Unable to see the request in Reconstruction Tab of Info Cube

Hi Experts,
We are scm 5.1 version.
Actually I have created extraction process to extract data from Demand Planning area. I have extracted data from planning area also. I can see the request in to PSA as well as Info Cube but I am not able to see the request in reconstruction tab.
Is there any setting to see the request in to Reconstruction tab of the info cube?
Please advise..
Regards
Sujay

Hi rathy,
Is there any way to support the equivalent of reconstructions with the new BW 7.0 design?
I will explian in detail..
Reconstruction is critical functionality for our current DP solutions, it allows us to "reconstruct" old requests from the backup InfoCube (based on what's been kept in the PSA) and use this to restore data in the planning area to a day in the past. It is used whenever there is a technical or user error than needs to be un-done. I believe there is a way to accomplish with the BW 7.0 design.
Please suggest...
Thanks in advance..
Regards
Sujay

Similar Messages

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
to setup a comcast imap account on your iphone:
go to mail, contacts, etc in settings
under accts, select add account
select "other"
new screen, choose "add mail account"
now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
hit next
then the acct verifies
when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone. The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option.

Unable to see the configuration tab in DB13C in SOLMAN

Dear Experts,
I have a question where i am unable to see the configuration tab -> add systems in DB13C in our SOLMAN server (version is SAP NetWeaver 2004s), but i could locate the tab in other R3 systems, may i know for DB13C what is the difference between sapnetweaver and r3 systems?
I have gone through note 853610, it did not specify any scenarios relevant to mine.
Appreciate the replies. Thank you.
regards,
Lee

Hello Lee,
What is the Basis patch level in your solman system?.
Please, see the note 1028624.
Have you tried from DB13C -> Administration -> "Migrate db13C configuration"?
Regards,
Rafa

Unable to see the Hyperion tab in Excel 2003

Hi Hyperion gurus,
Can anybody shed light on an issue that a user encountered with Smartview? This user installed Smartview and had been using it without any problems. We just started parallel testing and he needed to use Smartview as part of the process. He is now unable to see the add-in in Excel 2003. He has no Hyperion tab and we cannot find any evidence that it has been installed. We reinstalled Smartview but even after reinstalling Smartview he is still unable to see the Hyperion tab in Excel. What is puzzling is that he does have the Hyperion tab in Word and is able to connect.
Would appreciate any help provided? Thanks.

I have seen the same exact problem at my company regarding the missing Hyperion tab in Excel (but present in MicroSoft Word). If you go into Excel, then select 'Help', then About MicroSoft Excel, then you'll see 'Disabled Items'. Scan the list for HSAddin.Dll. If this is on the list, highlight it, then select the 'Enable' button. (this is my first suggestion). I've also had to do the following in some isolated cases:
You should also try re-registering the following 3 SmartView DLL files. To do this, simply locate where these 3 files are stored on your local machine (the file names are):
HSAddin.dll
HSSpread.dll
HyperionSmarttag.dll
Usually these are stored within the following path: C:\Hyperion\Smartview\bin
To Register the files:
Open DOS (start->run->cmd) and change your path to C:\Hyperion\SmartView\bin
Type in the following, hitting enter key after each line:
regsvr32 hsaddin.dll
regsvr32 hsspread.dll
regsvr32 hyperionsmarttag.dll
You should receive a 'success message' for each file you register. Reboot your machine following this, and go back to Excel. Your menu should now be in place.
Thanks,
James Pryal

Unable to see the "Password Reset" tab in Indentity Store (SAP IDM 7.1)

I am trying to implement Password self-service as per the document "SAP NewWeaver Idenitty Management Identity Center Self-service password reset Implementation Guide" Version 7.1 Rev 2. In this guide, references are made to the Password Reset Tab in the Identity Store properties view in Identity Center. I do not see that tab in my view.
I followed the standard inst guides during the upgrade. Its a fresh implementation and we are on IDM 7.1 SP5
I have checked out couple of similar posts where it was resolved by installing SP3/4, does anyone have any other solution than applying the SP again ??
What do I need to do to have that tab?
Thanks

Matt,
Ours is a fresh installation
According to the PSS 7.1 V2 guide, i completed the section 1 where i creted the UME roles and the
Section 1: Creating the tasks
Creating the folder for the tasks
Creating the password reset task
Creating the password reset failed task
Then started the Section 2 Configuring the identity store and the first point the document says is "Select the identity store in the console tree and choose the "Password reset" tab: " which i am unable to see the tab in my system.
I am i missing some config steps here ? again i am just goin line - by - line what the doc says
Thanks
Edited by: Chetan on May 23, 2011 4:43 PM

I'm unable to see the attachment in SharePoint 2007 list alert as i have alreday added attachemt before submiting this request

I'm unable to see the attachment in SharePoint 2007 list alert as i have alreday added attachemt before submiting this request.The
below request I attach with attachment.That attachment coulmn is not apperaing

I am a little confused, can you please elaborate with screenshot
If this helped you resolve your issue, please mark it Answered. You can reach me through http://itfreesupport.com/

The server was unable to process the request due to an internal error.

Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>

<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227

Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

Unable to see the deployed webservices in websevices list

In SAP EP System some of the APIs are not exposed to clients and those APIs needs to be called thru webservices (like get all Roles names from the SAP-EP system, add a role to user in SAP-EP system, Remove a ole from the User in SAP EP system, get all assigned Roles of a User in SAP EP system, get all users for a role in SAP-EP system, and get users for a group in SAP-EP system).
To achieve the above functionality, we have developed the portal (.par file) which will call the SAP EP APIs using web services.
We have developed a piece code (.par file) in net viewer Developer studio 2.0.9; we deployed /tested this .par file on to SAP EP6 SP2 successfully. Now, we need to test this .par file in SAP EP6 SP13 but we are not able to succeed in deploying this file like how we are doing it in SP2. After successful deployment of the PAR file we are unable to see the particular webservice in the webservices list.
For deploying the PAR file we followed the following navigation steps:
1.login into SAPEP as sapadmin.
2.click the systemadministrator tab.
3.click the support tab.
4. select the portalruntime link.
5.click on the AdministratorConsole link.
upload window will open where we upload the PAR file.
For checking the uploaded Webservices we followed the following navigation steps:
1.login into SAPEP as sapadmin.
2.click the systemadministrator tab.
3.click the support tab.
4. select the portalruntime link.
5.click on the soapadmin link.
In case of SP13, we are not able to see the uploaded webservices. But, when we deploy .par file it says deployed successfully (not throwing any errors).
Edited by: praveen bikumalla on Jan 21, 2008 7:38 AM

If we restart the services that is there in Systemconfiguration->servicesconfiguration->Applications i am getting the following error
Server 1337850:Error in the listener class com.sap.ip.portal.admin.portalanywhere.QueryHandler during the process of handleTopic.

Unable to see the pageviewer in a page from pages library in a custom page layout

<File Url="Inbox.aspx" Type="GhostableInLibrary" Level="Published" Path="myPages\Pages\Inbox.aspx" >
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="Header" ID="inboxwp1">
<![CDATA[<WebPart xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/WebPart/v2">
<Title>Inbox</Title>
<FrameType>Default</FrameType>
<Description>Displays another Web page on this Web page. The other Web page is presented in an IFrame.</Description>
<IsIncluded>true</IsIncluded>
<ZoneID>wpz</ZoneID>
<PartOrder>0</PartOrder>
<FrameState>Normal</FrameState>
<Height></Height>
<Width />
<AllowRemove>true</AllowRemove>
<AllowZoneChange>true</AllowZoneChange>
<AllowMinimize>true</AllowMinimize>
<AllowConnect>true</AllowConnect>
<AllowEdit>true</AllowEdit>
<AllowHide>true</AllowHide>
<IsVisible>true</IsVisible>
<DetailLink />
<HelpLink />
<HelpMode>Modeless</HelpMode>
<Dir>Default</Dir>
<PartImageSmall />
<MissingAssembly>Cannot import this Web Part.</MissingAssembly>
<PartImageLarge>/_layouts/15/images/mscntvwl.gif</PartImageLarge>
<IsIncludedFilter />
<Assembly>Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c</Assembly>
<TypeName>Microsoft.SharePoint.WebPartPages.PageViewerWebPart</TypeName>
<ContentLink xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">/_layouts/15/AppPages/InboxRedirectPage.aspx</ContentLink>
<SourceType xmlns="http://schemas.microsoft.com/WebPart/v2/PageViewer">URL</SourceType>
</WebPart>]]>
</AllUsersWebPart>
<AllUsersWebPart WebPartOrder="0" WebPartZoneID="LeftWP" ID="wpLeft">
<![CDATA[
<webParts>
<webPart xmlns="http://schemas.microsoft.com/WebPart/v3">
<metaData>
<type name="myWebParts.ProjectLinks.ProjectLinks, m, Version=1.0.0.0, Culture=neutral, PublicKeyToken=52f3214933d771f7" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">myprojectLinks</property>
<property name="Description" type="string">My Visual Web Part</property>
</properties>
</data>
</webPart>
</webParts>
]]>
</AllUsersWebPart>
<Property Name="ContentTypeId" Value="0x010100C568DB52D9D0A14D9B2FDCC96666E9F2007948130EC3DB064584E219954237AF390076F7B5D03DD146D699D042E1C5D76EF7" />
<Property Name="FileLeafRef" Value="Inbox.aspx" />
<Property Name="Title" Value="Inbox" />
<Property Name="PublishingPageLayout" Value="~SiteCollection/_catalogs/masterpage/myPageLayout/myPage.aspx, my custom Page Template"/>
<Property Name="ContentType" Value="myPageCT" />
<Property Name="_ModerationStatus" Value="3" />
<Property Name="FileDirRef" Value="Pages" />
<Property Name="FSObjType" Value="0" />
</File>
I have created a custom page layout in my site collec. using VS 2012 and deployed am able to see the page in the pages lib [inbox.aspx].
Here, I have added a page viewer web part and I want to redirect to another application page, which is already coded [inboxredirect.aspx] in my solution[its another dll - another SP solution which has appln pages and web parts
etc - ]
The issue is that, i am unable to see the page viewer web part when the page is displayed. inbox.aspx is a page which is created once my custompagelayouts solution is deployed and when i navigate to this page, i am stuck . i am getting
the " access denied " message is displayed.
can anyone help why this error is displayed?
in my inboxredirect.aspx page i am inherting from unsecuredlayoutspagebase class, so i dont think , access denied message should come.
using System;
using System.Configuration;
using Microsoft.SharePoint;
using Microsoft.SharePoint.WebControls;
namespace myproj.Layouts.AppPages
public partial class InboxRedirectPage : UnsecuredLayoutsPageBase
string projectName = string.Empty;
protected void Page_Load(object sender, EventArgs e)
string siteUrl = SPContext.Current.Web.Url;
using (SPSite site = new SPSite(siteUrl))
using (SPWeb web = site.OpenWeb())
string urlProjectName =Request.UrlReferrer.ToString();
projectName = urlProjectName.Split('/')[5];
//end
SPUser user = web.CurrentUser;
if (user != null)
above is my appln page to which i am redirecting.

Solved it myself guys... (Well the major part)
Got help from here...
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/blank-open-save-dialog-when-browsing-document-library-from-office-clients.aspx
and
http://www.sharepointconfig.com/2011/02/vs2010-list-definition-template-missing-file-dialog-view/
with some tweaks of my own..
Still working on it because its showing SharePoint 2010 header... And I need 2013 look...

Unable to see the application in BPM Workspace for Sales Quote tutorial

I have created the Sales Quote tutorial steps and deployed the process. The Enter Quote Details user task is in the "SalesRep" role and I have assigned a user from WebLogic user store to "SalesRep" role in the BPM Organization artifact.
In order to kick off the process, I logged-in to BPM workspace with the user I have assigned as "SalesRep" role but don't find the Sales Quote application under the "Applications" tab.
I am using 11g PS4(11.1.1.5) and didn't seed the demo users, instead just created the user using WLS console.
Any thoughts why the user is unable to see the application in BPM Workspace?
Thanks,
Satya

Check two things:
1. Login to Workspace as weblogic and click the Administration link at the top to verify the role is actually set to a user (just to double check this).
2. Login to EM, click the SalesQuote composite, scroll down and click the EnterQuote human task component, and click the Administration tab.
This shows you if there is a task form URI associated with this human task. If not, the initiate link won't show up in the Applications menu in Workspace.
If not, you can either deploy again from JDeveloper, making sure you have selected the task forms in the deploy wizard and making sure the deployment is successful in the Deployments log window.
Heidi.

Error (2931) VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.

Experts,
kindly advice for this error when create vm from a templates, while i'm not having this issue when create the vm to another host from the same templates,
firewall is disabled and no antivirus on the host.
The network and the ping is very stable, and the WS-Management service is running on the host,
Host : windows server 2012 R2
VMM : 2012 R2 3.2.7895.0
VMM updated from RU2 to RU5
Error (2931)
VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.
Unknown error (0x80338029)
Recommended Action
Ensure that the Windows Remote Management (WS-Management) service and the VMM agent are installed and running and that a firewall is not blocking HTTPS traffic.
This can also happen due to DNS issues. Try and see if the server (ms-lab-01.eccsolutions.local) is reachable over the network and can be looked up in DNS. You can ping the virtualization server from VMM management server and make sure that the
IP address returned matches the IP address locally obtained from the virtualization server.
If the error still persists, restart the virtualization server, and then try the operation again.
Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010.

Ok I will try another template,
and the drop happen in the customization after deploying the VHDX file as my first image.
I had this answer from partner forum. but i didn't try it yet
Backup your VMM database and then check the
tbl_VMM_Lock table in the
VMM database to see if it has any locks listed, do this after stopping the System Center Virtual Machine Manager Service.
If there are locks listed in the tbl_VMM_Lock
table you can clear them by executing the prc_VMM_ReleaseAllLocks
stored procedure.
Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010, Server Virtualization.

Error in Opening Worklist -"Unable to perform the request.............."

Hi,
On clicking on Worklist in portal, a user is getting the following error:
"Unable to perform the request. Try again. If the problem persists, inform your system administrator" error .
Any pointers will be of great help.
Please let me know how should I go about to solve this problem

You see this error in a lot of situations. Where exactly is this issue happening ? (clicking on item or clicking on attachment....)
Check the UWL log and post more details. You may choose to increase the log severity to ALL.
1. You may try to assign the user more authorizations and check if it fixes the issue.
2. Make sure that the work item is still valid in the corresponding backend system.
3. Based on your UWLJWF version - check for available SAP Notes
4. If you have not already implemented, try to implement sapnote_0001133821 - UWL Destination Service Configuration
5. Make sure that the user id validity is far enough in the future in the backend system
6. Upgrade to the latest support pack
Thanks,
Shanti

Unable to Compress the request of a Cube

Hi All,
I was trying to compress the cube data,At one request I got stuck. When ever I try to compress that request manually, but it is unable to compress the request and sends the following job logs
Job started
Step 001 started (program RSCOMP1, variant &0000000000190, user ID XXXXXX0006)
Performing check and potential update for status control table
No requests needing to be aggregated have been found in InfoCube 0XX_X01
Compression not necessary; no requests found for compressing
Compression not necessary; no requests found for compressing
Job finished
After further analysis, I observed the request which I am compressing , has an selective deletion.Since its is 2year old data I would like to compress the data,please suggest is it possible to compress,If the request has selective deletion.
please suggest.
Thanks & Regards,
Abdul

Hi Abdul,
Check that, if the cube that is being compressed feeds the data to a different InfoProvider, if yes then complete that laod first and then do the compression. this might be the reason sometimes. if the cube is not feeding anything currently try compressing the request again.
In some cases ,when the compression is manually performed (in the tab collapse of the cube) no compression would be done. In those cases you can try creating a process chain with only the compression step. This often solves the problem.
If both the above process don't solve your problem,
Try the SAP note :407230 (such problems occure after installing SP15.)
Regards,
Sudheer.

Not able to see the request in ODS to activate

Hi all,
I have a content ODS, i scheduled a infopack and the data came in thru ok. But inorder to upload the data into the cube, i know i need to activate it before. But when i rightclick and go to activate data in the context menu .. there is a popup which shows all the request id's in the ODS. but i'm not able to see my request to activate it ... Is there some flag has to be set inorder to see the requests in the activation list? once its activated, I think all i need to do is "UPDATE ODS DATA TO DATAPROVIDER" as it is a standard content. Is there something else i need to do ..Pls guide.
Now, I have a new problem, when i'm trying to see the transfer structure, it doesnt open and i get a msg
Transfer method 'TRFC with PSA' is not supported by the source system
Diagnosis
The PSA transfer method is used to transfer data from source system CRM to transfer structure 0xxx_xx_xx_I_BB. Source system CRM does not support a PSA transfer.
Procedure
Define the PSA in the source system.
Its actually a content one i installed and i didnt do any customizations to it... Shouldnt it work out of box? If no!! how can i define PSA in the source system.
Any help is appreciated.
Mav.

Hi Mave,
Kindly check the following:
1.) Are you sure that the loading process finished successfully in the ODS? Kindly ensure it did.
2.) Have you tried providing a longer <b>Date Range</b> in the <i>Request Display</i> (lower right).
--Jkyle

Unable to see the personalization link on any page

Hi,
I am unable to see the personalization link on any of my pages (not even on login page).
I am setting the profile option value to "Yes" for the profile option
FND: Personalization Region Link Enabled
Also I have bounced the Apache.
Please help me as I am stuck due to this.
Thanks,
Anoop

Did you enabled the profile option Personalize Self-Service Defn (FND_CUSTOM_OA_DEFINTION) .It must be set to Yes.
Abhay

Unable to see the request in Reconstruction Tab of Info Cube

Similar Messages

Maybe you are looking for