Unable to select user when reconnecting mailbox

Hi there,
I am wondering if this is a bug or if anyone can help...
A user was accidentally deleted in AD. We recovered the user successfully and attempted to reconnect the user's mailbox.
When you reconnect, a dialog opens in which we are supposed to select the AD user to whom the mailbox will be connected.
Here is the problem:
(Windows 2003 Domain Controller, Exchange Server 2003 on same box)
When we type in the user's login (Dialog: Select a new user for this mailbox) and click check name it returns an error message saying it can't find it
(An object (User or Other object) with the following name cannot be found:"PatrickK" Check the selected object types and locations for accuracy and ensure that you have typed the object name correctly, or remove this object from the selection)
Now, this is a standard AD "can't find the user" message. This is despite the fact that we are selecting our domain. When we click advanced and search for all users and objects, the only objects that are returned are the users and groups of the local machine; not the domain. This occurs even when we select our domain as the object to search. It seems to ignore it and only search the local machine directory. The same occurs when we try to connect the mailbox to any account on our domain.
Is this due to Exchange and the Domain Controller being on the same box?
Any hints or comments appreciated.
Thanks!

Worked for me too. Also keeps all the permissions of users to the mailbox, but you have to add any extra email addresses back after removing exchange attributes, so make note of them when you delete attributes.
Thanks!

Similar Messages

Unable to select parameters when SSRS 2008R2 report is deployed

I have over one hundred reports deployed to a stand alone SSRS2008R2 server. For almost all of the reports, the standard report parameters are:
DBName (an internal parameter used for an embedded connection string)
Date Range (pre-set date selections such as Last Week, Current Month, Last Quarter, etc)
Location (integer value)
Beginning Date
Ending Date (both dates use the output of Date Range as the default but can be overridden.
The reports have always deployed and have worked using these parameters and sometimes other parameters with no problems for years. I just deployed a new report that uses the same 5 parameters that the other reports use and only those 5 parameters.
The only difference is that instead of Location passing an integer value, it passes a text value (CHAR(8) specifically). When the report is deployed to the server, the Date Range parameter appears and allows the user to select a Date Range but
none of the other parameters show any values and do not allow the user to select a value. The odd thing is that if I change the DataSource to use a specific database and run it on Report Manager through Report Builder, it works fine. When I run
it directly on Report Manager, it does not work. It also does not work when run via the site it is deployed to. I have run SQL Profiler and all it shows is that the stored procedure for the Date Range parameter is run successfully. I also
cannot see anything telling in the Reporting Services log and there is nothing special about the ASP.NET code related to the report. I have spent over 12 hours on this issue and am truly stumped.
Any ideas on how to fix this? This needs to fixed urgently.
Derrick

Hi DerrickVH,
According to your description, you have more than one hundred reports with 5 parameters in SSRS 2008 R2, the reports works fine. You deployed a new report to report server, it has same parameters except data type of location is text. When you run the report,
only Date Range parameter is displayed and allows users to select values from drop down list. If you specify a database and run the report use report builder, the report works fine.
In Reporting Services, we can use dynamic data source through an expression-based connection string. To troubleshoot this problem, please refer to the following steps:
The dynamic database connection string can only be used with an embedded data source, we could not use it with a shared data source.
Specify credentials separately from the connection string.
Make sure there is corresponding values for the parameters in the database.
Verify the connection string and values of parameter DBName is correct.
For more information about Expression-based on connection strings, please refer to the following document:
http://technet.microsoft.com/en-us/library/ms156450.aspx#Expressions
If the problem remain unresolved, i would appreciate it if you could give us detailed information of the report, it’s better to provide screenshot and sample data about the report in design surface, it will help us move more quickly toward a solution.
Best Regards,
Wendy Fu
If you have any feedback on our support, please click
here.

Unable Unlock a User when controlled organization is not assigned as Top

Hi,
When a admin user with controlled organization and organization other than top tries to unlock a user it is throwing an error as "user has no resources assigned".
I tried assigning admin role with controlled orgnaization as Top:Example and controlled organizatios rule but still i am getting the same error.
Please give me an solution

Since you have synched the user with the same userID as that of the obsolete one. Now there exist 2 Users in LC.
But the previous one is marked with Status as OBSOLETE while the recent with status as CURRENT.
Could you please explain how are you fetching the User so that a task can be assigned?
If you are using the Client side APIs to fecth the user, then make sure when using PrincipalSearchFilter you should use principalSearchFilter.setRetrieveOnlyActive().
Have a look at the following JavaDoc,http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/javadoc/index.html
http://livedocs.adobe.com/livecycle/8.2/programLC/programmer/javadoc/com/adobe/idp/um/api/ infomodel/PrincipalSearchFilter.html#setRetrieveOnlyActive%28%29

When copying pic from iPhoto 09 to a file, to burn a CD, after 35 photos it stops copying and I get "Unable to create/users/dividrublesr/ documents/I don't know what is going on.

When copying pic from iPhoto 09 to a file, to burn a CD, after 35 photos it stops copying and I get "Unable to create/users/dividrublesr/ documents/I don't know what is going on. Forgive me for any mistakes, I am a first timer.

Given that the file is selected then the next possibility is that you're exporting two files with the same name. When you do this the export breaks down as the second file would overwrite the first. Check the filenames.
Regards
TD

Unable to synch iPhoto when photos are another user's

Hi
I've had Apple TV for a few months and am unable to figure out how to synch an iPhoto library to our Apple TV. The problem is that the pictures are contained in an iPhoto library from another user on the same computer - my wife has all our pictures on her side of our iMac and I am unable to select her iPhoto library (inside of iTunes on my side of the computer) to synch our pictures to Apple TV (her iPhoto library is grayed out when I navigate to the folder). I have checked all folder permissions and sharing and it seems to be ok for me to edit/view, any thoughts?
Thanks in advance

It's not designed to do that.
Only thing to do would be to either add the photos to your iPhoto library or set up your wife's iTunes as a Shared library for AppleTV and when her account is active you could then Stream photos but not sync them.

Time Machine on my iMac won't open iPhoto. It goes to desktop screen automatically. When I select User/Picture/Iphoto library it only brings up the preview page with the size of the folder. I can't get into the library to look for lost photos.

Time Machine on my iMac won't open iPhoto. It goes to desktop screen automatically. When I select User/Picture/Iphoto library it only brings up the preview page with the size of the folder. I can't get into the library to look for lost photos.

Thank You. This helps me alot to get into the masters and to see events and photos in a utilitarian way, but it is not as easy as viewing the normal iphoto format to find photos. Can I do something else or did I not do something right to not see normal iphoto in Time Machine ?

SharePoint 2010 Slide Library Unable To Select Managed Metadata When Publishing.

Hello,
I'm running into some problems with Managed Metadata when uploading (publishing) slides in a SharePoint 2010 Slide Library. If I have Managed Metadata Site Columns that are set to be required in my slide library, and I publish my slide(s) into the
SharePoint 2010 Slide Library I'm not prompted to enter in my required Metadata before the slide is published. The slide will upload, but then I would need to edit the slide and then enter in the required Metadata.
If I create a new column with a type set to Choice for example, and set it to be required and I upload (publish) a slide I'm now prompted to enter in the required Metadata, but all the Managed Metadata choices are grayed out and I'm unable to select anything.
I'm able to select a Choice for the new column.
Is this a bug within SharePoint 2010 that does not allow me to enter in Required Managed Metadata Tags on uploading (publishing) slides?
Regular document libraries work just fine with required Managed Metadata.
Thanks for any assistance.
v/r
JShidell
v/r JShidell

Hi,
According to your post, my understanding is that the Managed Metadata not prompted to enter value in the required metadata.
I had tested with this issue, and I found the same issue.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

I am unable to select a carrier on my 5s when roaming

Hi - I am unable to select a carrier under "settings" on my 5s. This is a problem I have had with my 4s, 5 and now 5s. I was told by my carrier that the reason was due to me using an old SIM card (32 bit) instead of the required 64 bit SIM card. I upgraded. My SIM card and there has been no change. This is frustrating as I travel a lot, and my network has special rates with MTN in South Africa, so I want to be able to select MTN as my carrier. Currently the phone selects the strongest network when I arrive, and then pretty much stays with that network, unless it loses signal and then it will select an alternative. My IPad 3 has this functionality, so I know it exists (and it was fine on my 3G and 4 previously). Any ideas?

When popup windows open in Encore I am unable to select within that window

Encore 5.5, for instance. . . .I got to file, dynamic link, import sequence and a pop up window comes up. I am unable to select anything within that popup window to tell encore where to find the files I need. This is the case with ANY popup window when working within encore.
HELP!!

No idea in terms of Encore as such. No problems in other programs?
Try another mouse? In another USB port if USB?
I can confirm that in the new project window, for example, you cannot tab or arrow between fields. If your mouse can't select, you're stuck. Same for dynamic link.
Did you use the cleaner tool when uninstalling?
I am not sure if reinstalling Encore necessarily recreates the preferences file. I would try this in any event. "Hold down the Ctrl and Shift keys while choosing Start > Programs > Adobe Encore <version number>. Release the keys after several seconds. The application will not start at this point, but the preferences file will be deleted." The more complete instructions are here at #12:
Troubleshoot damaged projects in Encore on Windows
None of that will matter, of course, if it is a mouse/mouse driver issue.
Just FYI, there are keyboard shortcuts in Encore, but the list is not accessed from within Encore. Go here:
Encore Help | Using keyboard shortcuts

Stuck on "Select Users" on Target Selection when creating a request

Hey guys,
I created a custom request template based off of the "Modify Self Profile" template. When a user tries to create a request based off that template, OIM Self Service asks to "Select Users" on the Target Selection step.
Unfortunately, No users are available to select. And I really only want to modify the logged in user anyway.
Any thoughts?
Thanks.
Edited by: 951612 on Aug 17, 2012 1:01 PM

Shira,
Sorry, just re-read your post. Am I correct in thinking that you want to use the Controllers assigned within SPM to act as the approvers in CUP?
If so, what support pack version are you on as I believe that this only works in SP08 due to a technical bug. This also impacts the SPM Owners acting as approvers.
You may also wish to check the connectors and authorisations of the connector IDs as without being able to read the tables, the approvers may not be found.
Simon
Edited by: Simon P Persin on Nov 16, 2009 4:37 PM

User not found when selecting user in SO from the Portal

I have SCSM 2012 R2, and have setup some Service Offerings, Request offerings.
This one is a "generic" Software request,
1. Select user (query)
2. Select software (list)
3. Write in software if not in the list (text)
I have two users so far that are not showing up when you search name in question #1. Though I do find the user account in the CMDB. Also found in AD, and the AD connector seems to be finishing successfully. I checked the configure
prompts section of the RO, and see that is selects all users where lastname is not Null. I checked the CMDB, and both of these users have first, last, and displaynames... SOoOoO not sure whats going on here.
Any ideas?
Joshua Fuente

I have it set to 5000, and should only have about 3500 AD users. But I have 19k users in the CMDB due to the fact that it creates a new user CI from external sources. (When they email in a ticket).
Also, the RO configuration for the query is set to only search user CIs that have a "lastname". So when I search, so far I am not finding any of the external contacts I believe due to the fact that they only have a username set in the CMDB.
Joshua Fuente

Unable to create new user when logged as SYS or SYSTEM user. Oracle 11g

Hello I installed oracle 11g databse. The installation went OK.
But when I tried to create a new user or alter an existing I always got "ORA-01031: insufficient privileges".
However I was able to alter SYS user when I was loged in as SYS or SYSTEM user when I was loged in as SYSTEM.
I am also able to create new tables, drop tables, query tables, create and drop synonyms and all other things except manipulate with users;
Can anybody tell me where could be the problem?
Thanks a lot in advance.
Message was edited by:
user609545

I have checked the roles DBA, RESOURCE..(I am sorry byt I dont know what is role CREATE). SYS user has all these roles with admin option and default checked.
I am using oracle Enterprise manager, but I dont know where should I click on the red mark? Where can I find it?

File Sharing - External Drive - Unable to add user

Hello,
I am trying to share a folder within an external firewire drive. However, when in the "File Sharing" section, I am unable to add users after adding the folder to the "Shared Folders:". The add user dialog appears, but when a user is selected and the "Select" button is clicked, the user does not appear in "Users:".
The external drive is formatted "Mac OS Extended (Journaled)" with an Apple Partition Map.
Thanks for any suggestions.

try adding this user from finder rather than fro system preferences. select this folder in finder and enter command+i. in the resulting popup go to the permissions section and add the user you want.

Unable to view user login in OS X Lion 10.7.3 startup

unable to view user login in OS X Lion 10.7.3 startup. I had made some changes in icloud settings & by mistake must have checked some option related to username & password. Also when i turn my macbook pro on, i can see the grey background with apple logo, however it does not show my image & login password space. thus i'm unable login to my system. please help

hey ..was able to solve the problem,,had selected "name & password" in "display login window" option of "user & group" of system preference. That's why was unable to view my login username.
How i resolved it - after turning my macbook pro on, i pressed "shift" key...that way it opened in safe mode...& then went to system prefernce & again selected the previous option of "list of users" in display login window option. nyways thanx for helping out

Unable to generate users.xml file

Hi All,
I have installed OCS 10.1.2.0.0.and applied the cumulative patchset and now on OCS 10.1.2.3.0
Now i am trying to migrate users and their mail box from exchange 5.5 running on Windows NT 4 server.
I have installed the esmigration tool on a machine running Windows XP SP2, Outlook 2003 client installed. I ran the tool and successfully created the system profile. Once done when i try extract users which should generate a users.xml file, i get an error saying "Unable to generate users.xml" file. When i look at the log file i can see the error which says invalid domain which is not true. The domain name is right and i have repeated the process more than 10 times, but still keep getting the same error. I tried using IMPA to IMAP as well as with MBOX , but still the same error. Has anyone seen such a behavior ?
So i tried to choose plan B. As i do not have too many users i decided to export the users mail box as a pst file and then import it. This is not a problem, but what i do not know is that what do i need to do to enable coexistence mode on exchange, meaning when an email arrives, it first goes to exchange and then forwards a copy to OCS.Please note on my research i have found some notes on how to do this on exchange 2000 on a windows 2000 server with AD, but i couldn't find anything for Exchange 5.5 on NT4.
Any assistance on this would be very helpful.
Regards,
Dipak

Hi Dipak,
If you do the migration from the Windows 2000 machine with outlook 2000 installed, and connected to Exchange 5.5 via an admin profile, then you will not see this issue.
In case, it is not possible for you to move to new machine where above said environment exists, then you can request for a patch of migration tool that has fix for this issue. Please send an email to [email protected] or [email protected], for the fixed version.
For your co-existence query: Please make use of alternate-recipient setup that exists on exchange 5.5 user properties. So, the emails will be routed to both exchange, and ocs server mailboxes of that user.
If you have any further queries please send an email to [email protected]
Thanks,
Venkat

Unable to select user when reconnecting mailbox

Similar Messages

Maybe you are looking for