Unable to select a file

I am not sure what I am doing wrong, but when I create a Word file and then save it in documents, when I go to select it to email it to someone, it will not let me select the file. Does anyone no what I am doing wrong?
Thanks,
Randy

Hi,
Have you resolved this problem?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Unable to select .xltx file in Business Process Flow

Dear All,
I have created all my Input schedule and Reports in .xltx file (ie. MS2007 formet)
While defining action of the Business Process Flow,
I am selecting BPC for Excel and trying to browse file .xltx file (i.e MS 2007 formet),
but by defult I am getting only .xlt file (i.e. MS2003 formet). and system doesn't allow me to change default option (i.e all files option) of browsing.
Please advise.
Thanks,
Hardik

Try adding the extension to the "DEFAULT_EXTENSIONS" appset parameter.

Bluetooth transfer can't select multiple files

Hi,
I'm unable to select multiple files to transfer through bluetooth. Is there any way to transfer mutiple files. It's a pain to select each and every file and transfer...
Appreciate your response.
Solved!
Go to Solution.

@ vsai :
Do it properly man, I repeat,
Open gallery ---> swipe from down-----> tap on share option-----> and then select multiple files by touching them... and now tap share icon.
If you find difficulty let me know.

My bookmarks have disappeared and the 'restore' process is not working - Firefox is 'unable to load the file' I selected as the backup file.

Yesterday, I was unable to access Firefox at all and had to use another browser. Today, Firefox is back but all my bookmarks seem to have disappeared. I followed the procedure for restoring bookmarks from a backup file. I selected the file to back up from, but I received an error message saying that Firefox could not access that file.

Did you install the Places Maintenance extension and checked the places.sqlite database file?
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

KUP-04063: unable to open log file.. (while selecting from External table)

Hi
I am trying to craete an external table and then select the data from the table. However I am getting error while trying to select the data from external table.
SQL>CREATE OR REPLACE DIRECTORY my_dir as 'C:\arun';
Directory created.
SQL>GRANT ALL ON DIRECTORY my_dir TO PUBLIC;
Grant succeeded.
SQL>DROP TABLE proj_checklists_external;
Table dropped.
SQL>CREATE TABLE proj_checklists_external
2 ( checklist_submission_id NUMBER
3 ,Lead_reviewer_name VARCHAR2(30)
4 ,Lead_reviewer_corp_id VARCHAR2(10)
5 ,creation_date VARCHAR2(10)
6 ,submitted_dater VARCHAR2(10)
7 ,approved_date VARCHAR2(10)
8 ,status VARCHAR2(50)
9 )
10 ORGANIZATION EXTERNAL
11 (
12 TYPE ORACLE_LOADER
13 DEFAULT DIRECTORY my_dir
14 ACCESS PARAMETERS
15 (
16 RECORDS DELIMITED BY NEWLINE
17 FIELDS TERMINATED BY ','
18 )
19 LOCATION ('Book1.txt')
20 )
21 PARALLEL 5
22 REJECT LIMIT 200;
Table created.
SQL>SELECT * FROM proj_checklists_external;
SELECT * FROM proj_checklists_external
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: unable to open log file PROJ_CHECKLISTS_EXTERNAL_28484.log
OS error No such file or directory
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
I craeted an file PROJ_CHECKLISTS_EXTERNAL_28484.log also in C:\arun and then tried to select but still got same error.
Any idea how to overcome this error.
Regards
Arun

here you go:
SQL> CREATE OR REPLACE DIRECTORY GRATIS_LOAD as 'D:\AdvSourceData\Membership\';
Directory created
SQL> GRANT ALL ON DIRECTORY GRATIS_LOAD to ADVROLE;
Grant succeeded
SQL>
SQL> DROP TABLE MEMB_BATCH_LOAD_ID;
Table dropped
SQL> CREATE TABLE MEMB_BATCH_LOAD_ID (
2 ID_NUMBER VARCHAR2(10),
3 STATUS CHAR(1)
4 )
5 ORGANIZATION EXTERNAL
6 ( TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY GRATIS_LOAD
8 ACCESS PARAMETERS
9 ( records delimited by NEWLINE
10 fields (
11 ID_NUMBER POSITION (1:10) CHAR,
12 STATUS POSITION (11:1) CHAR
13 )
14 )
15 LOCATION
16 ( 'GRATISID.TXT'
17 )
18 );
Table created
SQL> select * from memb_batch_load_id;
select * from memb_batch_load_id
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: unable to open log file MEMB_BATCH_LOAD_ID_1388_5552.log
OS error The system cannot find the file specified.
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1
SQL>

When downloading a file, I select "Save File", but I'm unable to check the box label "Do this automatically for files like this from now on." The box is faded out. It's very tedious when you have to select "Save File" everytime

Click on the file to download
The "Open" Dialog Box pops up
Select "Save File"
Try to click on the box labeled ""Do this automatically for files like this from now on."
The box is disable

Hello melanie90, see : [https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file#w_changing-download-actions Changing download actions]
thank you

I am unable to open video files on this website.

When I click on video links of the following website--http://tubtub.com/--I receive an error message that reads as follows:
"File not found
Firefox can't find the file at mms://TITLE.tubtub.com/.
Check the file name for capitalization or other typing errors.
Check to see if the file was moved, renamed or deleted.
Try Again"
I had initially seen a window that was named "Launch Application," which, seemingly, allowed one to choose an application by which to open the video links. I chose my VLC player to do this and checked a box to associate this "Launch application" window with the VLC player, but received an error message that VLC was unable to open the file that began with an "mms" URL. Then I was never able to get back to that "Launch application" window to select another application, such as Windows Media Player, Real Player, etc. I even tried uninstalling my Firefox browser and the VLC player and reinstalling them both, all to no avail.
Please explain how I may get these video links to play and the "Launch Application" window to open again. I recall having used TubTub.com successfully before.
Thank you.

Hi mendcocr,
Please see this document about configuring web browsers to display PDF files: http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html.
Please let us know if you need additional help.
Best,
Sara

Unable to edit Hosts file in Win7 Home Prem 64bit.

Clean install. Administrator account. Unable to edit the permissions of the hosts file. There is one in the drivers\etc file, which I cannot edit. There is supposed to be one in %systemroot% \SysWOW64\drivers\etc but there is no etc folder in the drivers folder.
Turned off DNS Server. gpedit.msc not found when calling it in "run". This is the first time I've used 64bit anything, so a bit of a newb in that respect.
Any ideas?

Hi,
As you would know, some of the Windows 7 users can’t save the host file how they like it. The host file itself will simply vanish what the user had done with it.
In my scenario, I was unable to fix this even after all the instructions provided in above posts. Hence, I have come up with my own idea and luckily it
worked.<o:p></o:p>
For those users who experience this problem, here are the instructions to fix it.
First of all, you should have the administrative privileges to edit the host file. In normal case, if an admin user directly go to the host file in system 32 and add his preferences
and then save it, it should keep the changes. However, in some wicked scenarios, it will not. I had done a detailed research on this through all the available online forums and even contacted Microsoft several times with no luck.
So, here you go with a correct solution for this problem.
Note: If you are not comfortable with Windows OS and don’t know what you are doing, this process can mess up things.
Hence, do not attempt if you are not 100% sure you can make it.
Login to an administrator account.
In the run command (Windows key + R) type, “control folders” and hit enter.
Click on the tab called view.
Select the radio button for Show hidden files, folders and drivers –ON.
Uncheck the ‘Hide extension for known file types-ON
Click on Apply and then OK.
Type “drivers” in run command and hit enter. It will take you to where the folder “drivers” located in System 32.
From the “drivers” folder, double click the folder named “etc.”
Now you can see the “host” file along with others.
Now, in the search area in start menu, type “notepad.exe” and open the notepad.exe as administrator. (In order to do this, you can right click on the notepad.exe shown and select
“Run as Administrator.” If UAC prompted, click YES/OK)
Now, you will have a notepad open with administrative privileges.
At the top left side of the notepad click on “file” and then select “Open.”
A box will appear which will allow you select the file to open. Carefully, navigate to the location where the “host” file is located. To do that, select the drive where you
installed Windows. If you have the Windows installed in C: select ‘Local Disk (C :)’ > Windows > System 32 > drivers > etc. At this point, you might not have another option to proceed or select from. The window would be empty. To proceed further,
select the option “All files” from the drop down menu which is located above the “Open” and “Cancel” button. You can now see all the files located in etc folder.
Select “hosts” from the menu and click on “Open.” Note: You can either click on open or double click on the file.
Now, you will have the host file information open in the notepad which you had already initiated before with administrative privileges.
Make whatever changes you as you wish. (Example: If you need to block a web site called
www.block123.com you can type 127.0.0.1
www.block123.com right under the local hosts.
Make sure you do not change any other letters or characters which are already saved in host file.
This will completely mess up your computer. For more information on the information about host file, refer the Microsoft web site:
http://support.microsoft.com/kb/972034 . If you
have accidently delete/edit anything from host file, please delete the complete information stored in host file and copy and paste the host file information from Microsoft which is appropriate for your Operating System.)
Click on “file” again and select “Save as” and save it in etc. If the path is showing correct to etc folder, save it to etc. If it is navigated to somewhere else, follow the
instructions provided above and select etc folder and then save it.
Now, go back to the actual host file location which is in System32 > Drivers > etc (You would have it already open if you had followed the instructions just like the way
I have provided)
There you can see 2 host files. One which has already been there and the other one you just saved.
Among the two, one is called “hosts” and the ‘type’ would be ‘file.’ This is the original host file. The other which you have just saved will be named as “hosts.txt” with the
file type as ‘Text Document.’
Right click on the original host file and select rename. You can even click on that file and press F2. This will enable the option to rename the file. Rename the original host
file as “hostold” and hit enter.
Now, select the second host file which we have saved as a text document and rename it as “hosts.” Make sure that you DELETE the .txt file extension in order to change the type
“Text Document” to “File” and hit enter.
Now, you have successfully saved the host file with your preferences.
You can now delete the file which we renamed as “hostold.”
We are done. You would need to do this process all over if you need to edit the host file again. I know it is difficult, however, it is our own requirement and we have to invest
few minutes on this.
Enjoy your computer with a great feeling that you have finally edited the host file as per your wish and take it from here. Wish you luck.
Should you have any questions, please feel free to ask.

EhP1 - Unable to create XML file in Solman

Hi all,
I need some assistance
I am trying to upgrade our XI system to EhP1 - SP04. I use Maintenance Optimizer in our Solution Manager (SAP EHP 1 for SAP Solution Manager 7.0) to select the necessary files for my upgrade. The XI system has been set up in SMSY an given a Logical Component. Also, added to the Solution Landscape. I use the SAPehpi-installer to upgrade XI.
However, when I get to section three, I am supposed to provide the SMSDXML.xml file. This file is not created by our Solution Manager for some reason. The file, as I understand it, is supposed to be generated automatically during Maintenance Optimizer. But when I check the EPS and EPS/in folder of our solman, the file is not to be found. I have also checked the parameter DIR_EPS_ROOT in RZ11. It is correct. The authorization has been set to full on group Everyone, just to check if that could be the problem, but with no luck.
When I use transaction /n/tmwflow/mopz_stack i am able to view the XML file (I assume that it is the correct file), but any attempt to copy the text displayed, and to save it as an XML-file has not resulted in any success.
The only thing I have to go on, is a warning displayed in Maintenance Optimizer, stating: "Warning - No SLM configured in system - <SID>. Every document etc, Iu2019ve read sais that one can use Software Lifecycle Manager as an alternative to Download Basket. I havenu2019t seen SLM listed as a prereq, so I donu2019t believe that this could be the reason why the XML-file is not generated.
Is there some setup/configuration Iu2019ve missed?
Any help will be much appreciated!
Best Regards,
Stian
Notes checked:
1134872 FAQ for stack Delta Files
1022704 Upgrade phase EHP_INCLUSION and SPSTACK_REQUEST
1277035 Solution Manager: EHP4 product data missing

I downloaded the SPSTab.xml from SMP, but it didnt work. It gave an error: "The selected configuration file ("C:EHP1SPSTab.xml") is not usable. Reason: "Stackfile not found""
I have used the dockument in the link you provided as a basis for my upgrade. So I still need this to work in order to upgrade my XI Netweaver 7.0 to Enhancement Package 1...
In the document you provided:
Section 3 SAP Solution Manager
3.1 Support Package Level of SAP Solution Manager (Check - Mine is EHP1)
3.2 System Landscape (SMSY) of SAP Solution Manager (Check - as stated above in opening post)
3.3 SAP Solution Manager Maintenance Optimizer (Check)
3.4 SAP Solution Manager Troubleshooting: (Check)
3.4.4 No Stack Configuration File is generated: This is the core of my problem... I have read the notes listed, and run the IMG activity under Maintenance Optimizer, as per note 1134872. I get an warning stating "SAP ChaRM auto-configuration warnings" This could be the source of the problem, but in the thread Re: Message no. IMG_FASTCONF028 in Charm SolManiac says that it is nothing to worry about.
So to summarise:
I an still unable to generate XML file in Solman, and I am uable to get the XML downloaded from SMP to work with SAPehpi.
BR
Stian
(EDIT: I am however not shure if the settings under SMSY etc are 100% correct, but in my mind, that should prevent Maintenance Optimizer from generating the XML file)
Edited by: Stian Eiken on Jul 13, 2009 1:18 PM

B2b unable to pick the file from xml gateway

Hi All,
I am taking a scenario where B2B picks the files from xml gateway and drop the files in FTP folder. I modified the XML gateway inbound and outbound, i has given my user credentials(unmae, host ,pwd ,sid, port). In agreement in the place of internal delivery channel i has given XML gateway outbound.
Still its unable to pick the files from xml gateway.
Clarify my understanding please
While b2b picks the files from xml gateway, It will pick from ECX_Inbound or ECX_Outbound?
Here i am attaching the logs:
2010.01.15 at 07:32:51:101: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
2010.01.15 at 07:32:56:366: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
2010.01.15 at 07:32:56:369: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
2010.01.15 at 07:32:56:392: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration obtained
2010.01.15 at 07:32:56:395: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
2010.01.15 at 07:32:56:547: B2BStarter thread: B2B - (DEBUG) XEngine not running. So no need to clear cached objects inside XEngine.
2010.01.15 at 07:32:56:821: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
2010.01.15 at 07:32:56:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
2010.01.15 at 07:32:56:826: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
2010.01.15 at 07:32:56:829: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
2010.01.15 at 07:32:56:832: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] RosettaNet over RNIF
2010.01.15 at 07:32:56:835: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] EDI X12 over Generic Exchange
2010.01.15 at 07:32:56:837: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
2010.01.15 at 07:32:56:840: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
2010.01.15 at 07:32:56:842: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
2010.01.15 at 07:32:56:845: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
2010.01.15 at 07:32:56:848: B2BStarter thread: B2B - (INFORMATION) Repository:print: [10] Custom Document over Internet
2010.01.15 at 07:32:56:851: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over ebMS
2010.01.15 at 07:32:56:853: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
2010.01.15 at 07:32:56:856: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
2010.01.15 at 07:32:57:649: B2BStarter thread: B2B - (DEBUG) Repository:constructCertSQL SELECT cert.ID, cert.CLASSTYPE FROM TIP_Certificate_ra cert, TIP_Party_ra party, TIP_DocumentExchange_ra docex WHERE cert.ID = docex.signingcredential AND cert.tradingpartner = party.ID AND party.ishosted != 'Y'
2010.01.15 at 07:32:57:785: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
2010.01.15 at 07:32:58:077: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
2010.01.15 at 07:32:58:824: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
2010.01.15 at 07:32:58:827: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
2010.01.15 at 07:32:58:831: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
2010.01.15 at 07:32:58:891: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
2010.01.15 at 07:32:59:010: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
2010.01.15 at 07:32:59:013: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
2010.01.15 at 07:32:59:038: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
2010.01.15 at 07:32:59:041: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
2010.01.15 at 07:32:59:043: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
2010.01.15 at 07:32:59:046: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Initialize Transport Logger.
2010.01.15 at 07:32:59:059: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = ERROR
2010.01.15 at 07:32:59:294: B2BStarter thread: B2B - (DEBUG) Repository:Repository:getDeliveryEndPointList() Wallet Location /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
2010.01.15 at 07:32:59:297: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: No Archive dir
2010.01.15 at 07:32:59:300: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: marker :false
2010.01.15 at 07:32:59:314: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO
2010.01.15 at 07:32:59:322: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: ftp://elshad1.emerson.com//ftpdata/elshad1/ice/infile/850/PO file.receiver.wallet_location = /apps/elshad4/aelshad4/elshad4_OracleB2B/Apache/Apache/conf/ssl.wlt/default/ewallet.p12
file.receiver.wallet_password = *****
file.receiver.polling_interval = 5
file.receiver.path = /ftpdata/elshad1/ice/infile/850/PO
file.receiver.marker = false
marker = false
ccc = false
file.receiver.channel_mask = None
file.receiver.minimum_age = 0
filename_format = %FROM_PARTY%_%TIMESTAMP%.dat
file.receiver.van = false
file.sender.channel_mask = None
file.receiver.user = eiced1
PROTOCOL_ENDPOINT = null
file.receiver.password = *****
file.receiver.preserve_filename = false
transport_callout_waittime = 30
preserve_filename = false
file.receiver.ccc = false
van = false
polling_interval = 5
2010.01.15 at 07:32:59:491: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Emerson_Robin_FTP_TransportServer < ftp > < Emerson >]
2010.01.15 at 07:32:59:858: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize Initialize AppTransport Logger.
2010.01.15 at 07:32:59:864: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = ERROR
2010.01.15 at 07:32:59:949: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Outbound - initialize
2010.01.15 at 07:32:59:953: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 Obtaining outbound connection...
2010.01.15 at 07:32:59:956: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
2010.01.15 at 07:32:59:960: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:32:59 GMT+00:00 2010 outbound username: apps
2010.01.15 at 07:33:04:319: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 07:33:04 GMT+00:00 2010 Outbound - initialize exit
2010.01.15 at 07:33:04:322: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2010.01.15 at 07:33:04:326: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2010.01.15 at 07:33:04:329: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.01.15 at 07:33:04:332: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.01.15 at 07:33:04:335: B2BStarter thread: B2B8:15:32:157: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:32 GMT+00:00 2010 inbound username: apps
2010.01.15 at 08:15:33:757: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 inbound initialize exit
2010.01.15 at 08:15:33:761: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Outbound - initialize
2010.01.15 at 08:15:33:764: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 Obtaining outbound connection...
2010.01.15 at 08:15:33:767: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound connect string: jdbc:oracle:thin:@essdbdu31.emrsn.com:36001:ROBIND1
2010.01.15 at 08:15:33:770: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:33 GMT+00:00 2010 outbound username: apps
2010.01.15 at 08:15:34:473: B2BStarter thread: B2B - (DEBUG) : Fri Jan 15 08:15:34 GMT+00:00 2010 Outbound - initialize exit
2010.01.15 at 08:15:34:476: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2010.01.15 at 08:15:34:479: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2010.01.15 at 08:15:34:481: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.01.15 at 08:15:34:484: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.01.15 at 08:15:34:487: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
2010.01.15 at 08:15:35:928: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2010.01.15 at 08:15:36:132: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages
2010.01.15 at 08:15:36:139: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
regards
cnu

Anuj,
The log which i placed on top, thats the complete log and DC log is given below
2010.01.18 at 12:58:06:117: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:11:130: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:16:143: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:21:153: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:26:169: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:31:164: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:36:173: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:41:182: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:46:194: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:51:210: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:58:56:217: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:01:244: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:06:254: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:11:256: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:16:283: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:21:276: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:26:285: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:31:297: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:36:314: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:41:324: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:46:327: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:51:341: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 12:59:56:352: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered.
2010.01.18 at 13:00:01:359: Thread-14: (ERROR) FTPClient.listNames(): unexpected 550 is encountered

Unable to view PDF files in Infoview

I am unable to view pdf files in InfoView (Business Objects Edge Series XI 3.0)
When I select the pdf file from Infoview, I receive the message 'Do you want to save this file' which only allows me to save the document to a location on my computer.
Other users can view the file in Infoview, so it probably relates to a setting on my computer.
Any ideas?
Thanks

I've had a little look on Adobe's knowledge base; try this to check whether the issue is related with opening PDF in your browser in general:
"Determine if the web browser can open the PDF file from your local hard drive rather than from the web:
In the web browser, choose File > Open (or Open File).
Choose All Files from the Files Of Type pop-up menu (Windows)
Click Browse
Select the PDF file you saved in step 1 of task 5, and then click Open to open the PDF file. If Acrobat or Adobe Reader displays the file, but won't display it on the web, the web server has a problem serving the PDF file. Contact the webmaster of the site from which you downloaded the PDF file."
If so, try the troubleshooting steps mentioned here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328233&sliceId=2

When i drag and drop an image on my site. it gives the following error. "Unable to access local files due to browser security settings. To overcome this, follo"

I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
Thanks.

Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons.

Unable to upload multiple files

In MOSS, I am unable to upload multiple files from the Site Actions | Manage Content and Structure | New | Item menu. I have tried adding Word documents and image files (JPEG, GIFS) to no avail into the \images or \document folders. Even if I try just one file, three or five, the menu never initiates or progresses. It just sits. If I cancel, the menu returns immediately. I have tried to change security settings with no success. Trying to upload multiple files on different MOSS installations also fails. If this is related to a Web Dev settings, can you tell me exactly where the setting is? Thanks for your insight. cm

Believe it or not, I have found a solution after about 4hrs of fiddling around. This appears to be a bug in Sharepoint 2007. There is a work around that I have discovered! Follow the steps below and let me know if this works for you. It has worked for me and other people so far.
The steps are as follows:
1) Browse to your website at http://<servername>/_layouts/settings.aspx; you will need to login by providing a service account name & password or your site collection administrator account & password.
2) Once you login, click on 'Site Actions' menu.
3) Then, click on 'Manage Site Content and Structure'.
4) Click on any document library you want to upload or add files into. If you do not see the 'Upload' menu from the dropdown main menu between the 'New' and 'Actions' menu then you have this bug as well showing up on your server. Don't give up yet, there is a solution. Keep going through these steps!
5) Click on 'New' and select 'Item'.
6) You should now see the Upload Document page; under the input browse field there should be a link for 'Upload Multiple Files...', if you do not see this you will need to install either Office 2003 or Office 2007. If you do see it, click on it.
7) Now, you should see the multiple upload page that allows you to select multiple files. If you try to select one or several and click on the OK button, nothing will happen. No need to worry! There is a work around. Just keep reading to the next step.
8) On the hierarchy navigation you will have links something like this:
WebSiteName > Folder1 > Folder2
9) Click on the "Document Library" folder name; in our case it was Folder1. Basically its the folder you ended up in in step #4.
10) Now, did you notice anyting in your menu change? Now you should be able to see the Upload menu option between the 'New' and 'Actions' menu that you could not see in step #4.
11) Click on the 'Upload' menu and select 'Upload Multiple Documents'
12) Now, you will be back at the Upload document page where you were in step #7
13) Select one file or many and then click OK. Now it works!!! You should get an IE popup asking you that your about to upload files to your site, Click OK.
VOILA!!!
Don't ask me why, I do not know why this happens but it works.

JDeveloper v10.1.3.0 - Debugging Mode - Unable to fiind source file

I just upgraded to a newer (10.1.3.0) version of JDeveloper.
When I'm stepping through Java code in the debugger and I need to step into code that is in another project, I get a dialog box telling me "Unable to find source file".
The dialog box has four radio buttons and in the past, I chose the "Look for the file in project: " which had a drop down box where I could select the project that the Java file was in.
With the new vesion, this does not work. I have to select the second option, which is "Let me find the file myself with the open file dialog".
This latter method works, but it is much more time consuming than the former. Has anyone else noticed this problem before and found out a way to fix it?
Thanks in advance for any help on this matter.
Greg

Just some more information from me, the original poster...........
When I try to do the remote debugging....
Under the project's Run Configuration, Launch Settings, I check the "Remote Debugging and Profiling"
Under Debugger, Remote, I select the "Listen for JPDA
Then I select the project and chose "Start Remote Debugger"
Then I set a breakpoint in the PL/SQL
Then at the SQLPLUS command line, I enter "exec DBMS_DEBUG_JDWP.CONNECT_TCP( '127.0.0.1', 4000 );"
Response from SQLPLUS is:
BEGIN DBMS_DEBUG_JDWP.CONNECT_TCP( '127.0.0.1', 4000 ); END;
ERROR at line 1:
ORA-12571: TNS:packet writer failure
===========================================================
When I try debugging locally............
I uncheck "Remote Debugging and Profiling"
In Run Config, Debug, Remote, I select Attach to OJVM as the protocol
I then select the PL/SQL function that I would like to debug and select "Debug"
Here are the results from JDev....
Connecting to the database QF.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: ALTER SESSION SET PLSQL_COMPILER_FLAGS=INTERPRETED
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '127.0.0.1', '3263' )
ORA-30683: failure establishing connection to debugger
ORA-12541: TNS:no listener
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
Process exited.
Disconnecting from the database QF.
=========================================================
Any help would sure be appreciated.
Thanks,
Greg

Unable to select the created Ports(greyed out) in the import manager

Hi ,
We have created some ports with specific Remote system and XML schema's and also assigned the map to it.
The processing type is manual for now,since we want to load data manually using import manager from the Ready folder of the port since PI is dropping the files there.But when I load import manager and select the file type as "Port" and also the relevant remote system ,I cannot select any of the list of ports created ,All are greyed out.
All I need is to select "Port" option ,remote system and use the created port from the dropdown list of import manager " connect to source" step,which i am unable to select as all the port s are greyed out and unable to select.
Any help greatly appreciated...

Hello Arvind,
There is no need to start the MDIS (Import server) if you are importing the data manually.you just open the import manager, login into the repository and select type as XML as per your case and select the remote system (it depends on your requirement) and select the port on which your xml files resides.and enter in the import manager then map you data accordingly and you can import into the repository.
when you want to automate the process for importing the data in repository then you will need to Start the import Server. In that case import server automatically pick the file from the ready port folder and also set the property in console as the processing type is Automatic.
Hope this will help you and clear your doubt.
TNR,
Saurabh...
Reward if found helpful.

Unable to select a file

Similar Messages

Maybe you are looking for