Unable to select any row(s) in table/ALV

Hi ,
I am having a problem while selecting a row in a table/ALV.
I am displaying data in a table which is NOT set to 'Initialize lead selection' in the context.When it is displayed and I try to select a row the row does not get selected(highlighted) in the view.
However,I am able to perform tasks on 'Onselect' event on the rows.Just that its not getting highlighted neither in table nor in ALV.
What could be the reason for this ? I do not want the context element to be set as 'Initialize lead selection' as that would highlight the first line of the table when the view is rendered first time.
Thanks for your help,
Sandip.

hi sandip,
Try this method
lo_table_sett TYPE REF TO if_salv_wd_table_settings.
lo_config_tab TYPE REF TO cl_salv_wd_config_table.
lo_config_tab = lo_ref_interface_controller->get_model( ).
lo_table_sett   ?= lo_config_tab.
lo_table_sett ->SET_SELECTION_MODE( value ).
value- '00' for auto
         '02' for single
         '04' for multi
         '06' for none
         '07' for singleNolead
         '08' for multi Nolead
Regards,
janakiram

Similar Messages

Enable Buttons after selection of row in a table

Hi All
Could any one give me help in this. I have a table, in table tool bar some buttons are there. at first time buttons are in disable mode, when user select any row in the table the buttons should be in enable mode. how to do this? help me
Thanks,
kris.

hi,
for table you have lead select action. you can write the code in this ction method to enable and disable the buutons based on the lead selection.
or you ca alsoput your code in modify view and check if the instance of element is bound then enable else disable,
lo_element = lo_node->get_element(). Lo_element will be bound only if there is a lead selection in the table.
if lo_element is bound.
enable the buttons.
else.
disable the buttons.
endif.
Regards,
Madhu

Error after using a servlet in ADF - unable to select another row in table

Hello,
I have a go button and when I select a row in a table it call a download servlet. After I open or save the document I'm unable to make other selection in the table or make another action.
The table has single row selection active.
The servlet make part from a task-flow.
Here is the code for the sevlet and my jdev version is 11.1.1.2.0
public class DownloadServlet extends HttpServlet {
@Override
public void init(ServletConfig config) throws ServletException {
super.init(config);
public void doGet(HttpServletRequest request,
HttpServletResponse response) throws ServletException,
IOException {
String id= null;
String den= null;
InitialContext ic;
try {
ic = new InitialContext();
} catch (NamingException e) {
DataSource ds = null;
Connection conn = null;
PreparedStatement cStmt = null;
ResultSet rset= null;
byte[] bdata = null;
String rezult_null = "";
id_fisier_lcl = request.getParameter("id");
den_fisier_lcl = request.getParameter("fileName");
rezult_null = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n" +
"<Body>Fisierul a fost arhivat</Body>";
try {
ic = new InitialContext();
ds = (DataSource)ic.lookup("jdbc/ConnDS");
conn = ds.getConnection();
cStmt = conn.prepareStatement("commit");
cStmt.execute();
conn.commit();
cStmt= conn.prepareStatement("SELECT a.item FROM table a WHERE a.id = " + id);
rset = cStmt.executeQuery();
if (rset.next()) {
weblogic.jdbc.wrapper.Clob clob =
(weblogic.jdbc.wrapper.Clob)rset.getClob("content");
oracle.sql.CLOB oclob = (oracle.sql.CLOB)clob.getVendorObj();
bdata = new byte[(int)oclob.length()];
InputStream is = oclob.getAsciiStream();
is.read(bdata);
rset.close();
cStmt.close();
} else {
bdata = new byte[(int)rezult_null.length()];
bdata = rezult_null.getBytes();
rset.close();
cStmt.close();
} catch (NamingException e) {
} catch (SQLException e) {
String username_lcl = null;
username_lcl =
ADFContext.getCurrent().getSecurityContext().getUserName();
OutputStream outputStream =response.getOutputStream();
String mimetype = "";
FacesContext facesContext =FacesContext.getCurrentInstance();
response.setContentType( (mimetype != null) ? mimetype : "application/x-download" );
response.setHeader( "Content-Disposition", "attachment; filename=\"" + den_fisier_lcl + ".xml\"" );
try {
outputStream.write(bdata);
outputStream.flush();
outputStream.close();
catch (Exception e) {
e.printStackTrace();
FacesMessage msg =
new FacesMessage(FacesMessage.SEVERITY_ERROR, e.getMessage(),
facesContext.addMessage(null, msg);
How can I fix it?
Thank you.

Hi,
have you seen this ?
http://download.oracle.com/docs/cd/E21764_01/apirefs.1111/e12419/tagdoc/af_fileDownloadActionListener.html
If you want to continue with your approach, then a way out of your problem could be to add an af:clientListener onto the command button. The JavaScript function would be
function onDownload(evt){
evt.noResponseExpected();
}Frank

Select all rows in af:table

Hi,
I need to select all rows in af:table, not only on current page.
I have following code on custom select all action:
getTable2().getSelectionState().addAll()and on button that needs to perform some action on selected rows I have this code
        Set selectedRowSet = getTable2().getSelectionState().getKeySet();
        if (!selectedRowSet.isEmpty()) {
            Iterator it = selectedRowSet.iterator();
            while(it.hasNext()) {
                Key key = (Key)it.next();
       }selectedRowSet.iterator() method throws java.lang.ClassCastException: oracle.jbo.Key.
When I select rows with af:tableSelectMany, which is inside selection facet and selects only rows on current page, this works fine.
Any ideas?
Thanks

Hi,
you can only access those data that is queried and part of the CollectionModel to the time you select all
   RichTable _table = employeesBackingBean.getEmployeeTable1();
   RowKeySet rks = new RowKeySetImpl();
CollectionModel model = (CollectionModel)_table.getValue();
int rowCount = model.getRowCount();
      for (int i = 0; i < rowCount; i++) {
           model.setRowIndex(i);
           //note that in the simple POJO case, the row key is the same
           //as the index. However, it would be wrong to just rely on this
           //because other models or custom table models my return a more
           //comples key. Therefore we iterate over the available rows to
           //obtain the keys.
           Object key = model.getRowKey();
           //add the row keys to the RowKeySet to mark selected
           rks.add(key);
   _table.setSelectedRowKeys(rks);
   AdfFacesContext.getCurrentInstance().addPartialTarget(_table);Frank
Frank

Selecting multiple rows in a table

Hi All,
I have one problem with selecting multiple rows in a table.I tried with setting table property-selectionMode as Multi, but i dinn't get the solution.
please provide me solution for this.
Thanks & Regards,
Sreelakshmi.

HI
Int leadSelection = wdcontext.nodemodelnode.getLeadSelection();
for(int i=0;i<wdcontext.nodeModelNode.size;i++)
    if(wdcontext.nodeModelNode.isMultiselected(i) || leadSelection ==i)
           String name = wdcontext.nodemodelnode.getnameelementatindex(i).getName();
           String address = wdcontext.nodemodelnode.getaddresselementatindex(i).getAddress();
           String age = wdcontext.nodemodelnode.getAgeelementatindex(i).getAge();
        Create a method for the Table Property onLeadSelect() where you can open a popup window
         Create a value node and with attributes same as Table attributes and then set the values of the table
         to the value node attributes.
Thanks

Dynamic Select of Row in a table in webdynpro Abap

Hi,
I have an requirement, I have an table and a button, I need to select a row in a table based on button action.
For example : in a table i have 3 rows. I am submiting a value in a button, I want to see that row highlighted for the value I am sending through button.
Please let us know the code how to implement this.
Thanks

Hi,
First you have to go to table and set its property "SELECTION MODE" to single or multi lead depending on ur need.
Then in the ACTION of the button you can use the following code to get the values in the selected row.
DATA:
     node to get table node for finding no. of rows
        lo_nd_one TYPE REF TO if_wd_context_node,
     Get selected row for finding no. of rows
   it_table               TYPE        wdr_context_element_set,
     workarea to get selected row
        wa_table                LIKE LINE OF           it_table,
To get the Selected line item into an internal table
CALL METHOD lo_nd_one->get_selected_elements
    RECEIVING
      set = it_table.    " data in internal format
IF it_table[] IS NOT INITIAL.
type conversion for work area
    READ TABLE it_table INTO wa_table INDEX 1.
if a row is present
    IF sy-subrc IS INITIAL.
    Get the values of each attribute
      CALL METHOD wa_table->get_static_attributes
        IMPORTING
          static_attributes = wa_final.       "<Selected data in work area.> ---> this will have your data
    ENDIF.
Here wa_final is the work area which is of your table fields type.
This wa_final will have the selected row.

Select a row from a table and throw an url

Hi experts,
I'm trying to select a row from a table in Visual Composer. What I need to do it's to click over this row and throw an Url. At the moment, I've added a column with a Pushbutton with the formula to show the link; it works fine. But I need to do it without buttons just selecting the row.
Is there anyboby who knows about that?
Thanks a lot.
Belen

Hi
To do this you will have to use a data store and a guard condition on the line which is triggered by the select action. You need to store a value in the data store each time a select action is performed. The guard condition should check for this and only perform the action when the value in the data store is greater than 0.
Jarrod Williams

Select multiple rows from dual table

Is it possible to select multiple rows from dual table using a single select statement.
i.e., i want the out put to be
column_name
1
2
3
4
Edited by: vidya.ramachandra on Dec 14, 2009 8:24 AM

Aside from the fact you're responding to an old thread...
1002424 wrote:
While using CONNECT BY, I see it always leave behind one row.
Suppose I have a condition based on which I have to generate constant rows like
SELECT 1 FROM DUAL WHERE ROWNUM < N;
Here if N = 0, still it gives out single row.... you are obviously doing something wrong in your code elsewhere, because that SQL statement does not always return a single row...
SQL> SELECT 1 FROM DUAL WHERE ROWNUM < 0;
no rows selected
SQL>

TS1702 my apps store screen won't move off Newstand. I am unable to select any options eg; updates

My apps store screen seems to be frozen on Newstand. I am unable to move from this section. I an unable to select any other alternatives eg; when I select updates nothing happens. When I select select categories nothing happens.

Try closing the App Store app completely and see if it works properly when you re-open it : from the home screen (i.e. not with the App Store 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I am unable to select any 3D options in PhotoShop cc. Can anyone tell me why?

I am unable to select any 3D options in PhotoShop CC. Can anyone tell me why?

If on a Mac, It's in Preferences > Performance, if using Windows, Edit > Preferences > Performance
This should be checked on.
This should be at least 512 MB

Easy Question:Select many rows from a table and execute BAPI for these rows

Hi Experts,
I have created one WD project. The WD project fetches some records of backend using BAPI and displays in a table. I have to select some rows from the table and then execute BAPI for selected rows.
How I can select multiple records from the table and then execute another BAPI for selected rows.
Regards,
Gary

Hi,
In the Node which you binded to the table create one more attribute of type boolean.
For example your node is as below:
//Table Node
TableNode
> Att1
> Att2
> isSelected(boolean) - Newly created attribute for this requirement.
//Result Node contains the elements selected in TableNode
ResultNode
>Att1
>Att2
Now in the table create one more Column with Checkbox as tablecell editor. Now bind this boolean attribute to that check box.
Now in the code you can get the selected rows by user as below:
for(int i=0;i<TableNode().size();i++)
if(wdContext.nodeTableNode().getTableNodeElementAt(i).getIsSelected()==true)
    IPrivateTestView.IResultNode element=wdContext.createResultNodeElement();
    element.setAtt1(wdContext.nodeTableNode().getTableNodeElementAt(i).getAtt1());
    element.setAtt2(wdContext.nodeTableNode().getTableNodeElementAt(i).getAtt2());
   wdContext.nodeResultNode().addElement(element);
Regards,
Charan

Selecting multiple rows of a table

Hi Forum,
How to select multiple rows of a table at a time? Please help me..
Thanks
Swapna

Hi Swapna,
To select more then one row in table, just set the selectionmode property of table to 'multi' or 'auto' and also change the selection property of the node (to which table is binded) to 0:n.
I hope it helps.
Regards
Arjun
Edited by: Arjun on Feb 4, 2009 11:52 AM

Select discontiguous rows in a table with the keyboard

I am using jdk 1.3.1 and have tried this on 1.4 as well. I don't seem to be able to select discontiguous rows in a table using the keyboard. I can Ctrl-click with the mouse to do this but can't find a way to do this with the keyboard. I searched and found somebody asked this same question before and the reply was it works in 1.3.1. I am not seeing this. What could I be missing? The Ctrl-Up and Ctrl-Down keys don't do anything and neither does the spacebar.

I'm pretty sure you can't do this using the standard JTable interface.
You might be able to write your own keyboard listener and fake focus events for up&down arrow, but making this work seamlessly with JTable seemss like it would not be trivial.

I am unabel to select all rows in advance table using Select All option

Hi all ,
I am unable to select all the rows in advance table . Select All option in advance table selects all rows present in working page but doesnt select the rows which we get by clicking next button ... i am having a requirement to select all the rows with a single click on select all , is it possible ..
Plz help
Thanking you all

Hi,
I'm using an adf table but i don't want to have the "Select All" and "Select None" options above the table. Does someone know how i have to remove those links?
Or is there indeed a solution to override the methodes of those links?
Message was edited by:
Alexander

Select unique rows from two tables...

Hi,
I have two tables, replies1 and replies2.
SQL> desc replies
Name Null? Type
URN VARCHAR2(36)
ADDRESS VARCHAR2(18)
FILESIZE NUMBER
AS_NUM VARCHAR2(6)
SQL> desc replies2
Name Null? Type
URN VARCHAR2(36)
ADDRESS VARCHAR2(18)
AS_NUM VARCHAR2(6)
Both of the tables have no primary keys, but I have indixes on (urn, addrss) combination on both....
I am trying to select the unique rows with (urn, address) from replies2, and then find the matching size from replies...
I am using the following query:
select distinct replies2.urn, replies2.address, replies.filesize from replies2, replies where replies2.AS_NUM like 'XYZ' and replies.urn = replies2.urn;
I cannot figure out why it won't work. the way I understand it is that, distinct will give all distinct combination of all column names that follow, which is what I want...
I know it is wrong, because the query:
select count(*) from replies2 where AS_NUM like 'XYZ' returns less number of rows than the above query.
Any help would be greatly appreciated.
Thank you
Oz.

Thanks a lot Mohan for your reply.
urn is not a unique key. Several rows could have the same (urn, address) pair in both tables. What I want is retrieve all (urn, address) rows from one table, and find the size from the other table to make a (urn, address, size). I want all unique combinations of (urn, address) to appear in the output.
AS_NUM is an empty column in replies... It would've been a lot easier if it wasn't, since then I'll just say: select distinct urn, address, filesize from replies where AS_NUM like 'XYZ';
I will try your query though and let u know how it goes. It takes quite a while to run since my tables are huge.

Unable to select any row(s) in table/ALV

Similar Messages

Maybe you are looking for