Unable to Select Devices in LMS RME Netconfig

Hi,
I am trying to apply netconfig to some devices through RME , however i can see the devices but not able to select them
the checkbox is disabled
any suggestions

These devices are probably put to 'unmanaged' or 'suspended' state.
See "device management state"
Cheers,
Michel

Similar Messages

LMS 3.2 and RME NetConfig Job - No Devices

I'm runnig CW LMS 3.2 on Solaris 10. If I go to Resource Management Essentials, click on NetConfig, and then select "create" as in "create a NetConfig job", it takes me to the Netconfig Jobs screen. On this screen, I check "select all devices ", but afterwards it says that "0 devices selected". There are over 1000 devices in our inventory, so I cannot understand why they are not found. They are visible on the system module, and in RME-Devices. But they are not availalble for RME Netconfig jobs.
Any ideas?

When I enter the NetConfig jobs screen, I click on "create" ,which takes me to the next screen, where I click on "device" , which takes me to the next screen where I have a select "device box" and a "select task" box. Checking the "all devices" option results in "0 devices select". If I click on the "+" sign on the "all devices" option to expand a list of all devices, it changes to a "-" but does not show any devices.
About the screen shot, due to the confidential nature of my work environment, I may not be allowed to do that. I'm checking with the security manager about that now.

Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any su

Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any suggestions?
MacBook Air, OS X Mountain Lion (10.9.1)

Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Error in X11 (unable to start device PNG)

Hello.
I have a problem with running embedded R script.
First script runs fine:
begin
sys.rqScriptCreate('Example1',
'function() {
ID <- 1:10
res <- data.frame(ID = ID, RES = ID / 100)
res}');
end;
The second one is not so fine:
select *
from table(rqEval(NULL,
'select 1 id, 1 res from dual',
'Example1'));
ORA-29400: data cartridge error
Error in X11(paste("png::", filename, sep = ""), width, height, pointsize, :
unable to start device PNG
ORA-06512: на "RQSYS.RQEVALIMPL", line 57
29400. 00000 - "data cartridge error\n%s"
Can anyone help me?
Thanks.

SELECT PVALUE
FROM TABLE(rqEval(
CURSOR(SELECT 1 "ore.connect", 0 "ore.graphics" FROM DUAL),
'select 1 pValue from dual',
'RF_TTEST_PVALUES'));Hi,
Thats is very good. Is it a way to do it in R client to avoid following error?
Example:
ORE> library(ORE)
ORE> ore.connect(user="rquser", password="pass", sid="TEST", host="r2151", port=1525, all=TRUE)
Error in .oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
Error in try({ : ORA-20000: RQuery error
Error in X11(paste("png::", filename, sep = ""), g$width, g$height, pointsize, :
unable to start device PNG
ORA-06512: at "RQSYS.RQEVALIMPL", line 104
ORA-06512: at "RQSYS.RQEVALIMPL", line 101
Regards,
Max

"Unable to open device (read failure)!" message with Samsung

I have a Samsung ML-2510 (fairly new printer) plugged into my Airport Extreme (the latest -g version before the new -n version) and seem to be having problems with printing. After powering up the Airport, the computer will allow one job to print. After that, the print status window gets to "processing job, 7%" then shows "Unable to open device (read failure)!". The only solution to get it printing again is to reset the Airport.
I've tried reinstalling the driver from Samsung.com, changing some wireless settings on the airport, restarting the computer (and printer), and even changing the USB cable. None of the above has worked.
Any solutions?

I had a similar issue with a ML-2010 after upgrading from 10.4 to 10.5 but using a Linksys wireless router rather than Airports. The steps below worked for me so I hope these are of some help to you as well. I stumbled across these in the Airport for Windows forum.
1. Opened print/fax pref
2. Went to + (add printer)
3. Went to IP and selected HP Jetdirect (not IPP, not LDP)
4. Determined the IP address for my Belkin wired print server (I determined this from looking in the Windows printer setup on my Windows laptop that printed through the print server to the ML-2010 with no problems. Initially I wasn't sure if the problem was with the print server, the printer or OS 10.5)
5. Typed the IP address in "Address" back in Fax/print.
6. Left the "Name" as it appeared.
7. Print Driver I used was ML-2010 (look in M's), not any Samsung listed driver (in the S's).
8. I didn't have to reboot anything but I've seen reports that some people had to power cycle their print server and sometimes the printer as well.
I hope this helps.

My Bluetooth USB wireless transmitter for my portable speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. Can anybody help?

My Bluetooth USB wireless transmitter for my portable BT speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. The internal and a pair of wired external speakers work fine. Can anybody help?

Just tested something and it worked.
If I put the headphones all the way in, the mac recognizes it as a digital output.
But if i don't put it all the way in, it recognizes it as headphones and works perfectly.
It's probably this crappy headphones.
If anyone has the same problem, try this out.

Unable to select the value from a list item in forms 6i

Hi ,
I'am using forms 6i. I have created a list item in my form as below.
Item_type = list item
list style - popup list
elements in list - A, B, C,D
When I open the form all the above values are displayed for the list item. But I'am unable to select the item( either A,B,C,D).
Please let me know if I need to add any thing else programatically to acheive this. The block on whixh these values are diplayed is a datablock.
This is very urgent. Any suggestions would be of great help.
Thanks
Deepthi

If you have a list item where you have:
Display A value 1
Display B value 2
Display C value 3
Display D value 4
If want to initial the value of the item to be A, you can set the initial value of the item to 1 in the property pane.
Otherwise in an initialisation triger have
:block.list_item := 1;
HTH
Tony

Unable to install Device CALs on Windows Server 2012 after OS Reinstall

Due to a hardware fault we had to reinstall Windows Server 2012. I have activated the Terminal Services licensing Server but I am unable to install Device CALs that we have purchased.
The error is as follows:
"Remote Desktop Services Licensing is unable to process your request. Make sure you provided correct information. If the problem persists, try other methods of activation. Error code is 800"
I tried contacting technical support over phone - they are also unable to resolve the issue.

Hi, thanks for response.
I contacted Clearing House over phone and provided them with all the details regarding authorization
number(s), license number(s) et al. However they also mentioned that there is some technical error from their "tool" and directed me to Technet Forum.
I shall try the Hotfix

Unable to select Quantitative data during creation of MIC while using Clas

*Unable to select Quantitative data during creation of MIC while using Class characterstics*
Dear All,
I want to transfer MIC Result recording to Batch class.
For that, i am trying to create MIC & giving class characteristic name in QS21, and then under control data, I am unable to select, Quantitative. By default system is selecting Qualitative. But I want to create that MIC as Quantitative.
Is there any setting for this?
Please help...
Thanks in advance
Edited by: Sitarami Reddy Kummeta on Nov 30, 2009 6:44 PM

Hi
to have master inspection characteristic quantitative ,the class characteristic must be of format "NUM":
Regards
Sujit

I want to name individual photos in the album but I am unable to select view sort in the drop down menu How can I overcome this?

I want to name individual photos in the album but I am unable to select view>sort in the drop down menu How can I overcome this?

Great to hear, but what was the solution?

Switching off selected devices

Hi, I wonder if anyone can help. I have a BT Home Hub 3 and I heard that you can switch off selected devices at various times of the day, i.e. switching off my son's xbox without the rest of the familiy suffering with a lack of internet. Is this facility available with the home hub 3 or would i have to upgrade to a newer system.
Thanks

Have a look here:
http://bt.custhelp.com/app/answers/detail/a_id/11364/related/1
Hope this helps
If my post has been useful, please click on the Ratings star on the left-hand side of the post.

Asmtool: Unable to clear device

I need some help with this problem. I saw that another user posted a similar issue back in February, but there were no replies to that posting -
We are installing oracle 10gR2 in RHEL4, and we have decided to use oracle Automatic Storage Management feature. We have loaded OCFS2 first to store the Clusterware files and now we are trying to load the ASMLib files. The OCFS2 setup went well and the ASMLib install was proceeding when we received the following error -
# /etc/init.d/oracleasm createdisk VOL1 /dev/sda2
Marking disk "/dev/sda2" as an ASM disk: asmtool: Unable to clear device "/dev/sda2" [FAILED]
Now, /dev/sda2 is a 50Gb partition taken from disk space on 3 servers, not an independent physical disk. When I googled the net I came across the earlier posting but found no resolution. Any help you can provide would be appreciated!
Michele
([email protected])

raw devices set up ?

SharePoint 2010 Slide Library Unable To Select Managed Metadata When Publishing.

Hello,
I'm running into some problems with Managed Metadata when uploading (publishing) slides in a SharePoint 2010 Slide Library. If I have Managed Metadata Site Columns that are set to be required in my slide library, and I publish my slide(s) into the
SharePoint 2010 Slide Library I'm not prompted to enter in my required Metadata before the slide is published. The slide will upload, but then I would need to edit the slide and then enter in the required Metadata.
If I create a new column with a type set to Choice for example, and set it to be required and I upload (publish) a slide I'm now prompted to enter in the required Metadata, but all the Managed Metadata choices are grayed out and I'm unable to select anything.
I'm able to select a Choice for the new column.
Is this a bug within SharePoint 2010 that does not allow me to enter in Required Managed Metadata Tags on uploading (publishing) slides?
Regular document libraries work just fine with required Managed Metadata.
Thanks for any assistance.
v/r
JShidell
v/r JShidell

Hi,
According to your post, my understanding is that the Managed Metadata not prompted to enter value in the required metadata.
I had tested with this issue, and I found the same issue.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Unable to select the operation mapping in Enhanced RD?

Hi Guys,
I am unable to select the operation mapping in the Enhanced Receiver determination in PI 7.1. Looks like a bug in PI 7.1. Did anybody else faced the same problem and got any resolution.
any help would be appreciated
Thanks,
Srini

Looks like a bug in PI 7.1
Not a Bug but it seems to be a restriction......have a read of the below help section:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/94467db1746003e10000000a1553f6/content.htm
From above help section:
During the definition of the interface mapping, you assign the abstract service interface ReceiverDetermination as the target
interface. The service interface ReceiverDetermination is in the Enterprise Services Repository in the software component SAP
BASIS (namespace http://sap.com/xi/XI/System).
You will notice the same behavior when you try to select the Operation Mapping in Extended RD....click on the input help....pop-window will appear....what are the source and target SI that you see?
Regards,
Abhishek.

Unable to select IS from the drop down list in message mapping

Hi,
i know that we can monitor 'Integration server' in message monitoring rather than choosing integration engine or adapter engine.
But in our existing land scapes i am unable to select IS from the drop down list in message mapping.
using PI 7.1 SP 08.
please let me know that we need to set up additional configurations settings to select IS form drop down list.
Regards,
Pradeep A.

Hi Pradeep,
please let me know that we need to set up additional configurations settings to select IS form drop down list.
There are no extra settings that needs to be done for this. I don't know whether you have noticed this, but IS option will only come up when you want to monitor the messages from the "Database" and not from the "Database overview" or "Archive".
Regards,
Neetesh

Unable to Select Devices in LMS RME Netconfig

Similar Messages

Maybe you are looking for