Unable to select Certificate for Remote Desktop Connection

Hi,
I have created a certificate with below parameter in inf file through a local Standalone 2008 r2 CA & imported it into Computer personal certificate store but unable to see this certificate entry while trying to select it under Remote desktop connection.
Somewhere saw we should have the private key in personal certificate store but didn't get how/where to get that key. Is that the reason, m unable to select this certificate or there is something missing in the input parameter used in inf file. Kindly suggest
what could be the problem.
[NewRequest]
Subject="CN=Server.Domain.com"
Exportable=TRUE
KeyLength=2048
KeySpec=1
KeyUsage=0xf0
MachineKeySet=TRUE
[EnhancedKeyUsageExtension]
OID=1.3.6.1.5.5.7.3.1
OID=1.3.6.1.5.5.7.3.2
OID=1.3.6.1.4.1.311.54.1.2
Regards,
Dhiraj

Hi,
Problem is resolved now. i have done below two changes.
--> used KeyUsage=0xA0 in inf file.
--> imported certificate through certreq -accept. Earlier i was importing cert from mmc.
I think second point resolved my problem. i even didn't think that mmc & command can make this difference.
Dhiraj

Similar Messages

  • I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

    I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
    Narmin

    I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
    In the title you state.
    From my interanet I can access srvr but not from my home.
    Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
    In the first post you state,
    I can access windows server from within interanet but don't know how to access it from internet.
    Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
    But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
    I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
    And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
    1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
    2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
    There are lots of references to port forwarding in the TC.. eg
    http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
    The things that generally go wrong are firewall on the computer that is accepting the port.
    The ISP doesn't allow connections on a particular port. (not likely in your case)
    The router is behind another router.. double NAT will kill any port forward.
    Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
    IP on the receiving device is not static and so changes.
    Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

  • Forwarding port for remote desktop connection

    I have been able to connect to my home machine from work using remote desktop.  Because of some changes at work I am no longer able to do this on the default port (3389).  So I am trying to use port 5190 (which is used for AIM) or port 5050 (Yahoo messenger).  Both of these ports are enabled from work and I don't use them at home or on the computer I connect from.
    When I changed the port on my home computer, which is connected to a Linksys WRT54G router, I am able to connect when I am on my home LAN using machine_nameort.  But when I try my public IP addressort (which is how I would connect from work) I am not able to connect.  
    I have added a port in the port range forward area of my router.  I have tried 5190 and 5050 and both will not allow me to connect when I am not on my LAN. 
    Any ideas for this?
    RIKIL

    Actually you don't need to press the reset button for 30 seconds...only 5. 
    There are two ways to reset the Router’s
    factory defaults. Either press and hold the Reset
    Button for approximately five seconds, or restore
    the defaults from Administration > Factory
    Defaults in the Router’s web-based utility.
     This is what threw me, I pressed for more than 5 seconds and it wouldn't reset.  I had to hold it for about 20 and that worked.

  • RV110W Configure for Remote Desktop connections

    I could use some help.  I have a RV110W that I just got installed and I was able to get the Client working without any problem.  The problem is I can't access any of the files on my system at the office.  I don't see an IP address when I run "ipconfig" on my remote system showing me that I'm on the LAN at the office while coming in via the VPN client.  The admin guide is of little or no help at all.
    Can someone please give me some adivce?
    Thanks - Howard

    hs3082-att,
    If you are using the QuickVPN client, no IP address will be assigned to the connecting PC. To confirm that you are in fact connected, ping the LAN IP address of the RV110W (192.168.1.1?)
    If the router that you are connecting FROM has the same LAN IP address as the RV110W, you will not be able to reach anything at the office because your local router will keep the traffic local instead of sending it through the tunnel. You should change the RV110W to something like 192.168.100.1 in that case.
    Sometimes the devices that you are trying to connect to will have a firewall that blocks access from any subnet other than it's own. You may have to change the firewall settings on the devices at the office. Try to ping a network printer or some other "dumb" device to see if you are connected.
    - Marty

  • Remote Desktop Connection Times Out With "Can't Connect" From One Specific Computer Only

    This is an odd one... I manage several servers from this computer. This particular server, 2012 Essentials, won't allow for remote desktop connections to either the server or attached workstations. I can get into the server's remote web page but when I
    attempt a remote desktop connection, it hangs on "Initiating remote connection..." and then times out with the error response that remote desktop can't connect. But... if I attempt the same connections from any other computer, I am able to get in
    and utilize remote desktop. Does this mean that there is a certificate issue with the computer unable to connect and if so, how does one remedy this? Or is it some other issue? I've attempted everything within my technical ability to no avail. Any suggestions
    are greatly appreciated.

    Hi,
    Before going further, would you please let me know the RDC version that used in the problematic computer? Was it the same with other computers?
    Please temporarily disable firewall and then check if this issue can be solved. Based on your current description, it’s hard to say the root reason of this issue.
    So, I suggest that you should check relevant log files and get some clues. It will help us to narrow down and solve your issue.
    Hope this helps.
    Best regards,
    Justin Gu

  • Why, when I successfully connect to Server 2012 Essentials R2 via Anywhere Access does the Remote Desktop Connection use the self signed certificate for RDP instead of the SSL certificate I installed when I set up access anywhere?

    Scenario:
    Windows Server 2012 R2 Essentials
    I purchased an SSL Cert from GoDaddy and I managed (after some challenges) to set up Anywhere access to use that new SSL Cert. I to rebooted the server and I am able to login to Anywhere Access vis https (using the SSL certificate) from PC, Mac and iOS.
    So far so good.
    The problem I am having is that when I click to launch a remote desktop connection to the server RDP connection wants to use the self signed SSL certificate of the server rather than the SSL Certificate I installed into Anywhere Access. As a result, I get
    a security warning like this: "The identity of the remote computer cannot be verified. Do you want to connect anyway?"
    The name in the certificate appears as ACME-SERVER.ACMEDOMAIN.local  instead of the SSL Certificate I installed, which is
    remote.acmedomain.com
    If I lick to accept, RDP does work fine, it;s just using a self signed certificate. I want it to use the trusted certificate that I purchased and installed.
    My guess is that there must be an additional step to tell Anywhere Access that when it generates the RDP session that it should use the cert? OR, is this just how it works?

    Because....
    the server does not have a 'trusted' certificate assigned to it.
    Only the RDP Gateway has the trusted certificate for the external name.
    If you want to remove that error, you have to do one of the following:
    Make sure your domain uses a public top level domaim, and get a public trusted certificate for your server.
    So, something like,
    server.domain.publicdomain.com
    Or,
    Install that certificate on your remote computer so it is trusted.
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Remote Desktop Connection With Custom Certificate on Windows 8.1 fails

    I'm trying to establish a secured remote desktop connection without success.
    The setting
    There are some local pcs with windows 8.1 Pro and windows 7 Pro, no server-edition. I've created a self signed ca-certificate with openssl for Windows. I used this to sign custom certs for the local windows-pcs, which are installed at mmc -> certificate
    snap-in for local computer -> My Certificates -> Certificates. The networkdriver has the right to read the key. The sha1-fingerprint of the custom signed certs are registered at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp
    -> SSLCertificateSHA1Hash = sha-1 hash of the custom local cert. Additionally the revocation-list is restrained to the local list by setting HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Credssp -> UseCachedCRLOnlyAndIgnoreRevocationUnknownErrors
    = 1.
    The results
    The connection form win 8.1 to win 7 works. The connection info confirms that it is a veryfied connection. The connection to windows 8.1 fails after entering the credentials with error: No connection possible. Network Level Authentication is set, but other
    level don't work as well. The log (Event Views -> Applications and Services Logs -> Microsoft -> Windows -> TerminalServices-RemoteConnectionManager -> Admin) says "Remote Desktop Services has taken too long to load the user configuration
    from server" and "The Local Security Authority Cannot Be Contacted" (error 0x80090304)
    Aditional information
    The connection via linux (remmina) works for win 7 and win 8.1, but I have no information about the encryption. It is the same with the Microsoft Remote Desktop Tool for Android.
    Maybe it is accociatet with a different cert handling by Windows 8.1 but I couldn't find further information or a solution in the internet.
    Best regards
    abditus

    I solved the problem!
    The default openssl certificate signature algorithm is md5RSA but it doesn't work with windows 8.1.
    It is at least sha1RSA needed.
    By adding "default_md = sha1" to the openssl.cnf you create certs with sha1RSA and it works fine.
    Beste Gegards
    abditus

  • Remote Desktop Connection Client 9.3.9600 unable to connect to Server 2012 RDS via Gateway

    Hi,
    I have a Windows Sever 2012 R2 RDS environment with two Gateways servers configured in high availability mode (RD Web Access, RD Gateway, RD Connection Broker roles installed) and four Windows Server 2012 R2 RDS Session Hosts. The servers are all running
    the most recent public server updates. With this configuration I when connecting externally using a Windows 7 computer with the older Remote Desktop Connection client (6.1.7601) I am able to connect without any problems however when I try connecting with a
    newer client from a computer running Windows 8.1 and the 9.3.9600 client I am unable to connect. 
    At the moment a NAT rule is configured to pass 80/443 traffic to only one of the RDS gateway servers, I've removed our load balancer from the configuration for the moment to reduce the complexity. 
    No error is generated by the client when it tries to connect it just stops trying to connect after a while.
    On the Gateways servers event logs for 
    Things I have looked into so far.
    - I've double and triple checked the RDS configuration and checked it against one of my other clients configurations that is working and they are identical. 
    - Connecting from an older client version works fine.
    I'm not sure what else can be checked does anyone have any ideas?

    Hi,
    1. What entries are you seeing in the RD Gateway's log?  Event Viewer\ Applications and Services Logs\ Microsoft\ Windows\ TerminalServices-Gateway
    2. How come you are not forwarding UDP port 3391 in addition to TCP port 443?  It should work without UDP, but you will not have UDP support which is one of the benefits of RDP 8.0/8.1.
    3. Are there any non-default group policy settings being applied to the servers and/or client PCs?  To be clear, I'm asking if any changes have been made to the default local and domain security policies, group policy objects, new GPOs that may have
    been added, etc., that are applicable to the servers and or client PCs.
    -TP

  • REMOTE DESKTOP CONNECTION (Questions For Experts)

    Q1) Is it possible to connect remotely to a computer even if the user is in one country and computer is in another (without internet? If Yes Please tell HOW.
    Q2) Is it possible to use hardware like printer while in remote connection with a tab or  lets say I am connected with a tablet which has a USB port so if I connect a USB in my TAB will it work for the remote
    desktop? (usb connected to the tab but should work as if its connected to remote computer -any possibility) If Yes Please Tell how to implement.
    Q3) For ex. If I am connected to a remote computer and since my computer is not good for gaming and I want to use the remote computer to play games while the DVD is in my physical computer.....Is there any possibility
    FINAL QUESTION : Can I connect to windows with an android or IOS devices without internet (PLEASE TELL HOW IF POSSIBLE) and I want to use my local Internet is the remote computer.
    Friends whosoever has any knowledge regarding any question please answer me, help required. I will be really thankful to you . 

    A1- its possible to establish a remote desktop connection even if the user and remote computer in differerent countries but NOT possible without internet coonection... as you will have to use public ip of remote computer.
    A2- To redirect devices and resources
    Open Remote Desktop Connection by clicking the Start button , In the search box, type Remote
    Desktop Connection, and then, in the list of results, click Remote Desktop Connection.
    Click Options, and then click the Local
    Resources tab.
    Under Local devices and resources, select the devices or resources you want to redirect.
    To see additional devices, or to redirect Plug and Play devices or drives and devices that you plug in later, click More.
    To redirect supported Plug and Play devices, under Local devices and resources, double-click Other
    supported Plug and Play (PnP) devices.
    The Plug and Play devices that support redirection and are currently plugged in appear in this list.
    To redirect supported USB devices, under Local devices and resources, double-click Other
    supported RemoteFX USB devices. The USB devices that support redirection and are currently plugged in appear in this list.
    Select the check box next to each device that you want to redirect.
    To automatically redirect drives or devices that you plug in or connect to in the future, under Local devices and
    resources, double-click Drives, and then click Drives
    that I plug in later.
    – or –
    Double-click Other supported Plug and Play (PnP) devices, and then click Devices
    that I plug in later.
    A3 - not possible to mountDVD drive on remote desktop.
    Yes you can establish remote desktop connection from android... there is an app called, Microsoft Remote desktop app, its very good , ı use it myself too...

  • Unable to establish Remote Desktop Connection (RDC)

    Hi all,
    I had activated my account for Instance of SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7 but while trying to connect using remote desktop connection, I am unable to connect. Its throwing up the error, "Remote desktop can't connect to the remote computer for one of these reasons". The screen shot of the error message is attached to this post.
    I am trying to connect to the servers 54.204.35.135 (SAP Frontend) and 54.225.249.36 (SAP Server). Both of them I am getting the same message.
    After I activate the instance on CAL, I see that on Amazon Cloud these instances are automatically started. Then I go to elastic IP and hit on associate these IPs to associate them.
    Please let me know if I need to do anything else.I am using a company laptop and am afraid if these IP addresses are being blocked somewhere.
    Please advise how to establilsh the RDC.
    Thank you.
    Regards,
    Pavan.

    Hi Pavan,
    the following comment in your initial question draw my attention:
    After I activate the instance on CAL, I see that on Amazon Cloud these instances are automatically started. Then I go to elastic IP and hit on associate these IPs to associate them.
    So you started the solution (that contains 2 images) in CAL and then changed some configuration settings in the EC2 web console, correct?
    It is important to understand, that changes to the configuration of the instances, that are made outside of CAL will have a severe impact. Only CAL knows how to configure both instances correctly, especially when it comes to the network and communication between each other.
    If you don't mind, would you be able to shutdown and terminate all running instances of this Trial solution in CAL and start from scratch without using the EC2 web console. We have throusands of users of this system and all of them get the same software - all works. I suspect the changes in the EC2 console to be a culprit here.
    All these activities should be done in CAL, not in the EC2 console:
    So please terminate all instances of this solution and wait until they are completely removed.
    Then go to the Solution tab and click on create instance
    go through the guided procedure and pay attention on the firewall / port settings in step 3
    finish and wait 30 minutes until the solution is fully started
    try to connect.
    Please let us know the result.
    Regards,
      Hannes

  • I have an Ipad 2 and here is what I am trying to accomplish.  On my laptop I connect to a remote desktop connection to access a shared program we use for reporting.  How do I set up my Ipad to access this remote server?  Thanks for the help.

    I have an Ipad 2 and here is what I am trying to accomplish.  On my laptop I connect to a remote desktop connection to access a shared program we use for reporting.  How do I set up my Ipad to access this remote server?  Thanks for the help.

    Close ... before going for a specific Cisco app ... lets find out some details:
    Host we need more details:
    What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
    What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
    Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
    Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting).

  • Remote Desktop Connection for Mac - connection lost after a minute idle

    Hi There,
    I am trying to connect from a Macbook Pro to my work (XP) machine using the latest Remote Desktop Connection for Mac.
    It used to work fine, and recently it has been dropping the connection if I've not been 'active' for a minute or so.
    What is confusing is that it is not always like this. Some days, I can leave it inactive for hours over lunch etc, and I'll come back and it will be fine. And just the other day, in the morning it dropped me out ever minute or so I was inactive, and then the afternoon was fine, and the evening was troublsome again.
    Our administrators had not changed anything during that time, nor had I changed anything on my XP machine at work, or my Mac at home.
    I connect via a wireless connection.
    These problems occur when running on battery and when plugged in.
    Any thoughts?
    Thanks,
    ThreeIsles

    Since RDC is not an Apple product, you should post your question on Microsoft's own forums for their Mac version of RDC:
    http://www.officeformac.com/ProductForums/RemoteDesktopConnectionClient/

  • I have Remote desktop connection for my mac running osx 10.6.8 and I have a windows xp laptop, I want to have my mac be able to run the windows xp from my pc, how do I do it?

    I have Remote desktop connection for my mac running osx 10.6.8 and I have a windows xp laptop, I want to have my mac be able to run the windows xp from my pc, how do I do it?

    Hello Fiona,
    Congratulations on your new iPhone!  You can sync information to your iPhone from your MacBook Pro using the Info tab in iTunes when your iPhone is connected.  Use the steps in the following article:
    iOS: Syncing your data with iTunes
    http://support.apple.com/kb/ht1386
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Remote Desktop Connection has encountered a problem and needs to close. We are sorry for the inconvenience.

    Remote Desktop Connection has encountered a problem and needs to close. We are sorry for the inconvenience.

    Hiya,
    What O/S versions(RDP) are you connecting to and from? Try and open the target machines event log and see what it throws when you try to connect.

  • Remote desktop connection unable to start, window stalls when opens RDC, any tips

    remote desktop connection does not open, when rdc starts it stalls and can not press any button.
    any ideas on how to fix?

    Since this question is about a Microsoft product, you might have more luck getting suggestions if you ask in Microsoft's own forums. This forum is for Apple Remote Desktop issues and questions and so probably not the place where you'll be most likely to get assistance with this problem.
    Good luck.

Maybe you are looking for