sharing songs requires an active login for each user who is sharing?  Apple: time to make iTunes sharing a service!)
    For the sake of example, lets just say I want to share my /Groups folder from my desktop and have it be accessible to my laptop.  Here are all the things that I tried:
    Apple Method 1) Share /Groups in the Server.app on the desktop (running Lion Server), use finder on the laptop and drag the share icon to "Login Items", alternative use a startup Apple script using "mount volume"  Both of the options work and will mount the /Groups folder under /Volumes/Groups, of course when the second person logs in via fast-user-switching (and occasionally the first person for no apparent reason), they will get /Volumes/Groups-1 since /Volumes/Groups is already taken.  Tomorrow we log in a different order and now the previously /Volumes/Groups-1 user has their mount at /Volumes/Group and vice versa.  Any links, aliases, finder sidebar references, and application settings which pointed to yesterday's location are now BROKEN.  Not very user friendly to my mother-in-law who is trying to find those pictures of the kids and doesn't know anything about mount points. I also can't reasonably mirror the file location structure on the desktop so that application preferences that are synced between the two (portable home directories) work.   fail.
    Apple Method 2) Use automounter and set up by hand direct maps for /Groups or an indirect maps for the children of /Groups.  Now it will automatically get mounted to /network/servers/SERVER/Groups/ on the laptop and on the desktop it will automatically create a similar symlink structure so that the same path (/network/servers/SERVER/Groups) work both on desktop and laptop.  Cool.  Except when the second person logs in, the /network/servers/SERVER/Groups/ mountpoint is already owned by the first user and they don't have any permissions to access it.  Fail.
    Apple Method 3) Use mount_afs and specify directly the mount-points.  Have each user have their own startup AppleScript which mounts /Groups to a different location (e.g. /Users/Shared/username/Groups) that way they don't conflict with multiple users.  On the desktop, set up symlinks from /Users/Shared/username/Group to /Groups so that it will be the same as the client and applications settings will work when synchronized back/forth by portable-home-directories.  Will it work, yes it does, but what a bear to maintain.  Is this really what I should expect to do just to have multiple users on my desktop and laptop (which again is essentially required now if I want to do any type of iTunes sharing).  This can't be what apple expects.
    What I ended up doing - the "not quite apple" solution.
    Non-Apple Method 4) After a read of "Autofs: Automatically Mounting Network File Shares in Mac OS X" (http://images.apple.com/business/docs/Autofs.pdf) at the very end there is a single paragraph  of "Kerberized NFS": "A Kerberized NFS mount can have multiple connections from multiple users, each using the correct user’s credentials for each transaction. This allows administrators to support multiple users, each authenticated with their own credentials to the same mount point. This is very different from AFP and SMB mounts," (emphasis mine)
    It appears that by using good 'ole NFS (abeint with Kerberos for security!) you can actually have multiple users on the same mount point.  Roughly following the guidance at https://support.apple.com/kb/TA24986?viewlocale=en_US.  What I needed to do was:
    1) create /etc/exports on my desktop and add a single line "/Groups -sec=krb5".  The existence of /etc/exports triggered a start of nfsd which no longer has any GUI options in Lion.
    2) Add a line to /etc/auto_master on my laptop "/-  auto_mymounts" to reference a new direct map.
    3) Create /etc/auto_mymounts and add a single line "/Groups         SERVER:/Groups" to create the direct map.
    THAT'S IT.  Three lines in three files.
    Now when I log into my laptop, there is a /Groups that is a network mount of my desktop's /Groups, same location AND it works for all of my users, even simultaneously. 
    In the end I'm happy with what I've got, but man was this a difficult path just to support fast-user-switching.  In Lion, Apple appears to be getting away from NFS (no longer turned on by default and remove from the GUI controls) but clearly this really useful functionality which doesn't exist in AFP. 
    I'm really curious, after all this work.  Any other ways to accomplish this?

    In my example above, yes I chose to mount the share "Groups" to the top of the root since that is where I put it on my server and I wanted to keep them similar; but that was just my preference, it isn't a requirement.  You can export and mount from other directories.

  • Issues with Fast User Switching, language pref, greyed out menu options

    I have only one user logged in to my Macbook. If i want to select the other user using Fast User Switching and clicking on the username in top right corner of screen, nothing happens. The other user at this time is still logged out.
    Incidentally, when i click on the airport symbol, the wireless networks are often greyed out and i can't change networks unless in go into network prefs.
    One more thing - i have english and spanish selected as languages in international preferences. I ca not switch back to english at all - by clicking on the flag in the menu bar or by going into sys prefs. When n battery power, power characteristics are also greyed out and unable to select a different profile.
    any help welcome.
    thanks

    It sounds like everything in your menu bar is florfed.
    Can you log in to the other user account from the login window instead of by fast user switching? If so, does that account have the same problems with the menu bar?

  • IPod/iTunes issue with Fast User Switching

    I have Fast User Switching enabled on my iMac Core 2 Duo running 10.4.8. My daughter usually leaves her iPod connected and it is causing problems when switching to another user. Other users get the message that the connected iPod is associated with another iTunes Music Library and constantly asks if it should be erased. While nothing has happened yet, there are 4 of us using this and I think it's only a ametter of time before somebody inadvertantly blows away her iPod.
    Is there any way to disable this this?

    Let me try to elicit a more helpful response...
    One of the problems I am encountering with an iPod connected and using fast user switching is that if the iPod is syncing with one user, and I switch to another user, the second user sometimes will try to take control of the iPod and sync with the second user's library.
    Is there a way to tell Mac User's 2 account to ignore User 1's iPod?

Maybe you are looking for