Unable to select MDS Partition

Hi Everyone,
I'm unable to view the SOA_INFRA Partition while trying to create SOA-MDS Connection in JDev 11.1.1.4.
SOA 11.1.1.4 and AIA FP is installed
Any idea why this partition is not showing up ?
Regards
Sabir

Was using wrong user name instead DEV_MDS

Similar Messages

Long Beep tone at startup - Unable to select boot partition

Recently I was running a software update on an old G4 which had been working perfectly. When the system restarted it made a long beep tone then the usual bong. The system hung at the "starting login window" stage.
The beep is not a bad RAM beep, that one is short. This is a long beep like one you get when you update firmware.
Tried taking out and reseating the RAM but that did nothing.
After booting into OF a couple of times, doing "Reset All", Zapping PRAM etc. we still the get tone at startup only now we just get the white OF screen. It no longer tries to boot into OSX unless we type "Mac Boot", in which case it hangs at the login window again.
I attached an external drive with two partions, one with 10.3.9 and another with 10.4. Both will boot successfully on my old Pismo and my PB G4. When the OF screen came up I typed Mac Boot and held down the Option key. The blue screen came up and first boot partition was displayed, but the machine sat there and spun forwever searching for the others. I figured it was stuck on the internal drive so I disconnected the ribbon cable and tried again. This time both partions on the external drive are available, Yae! However when I go to select either one and click on the right arrow nothing happens. The selection seems to bounce back to the first partition. And through all of this the long beep tone is there at startup.
So thats the stage we are at. If anyone can shed some light on this situation we would be most appreciative. What is causing the tone? How can I fix it?
Why doesnt the system accept the boot drive selection?
Mike

Hi Petra,
It was one of the recent security updates for 10.3.9 along with Quicktime, iTunes etc. I couldn't tell you exactly which ones as its been a few weeks since the original event. However I can say that I had already done the recommended firmware update for that machine several months before the crash.

Unable to resize a partition.

Hello everyone
I `ve recently created a new partition on my MacBook Pro running OS X 10.9.4, and that was for install the public Beta of Yosemite, then i decided to delete that partition with Utility disks, then that space now appear gray, but the problem is when i tried to resized the partition dragging the lower right conner above, and then i clic "apply", nothing pass, So i was unable to resized the partition.
Could someone please help me .
here is a picture of UD.

As I suggested on your first post of this topic:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
After you have installed OS X you can use Boot Camp Assistant to create a new Boot Camp partition for Windows. Do not attempt to use Disk Utility or Boot Camp Assistant to create a third partition. You can have at most two partitions: OS X and Windows. You created a third partition which you then removed, and that is why this problem arose.

Unable to select the value from a list item in forms 6i

Hi ,
I'am using forms 6i. I have created a list item in my form as below.
Item_type = list item
list style - popup list
elements in list - A, B, C,D
When I open the form all the above values are displayed for the list item. But I'am unable to select the item( either A,B,C,D).
Please let me know if I need to add any thing else programatically to acheive this. The block on whixh these values are diplayed is a datablock.
This is very urgent. Any suggestions would be of great help.
Thanks
Deepthi

If you have a list item where you have:
Display A value 1
Display B value 2
Display C value 3
Display D value 4
If want to initial the value of the item to be A, you can set the initial value of the item to 1 in the property pane.
Otherwise in an initialisation triger have
:block.list_item := 1;
HTH
Tony

Unable to select Quantitative data during creation of MIC while using Clas

*Unable to select Quantitative data during creation of MIC while using Class characterstics*
Dear All,
I want to transfer MIC Result recording to Batch class.
For that, i am trying to create MIC & giving class characteristic name in QS21, and then under control data, I am unable to select, Quantitative. By default system is selecting Qualitative. But I want to create that MIC as Quantitative.
Is there any setting for this?
Please help...
Thanks in advance
Edited by: Sitarami Reddy Kummeta on Nov 30, 2009 6:44 PM

Hi
to have master inspection characteristic quantitative ,the class characteristic must be of format "NUM":
Regards
Sujit

"Unable to determine destination partition, disk or drive" when Media deployment is used

We are heavy users of MDT 2013's "media" deployments -- in fact, once we finish testing a new image build on our lab server, media is created and is the sole method we use to deploy new systems due to many limitations.
We ran into the following issue lately when using USB sticks or hard drives for our deployment media. Deployment of an OS image fails at the "Inject Drivers" stage. The hard disk inside the computer is formatted properly, but the TS fails with
the error "Unable to determine destination partition, disk or drive".
I dug into the logs, and it appears that "Inject drivers" does a check for where the \Drivers folder should be placed. The problem is that most USB hard disks and many higher-end USB sticks show up as "hard drives" rather than "removable
media" when plugged into the machine. Adding another physical disk that appears as a fixed disk with an NTFS partition apparently confuses MDT and you get this error message. I think any "ReadyBoost enabled" USB stick has to show up on the system
as a fixed disk rather than removable, so if you use these you might have this problem.
The only workaround is to explicitly specify the disk number and partition number to use when you invoke "Install Operating System." The drivers step must take this information when determining where to put the driver store.
Is there any other explanation for why this would be happening? We're stuck with media deployment for the foreseeable future, and until Microsoft fixes the problem with handling of split WIM files, we have to use NTFS formatted disks/sticks...this might
be making it harder for the MDT logic to determine where to put the OS.

MDT should be smart enough to know that it should Skip USB drives.
However if you have a USB 3 Hard DIsk (not a USB Flash Disk), that might be the problem
1. Try using only Flash Drives.
2. Try plugging the USB Hard Drive into a USB 2.0 port
3. Additionally try not to use USB Hard Drives that are *Larger* that the internal hard drive.
If you still have problems, can you copy your Bdd.log file to a public site like OneDrive and share the link?
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

[Solved] unable to mount harddisk partition or flash drive

After recent updates to gnome 3.4.2,i am unable to mount harddisk partition or flash drive .I have 2 year old arch installation with gnome.
When i click on partitions in nautilus,it says "Unable to mount program files \n Not authorized to perform operation"
Problem is not only while mounting partitions.
Wherever we need authorization .Like changing date and time ,changing user accounts using gnome UI etc.The unlock button is greyed out permanently.
even i am not able to shutdown using gnome menus. it just log me out only ,do not restart or shutdown.Though i can shutdown using shutdown command on commandline.
i run gnome using daemon method. not through xinitrc .
https://bugs.archlinux.org/task/25031?p … ekit#close
I found a similar discussion in this bug. But since, i do not use xinitrc, it is unlikely they will help me.
Can someone be kind enough to help me on this?
Thanks in advance.
Last edited by piyushbhatt (2012-09-11 05:48:57)

maybe changes in udev or any other package
you have polkit polkit-gnome
and you user is in optical, disks and wheel groups?
for me those above work in every sitation

I want to name individual photos in the album but I am unable to select view sort in the drop down menu How can I overcome this?

I want to name individual photos in the album but I am unable to select view>sort in the drop down menu How can I overcome this?

Great to hear, but what was the solution?

SharePoint 2010 Slide Library Unable To Select Managed Metadata When Publishing.

Hello,
I'm running into some problems with Managed Metadata when uploading (publishing) slides in a SharePoint 2010 Slide Library. If I have Managed Metadata Site Columns that are set to be required in my slide library, and I publish my slide(s) into the
SharePoint 2010 Slide Library I'm not prompted to enter in my required Metadata before the slide is published. The slide will upload, but then I would need to edit the slide and then enter in the required Metadata.
If I create a new column with a type set to Choice for example, and set it to be required and I upload (publish) a slide I'm now prompted to enter in the required Metadata, but all the Managed Metadata choices are grayed out and I'm unable to select anything.
I'm able to select a Choice for the new column.
Is this a bug within SharePoint 2010 that does not allow me to enter in Required Managed Metadata Tags on uploading (publishing) slides?
Regular document libraries work just fine with required Managed Metadata.
Thanks for any assistance.
v/r
JShidell
v/r JShidell

Hi,
According to your post, my understanding is that the Managed Metadata not prompted to enter value in the required metadata.
I had tested with this issue, and I found the same issue.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Unable to select the operation mapping in Enhanced RD?

Hi Guys,
I am unable to select the operation mapping in the Enhanced Receiver determination in PI 7.1. Looks like a bug in PI 7.1. Did anybody else faced the same problem and got any resolution.
any help would be appreciated
Thanks,
Srini

Looks like a bug in PI 7.1
Not a Bug but it seems to be a restriction......have a read of the below help section:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/94467db1746003e10000000a1553f6/content.htm
From above help section:
During the definition of the interface mapping, you assign the abstract service interface ReceiverDetermination as the target
interface. The service interface ReceiverDetermination is in the Enterprise Services Repository in the software component SAP
BASIS (namespace http://sap.com/xi/XI/System).
You will notice the same behavior when you try to select the Operation Mapping in Extended RD....click on the input help....pop-window will appear....what are the source and target SI that you see?
Regards,
Abhishek.

Unable to select IS from the drop down list in message mapping

Hi,
i know that we can monitor 'Integration server' in message monitoring rather than choosing integration engine or adapter engine.
But in our existing land scapes i am unable to select IS from the drop down list in message mapping.
using PI 7.1 SP 08.
please let me know that we need to set up additional configurations settings to select IS form drop down list.
Regards,
Pradeep A.

Hi Pradeep,
please let me know that we need to set up additional configurations settings to select IS form drop down list.
There are no extra settings that needs to be done for this. I don't know whether you have noticed this, but IS option will only come up when you want to monitor the messages from the "Database" and not from the "Database overview" or "Archive".
Regards,
Neetesh

Unable to select the created Ports(greyed out) in the import manager

Hi ,
We have created some ports with specific Remote system and XML schema's and also assigned the map to it.
The processing type is manual for now,since we want to load data manually using import manager from the Ready folder of the port since PI is dropping the files there.But when I load import manager and select the file type as "Port" and also the relevant remote system ,I cannot select any of the list of ports created ,All are greyed out.
All I need is to select "Port" option ,remote system and use the created port from the dropdown list of import manager " connect to source" step,which i am unable to select as all the port s are greyed out and unable to select.
Any help greatly appreciated...

Hello Arvind,
There is no need to start the MDIS (Import server) if you are importing the data manually.you just open the import manager, login into the repository and select type as XML as per your case and select the remote system (it depends on your requirement) and select the port on which your xml files resides.and enter in the import manager then map you data accordingly and you can import into the repository.
when you want to automate the process for importing the data in repository then you will need to Start the import Server. In that case import server automatically pick the file from the ready port folder and also set the property in console as the processing type is Automatic.
Hope this will help you and clear your doubt.
TNR,
Saurabh...
Reward if found helpful.

Unable to select Edit in Adobe PDF Portfolio?

I'm using Adobe XI with flash player 11.7.700.202, which I believe is the current version, and I'm unable to select the 'Edit' button as it appears that it's been disabled. Please direct me to a solution.
Note: it worked just fine in Adobe Pro 9.
-Tammy

The portfolios are created through Outlook (sync'd from Gmail for multiple printing) using Adobe XI Pro so your comment above answers part of this question.
We had created portfolios using Lotus Notes and Adobe Pro 9; I was able edit the 'Description' when I had to print specific emails and I was even able to change how the emails were displayed (layout).
Can you tell me if there will be a fix/update for this?
-Tammy

PDF Assembly is not working for ddx :Unable to select font for character U+54 'T'

Hi , I am getting the following error while generating the pdf. : Caused by: com.adobe.livecycle.assembler.client.ProcessingException: ALC-ASM-S00-002: Failed to execute the DDX - error messages provided. at com.adobe.livecycle.assembler.AssemblerServiceImpl.makeResult(AssemblerServiceImpl.java:6 74) at com.adobe.livecycle.assembler.AssemblerServiceImpl.execute(AssemblerServiceImpl.java:410) at com.adobe.livecycle.assembler.AssemblerServiceImpl.invokeDDX(AssemblerServiceImpl.java:29 0) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:615) at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:181) ... 33 more Caused by: com.adobe.internal.ddxm.DDXMException: DDXM_S18005: An error occurred in the PrepareTOC phase while building <TableOfContents>. Cause given. at com.adobe.internal.ddxm.task.toc.PrepareTOC.execute(PrepareTOC.java:234) at com.adobe.internal.ddxm.blueprint.BluePrint.postExecute(BluePrint.java:306) at com.adobe.internal.ddxm.ddx.Node.execute(Node.java:353) at com.adobe.internal.ddxm.Executive.execute(Executive.java:244) at com.adobe.internal.ddxm.Executive.execute(Executive.java:192) at com.adobe.livecycle.assembler.AssemblerServiceImpl.execute(AssemblerServiceImpl.java:408) ... 39 more Caused by: com.adobe.internal.pdfm.toc.TOCServiceException: PDFM_S18001: The operation of producing a table of contents failed. at com.adobe.internal.pdfm.toc.TOCServiceImpl.formatTOCContent(TOCServiceImpl.java:1877) at com.adobe.internal.pdfm.toc.TOCServiceImpl.getNumberOfTOCPages(TOCServiceImpl.java:1681) at com.adobe.internal.ddxm.task.toc.PrepareTOC.execute(PrepareTOC.java:217) ... 44 more Caused by: com.adobe.fontengine.inlineformatting.FormattingException: Unable to select font for character U+54 'T', Requested attributes:Family=Arial|Size=12.0|Stretch=normal|Style=normal|Variant=normal|Weight=400|O TFDiscretionaryLigatures=minimum|WritingMode=lr-tb|BidiLevel=0|ScaleToFit=1.0|Shift=-none- would appreciate if anybody can help on this.. Thanks & Regards Masthan Shaik

I think that all your form parameters must begin with alowercase letters, for example
startOfSession instead of StartOfSession
try to rename your selectname paramters.
Le me know if ti works,
Giovanni

Unable to select logical relations in DataModeler version 4.1.0.866 Build 866 on Mac Yosemite 10.10.1

Hi Team,
I can not select logical and physical relations in DataModeler version 4.1.0.866 Build 866 on Mac Yosemite 10.10.1 (Java SDK 1.8). DataModeler does not allow me to select them. I mean the next scenario: I create two entities (or tables) and add a logical (or physical) relation between them. After this I can not select the relation in diagram window. Meantime I still can select the relation in browser window.
Could you please suggest me is it a bug (maybe a platform specific problem) or did I miss something in software options?
I found a topic about the same issue. It describes the same problem, though the topic is without an answer and was archived.
New bug - Unable to select logical relations in version 4.0.2.15 Build 15.21 on Mac
At the end, if this is a bug (even a platform specific one), where may I publish details about it to ask for a fix from Oracle team someday in future?
WIth best regards,
Kostyantyn

Hi Philip,
Thank you for the good hint about "default line width and colour".
Meantime the option does not resolve the problem in my case.
According to your suggestion I set maximal width for relation lines and I still can not pick (select) it in diagram window.
I checked behaviour of DataModeler with next display resolutions on MacBook Pro (Retina, 15-inch, Mid 2014) in System preferences Displays: "Best for display"; Scaled "More Space", "Larger Text", and "Best (Retina)"... And the problem takes place in all these cases.
Please see attached image - this is how I see the relation line. And I still can hit it!
If I use the DataModler on a casual external monitor, the problem is absent (no matter what a width is). Also I believe the problem takes place only on mac retina displays. Therefore I think this is a platform specific bug.
I do understand a root cause of the problem may have no direct relation with Oracle DataModeler source code.
With best regards,
Kostyantyn

Unable to select MDS Partition

Similar Messages

Maybe you are looking for