Unable to select the filter value after query execution

hi,
I am unable to drill down my keyfigures.
1.i have a lC and GC values out of which GC is hidden so after the query execution i would like to filter my value between GC and LC but i do get only LC value in the filter and i do not get GC value to select .
Could any one tell me how this can be done.this is very urgent.
Thx
Subha

resolved on my own,so i am closing this.
Thx
Subha

Similar Messages

Selection of Filter Values for Query Execution -Only Values in InfoProvider

I created a query based on an ODS. For the query charateristic 0NFCAT_CODE a variable was created by me. To the time of query execution F4 shows all values available in the charateristic, but only values available in the ODS are expected.
The characteristic 0NFCAT_CODE is a reference characteristic to 0CAT_CODE. 0NFCAT_CODE is compounded with 0NFCAT_TYPE (reference to 0CAT_TYPE) and 0NFCAT_GRP (reference to 0CAT_GRP). All characteristics 0CAT_CODE, 0CAT_TYPE and 0CAT_GRP are set to Query Def. Filter Value Selection = Only Values in InfoProv and Query Execution Filter Val. Selectn = Only Values in InfoProvider.
Could anybody give me a help? Thanks in advance.

Hi,
that is master data of 0NFCAT_CODE.
Regards,
San!

Authorization check for Selection of Filter Values for Query Definition

I am looking for a solution to the following problem:
Assuming you have confidential master data in your development system.
How can I protect a query developer to see only master data values, that he is allowed to see when e.g. creating a restricted key figure.
I know that you can enable a setting in the "Business Explorer" tab that says "Query Def. Filter Value Selection". The help says:
This field describes how the selection of filter values and the restriction of characteristics function when you define queries.
The values from the master data table are normally displayed when you restrict characteristics. For characteristics without a master data table, the values from the SID table are displayed instead. In a number of cases, however, it could be better to display only the values that are in the InfoProvider. The setting "InfoProvider Values Only" is permitted for this reason.
This would almost do it, but it can be overwritten in the BEx Query Designer.
Is there a way of preventing Query Developers from seeing all InfoObject values when creating restricted key figures?
Thanks for your replies.

Hi,
Thanks for the points. I am not too sure how you guys go about implementing SAP. Sorry I am not trying to be rude but you're not suppose to see any "real" data in DEV where all development takes place. You can't prevent query developers to see data. Without data there is no way they know their queries are right or wrong. Ask ECC guys to load dummy data to DEV environment that closely resemble those data currently in legacy e.g. real data. Sorry it was my mistake at the beginning when i thought it was preventing specific end users to see data that are not belong to them.

Select the filter value display "No Entries Found"

Hi All,
I have a problem with the bex query. Query is built on a multiprovider.
I am using restricted key figure with constant selection checked for the characteristic that is available only in one cube.
Because of this when I right click and select Filter values on the free characteristics from the report, I get (No Entries Found)
If I remove constant selection from the key figure, report works fine.
Can someone help with a solution;
Thanks,
Biju

Assuming your data is coming from only one cube...
Drag 0INFOPROV in your Filter and restrict it with your your Cube
You can find 0INFOPROV in Dimensions under Data package
Hope this helps.

Can we Validate the Prompt values before query execution? If Yes, How?

I have Scenario, where it prompts me for 3 values. The sum of 3 values should be equal to 100.
The query should execute only if sum of 3 values is 100 else it should popup a message with content not equal to 100 and prompt for selection.
If this cannot be achieved do we have any work around for this?

Hi Kranthi,
It is not possible to pop-up a message based on prompt parameters.
One work-around to execute teh query only when sum of all 3 prompt values is 100 could be usage of derived table.
You can define your query and in WHERE condition, pull all 3 prompt values using @Prompt() and do a check for SUM=100.
If condition meets, Query will return data otherwise no data will come to report.
You can also use userresponse() to show sum of prompt values and error message on report page.
-Dhyan

Error occured when selecting a filter value on the query

hi,
after the execution of the query on a multiprovider, i select a filter value for a particular characteristic then i get a pop up error message "Error reading the data of infoprovider ZTC_SUV12"
could anyone of you help me
Thanks and Regards,
Subha

Hello,
          Does the MultiProvider that contains an SAP RemoteCube , if so then try this depending on which system you are working.
BW 3.0B
           Implement Support Package 24 for 3.0B (BW3.0B patch 24 or SAPKW30B24 ) in your BW system. The Support Package is available ifnote 0723193 with the short text "SAPBWNews BW Support Package 3.0B Support Package 24", which describes this Support Package in greater detail, is released for customers.
BW 3.10 Content
           Implement Support Package 18 for 3.10 (BW 3.10 patch 18 or SAPKW31018) in your BW system. The Support Package is available oncenote 0723260 with the short text "SAPBWNews BW 3.1 Content Support Package 18", which describes this Support Package in more detail, has been released for customers.
BW 3.50
           Implement Support Package 09 for 3.5 (BW3.50 patch 09 or SAPKW35009</>) in your BW system. The Support Package is available oncenote 0763335 with the short text "SAPBWNews BW Support Package 09 NetWeaver'04 Stack 09", which describes this Support Package in more detail, has been released for customers.
hope it helps,

Unable to select the value from a list item in forms 6i

Hi ,
I'am using forms 6i. I have created a list item in my form as below.
Item_type = list item
list style - popup list
elements in list - A, B, C,D
When I open the form all the above values are displayed for the list item. But I'am unable to select the item( either A,B,C,D).
Please let me know if I need to add any thing else programatically to acheive this. The block on whixh these values are diplayed is a datablock.
This is very urgent. Any suggestions would be of great help.
Thanks
Deepthi

If you have a list item where you have:
Display A value 1
Display B value 2
Display C value 3
Display D value 4
If want to initial the value of the item to be A, you can set the initial value of the item to 1 in the property pane.
Otherwise in an initialisation triger have
:block.list_item := 1;
HTH
Tony

I cannot select radial filter points after I create them in Lightroom. Anyone experience this issue before and what might be the solution?

I cannot select radial filter points after I create them in Lightroom. Anyone experience this issue before and what might be the solution?

Press H to hide/show control points.

Error message while selecting a filter value

Hi Guys,
I am running a sales report n its executing fine...I mean...the report is getting displayed properly..but when i am trying to select a filter value...for example...trying to select a sold to party....when i selct that particular sold to party and execute the query...its coming up with an error...pls check..
Error msg:
The following error text was processed in the system BWP : SQL error 3114 occurred when accessing program CX_SY_OPEN_SQL_DB=============CP part LOAD.
The error occurred on the application server soabwp1_BWP_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: FETCH_DATA_OPENSQL of program SAPLRSDRS
Function: RSDRS_CURSOR_FETCH of program SAPLRSDRS
Function: RSDRS_READ_DATA of program SAPLRSDRS
Function: RSDRC_BASIC_DB_QUERY_DATA_GET of program SAPLRSDRC
Form: BASIC_QUERY_DATA_GET_ROLAP of program SAPLRSDRC
Function: RSDRC_BASIC_QUERY_DATA_GET of program SAPLRSDRC
Function: RSDRC_BASIC_CUBE_DATA_GET of program SAPLRSDRC
Form: DATA_GET of program SAPLRSDRC
Function: RSDRC_CUBE_DATA_GET of program SAPLRSDRC
Function: RSDRC_CUBE_DATA_GET_OLAP of program SAPLRSDRC
Its pretty urgent...I will award the highest points if this gets solved...
Thanks,
SAPconsultant.

Hi
It depends on the ssytem settings. The problem with your query is that it is not able to fetch all the data due to lack of memory. However, when you are giving smaller range, you are getting the output. You can either ask the basis guy to increase the memory space or try running the query by giving smaller date range.
Hope it helps.
Lasya.

A filter value for Query is set with some value automatically

Hello SAP sourcing Guru!
I created a query which has several filters.
Some of Filter's type is VLV.
When I preview the query somehow the filter values are already set with some value even though I did not set the default value.
For example, filter name is Region and there are four regions: Asia, NA, Europe, and SA.
I want to select one of them from drop-down menu. But Asia was already selected when I clicked the preview button for the query. I want to see "Please Select" instead of Asia from drop-down menu. I did not select "Prefill value from cache" for the filter. I made the filter Optional only. I did not set Default Value either for the filter.
Any clues?
Thank you for your response in advance.

Hi,
In the Default value field of the filter prompts, you need to mention the Class Reference ID of the corresponding field. E.g., if you have Contract document phase as a filter, then in that if you want to display a blank or none value, then you should use null:2016.
Similarly for vlv type, the system has a value 616. Hence if you want to display a None value insteead of Asia, use the following in the Default value field:
0:616:null.
The way to find the class reference ID is to goto the RG > Class Reference > Look for the field that you are attempting to default on.
Hope this helps,
Vikram

Preflight keeps saying "Unable to save the PDF File after post processing"

I'm at a loss how to overcome this. Spent almost a whole day, together with another person, trying to fix it with no success!
I use Adobe pro CC on a PC
I usually receive pdf files from this one client who edits and formats a book in Mac Pages. Up until a few days ago I had no problems converting the client's pdfs into pdf/x3, but the last three versions of the latest file have stumped me.
Just to test, I first just tried to convert the file (33MB), unchanged, to pdf/x3 using the save as other option - message reads "the document has been saved, however, it could not be converted according to the selected standard profile: convert to PDF/X. Please use preflight with the profile "Convert to PDF/X" in order to identify those properties of the document which prevent it from being compliant to this profile"
if I then choose under Profiles - convert to PDF/X3 - it says no problems found, and appears to have saved the file. If I try to save again as a pdf/x3, just to make sure, it then tells me it's not pdf/x3 compliant
OK - so then I go back to preflight - and choose the standards function - then pdf/x3, then continue with the default colour profile. About halfway through the conversion, at the point of saving the file, I get the message "unable to save the pdf file after post processing"
So far I've had no luck figuring out what this is.
I then choose the option of "verify compliance of ppdf/x3" - message reads "pdf/x3 version key (GTS_PDFXVersion) missing", and "Trapped key not true or false"
Help!! How can I be sure the file converted / or not?
kim

Yes I was/am aware of Preflight's inability to play nicely over cloud technologies in certain cases, especially wrt Standards technologies, this will be partially addressed in an upcoming version of Preflight without saying too much. But the same thing could theoretically have happened if the file was also located on another local network client or server. Leaving aside the argument that this may violate the Acrobat User Agreement - since purchasing the software, the user agrees to employ its functionality on a single host system and precludes host-client-based scenarios - this simply is not a supported use, meaning the user may not have expectations that it will work at all, if the applications requirements are not observed. There do exist server-solutions for Preflight files within networks, but Acrobat and by extension Acrobat Preflight is not one of those solutions, and (still) belongs in the single host-based desktop environment.
However most (99.9%) functions within Acrobat <-> acrobat.com file exchange are supported, file syncing across multiple devices will soon be supported, but Standards compliance is still admittedly a problem at this point. Some testing has been done using 3rd party cloud technologies starting with enterprise-based solutions, such as Office 365, and this will continue to ramp up to include other 3rd party products.
As for the second point, Preflight will usually change the PDF version to be complaint, are you saying that it was unable to do so in this case? It seems that this error should have popped up during the normal Preflight conversion attempt. Personally I think solving a workflow problem using the print path is a little bit of a heavy-handed approach, but if helped and the results are acceptable, then that is good. Since that path is non-existent on a Mac, as one needs to Save as Adobe PDF from the Print dialog's PDF drop-down menu, I am assuming your workflow involved file creation on a Mac, then further processing on Windows using the PDF printer. I am wondering if a simple resave/Save As... to PDF with overwrite on a Mac, or Preflighting the file using a PDF version compatibility profile before the PDF/X conversion would have helped. Since there are such a multitude of methods that a PDF can be created, there are also many ways within Acrobat that a user can shape the file to be compatible with the expected workflow, ie, 'many ways to skin a cat', without being morbid.

How to - Select Multiple Filter Values w/o Navigation ability

Just FYI, I had a requirement to allow users to select multiple characteristic filter values. Something like a capabilities a combo box would afford us.
To do this just use a Generic Nav Block Web Item and in the Web Item configuration just uncheck the "Display Navigation Icons".
It gives them the ability to select multiple filter values without all the Drill up/down capabilities.

You can use multiple filter options using the web item dropdwon box.
There is a How to document available in the BW 2.0B section for this..link below.
https://websmp206.sap-ag.de/~sapdownload/011000358700003825382001E/HOWTOMULTIPLESELECTION.DOC
Thanks.

SPSiteDataQuery - filter by file Title - Can I use variable for the filter value?

I use SPsiteDataQuery to search across multiple lists and filter by file title. I have the file title information in a variable.
Can I use variable in the filter value?
string fileName = "Policies.doc"
SPSiteDataQuery spQry = new SPSiteDataQuery();
spQry.ViewFields = "<FieldRef Name='Title'/><Value Type='Text'>fileName</Value>"

If I have understood correctly, you want to search based upon a File title in all the sites. You can include a query to filename in the spQry
spQry.Query = "<Where>" +
"<Eq>" +
"<FieldRef Name=\"FileLeafRef\"/>" +
"<Value Type=\"Text\">" + fileName + "</Value>" +
"</Eq>" +
"</Where>";
get2pallav
Please click "Propose As Answer" if this post solves your problem or "Vote As Helpful" if this post has been useful to you.

Data Transfer Process filter: how to view the filter values?

Hi,
does anyone know how to view (and download) the values of a filter of data transfer processes?
I want to compare the filtervalues of data transfer processes from productive system with development system. Normally the DTP's are created in a development system and transported with TMS to quality and productive systems. In the productive system there is often the need to slightly change the values in the filter, and to do this directly in the productive system without transport.
If the same DTP is used and changed by another project after a while, it will overwrite the changes from productive maintenance.
By comparing the filter values one could evaluate the changes.
For info packages there is the same need. Here you can use table RSLDPSEL. Is there someting like that for DTP?
thanks for any help
Jean

Hi,
the difference you have in the infopack and DTP is
you can have any number of infopackages between the source and PSA but you can have only one DTP between the PSA and datatarget.
so there is no othere way than changing the filter values in the existing DTP.
just chk the filter option and choose the required chars for ur load and activate the DTP.
Ramesh

Get the filter value in the Modify Table interface

Dear Colleages,
I use a Table Interface in order to get aditional values in a web template from a table, but I need the filter value used in the query.
I can get it with "get parameter" sentence:
GET PARAMETER ID '/BI0/OCALMONTH' FIELD MES1
But I cannot when I have a filter instead of a variable, it doesn't work using a variable without "manual entry" option.
¿How can I get this filter value?
Regards,
Jose

Hi Jose,
Use method get_state_infos (http://help.sap.com/saphelp_nw04/helpdata/en/32/ab3a3c24b4a00ae10000000a11402f/frameset.htm)
The dynamic filters are in e_t_slicer.
If this a a static filter or a variable, you can find them in e_t_txt_symbols.
Heike

Unable to select the filter value after query execution

Similar Messages

Maybe you are looking for