Unable to see text instead of account name in the hierarchy

Dear all,
I m new to SAP BI,
I have a Fianancial Statement Item in which hierarchy and text is loaded. Now when the report is executed I want the to display the coresponding text, that is loaded with the hierarchy, with the account name. How do i do that.

Place your cursor on any of the account field, then right click --> select "properties". You will get to see three tabs under teh properties for characteristics GL account. The first tab is General, where you can see the Display option dropdown list.
From here select Key and Text, then click OK , you can find the text for the field you are looking for.

Similar Messages

Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name.

Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name. Hard to know who is calling/texting! A few times I've tapped on the text message icon and I can actually watch as the conversations turn from showing just numbers to the contact names. Same thing when looking at call history and voice mail- sometimes it shows numbers and then I'll go back and the contacts will be back. So frustrating!

boomer1630 wrote:
- i have a Samsung S3)
-I have tried using *228 to update.
You don't dial *228 to update the Preferred Roaming List on 4G phones; I"m surprised the call went through. The PRL updates are handled by the SIM card.
Try this and see if it helps: turn off the phone, remove the SIM card, and wait a few minutes. Then re-insert the SIM card, turn the phone back on, and give the phone a few minutes to re-establish a network connection.

Need Attribute Text instead of public name in Siebel

Hi Experts,
Is it possible in OPA to send across attribute text instead of public name / attributeName in the "SaveSession" inbound interface to Siebel application?
Thanks,
Vinay

Vinay,
Unforunately SaveSession only saves the attributes and their values. The text of an attribute cannot be saved.
If you really need the attribute text, you would probably have to use some custom code to do the following:
1. Create a text attribute (a2) that will hold the text of the attribute you want the text for (a1):
2. Create a event handler that sets the value of the text attribute (a2) to the text of the attribute (a1).
3. When save is called the text attribute (a2) will be saved to the session.
Its no a very elegant solution, but its the only way I can think of to do it.
Cheers
Frank

Display metadata instead of clip name on the clips in the timeline and in the source monitor

Is there a way to display metadata instead of clip name on the clips in the timeline and in the source monitor? Clip names are usually set by the camera and are of no use to me. What i would like the clip and the source monitor to display is the name of the shot from the metadata. That's,in my opinion, a very useful info when you're editing a film. If that feature doesn't exist, is there a way to batch rename clips based on metadata?

thanks
is that new or was that always there. Not to sure if I have tried that in the past
anyway it helped and will makes things much faster
one other question maybe you have an answer to that too. it seems both Audio tracks are independ when putting on keyframes is there a way when using keyframes in the time line that it affect both channels of audio for example a1 an a2
once again thanks for your help

I am unable to see text after clicking on a pdf download.I just get a mid grey screen .I can send the pdf to my blackberry and see it -so the file is ok .I recently was at an official site that gave me an Adobe down load /update .Help please .

Why am I suddenly unable to see pdf (on iMac) when I click on them ?There is is just a mid grey blank screen .I have sent pdf to my Blackb and I can read it there ,so the file is OK .I recently tried to down load a recent version of Adobe reader from a government site -could this be the cause?If so ,how do I uninstall it ?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste (command-V) into the text box that opens, then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Unable to see text data in the reporting bw 3.5

Dear Gurus,
My clinet wants to see the text data for all the records in the reporting.unfortunately he cant see text data for only 5 records in the colum. i checked in the query designer for that object ,in properties its given as key and text. can any one suggest me why the text data is not comming for only that records..
Thanks in Advance.
Srikanth.

Dear Pavan,
Thanks for the reply, the query properties are already set like key and text before, the problem text is showing to all the records except 6 records,for this 6 records in the place of text it is showing only same technical name..please guide..
Thanks,
srikanth.

SharePoint 2010 Web Analytics showing user Display Name and Account Name from the same user

Hi!
Since July, 16th 2012 the Web Analytics Daily Unique Visitors reports started to show almost the double of visitors we used to have on our Web Application. Here are some of the data (I intentionally deleted the weekend data):
10/7/2012 2.497
11/7/2012 2.723
12/7/2012 2.722
13/7/2012 2.699
16/7/2012 5.055
17/7/2012 4.963
18/7/2012 4.954
19/7/2012 4.998
20/7/2012 4.965
23/7/2012 5.117
24/7/2012 5.012
25/7/2012 5.071
As you may notice the data jumped from around 2.700 unique visitors to around 5.000 unique visitors. As the number of permissioned users remains constant it is pretty odd. I also checked the Number of Page Views report and see no change on its behavior.
The number of page views remained constant.
So I went to look the Top Visitors report and understand why the visitors number almost doubled. The analytics started to count the users Display Name and Account name as two different visitors with a different number of page views. Let me show you an example
from yesterday (July, 25th) Top Visitors report:
#    Visitor                  Page Views   %
1   Cinthia XXXXXXXXXX    359      0,55%
5   Giselle XXXXXXXXXX     143        0,22%
7    Aline XXXXXXXXXX       138        0,21%
15 nt\cmazevedo              111        0,17%
60 nt\gbsantana                 69        0,11%
73 nt\aglsiqueira                 65      0,10%
"Cinthia" and the account "nt\cmazevedo" are the same person. The same is applied to "Giselle" / "nt\gbsantana" and "Aline" / "nt\aglsiqueira".
As I stated this is an example from July, 25th. If I checked the same report from a period before July, 16th I can only see the users Display Name as "Visitors". No account name is displayed or counted as a different visitor.
About the environment:
We have two SharePoint 2010 farms: a "corporate" and a "enterprise". The corporate farm contains four web servers and a central administration servers with publishing services. The enterprise farm contains two servers running User Profile Services, Search
Services and some others. Our main version is the SP1 with June/2011 Cumulative Update with a few more hotfixes applied.
This behavior on analytics is affecting all web applications (we have more than 20) installed on this farm and my company Support team said that no change were made on SharePoint on the weekend the problem started.
Does anyone have any tip about what is going on?
Thanks in advance!

Hi, Manas!
First of all thanks for your interest on this issue but I don't think it is related to the User Profile or the Active Directory.
I checked both records and there was no change on the Display Names. All the users have "full names" as display names (first + middle + last name) and not logins as SharePoint is displaying on this report.
But I did a test yesterday and checked the results today confirming that just the access been made using a specific server are causing this. Explaining it better:
I have four web servers on my farm named from P01 to P04. Then I created this test script:
Step 1: Change local HOSTS file to point the web application on the server P01.
Step 2: Access site "A"
Step 3: Access site "B"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P02.
Step 2: Access site "C"
Step 3: Access site "D"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P03.
Step 2: Access site "E"
Step 3: Access site "F"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P04.
Step 2: Access site "G"
Step 3: Access site "H"
Step 4: Close the browser.
I asked three users to execute that script. The results: All access to the sites "C" and "D" were registered on Web Analytics with the user account name such as "nt\cmazevedo". All the other sites registered the user Display Name correctly such as "Cinthia
XXXXXXXXXX".
With this test we could isolate the problem just on the server P02. It doesn't occur on the others. Now my support team is trying to find any configuration difference between this server and the other three that could point for the root cause.
I am also looking for some information regarding the service responsible for this task ("transform the account name into a display name") to understand why it doesn't work on one server and works on the others.
Thanks!

HT4528 i upgraded from an iphone to a Samsung galaxy and now i am unable to receive text messages now from iphone users.the iphones think that my number is still another iphone and always sends a message as imessage.

Upgraded from iphone to a Samsung and now i am unable to receive text messages from other iphone users unless they disable imessage .
Being my original number was on an iphone is why this is happening .
Please help. Almost everyone has an iphone

You should have turned iMessage off before disabling the phone. Do you still have the phone so you can turn iMessage off? If not, you will need to go to Apple support on their website and delete the product from your profile.

HT5621 I've changed my E.Mail and Apple ID but my account name is the old one - can'nt get rid of it . Please advise.

I've changed my E.Mail and Apple ID but my account name is still the old one - can'nt get rid of it .
Please advise.

Does Apple ID: Changing your Apple ID help?

Names for the hierarchy nodes???

Dear Friends,
During the process of loading hierarchies for 0MATERIAL, I have loaded the hierarchy Product Hierarchies for Material MARA (PRDHA) and when I go to the display mode of the loaded hierarchy under InfoObject 0MATERIAL, it has the nodes numbered (1,2,3 etc) but the names of the nodes do not appear as expected. Now how do I get the names for the nodes? Is there anything that I am missing?
Also is there any documentation which explains the procedure for loading hierarchies for 0MATERIAL? All or any help will be appreciated.
Thanks
Mike

Hi,
Try this:
Load the data for 0PROD_HIER_TEXT and then see the hierarchy on Material.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Can't "see" User account name in the GUI anymore ...

Hello Community
    Using WS2012 I created user account in AD. I right clicked a user account and chose "Move".
    The problem is my finger slipped and hit other keys.
    Now I can't see the user account anymore.
    When I run the following command:
        get-aduser -filter 'Name -like "user1"' I get the results below:
            DistinguishedName : CN=user1,DC=<DomainName>,DC=<SomeName>,DC=us
    The problem is how can I "see" what folder name, OU or the group's name that user1 resides at in
the GUI?
    Thank you
    Shabeaut

If I understand well, you were able to get the user DN. Based on the name, the user account should be directly under your domain (Not under an OU or a Container). So, use ADUC and select your domain. Once done, you should be able to see the user account.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

I am unable to see text in boxes on web pages after selecting from a drop down menu. eg country, however typed answers are visible

In the box below which asks the question "This happened" I selected 'every time Firefox opened" and no text appeared in the text box. After selecting a few times on different answers they started to work except for answer three which I have selected now but the box appears clear, that is, no text is visible on my screen.

I should also note something that I did that I think may be causing the default wiki and blog theme to not appear. In Server Admin, selecting Web, then going to Settings and on the Web Services tab, I changed the Data Store path to:
/Library/WebServer/Documents
I did this thinking it would create the html pages in the directory that the placeholder page was indicating that I should put my web page, but I think that is wrong, now. Does anyone know the default path for the data store?

Help with removing my account name from the search...

Dear Sirs:
Due to a breach security in my P.I., I need to have my skype name to be removed from the search directory. Please help me.
Thanks,
GP

Hi, GP2013, and welcome to the Community,
Please take a look at this information: 'Can I delete my Skype account?' and then contact customer service for assistance. We here in the Community do not have access to Skype account details.
Here is a slightly annotated version of the instruction to file your request with Skype Customer Service, and to receive a reply via e-mail. Hope this serves as a useful road map!
Regards,
Elaine
How can I contact Skype Customer Service?
Skype offers help and support through:
The Skype Support website
The Skype Community
The Heartbeat blog
Skype blogs
Email and Live chat (for eligible customers)
To get help with the issue you’re experiencing:
Go to the Support request page. You will be asked to sign on to the Skype website at this step.
Select the topic you need help with and the problem you’re experiencing. ... or the closest topic which matches your enquiry. Some information that might help with your problem is displayed. These are the FAQ articles pulled from the library for your review.
If you still feel that the information doesn’t help, scroll down to the bottom of the website page and click the Continue support request button at the bottom of the screen.
Select your contact method. (We recommend that you check our Skype Community first. No need to circle back here, as the Community is where you started!)
If you chose email, enter your details, describe your problem, and then click Send support request. We'll get back to you as soon as we can.
We don’t currently provide telephone support.
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Unable to now access my Delicious account due to the update and am unhappy with it!

I have just installed the latest version of Mozilla and have now found that my Delicious account is no longer available on my Add-ons. I use this a lot and its most inconvient that I cannot access it properly. I am REALLY UNHAPPY and want to get this thing off my system or find a way to re-install my Delicious where I want it.
Could you please tell me how I can go about this and if I can't then I will stop using Mozilla.

You can try this extension to override compatibility issues,
* https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

How to get the parent name in the hierarchy

Hi Colleagues.
Im working on with java webdynpro by showing hierarchical data.
When I select a leaf item, I should get the possible parent items.
For Ex:
A
B
C
|
D
When I select D, I need to get the information as A-B-C-D.
How can I acheive this?
Thanks
Rakesh

Hi Rakesh
You can go up to the root using the following methods:
IDNode dNode = dElement.node();
IWDNodeElement cElement = dNode.getParentElement();
IWDNodeElement bElement = cElement.node().getParentElement();
BR, Siarhei

Unable to see text instead of account name in the hierarchy

Similar Messages

Maybe you are looking for