Unable to Select from List of Processes
Hi all.
I'm having an issue where I am unable to mouse click (or select) from a list of processes. This is happening in three different areas. When I click Start Processes, I am able to select an employee (even from HR Admin I can enter an employee) without any problems. Then after choosing my employee, I click the button 'Select Process' and I get a list of P&Fs processes. However, the top process is pre-selected and I am unable to select any other process. Even though the list of processes are different for HR Admin and manager, I still can only proceed to the Adobe form with the first (top) process. If I click edit to continue to the adobe form it opens the top selected form without an issues.
This also happens from the "Find Processes" overview screen. After entering my select criteria of processes to search, I get a list of process transactions which have been started but again, I am only able to see the details of the first one (and I cannot select any other process).
I am running Ehp 3 with the latest patches to BPs and ECC 6.0 (as of 1/3/2010). I've also tried using different browsers including IE 8 and Google Chrome.
Much appreciated in advance!
Derrick
Hi Chris.
Not sure what to look for when you reference 'controls'. As far as the business packages, they are up to date. I've eliminated the issue being ECC 6 related. Just not sure what to check on the portal side that could be causing this. Any suggestions on how to check (and update if necessary) the controls?
Thanks,
Derrick
Similar Messages
-
As Bex Query design why I canu2019t select from list in values range
Hello experts,
I want to pop input window when I use analyzer run bw report, I know to add filter through restrict, then I selected value ranges, it was appearing between input text, the button canu2019t let me input, I tried select from list, Bex Query design occured some errors, if click u2018exitu2019 will prompt unknown software exception(0xc00200001) then stop .
the imange: [http://www.itpub.net/thread-1192217-1-1.html]
How to input text or select list? Why My Bex query design canu2019t do select from list?
please let me know the soultions, thanks for you help in advance
Regards,
Stevefirst of all, thanks for your help. if need to install batch, please let me know. many thanks .
more infomation as belows:
the windows prompt:
Your application an unhandled exception occurs. If you click [continue], the application will ignore the error and try to continue. If you click the [end], it will immediately close the application.
I clicked more detail button , displayed as belows:
For more information call using Just-In-Time (JIT) debugging details
Please refer to the end of this message (instead of this dialog box) information.
Exception Text **************
System.NullReferenceException: Object reference not set to be the implementation of individual objects
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.HandleUnhandledException(Exception iException)
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
in System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
in System.Windows.Forms.Control.WndProcException(Exception e)
in System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
in System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
in System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
in System.Windows.Forms.Control.SetVisibleCore(Boolean value)
in System.Windows.Forms.Form.SetVisibleCore(Boolean value)
in System.Windows.Forms.Control.set_Visible(Boolean value)
in System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
in System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
in System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
in System.Windows.Forms.Form.ShowDialog()
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.GetUserSelection()
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.ShowSelector()
in com.sap.bi.et.selector.BExSelectorDialog.SelUICtrlDDBox.InvokeSelector()
in com.sap.bi.et.selector.BExSelectorDialog.SelUICtrlDDBox.OnInvokeSelector()
in com.sap.bi.et.selector.BExSelectorDialog.SelUICtrlDDBox.picValueHelp_Click(Object sender, EventArgs e)
in System.Windows.Forms.Control.OnClick(EventArgs e)
in System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
in System.Windows.Forms.Control.WndProc(Message& m)
in System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
inSystem.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
in System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) -
I need to select a CODE from available list of codes from table2 and insert the selected code into table1 but before I do the insertion, I need to make sure that unique constraint is satisfied.
In other words,no 2 same codes should be selected from the list for 2 rows.
example, if row1 is 24
no other rows within this select should be 24
Any ideas on how to implement?
Thanks in advanceHere's what I suggest.
1) On the when-new-record-instance of the table1 block you should use a post, which will do the needed insert/update/delete processing, but not the commit.
2) The record-group for fetching the values in the LOV should be something like:
select code, name
from table 2
where code not in (select code from table 1)
Note:
The post is intended in order that the record group should also "notice" the last record inserted/updated/deleted in/from table1.
As I recall, you may have some problems with the post in the when-new-record-instance trigger on the table1 data block if that data block in case that data block contains no records, case that will need a special treatment. -
How to select from list of values?
Dear All,
I am using XML publisher for word, where I need to select a value from a list of values, for example I have hotel code like TTAG,TOBBR,TTAG,TOTM now I need
to select hotel code and the corrosponding data should be display on word after
running the RTF. Tell me, how can I achive the same?
hare krishna
AlokThanks prety much,I am using XML to upload data from there into RTF templete. I've already insert table through load data option, but my problem is, how could I select a value from a list of values and based on that value selected from the list, it should displaydata corrosping to it. For example, I have few codes like TTAG, AMAG, TOTOM and if I select TOTM, it should display the complete address of that hotel named TOTM. If above given scenario is not at all possible, then Is there any alternate method to achieve this?
hare krishna
Alok -
I am building an internal table and displaying it as search help using F4IF_INT_TABLE_VALUE_REQUEST. How can I tell what line was selected from the search help? Only one field is filled with the selection, but there are several other fields attached to this that I need in my program - but I can't tell which line was selected, and the one field is not enough information to use to get the record from the internal table.
Hi,
RETURN_TAB would have the selected values.
FIELD_TAB will have the hit list fields.
DYNPFLD_MAPPING will have the Assignment of the screen fields to the internal table.
Regards, -
Unable to select from Oracle to SQL Server
Hi group,
I am having some issues while trying to select a SQL Server table from Oracle.
Oracle version is 10.2.0.4 64 bits on Solaris 64 bits too, this database connects to Oracle Client (with dg4odbc) on Windows 64 bits installation (Oracle Cient version is 11.2.0.1), and finally SQL Server is running right on a Windows 2000 server on 32 bits.
When I try to select the SQL Server table from Oracle, I am getting the next error message:
SQL> select * from "interfaceinventarios"@TEST;
select * from "interfaceinventarios"@TEST
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from TEST
tnsping TEST is working well.
On the Windows Server (64 bits) I used: C:\Windows\System32\odbcad.exe executable to create the datasource.
Any help or advice will be really appreciated.
Thanks in advance.
Kind regards,
FranciscoHi,
If your server is of 64 bit then the oracle client needs to be 64 bit. -
Hi all,
11.2.0.1
How do I select a list of constants as a TABLE?
For example:
SELECT ENAME FROM EMP minus SELECT FROM (
'SCOTT',
'EDDIE',
'STEVE'
and more than 50s name
Thanks,
zxy>How do I select a list of constants as a TABLE?
What exactly you are trying to solve ?
set head off
set pages 1000
set recsep off
set line 200
select 'select ename'||chr(10)||'from emp'||chr(10)||'minus'||chr(10)||'select ename'||chr(10)||'from'||chr(10)||'('||chr(10) from dual
union all
select 'select '||chr(39)||ename||chr(39)|| ' ename from dual'||chr(10)||case when rownum<(select count(*) from emp) then 'union all' else ')' end||chr(10) from emp;
But why to minus when I can say :
select ename from emp where ename not in ('JONES','FORD','WARD');
Regards
Girish Sharma -
Unable To Select From SQL Server table with more than 42 columns
I have set up a link between a Microsoft SQL Server 2003 database and an Oracle 9i database using Heterogeneous Services (HSODBC). It's working well with most of the schema I'm selecting from except for 3 tables. I don't know why. The common denominator between all the tables is that they all have at least 42 columns each, two have 42 columns, one has 56, and the other one, 66. Two of the tables are empty, one has almost 100k records, one has has 170k records. So I don't think the size of the table matters.
Is there a limitation on the number of table columns you can select from through a dblink? Even the following statement errors out:
select 1
from "Table_With_42_Cols"@sqlserver_db
The error message I get is:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message [Generic Connectivity Using ODBC]
ORA-02063: preceding 2 lines from sqlserver_db
Any assistance would be greatly appreciated. Thanks!Not a very efficient and space friendly design to do name-value pairs like that.
Other methods to consider is splitting those 1500 parameters up into groupings of similar parameters, and then have a table per group.
Another option would be to use "vertical table partitioning" (as oppose to the more standard horizontal partitionining provided by the Oracle partition option) - this can be achieved (kind of) in Oracle using clusters.
Sooner or later this name-value design is going to bite you hard. It has 1500 rows where there should be only 1 row. It is not scalable.. and as you're discovering, it is unnatural to use. I would rather change that table and design sooner than later. -
Keyboard shortcut to open a cells pop-up menu and select from list of options.
I guessed Option-Return would be the shortcut from this, as it typically lets you edit a cells contents, but no. Read the keyboard Shortcuts list in Numbers>Help but didn't see anything.
Hi ts,
Thanks for drawing my attention to this! Let's add some missing detail…
While "you just press spacebar" to open the pop-up menu, that won't select a menu item.
After you've opened the menu, 'you could press the first letter' of an entry, ( 'like every other pop-up list on Earth,') or you could press the down arrow to step down the list (and the up arrow to step up, if you went beyond the item you wanted to choose).
And you can change your mind; the menu will stay open until you confirm your choice (by pressing the space bar again, OR by pressing return OR by pressing enter).
Note that pressing the first letter will select the 'smallest' item name beginning with that letter. To move to another item name starting with that letter, you'll need to use the up or down arrow key (or the mouse).
Thanks again for posting. With luck, WideEyedPupil will still be monitoring this discussion, and will see these posts.
Regards,
Barry -
I have recently installed and used Creative Cloud and also install several applications. The apps and cc ran fine but Adobe AE would crash upon startup of the app in which is prompted a message stating ...the drive which it is installed on does not have enough memory or disk cache is full. Please change in preferences. I attempt to do so but AE shuts down after I select ok. I installed the cleaner tool and uninstalled all Adobe products and attempted to reinstall creative cloud and now I get a "...We've encountered the following issues: Creative Cloud desktop failed to install. (Error code:50)
I have been trying to resolve this issue for three weeks now which I did finally get it to work by opening the AE by selecting a AE file. I was able to use it 3 times for the amount charged for the monthly fee and I also downloaded several of the other apps but was
unable to use them due to this issue then uninstalled with Adobe cleaner tool!
PLEASE HELP!
Message was edited by: Paul WhitehurstJeff,
I have tried to install on another drive after downloading Creative Cloud clean-up and uninstalled all adobe creative cloud. So if I erase my temp folders it might work?
Please help I have basically paid for my 2nd month and only used a few times.
Thanks,
Paul -
Trigger should fire on Mouse Selection from List
Hi,
I have two list item type boxes in which first one is populated on when-new-block-instance trigger I want to populate second on the basis of first list item selection which trigger should I use b/c I already tried mouse-click but it fires on just clicking on list box not provide the selection of individual item and also mouse double click and mouse enter both are suffice the requeirement.
One thing more I have defined key-next-item trigger on the above first list item but once I click on this list item the key-next-item trigger will be disabled automatically or not fired.
Thanks and regards
Message was edited by:
skhawar03Hi,
When-mouse-click as I understand you can't use in case of poplist b/c if you click on poplist this trigger will fire and does not allow you to do anything, regarding when-mouse-enter this trigger doesn't work I have used this trigger but how it fires I don't understand, if anyone know tell me, thanks. -
Value of a cell dependent on a data selected from the list in another cell
Hello Everyone,
Could you please help to solve this puzzle.
I need to make a value of cells in the 2nd column dependent on the selection made in the cells in the 1st column, i.e.:
Header 1
Header 2
List An
LIst Bn
Lists A and B have 10 items each
A1 B1
A2 B2
A10 B10
If A1 is selected I need a B1 appear in the second column in the same row, if A2 selected then B2,...and so on.
Could you please hep to resolve this, if at all this is possible?
Many thanks,
AndrewSupposing that your list is a drop down list, you could put a script like the following on the exit event of List A. (very approximate, since I don't know any of your field names)
switch (this.rawValue)
case "A1":
ListB.rawValue = "B1";
break;
case "A2":
ListB.rawValue = "B2";
break;
Obviously, you'll want to replace "ListB" with the name of your field, and possibly the references to it (ie. TableName.RowName.FieldName) and fill in more case statements all the way to A10 if that's what you need. If List B is going to be a read-only field, you may even want to make it simply a text input box and have it display the values you want it to have based on the selection from List A. -
Unable to select IS from the drop down list in message mapping
Hi,
i know that we can monitor 'Integration server' in message monitoring rather than choosing integration engine or adapter engine.
But in our existing land scapes i am unable to select IS from the drop down list in message mapping.
using PI 7.1 SP 08.
please let me know that we need to set up additional configurations settings to select IS form drop down list.
Regards,
Pradeep A.Hi Pradeep,
please let me know that we need to set up additional configurations settings to select IS form drop down list.
There are no extra settings that needs to be done for this. I don't know whether you have noticed this, but IS option will only come up when you want to monitor the messages from the "Database" and not from the "Database overview" or "Archive".
Regards,
Neetesh -
Unable to select the value from a list item in forms 6i
Hi ,
I'am using forms 6i. I have created a list item in my form as below.
Item_type = list item
list style - popup list
elements in list - A, B, C,D
When I open the form all the above values are displayed for the list item. But I'am unable to select the item( either A,B,C,D).
Please let me know if I need to add any thing else programatically to acheive this. The block on whixh these values are diplayed is a datablock.
This is very urgent. Any suggestions would be of great help.
Thanks
DeepthiIf you have a list item where you have:
Display A value 1
Display B value 2
Display C value 3
Display D value 4
If want to initial the value of the item to be A, you can set the initial value of the item to 1 in the property pane.
Otherwise in an initialisation triger have
:block.list_item := 1;
HTH
Tony -
I am unable to print from my ipod to HP5510 which is listed as one of Apple's Airprinters
I am unable to print from my ipod to HP5510 which is listed in Apple's list of recognised Airprinters
Start up in safe mode
http://support.apple.com/kb/PH4373 <<< click here.
Restore your computer’s software
http://support.apple.com/kb/PH3840 <<< click here.
http://www.apple.com/buy/locator/ <<< click here.
Maybe you are looking for
-
Error while inserting attachements data into FND_LOBS
Hi, I m trying to insert data into fnd_lobs using below, I didn't declare any variables for below. I m getting many compilation erros for below insert, Could you let me know if i have to declare any of below values. INSERT INTO fnd_lobs (f
-
The final_patching_report.log is showing as follows: ----------START OF PATCHING REPORT------------------ * BIAPPSSHIPHOME Patching Report .......... Patch Succeded: fsclite_rel7mlr2_16424872.zip Patch Succeded: BISHIPHOME_11_1_1_7_0_GENERIC_130409_1
-
Airport Extreme base station vs. Linksys router
Hi all -- I have a tech choice to make and I'm soliciting advice and war stories from those who have been in my place. I have a DSL connection, G5 Mac and a Windows laptop. I've been connecting to the Internet via a Linksys WRT54G router -- the Mac i
-
Hi guys, I need some everytime I try to download a song purchase from itunes I get the error message. 'Unable to Download Song' could not be downloaded at this time. I cannot even sync with itunes on the PC. Kind regards Ian
-
How can I change default message encoding in Mail?
In Lion, most of my email messages in Simplified Chinese is encoded in iso-2022-cn, while I want them in gb18030 or utf-8. Instead of choosing encoding manually every time, can I change the default message encoding somewhere?