Unable to see the portal content directory in content adminstration

Hi,
I am unable to see the portal content directory in the content administration. I am not the super administrator.I have been assigned content admin role. But, I am unable to see the PCD.I see from previous blogs that permission has to be set for my role.
Can any one help me in telling the procedure to set the permission.If permission is not the issue then do tell me the solution for it.
Suganya

Hi Suganya,
The content admin role normally is sufficient to see / read the portal content catalogue (as far as the standard settings are concerned). But maybe they have been restricted on your implementation by some administrator.
Some with sufficient permissions on the portal content catalogue has to right-click on the root (portal_content) object, "open", "permissions", and has to provide at least administrative "read" permission to you, some role (content admin for example) which is assigned to you or some group you belong to.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

Similar Messages

Unable to see the portal content directory in content administration role

Hi,
I am unable to see the portal content directory in the content administration. I am not the super administrator, i have been assigned other roles. But, I am unable to see the PCD. Please help me how this can be sorted out.
Thanks much in advance,
Sunitha.S

Hi Sunita,
Contact your systen admin people , he/she will assign the Read/Write or Full controls to content_admin_role in the system administration -> Permissions -> select portal content folder and right click the select open Permissions , There he/she has to add content_admin_role in Assigned Permissions category and under Administrator category select Full Control and select End user check box and save the changes.
Then you can see the Portal Content and you can create /change the portal contents.
Thanks and Regards,
Hari

Content editor webpart- unable to see the list data if given the url in the content link?

HI,
In content editor webpart,unable to see the list data
when try to give the list url in the content link?
please help on the above issue.
and also want to see the styles to the list.
how to add the styles to the list row by row.

Hi sudhir,
If you click the ellipsis beside the content link, it will pop up a window for you to input the file link. No list option will be offered to be chose.
When I add a content editor web part to a list, I usually save the code into a Notepad file and save it to a document library. Then copy the url of the document and then paste it into content link.
Also, you could click Edit HTML Source, then directly add code into the popup window. It works as the same as the above method.
Regards,
Rebecca Tu
TechNet Community Support

Error while creating request list Unable to detect the SAP system directory

We are upgrading SAP BW (NW 7.0 EHP1) to SAP BW (NW 7.3)
source OS: Windows 2008 R2, source DB: MSSQL server 2008 R2 SP1 CU3
I had started the upgrade by running: STARTUP.BAT
I had started the DSUGui on the server (CI / DB on the same server) from: D:\usr\sap\BP1\upg\sdt\exe\DSUGui.bat
I ran both programs (run as administrators).
Once SAP Gui connects and was able to create userid/ password and when ready to start the initialization phase (click next)
gives me the error
Error while creating request list - see preceeding messages. Unable to detect the SAP system directory on the local host
I had tried STARTUP.BAT "jce_policy_zip=Z:\export-import\downloads\jce_policy-6' and still the same error.
I had started DSUGui.bat with trace and the trace file contents are
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[D:
usr
sap
bp1
upg
sdt
trc
server.trc]/>
<!PATTERN[server.trc]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:102) [Thread[ExecuteWorker,5,main]]: Execution of command com.sap.sdt.engine.core.communication.CmdActionEvent@376433e4 failed: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]: com.sap.sdt.engine.core.communication.CmdActionEvent [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
 at com.sap.sdt.dsu.service.req.DSURequestListBuilder.persistSystemInfo(DSURequestListBuilder.java:277)
 at com.sap.sdt.dsu.service.DSUService.createRequestList(DSUService.java:338)
 at com.sap.sdt.dsu.service.controls.DSUListener.actionNext(DSUListener.java:144)
 at com.sap.sdt.dsu.service.controls.DSUListener.actionPerformed(DSUListener.java:67)
 at com.sap.sdt.server.core.controls.SDTActionListener$Listener.actionPerformed(SDTActionListener.java:46)
 at com.sap.sdt.engine.core.communication.CmdActionEvent.actOnEvent(CmdActionEvent.java:43)
 at com.sap.sdt.engine.core.communication.CmdEvent.execute(CmdEvent.java:69)
 at com.sap.sdt.engine.core.communication.ExecWorker.handleCmd(ExecWorker.java:36)
 at com.sap.sdt.engine.core.communication.AbstractWorker.run(AbstractWorker.java:93)
I could not get Upgrade started. Any help is appreciated
Thanks
Prathap

Did you get this solved?
I have the same problem

Not able to see the Adapters@Integration Directory!!

Hi,
I have created Data types,Messages Types, Message Interface in Integration Repository.
I have created a scenario in Directory and assigned Business systems too(I'm doing file to file scenario) and while trying to create Communication channels i'm unable to see the adapters under Parameters Tab.
 Its not showing any Adapters in ADAPTER TYPE option and also
Transport Protocol and
Message Protocol are blank.
What could be the reason??
Please guide me in order to complete my scenario.
Thanks in Advance.
LNM

hi madduri,
check these links....
Not able to see the adapter types in ID
Adapter Engine not found in ID
check the last post here.... u will get ur answer !!!
Adapter Type not found
Do these steps
1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
3) Goto Repository (Design)
4) Choose -> Tools -> Import Design Objects
regards
BILL
**mark the thread answered when u got ur answer

Unable to see the deployed webservices in websevices list

In SAP EP System some of the APIs are not exposed to clients and those APIs needs to be called thru webservices (like get all Roles names from the SAP-EP system, add a role to user in SAP-EP system, Remove a ole from the User in SAP EP system, get all assigned Roles of a User in SAP EP system, get all users for a role in SAP-EP system, and get users for a group in SAP-EP system).
To achieve the above functionality, we have developed the portal (.par file) which will call the SAP EP APIs using web services.
We have developed a piece code (.par file) in net viewer Developer studio 2.0.9; we deployed /tested this .par file on to SAP EP6 SP2 successfully. Now, we need to test this .par file in SAP EP6 SP13 but we are not able to succeed in deploying this file like how we are doing it in SP2. After successful deployment of the PAR file we are unable to see the particular webservice in the webservices list.
For deploying the PAR file we followed the following navigation steps:
1.login into SAPEP as sapadmin.
2.click the systemadministrator tab.
3.click the support tab.
4. select the portalruntime link.
5.click on the AdministratorConsole link.
upload window will open where we upload the PAR file.
For checking the uploaded Webservices we followed the following navigation steps:
1.login into SAPEP as sapadmin.
2.click the systemadministrator tab.
3.click the support tab.
4. select the portalruntime link.
5.click on the soapadmin link.
In case of SP13, we are not able to see the uploaded webservices. But, when we deploy .par file it says deployed successfully (not throwing any errors).
Edited by: praveen bikumalla on Jan 21, 2008 7:38 AM

If we restart the services that is there in Systemconfiguration->servicesconfiguration->Applications i am getting the following error
Server 1337850:Error in the listener class com.sap.ip.portal.admin.portalanywhere.QueryHandler during the process of handleTopic.

Unable to see the uploaded file using gos object

Hi Experts,
I uploaded the file to server by using the below code. But I am unable to see the uploaded file. Please help me out hot to view the uploaded files (list the file name and view the content) (i want to upload the file by getting the url as input and by clicking the button)
Code to upload the file.
DATA: wa_zqtc_gos_request TYPE zqtc_gos_request.
DATA: l_attachment        TYPE swo_typeid.
DATA: lo_gos_service      TYPE REF TO cl_gos_document_service.
obj-objkey = req_num.
obj-objtype = objtype.
CREATE OBJECT lo_gos_service.
CALL METHOD lo_gos_service->create_attachment
    EXPORTING
      is_object     = obj
    IMPORTING
      ep_attachment = l_attachment.
I tyied with this to view the files but the attachement link is disabled. (i want to view the files by clicking the icon-GOS icon in tool bar)
DATA: wa_zqtc_gos_request TYPE zqtc_gos_request.
DATA: l_attachment        TYPE swo_typeid.
DATA: lo_gos_service      TYPE REF TO cl_gos_document_service.
obj-objtype = objtype.
obj-objkey = req_num.
CREATE OBJECT manager
    EXPORTING
      is_object = obj
    EXCEPTIONS
      OTHERS    = 1.
Please help me out how to view the file and list.
thanks & regards
T.Tamodarane
Edited by: T.Tamodarane on Oct 23, 2009 9:55 AM
Edited by: T.Tamodarane on Oct 23, 2009 9:56 AM

Hi,
Please post ur thred below:
PL/SQL
Regards
Meher Irk

Unable to see repository objects in directory

hi,
i am unable to see repository objects in directory(like message interface, interface mapping).
i have tried cache refresh but the issue still persists.

Check in SLD whether required software component is assigned to your techincal system and business system.
If it is not assigned to required technical and business system:
1. Assign the Software product to your technical system in SLD.
2. Add the Software component to your business System in SLD.
3. Go to Environment --> Clear SLD Cache in Integration Directoty..
Then try again.

Error when trying to run UCM from browser -The portal page for your Content

Hi
When I try and run the UCM in a browser using "http://localhost/idc", it showing
"The portal page for your Content Server needs to be rebuilt. Start the WebLayout Editor as a standalone application and select Update Portal... from the Options menu."
I did see a previous message that says to go to Weblayout Editor Applet - Options - Build Home Page - Update -Ok, but I was not able to see the Build Home Page option in the drop down.
Any ideas what may be causing this issue?
Thanks in advance for your help
Cheers
Sylvia

Hi Srinath
Thanks for your reply.
Commenting out the following lines still does not fix my problem.
<div align=center>Welcome to UCM10g for SIF DEV</div> 
 <$if IsLoggedIn$>UserName = <$UserName$> <$endif$>
 <$if IsDynamic$>Current Time = <$dateCurrent()$>
 <$else$>This is a static page.
 <$endif$>
I have installed this product on two environments following the same kind format.
In our dev environment I am able to type in the following to get to the Welcome to Content Server Page
http://devenv/idc/
In the other environment I use the following and I get that the error "The portal page for your Content Server needs to be rebuilt. Start the WebLayout Editor as a standalone application and select Update Portal... from the Options menu."
http://testenv/idc
So the only way to get to the Content Server Page is to type the full path as below which I don't want to do, because I want the welcome screen to appear first.
https://testenv/idc/idcplg?IdcService=GET_DOC_PAGE&Action=GetTemplatePage&Page=HOME_PAGE&Auth=Internet
Is there a way I can configure the application to get to my welcome screen instead of getting the error message detailed above?
Thanks
Sylvia

Patching WebLogic server - Unable to locate the specified product directory

We are trying to apply the October CPU patch to our WebLogic 10.3.6 installation on Windows Server 2003. However, when we run the below command:
bsu -install -patch_download_dir=E:\ofm11g\utils\bsu\cache_dir -patchlist=BYJ1 -prod_dir=E:\ofm11g\wlserver_10.3
We receive this error:
Unable to locate the specified product directory.[E:\ofm11g\wlserver_10.3]
That directory is valid. We are running two instances using this WLS installation - Oracle Reports 11.1.1.6 and Oracle Portal 11.1.1.6. We are trying to apply the patch with the same user that installed the software.
I was able to successfully run this command on a different server that runs Oracle Internet Directory 11.1.1.6.
Any ideas?

I was able to fix this by ensuring that E:\ofm11g\wlserver_10.3 contained two files: .home and .product.properties. After I copied these from a different server and edited to fit my environment, I was able to successfully install this patch.

Unable to see the personalization link on any page

Hi,
I am unable to see the personalization link on any of my pages (not even on login page).
I am setting the profile option value to "Yes" for the profile option
FND: Personalization Region Link Enabled
Also I have bounced the Apache.
Please help me as I am stuck due to this.
Thanks,
Anoop

Did you enabled the profile option Personalize Self-Service Defn (FND_CUSTOM_OA_DEFINTION) .It must be set to Yes.
Abhay

Unable to see the values in detail block

Hello,
I have a master detail block, when I query the form, I am unable to see the values for a particular field(Column), all other columns appear properly in the details block, Upon checking the same table(s) in SQL ( by using the JOIN defined in the where clause of the relationship in Forms) , it shows the relevant records for all fields. So what could be wrong with the Form, please advise.
Thanks
FM

IQ wrote:
I have just checked the field its a non-database field which is being used as a LOV column to display a value derived from LOV. How do I make this populate at Query time, as obviously this works when the Form is in a insert mode but not for Query mode. How to make it work for Query ? As it for LOV column and non-database filed, ignore my first suggestion.
Does your non-database filed has associate any column ?
For example, you have SUPPLIER_ID (database column) and SUPPLIER_NAME (non-database column). SUPPLIER_NAME has LOV column. And when selecting supplier name from LOV value also assign at supplier_id.
Now to show supplier name when querying, you have to write POST-CHANGE trigger at supplier_id. like
SELECT ASSC_CODE INTO :MST_SUPPLIER.ACC_CODE
FROM ACC_SUB_SUB_CONTROL
WHERE ASSC_ID=:MST_SUPPLIER.SUPP_ASSC_ID;Hope this helps

Unable to see the csv option while scheduling the report

I'm using BO XI 3.1. While i'm trying to make a schedule of a report, i am unable to see the csv export option. Is there a way to enable in the csv option?
Build version : 12.1.0.882
Edited by: mhsrinivasan on Mar 10, 2011 2:36 AM Added the version details

Scheduling the reports in CSV formate is possible in BO XIr3.1.
I would suggest you to contact to your BO Admin to check weather you have proper rights or not, in CMC scheduling part.

I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my room an

I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my room and am able to access the internet on my laptop, Ive also been able to through the Bose Soundlink air wifi set application connect the bose speaker to the Wifi too.
I am only able to play my itunes through my macbook speakers and cannot find the airplay button which should be next to the volume slide once turned down to less than 1/3 of the volume..

Thanks for your help. Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV. I guess I'm just stuck with using iPhoto on my MB Air. Thanks again.
paul

Unable to see the pageviewer in a page from pages library in a custom page layout

<File Url="Inbox.aspx" Type="GhostableInLibrary" Level="Published" Path="myPages\Pages\Inbox.aspx" >
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="Header" ID="inboxwp1">
<![CDATA[<WebPart xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/WebPart/v2">
<Title>Inbox</Title>
<FrameType>Default</FrameType>
<Description>Displays another Web page on this Web page. The other Web page is presented in an IFrame.</Description>
<IsIncluded>true</IsIncluded>
<ZoneID>wpz</ZoneID>
<PartOrder>0</PartOrder>
<FrameState>Normal</FrameState>
<Height></Height>
<Width />
<AllowRemove>true</AllowRemove>
<AllowZoneChange>true</AllowZoneChange>
<AllowMinimize>true</AllowMinimize>
<AllowConnect>true</AllowConnect>
<AllowEdit>true</AllowEdit>
<AllowHide>true</AllowHide>
<IsVisible>true</IsVisible>
<DetailLink />
<HelpLink />
<HelpMode>Modeless</HelpMode>
<Dir>Default</Dir>
<PartImageSmall />
<MissingAssembly>Cannot import this Web Part.</MissingAssembly>
<PartImageLarge>/_layouts/15/images/mscntvwl.gif</PartImageLarge>
<IsIncludedFilter />
<Assembly>Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly>
<TypeName>Microsoft.SharePoint.WebPartPages.PageViewerWebPart</TypeName>
<ContentLink xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">/_layouts/15/AppPages/InboxRedirectPage.aspx</ContentLink>
<SourceType xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">URL</SourceType>
</WebPart>]]>
</AllUsersWebPart>
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="LeftWP" ID="wpLeft">
<![CDATA[
<webParts>
<webPart xmlns="http://schemas.microsoft.com/WebPart/v3">
<metaData>
<type name="myWebParts.ProjectLinks.ProjectLinks, m, Version=1.0.0.0, Culture=neutral, PublicKeyToken=52f3214933d771f7" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">myprojectLinks</property>
<property name="Description" type="string">My Visual Web Part</property>
</properties>
</data>
</webPart>
</webParts>
]]>
</AllUsersWebPart>
<Property Name="ContentTypeId" Value="0x010100C568DB52D9D0A14D9B2FDCC96666E9F2007948130EC3DB064584E219954237AF390076F7B5D03DD146D699D042E1C5D76EF7" />
<Property Name="FileLeafRef" Value="Inbox.aspx" />
<Property Name="Title" Value="Inbox" />
<Property Name="PublishingPageLayout" Value="~SiteCollection/_catalogs/masterpage/myPageLayout/myPage.aspx, my custom Page Template"/>
<Property Name="ContentType" Value="myPageCT" />
<Property Name="_ModerationStatus" Value="3" />
<Property Name="FileDirRef" Value="Pages" />
<Property Name="FSObjType" Value="0" />
</File>
I have created a custom page layout in my site collec. using VS 2012 and deployed am able to see the page in the pages lib [inbox.aspx].
Here, I have added a page viewer web part and I want to redirect to another application page, which is already coded [inboxredirect.aspx] in my solution[its another dll - another SP solution which has appln pages and web parts
etc - ]
The issue is that, i am unable to see the page viewer web part when the page is displayed. inbox.aspx is a page which is created once my custompagelayouts solution is deployed and when i navigate to this page, i am stuck . i am getting
the " access denied " message is displayed.
can anyone help why this error is displayed?
in my inboxredirect.aspx page i am inherting from unsecuredlayoutspagebase class, so i dont think , access denied message should come.
using System;
using System.Configuration;
using Microsoft.SharePoint;
using Microsoft.SharePoint.WebControls;
namespace myproj.Layouts.AppPages
public partial class InboxRedirectPage : UnsecuredLayoutsPageBase
string projectName = string.Empty;
protected void Page_Load(object sender, EventArgs e)
string siteUrl = SPContext.Current.Web.Url;
using (SPSite site = new SPSite(siteUrl))
using (SPWeb web = site.OpenWeb())
string urlProjectName =Request.UrlReferrer.ToString();
projectName = urlProjectName.Split('/')[5];
//end
SPUser user = web.CurrentUser;
if (user != null)
above is my appln page to which i am redirecting.

Solved it myself guys... (Well the major part)
Got help from here...
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/blank-open-save-dialog-when-browsing-document-library-from-office-clients.aspx
and
http://www.sharepointconfig.com/2011/02/vs2010-list-definition-template-missing-file-dialog-view/
with some tweaks of my own..
Still working on it because its showing SharePoint 2010 header... And I need 2013 look...

Unable to see the portal content directory in content adminstration

Similar Messages

Maybe you are looking for