Unable to see the file share content via UNC path

I have run a cmd command to modify the NTFS permissions on a few home directories.
That command has helped me to remove all from the ACL of shared folders; and add domain admins into it.
I am an admin on that Windows server. Now, whenever I try to access any home directory via UNC path; it doesn't displays the files and folders in it. But, if I go to the server and try to open the particular home directory from there...first it gives me
a prompt that I currently do not have access on folder and then gives me an option to click on continue and then I can access the files and folders within the directory.
I am also able to see the files and folders in the directory via UNC path after doing the above steps.
Can somebody help me understand what I did wrong here and how can this be resolved now?

Sorry, am added into local administratir group. But, NTFS permissions shows that I have only "read" and "change" permissions (I have checked this from effective permissions).
The ACL of folder shows only "Domain Admins" have full access and I am not a part of AD group "Domain Admins". I think this is the root cause of the issue.
I am running below mentioned command to give myself full access on the file shares without making any changes to the current ACL of all shared folders. However, it is not working and not even throwing any error message.
for /f %i in (u:\users.txt) do cacls \\hdfile01\users$\%i /C /G "AMadm":F
users.txt contains 'cn'. Another thing to notice here is that if I just keep one ID in .txt file and then run my command; it is working. But its not running for all users in loop.
Can somebody please help.

Similar Messages

Exchange Server CCR 2007 unable to see the File Share Witness resulting in mailbox failover ?

Hi people,
Here's my Exchange Server 2007 SP3 in the ideal and normal situation:
Mailbox Server (CCR – Stretched Cluster) Nodes
PRODEXMBX01-VM (Active Mailbox, Quorum) – 10.1.1.53
DREXMBX01-VM (Passive mailbox) – 192.168.1.88
Hub Transport and Client Access Server Nodes
PRODEXHTCAS02-VM – 10.1.1.54
PRODEXHTCAS03-VM (FSW holder) – 10.1.1.55
DREXHTCAS02-VM – 192.168.1.89
Saturday early morning, for some unknown reason the Active Mailbox Server (PRODEXMBX01-VM)
cannot access or see the FSW on the HT server PRODEXHTCAS03-VM, thus
the mailbox gets failover to the DR Mailbox server (DREXMBX01-VM).
Here’s the Events logged:
Log
Name:      System
Source:        Microsoft-Windows-FailoverClustering
Event ID:      1564
Task Category: File Share Witness Resource
Level:Critical
User:          SYSTEM
Computer:      PRODEXMBX01-VM.domain.com
Description:
File
share witness resource 'File Share Witness (\\PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01)'
failed to arbitrate for the file share '\\ PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01'.
Please ensure that file share '\\ PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01'
exists and is accessible by the cluster.
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Event ID:      1177
Task Category: None
Level:       Critical
User:     SYSTEM
Computer:PRODEXMBX01-VM.domain.com
Description:
The Cluster service is shutting down because quorum was lost.
This could be due to the loss of network connectivity between some or all nodes
in the cluster, or a failover of the witness disk.
Run
the Validate a Configuration wizard to check your network configuration. If the
condition persists, check for hardware or software errors related to the
network adapter. Also check for failures in any other network components to
which the node is connected such as hubs, switches, or bridges.
So I had to perform manual failover back from DR to production so that both Active mailbox and the Quorum
are held by the Production Mailbox server (PRODEXMBX01-VM).
On Sunday Morning, the Event ID Critical 1564 occurred again thus causing only the quorum only to failover
to the DR mailbox server (DREXMBX01-VM) but the Active mailbox role is still held by the Production Exchange server (PRODEXMBX01-VM).
So now the situation is like the following:
Mailbox Server (CCR – Stretched Cluster) Nodes
PRODEXMBX01-VM (Active Mailbox) – 10.1.1.53
DREXMBX01-VM (Passive mailbox, Quorum) – 192.168.1.88
Hub Transport and Client Access Server Nodes
PRODEXHTCAS02-VM – 10.1.1.54
PRODEXHTCAS03-VM (FSW holder) – 10.1.1.55
DREXHTCAS02-VM – 192.168.1.89
So what causing the mailbox servers unable to contact the File Share Witness?
/* Server Support Specialist */

Did you check the blog above?
The account used in the clustered machine should have access to
\\PRODEXHTCAS03-VM\FSM_DIR_ExMbxCluster01. Please check the permissions. Try giving full permission to admins as well (just to try)
MAS
I've followed this (http://technet.microsoft.com/en-us/library/bb124922(v=exchg.80).aspx) instruction and there is no mentioning other than the Cluster Service Account.
/* Server Support Specialist */

Got new iMac, I had completed the migration from PC to new Apple computer, but still unable to see the files on the iTunes

got new iMac, I had completed the migration from PC to new iMac, but still unable to see all the apps and music that were saved from the old PC to new iMac. Please help.

My guess is the 30-day trial period has expired but you didn't remove the trial before installing the full version. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

On my iphone 4s i am unable to see the files in my folders on hotmail

when i go into hotmail on my phone it shows my folders but when i open them they are all empty. how can i get the emails from these folders from my computer onto my phone

Are you accessing the account with the Mail app?
If so and you want all server stored mailboxes available on your iPhone, you must create/access the account as an Exchange account. Instructions for doing so should be available via Microsoft's Hotmail website or try a Google search for it.

Unable to get the file system information for: \\****servername\E$\; error = 64 Unable to distribute content to DP

One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.

Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically.

Unable to see the uploaded file using gos object

Hi Experts,
I uploaded the file to server by using the below code. But I am unable to see the uploaded file. Please help me out hot to view the uploaded files (list the file name and view the content) (i want to upload the file by getting the url as input and by clicking the button)
Code to upload the file.
DATA: wa_zqtc_gos_request TYPE zqtc_gos_request.
DATA: l_attachment        TYPE swo_typeid.
DATA: lo_gos_service      TYPE REF TO cl_gos_document_service.
obj-objkey = req_num.
obj-objtype = objtype.
CREATE OBJECT lo_gos_service.
CALL METHOD lo_gos_service->create_attachment
    EXPORTING
      is_object     = obj
    IMPORTING
      ep_attachment = l_attachment.
I tyied with this to view the files but the attachement link is disabled. (i want to view the files by clicking the icon-GOS icon in tool bar)
DATA: wa_zqtc_gos_request TYPE zqtc_gos_request.
DATA: l_attachment        TYPE swo_typeid.
DATA: lo_gos_service      TYPE REF TO cl_gos_document_service.
obj-objtype = objtype.
obj-objkey = req_num.
CREATE OBJECT manager
    EXPORTING
      is_object = obj
    EXCEPTIONS
      OTHERS    = 1.
Please help me out how to view the file and list.
thanks & regards
T.Tamodarane
Edited by: T.Tamodarane on Oct 23, 2009 9:55 AM
Edited by: T.Tamodarane on Oct 23, 2009 9:56 AM

Hi,
Please post ur thred below:
PL/SQL
Regards
Meher Irk

Content editor webpart- unable to see the list data if given the url in the content link?

HI,
In content editor webpart,unable to see the list data
when try to give the list url in the content link?
please help on the above issue.
and also want to see the styles to the list.
how to add the styles to the list row by row.

Hi sudhir,
If you click the ellipsis beside the content link, it will pop up a window for you to input the file link. No list option will be offered to be chose.
When I add a content editor web part to a list, I usually save the code into a Notepad file and save it to a document library. Then copy the url of the document and then paste it into content link.
Also, you could click Edit HTML Source, then directly add code into the popup window. It works as the same as the above method.
Regards,
Rebecca Tu
TechNet Community Support

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

Unable to see the portal content directory in content adminstration

Hi,
I am unable to see the portal content directory in the content administration. I am not the super administrator.I have been assigned content admin role. But, I am unable to see the PCD.I see from previous blogs that permission has to be set for my role.
Can any one help me in telling the procedure to set the permission.If permission is not the issue then do tell me the solution for it.
Suganya

Hi Suganya,
The content admin role normally is sufficient to see / read the portal content catalogue (as far as the standard settings are concerned). But maybe they have been restricted on your implementation by some administrator.
Some with sufficient permissions on the portal content catalogue has to right-click on the root (portal_content) object, "open", "permissions", and has to provide at least administrative "read" permission to you, some role (content admin for example) which is assigned to you or some group you belong to.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

Unable to see the portal content directory in content administration role

Hi,
I am unable to see the portal content directory in the content administration. I am not the super administrator, i have been assigned other roles. But, I am unable to see the PCD. Please help me how this can be sorted out.
Thanks much in advance,
Sunitha.S

Hi Sunita,
Contact your systen admin people , he/she will assign the Read/Write or Full controls to content_admin_role in the system administration -> Permissions -> select portal content folder and right click the select open Permissions , There he/she has to add content_admin_role in Assigned Permissions category and under Administrator category select Full Control and select End user check box and save the changes.
Then you can see the Portal Content and you can create /change the portal contents.
Thanks and Regards,
Hari

Unable to access server files shares with Active Directory Users

Quick breakdown of my issue.
I have setup a Yosemite file server running the latest version of Yosemite and Server.
File sharing in Server.app is enabled and shares have been created
The server is bound to my company's Active Directory and you can directly login to the computer via AD credentials.
The big issue is this, unless the user has directly walked up to my server and logged into it at least once, they cannot authenticate to the file shares via their AD credentials.
For example: Administrator (me) I can login and access all file shares without issue.
Jane Smith (SMITH) who has actually walked up to my server and logged in via her AD credentials, can also access all file shares. (That she has access to)
John Doe (JDOE) who has not logged into the server in anyway, cannot authenticate to the server file shares at all (even though I have granted him permission) He just gets an "Access Denied" message.
I have gone into Directory Utility and changed the search order to give AD priority and this still doesn't resolve the problem.
We have unbound the server from AD and added in back again and still not able to resolve.
If you open Server.app and go to add someone from AD to a file share, it finds the AD user quickly and everything looks right. but still unable to authenticate to the server if they haven't directly logged into it before?
All of the documentation and google articles I have found say my server is setup correctly, any help would be greatly appreciate it!
Thanks in advance!

I figured this out. In Mountain Lion Server, it doesn't matter if you give the user rights to a shared file or folder, if the user doesn't have access the File Sharing service, they can't get it. I had to find the specific users in the Server app under the AD in the Users tab, and give them rights to the File Sharing service. I think you can do this for a whole AD group as well, but I haven't tried.

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Unable to Receive the File into Target Directory Using FTP

Hi All,
Here I Did Simple File-File Scenario With FTP.
Iam Able to Pick the File From the FTP Location And File has been Deleted From Source Location ( Set the Processing Mode as Delete ).
Unable to See the Pipeline Steps in Moni, But Able to Se the Success Message With the Inbound Payload only.
Also chked with the comm. channel of sender and receiver, where the sender shows the message process details but not the receiver comm. channel.
Regards
Giri

You Did the right thing in communication channel that u selected the IS.
Hi
Just check out if you sending the correct parameters and also check out the payload you sending and check out in SXMB_MONI for you message that after success wat is the payload and match with your input.
Rather, for input check, In IR, get the XML data from ur Message Mapping and then save it to your inbox that is input directory.
Also check out the permission of Output directory and also check the configuration of sender and reciver communication channel.
Regards
Aashish Sinha
PS : reward points if helpful

Unable to see the deployed webservices in websevices list

In SAP EP System some of the APIs are not exposed to clients and those APIs needs to be called thru webservices (like get all Roles names from the SAP-EP system, add a role to user in SAP-EP system, Remove a ole from the User in SAP EP system, get all assigned Roles of a User in SAP EP system, get all users for a role in SAP-EP system, and get users for a group in SAP-EP system).
To achieve the above functionality, we have developed the portal (.par file) which will call the SAP EP APIs using web services.
We have developed a piece code (.par file) in net viewer Developer studio 2.0.9; we deployed /tested this .par file on to SAP EP6 SP2 successfully. Now, we need to test this .par file in SAP EP6 SP13 but we are not able to succeed in deploying this file like how we are doing it in SP2. After successful deployment of the PAR file we are unable to see the particular webservice in the webservices list.
For deploying the PAR file we followed the following navigation steps:
1.login into SAPEP as sapadmin.
2.click the systemadministrator tab.
3.click the support tab.
4. select the portalruntime link.
5.click on the AdministratorConsole link.
upload window will open where we upload the PAR file.
For checking the uploaded Webservices we followed the following navigation steps:
1.login into SAPEP as sapadmin.
2.click the systemadministrator tab.
3.click the support tab.
4. select the portalruntime link.
5.click on the soapadmin link.
In case of SP13, we are not able to see the uploaded webservices. But, when we deploy .par file it says deployed successfully (not throwing any errors).
Edited by: praveen bikumalla on Jan 21, 2008 7:38 AM

If we restart the services that is there in Systemconfiguration->servicesconfiguration->Applications i am getting the following error
Server 1337850:Error in the listener class com.sap.ip.portal.admin.portalanywhere.QueryHandler during the process of handleTopic.

Unable to see the pageviewer in a page from pages library in a custom page layout

<File Url="Inbox.aspx" Type="GhostableInLibrary" Level="Published" Path="myPages\Pages\Inbox.aspx" >
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="Header" ID="inboxwp1">
<![CDATA[<WebPart xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/WebPart/v2">
<Title>Inbox</Title>
<FrameType>Default</FrameType>
<Description>Displays another Web page on this Web page. The other Web page is presented in an IFrame.</Description>
<IsIncluded>true</IsIncluded>
<ZoneID>wpz</ZoneID>
<PartOrder>0</PartOrder>
<FrameState>Normal</FrameState>
<Height></Height>
<Width />
<AllowRemove>true</AllowRemove>
<AllowZoneChange>true</AllowZoneChange>
<AllowMinimize>true</AllowMinimize>
<AllowConnect>true</AllowConnect>
<AllowEdit>true</AllowEdit>
<AllowHide>true</AllowHide>
<IsVisible>true</IsVisible>
<DetailLink />
<HelpLink />
<HelpMode>Modeless</HelpMode>
<Dir>Default</Dir>
<PartImageSmall />
<MissingAssembly>Cannot import this Web Part.</MissingAssembly>
<PartImageLarge>/_layouts/15/images/mscntvwl.gif</PartImageLarge>
<IsIncludedFilter />
<Assembly>Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly>
<TypeName>Microsoft.SharePoint.WebPartPages.PageViewerWebPart</TypeName>
<ContentLink xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">/_layouts/15/AppPages/InboxRedirectPage.aspx</ContentLink>
<SourceType xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">URL</SourceType>
</WebPart>]]>
</AllUsersWebPart>
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="LeftWP" ID="wpLeft">
<![CDATA[
<webParts>
<webPart xmlns="http://schemas.microsoft.com/WebPart/v3">
<metaData>
<type name="myWebParts.ProjectLinks.ProjectLinks, m, Version=1.0.0.0, Culture=neutral, PublicKeyToken=52f3214933d771f7" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">myprojectLinks</property>
<property name="Description" type="string">My Visual Web Part</property>
</properties>
</data>
</webPart>
</webParts>
]]>
</AllUsersWebPart>
<Property Name="ContentTypeId" Value="0x010100C568DB52D9D0A14D9B2FDCC96666E9F2007948130EC3DB064584E219954237AF390076F7B5D03DD146D699D042E1C5D76EF7" />
<Property Name="FileLeafRef" Value="Inbox.aspx" />
<Property Name="Title" Value="Inbox" />
<Property Name="PublishingPageLayout" Value="~SiteCollection/_catalogs/masterpage/myPageLayout/myPage.aspx, my custom Page Template"/>
<Property Name="ContentType" Value="myPageCT" />
<Property Name="_ModerationStatus" Value="3" />
<Property Name="FileDirRef" Value="Pages" />
<Property Name="FSObjType" Value="0" />
</File>
I have created a custom page layout in my site collec. using VS 2012 and deployed am able to see the page in the pages lib [inbox.aspx].
Here, I have added a page viewer web part and I want to redirect to another application page, which is already coded [inboxredirect.aspx] in my solution[its another dll - another SP solution which has appln pages and web parts
etc - ]
The issue is that, i am unable to see the page viewer web part when the page is displayed. inbox.aspx is a page which is created once my custompagelayouts solution is deployed and when i navigate to this page, i am stuck . i am getting
the " access denied " message is displayed.
can anyone help why this error is displayed?
in my inboxredirect.aspx page i am inherting from unsecuredlayoutspagebase class, so i dont think , access denied message should come.
using System;
using System.Configuration;
using Microsoft.SharePoint;
using Microsoft.SharePoint.WebControls;
namespace myproj.Layouts.AppPages
public partial class InboxRedirectPage : UnsecuredLayoutsPageBase
string projectName = string.Empty;
protected void Page_Load(object sender, EventArgs e)
string siteUrl = SPContext.Current.Web.Url;
using (SPSite site = new SPSite(siteUrl))
using (SPWeb web = site.OpenWeb())
string urlProjectName =Request.UrlReferrer.ToString();
projectName = urlProjectName.Split('/')[5];
//end
SPUser user = web.CurrentUser;
if (user != null)
above is my appln page to which i am redirecting.

Solved it myself guys... (Well the major part)
Got help from here...
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/blank-open-save-dialog-when-browsing-document-library-from-office-clients.aspx
and
http://www.sharepointconfig.com/2011/02/vs2010-list-definition-template-missing-file-dialog-view/
with some tweaks of my own..
Still working on it because its showing SharePoint 2010 header... And I need 2013 look...

Unable to see the file share content via UNC path

Similar Messages

Maybe you are looking for