Unable to see some Roles in Query designer

Hi all,
I have created a role in PFCG having some queries and assigned that role to my user id.
When i log into Query designer i m unable to see that role and all other roles i am able to see.
What could be the reason for this?
Did i missed to assign any authorizations?
Thanks,
Jaya.

Hi Anoop,
The variable is probably being used to restrict a key figure.
Go to the key figures,
Display the technical names
Check the key figures for which the technical name is not appearing even though the key figure is not a formula.
Here you will see one of the key figure being restricted by a variable for 0calday
Hope this helps.
Regards,
Joe
Didnt notice the question is answered :P
Edited by: lazarus_joey on Feb 17, 2012 6:48 PM

Similar Messages

Unable to see the variable in Query Designer

Hello Experts,
I am running one report and it is showing me 0calday variable selection screen at run time. I am unable to see this Variable on my Query designer but when I am opening query properties its showing me in this.
Kindly let me know where is this Variable using in my query designer ?
Thanks,
Anoop

Hi Anoop,
The variable is probably being used to restrict a key figure.
Go to the key figures,
Display the technical names
Check the key figures for which the technical name is not appearing even though the key figure is not a formula.
Here you will see one of the key figure being restricted by a variable for 0calday
Hope this helps.
Regards,
Joe
Didnt notice the question is answered :P
Edited by: lazarus_joey on Feb 17, 2012 6:48 PM

Unable to Create Instance of Essbase Query Designer

followed by Unable to Initialize Query Designer.Essbase v6.1Excel 97 sp2 iWin NT 4 sp5We are running into this error when trying to launch query designer."Unable to Create Instance of Essbase Query Designer"Query designer is checked in the addins before we try running it. We receive the messages. If we check the addins after we get the messages, query designer is unchecked.The Essbase addin works fine with no issues. Any thoughts on what this might be or how to troubleshoot it?Thanks.Mike

Update: is it possible that security rights to the Essbase directory would affect the Query Designer? On a machine that it works on, I've noticed that the "xla" file updates each time it is accessed.

Can't see good variables in Query Designer BW 7.0

Hello,
The technical name of our caracteristic variables in the Query Designer are prefixed by "OR_" or "SV_". I try to make a filter in this variables (for example: a user must be able to see only "SV_" variable) with the authorization objects S_RS_COMP and S_RS_COMP1. But this filter does not work, even if the ST01 trace shows me a Return Code = 4 for the test in the variable technical name.
Have I made something wrong ? is it a bug ? (we are in BW 7.0 SPS9 with Sapgui 6.40 SP 19 and BEx SP 12).
Thank you for your help

Hi Paul,
If iam not worng, are you asking about Infoobject level security in BW?
If it is, the following are the steps need to be implemented:
<u><b>Steps to Implement InfoObject Security (field-level security)</b></u>
1) Make the InfoObject authorization-relevant.
The Authorization Relevant setting for an InfoObject made in the InfoObject definition on the Business Explorer tab. The business needs will drive which InfoObjects should be relevant for security. Keep in mind that the people using SAP BWare running queries to help make strategic decisions on how to better run the business. The decision makers typically need to see more data on SAP BW than they would need to see in SAP R/3.
2) Create a custom reporting authorization object.
Since there are no reporting authorization objects provided for InfoObjects, you will have to create your own reporting authorization object for any InfoObject you decide to secure. This is done in transaction code RSSM. When creating your reporting authorization object, you select which fields to put in the authorization object from a list of authorization-relevant InfoObjects. Only InfoObjects that have been marked Authorization Relevant are eligible to be put in a reporting authorization object.
3) Add your new authorization object to a role.
Once you have created an new reporting authorization object and linked it to the appropriate InfoCube(s), users will need access to your reporting authorization object. You will need to manually insert your object into a role.
4) Add a variable to the query.
The reason the variable is required is sometimes unclear at first. If we want a query to only provide results based on the division, for example, then the query itself needs the ability to filter specific division values. Before we can secure on division, the query must be able to restrict data by division. The only way the query can restrict data dynamically is through a variable.
5) Link the reporting authorization object to an InfoProvider.
Linking your reporting authorization object to an InfoProvider is a very critical step. In this step, you will impact people currently executing queries for the InfoProvider that is now related to your reporting authorization object. This linkage forces your reporting authorization object to be checked when ANY query tied to the InfoProvider is executed.
Hope it helps, please revert back if you are asking for something else.
Please reward points if it is sueful.
Thanks & Regards,
Santosh

Transaction for overview of Queries published in Roles via Query designer

Hi Guru's,
in Query designer I have the possibility to publish Queries in roles.
I have the problem that some Queries have been published twice or more in different folders, so I want to clean it. But I don't know how to delete the Queries via BEx Analyzer as they are there again as soon as I log in again.
Isn't there any transaction in Backend that I can use to structure my Queries in roles?
Thanks in advance!

One way to delete unneeded duplicates....
Go to Query designer, in development
Instead of loading the query you want to delete, find it in the folder/role
Click on the "Trash Can" icon
Then we have 2 more options to consider....
- Delete object ...will TOTALLY delete it in the development system.... caution with this one, unless you really do want it to permanently go-away.
- Delete only the object reference from the Role/Favorites... will delete the one instance in the folder, but leaves it everywhere else, useful when deleting a duplicate report in the folder
After choosing one of the 2 options above, then click on the 'continue' button.
"Refresh" to check what was done in development = Menu / Refresh
When done... transport the role to Q and Production.
Similar process if the query is located inside of web template and there are multiple instances of the same web template in the roles/folders that need to be cleaned up in the web application designer.

Unable to see some navigations for one responsibility

Hello there,
We have recently upgraded to OIE.K and Fin_PF.G..after that for one of the responsibility we have some problem with the navigation.
General ledger responsibility...uses a menu called GL_SU_SETUP....Under that only...GL_SU_S_ACCOUNT, GL_SU_S_JOURNAL, GL_SU_S_GIS are available from front end.
If we go to Application---> Menu....in that for GL_SU_SETUP...I can able to see all the munus/functions associated to that.
Only at front-end we are unable to see those navigations.
Anybody can help me on this.
Thanks,
Bhaskar Mudunuri.
Edited by: Bhaskar Mudunuri on 18-Jun-2009 09:05

Hussein & Seal,
The issue for the above issue is....
at the responsibility level....Some one excluded all those functions/menus.
Sorry for wasting your valuable time for this simple issue.
Thanks & Regards,
Bhaskar Mudunuri

Unable to write a formula in query designer

Hi Experts,
while writing a formula in query designer in development system there is an error.
Formula is:
Grand total =1
when i write in the rows it is throwing the sytax error like " General syntax error in formula"
But the same formula has been written in production( this query is not available in development so that i am designing the same query in the development system).
some one give me an idea.
Thanks

Hi,
As i checked with implementation team and they have written the formula it has been assigned like Grand Total = 1.
i.e. Grand Total assign to 1.(But it is not Grand Total == 1).
Thanks for your support.
Thx
Edited by: satya prasad on Apr 27, 2010 7:44 AM

Unable to see Publisher roles in obiee 11g

Hi All,
I have installed OBIEE 11g (11.6). In Admin tool for the user weblogic I am unable to see the publisher roles XMLP_SCHEDULER, XMLP_ADMIN, XMLP_DEVELOPER etc.. But I am able to access publisher.
Only able to see BI Administrator, BI Author, BI Consumer BI System.
In OBIEE 10g, I am able to see all the roles for Administrator user once I installed.
Thanks.

user1668671 wrote:
Hi Amit,
XMLP roles doesnot exist in Enterprise manager's Security > Application roles. How should I get them. Shouldnt I get default with the installation..???
Thanks.Have you installed BI Publisher along with OBIEE ? If yes, then the roles should have been created in the enterprise manager by default. Since you dont see them, I believe you will have to manually create all the application policies and then application roles and assocaite them. You either find them in the documnetation on what to create etc or you can try installing .5 version of OBIEE to replicate the same in .6.

Unable to find my InfoArea in Query Designer

Hi all,
Iu2019ve created an InfoObjectCatalog, InfoArea, DSO and an InfoCube. The data source, transformation,DTPs are all active and the flat file is loaded into the cube. I've the data also in the cube. I want to create a query out this cube that I created. But when I open query designer and look for my info area, I donu2019t find it. I searched for Info Area in Find but it says u2018No objects foundu2019. I can't find any of the objects i.e. either the cube or the Info Area.
My question is why canu2019t find any of the objects that I created inspite of all the objects being active? How do I locate my objects in Query Designer that I created in BI backend?
Please advise.
Thank you.
TR.

Hi,
You need to create the Query first to Find the Info Area (relevant to that Query)
You can search the Info Area Manually (if you dont have Query also) provided You need to say New at Query designer Standard Menu.
Hope it helps

Unable to see new role in environment

An end user said that a role that was working last week is no longer available in the portal. No changes have been made to the system in the past week.
A co-worker successfully imported this new role into the portal a week ago, but the change did not synchronize to all the servers in the environment. We have one Central Instance and two Web Application Servers in our Java environment. The import was successfully completed on WAS1. I verified this by checking the PCD import log files on WAS1. When I log into the portal running on WAS1 the new role is available. When I log into the portal running on the Central Instance the role is NOT available.
To resolve the issue a logged into the portal running on the Central Instance and used System Administration >Transport Packages> IMPORT to import the *.epa file containing this role.
Is there something else I should have done to resolve this use? How does a the system synchronize changes to objects in the java environment?

Hi,
when doing a depoly of an application (PAR) or EPA, you basically just copy the file to a (shared) folder on your java instance. This change get's recognized by your instance.
If it's a PAR, the instance informs all the other instances in your cluster of the change. They all access the application and do a local deploy / installation of the change.
If it's an EPA (PCD objects), the instance reads the content and writes it to the DB and informs the other instances that a DB change has occured and they should read the DB again to sync their content.
Normally, the deploy;import works without problems in a server, but can produce from time to time some errors / sync issues. Depending on the cache, an instance simply won't read the DB. You can use a tool from SAP that checks the instance and DB for sync issues (the tool is called something like: PCDcheckDB.sh).
Generally, you should clear the cache of your portal after every deploy/transport to ensure that the user is getting the latest version:
- Navigation cache
- portal DB cache
- PCD cache
- (HTTP provider cache, web dispatcher cache)
Depending on you configuration (cluster with many servers and nodes), you see this issue several times, you can do the following:
- Shut your DI down and do the deploy on your CI.
- Restart your DI with the sync option. This way, they will sync the content of the DB and disregard the local cache.
br,
Tobias

Unable to Restrict Navigational Attribute in Query Designer

Hi BI Experts,
I had a Requirement to restrict on navigational attribute.......
i have checked in every levels such that
1.at info object level ....checked type as navigational
2.at info cube level checked the navigational on.
still iam unable to restrict on navigational attribute................in the context menu its giving the options cut, remove and where used list .........its not giving option to restrict...........
its very urgent ...........please give any suggestions how to restrict on navigational attr

Dear Ram,
Dont expand the InfoObject and see the Attributes ( They r Dis Attrs )
Just expand the Dimension --- Nav Attrs are available ?
Dont put them in Filter pane..( if available )
Drop them under Rows.
But restrict them under Default values ( By clicking on Filter pane ).
Regards,
Ram.

Unable to see some SDK Compenents in desing studio 1.2 sp02

Hi,
i installed sdk components by using ecllipse but when i try to drag into aplication to use locally , i got a error , by the way, i used desing studio 1.2 sp02
anybody help me for solution?
you can see the screenshot in the attachment.
thanks in advance,

I can also confirm that this is an issue, specifically with what appears to be with 1.2 SP2.
When I turn log settings to Debug, and look at JavaScript console output, I'm getting this error stack:
A JavaScript error occurred. Unable to get property 'zenMessageControl' of undefined or null reference TypeError: Unable to get property 'zenMessageControl' of undefined or null reference at insertIntoAbsoluteLayoutContainer (http://localhost:8080/aad/zen.rt.framework/resources/js/dispatcher.js?version=oqThLihzC5Zl5gi2NVJ4Jw%3D%3D&nocache=:896:3) at Anonymous function (http://localhost:8080/aad/zen.rt.components/resources/js/absolutelayout_handler.js?version=Doz9qX5m%2FkTGqQqj4CMiCA%3D%3D&nocache=:65:5) at createAndAdd (http://localhost:8080/aad/zen.rt.framework/resources/js/dispatcher.js?version=oqThLihzC5Zl5gi2NVJ4Jw%3D%3D&nocache=:1185:4) at createControl (http://localhost:8080/aad/zen.rt.framework/resources/js/dispatcher.js?version=oqThLihzC5Zl5gi2NVJ4Jw%3D%3D&nocache=:333:5) at dispatchCreateControl (http://localhost:8080/aad/zen.rt.framework/resources/js/dispatcher.js?version=oqThLihzC5Zl5gi2NVJ4Jw%3D%3D&nocache=:265:3) at updateChildren (http://localhost:8080/aad/zen.rt.framework/resources/js/dispatcher.js?version=oqThLihzC5Zl5gi2NVJ4Jw%3D%3D&nocache=:1230:5) at init (http://localhost:8080/aad/zen.rt.components/resources/js/absolutelayout_handler.js?version=Doz9qX5m%2FkTGqQqj4CMiCA%3D%3D&nocache=:64:4) at updateComponent (http://localhost:8080/aad/zen.rt.components/resources/js/absolutelayout_handler.js?version=Doz9qX5m%2FkTGqQqj4CMiCA%3D%3D&nocache=:88:4) at dispatchUpdateControl (http://localhost:8080/aad/zen.rt.framework/resources/js/dispatcher.js?version=oqThLihzC5Zl5gi2NVJ4Jw%3D%3D&nocache=:391:5) at dispatchDelta (http://localhost:8080/aad/zen.rt.framework/resources/js/dispatcher.js?version=oqThLihzC5Zl5gi2NVJ4Jw%3D%3D&nocache=:109:5)
It seems situational. I'll try to figure out when it breaks and when it doesn't.

Unable to see some pictures

A few weeks from now I've having trouble opening pictures in my library that I used to see before. This pictures were taken with a camera different than mine. Can somebody help me resolve this issue?
Thank you

MrAddy wrote:
It is Vista Home Prem, with service pack 2 Sorry.Try again to reset ALL Internet Explorer settings: http://support.microsoft.com/kb/923737 Next reset LAN settings: Open Internet Explorer. Go to Tools -> Internet Options -> Connections -> LAN settings. Make sure that the only option selected is “Automatically detect settings”. Next clear all Temporary Internet Files: Open Internet Explorer -> Tools -> Internet Options -> General. In the section “Browsing history” press the “Settings” button and in the next window the “View files” button. Delete all files from the Temporary Internet Files folder. What do you see now when you open this link in your Internet Explorer? https://api.asm.skype.com/s/i See also this similar case:http://community.skype.com/t5/Windows-desktop-client/quot-This-photo-is-unavailable-quot-message/m-p/4026949#M352853

Infoareas do not at Query Designer and Analyzer

Dear frieds,
We are do not see the infoareas at Query designer and analyzer ( BW Quality ), in DEV is all right, what's happening ?
OBS: The user autority is equal in all clients.
Thanks.
Fabrício

Hi,
Are you not able to see any of the info areas or only some specific infoareas?
Regards
Akhan

How to assign current date/time to a formula variable in Query Designer

How do I assign the current date to a formula variable in Query Designer? I need to use current data in a calculation and just need the date the report was run.
Thanks

Hi Philip,
There is an SAP formula variable to supply the current date in a formula. I think it is 0F_ADAY...install it from business content if you cannot see it in the query designer (formula box, under formula variables) and try using it.
Hope this helps...

Unable to see some Roles in Query designer

Similar Messages

Maybe you are looking for