Unable to send a test message (XML file) at the runtime workbench..

Hi,
we are not able to send a test message (XML file) at the runtime workbench just to test Idoc's. From the component monitoring, under the integration engine, test message- i have given all the parameters like sender and receiver service, interface namespace with the user id and password details. when i say send message it is throwing error while sending. not even displaying any error to attach here. I beleive it is a configuration problem in the integration directory. what do you reckon guys?
OS- win 2003 DB-Oracle 10.2.0.4
SAP PI 2004s basis SPS 18
Appreciate your much needed help!
Thx
Sree

It is a sender Idoc. we are using sender agreement and comm channel.
Why are you using a channel and agreement for IDOC....we dont need it when IDOC is sender!
All the channels and agreements (if created) are in XI/ PI and we can delete them if they are not required
Edited by: abhishek salvi on Mar 11, 2010 11:49 AM

Similar Messages

CPALookupException while sending a Test message to Adapter engine

Hello Experts,
I am getting following exception while sending a test message to Adapter engine through Runtime Workbench.
Error while sending message: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=<Configured Party>;TP=;FS=<Configured Communication component>;TS=;AN=<Configured Outbound Interface>;ANS=<Configured Namespace>
This scenario works fine when I submits the message through Integration engine. So ID configuration is perfect. Also cache contents are upto date.
Thanks in advance.
Regards
Rajeev

Error is clearly saying that it is unable to find receiver agreement for that particular interface.
Please check your receiver agreement for the interface.
If your receiver agreement is fine then do CPA cache refresh using following URL:-
http://<host>:<port>/CPACache/refresh?mode=full

HT5361 Unable to send photos. Message...Username/password not combatible.

Unable to send photos. Message...username/password not combatable. I'm computer dense...what next?

Have a current backup before proceeding here. Time Machine or otherwise.
If no outbound messages are sent... There are two different server definitions and two different places where you need a user and a password, the first and most obvious setting within mail is for receiving mail; the POP or IMAP setting. Everybody gets that one. To get to the credentials and the password used to send mail messages (the one that folks don't find as easily), Mail > Preferences > Accounts > select the account > switch the Outgoing Mail Server (SMTP) to "Edit SMTP Server List", then find the Yahoo SMTP server entry, then fix the password there.
Here's the Apple mail troubleshooting information.
If that fails, remove the entry and re-add it.
If smaller messages are sent correctly and larger messages are blocked, Yahoo may be restricting the size of the message(s) being sent. Try smaller messages as a test, or use a file sharing service to transfer the images, or maybe wait for the OS X Yosemite Mail Drop feature.
PS and FWIW, this message was originally posted in the OS X Server forum, and you're not running OS X Server here — OS X Server includes various network services, including a mail server — a mail server is what Yahoo is running here, but OS X Server allows folks to configure and run a mail server locally on a Mac Mini or some other Mac configured as a server. Your MacBook Air would then connect into that server, in addition to or in place of the Yahoo server. Like most other mail servers, the mail server within OS X Server can be configured to block larger messages, too.

Since updating to iOS7 I am unable to send or receive messages on my iPad. What can I do to solve this problem?

Since updating my iPad mini I have been unable to send or receive messages. My iPad only wants to recognize contacts with apple products but still won't deliver a message to them. What can I do to solve this problem?

Try restarting the device first..
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
Then press and hold the Sleep/Wake button until the Apple logo appears.
If that doesn't help, try here > iOS: Troubleshooting Messages

When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

I think there is not native rule for this, but you could try a transport rule which removes all attachments over a very small file size like 1KB.
http://blogs.technet.com/b/exchange/archive/2009/05/11/3407435.aspx
CRM Advisor

Unable to send or receive messages for the Btinter...

Hello
I use Windows Live Mail to download my emails. This is working fine on two computers for other BT Internet and Gmail accounts. But one of my main BT accounts consistently receives the following messages on both computers:
Unable to send or receive messages for the Btinternet (xxx) account.
Server Error: 0x800CCC90
Server Response: -ERR inactivity timeout
Server: 'mail.btinternet.com'
Windows Live Mail Error ID: 0x800420CD
Protocol: POP3
Port: 110
Secure(SSL): No
Unable to send or receive messages for the Btinternet (xxx) account. Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems or a long period of inactivity.
Server: 'mail.btinternet.com'
Windows Live Mail Error ID: 0x800CCC0F
Protocol: POP3
Port: 110
Secure(SSL): No
The messages for this account are available via webmail, and sending an email works.
I've tried BT Desktop Help, but this simply sends me in the direction of standard advice pages. I have no reason to think the settings are wrong.
Could anyone suggest what is going on here please?

LesHarg wrote:
Hello
I use Windows Live Mail to download my emails. This is working fine on two computers for other BT Internet and Gmail accounts. But one of my main BT accounts consistently receives the following messages on both computers:
Unable to send or receive messages for the Btinternet (xxx) account.
Server Error: 0x800CCC90
Server Response: -ERR inactivity timeout
Server: 'mail.btinternet.com'
Windows Live Mail Error ID: 0x800420CD
Protocol: POP3
Port: 110
Secure(SSL): No
Unable to send or receive messages for the Btinternet (xxx) account. Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems or a long period of inactivity.
Server: 'mail.btinternet.com'
Windows Live Mail Error ID: 0x800CCC0F
Protocol: POP3
Port: 110
Secure(SSL): No
The messages for this account are available via webmail, and sending an email works.
I've tried BT Desktop Help, but this simply sends me in the direction of standard advice pages. I have no reason to think the settings are wrong.
Could anyone suggest what is going on here please?
Hi. Welcome to the forums.
For starters, the recommendation by many people is to uninstall BT Desktop help.
If this has always been the case, rather than a sporadic issue, then it could be an account problem that seems to plague some accounts - and has done for years. Hopefully the changeover from Yahoo! to Critical Path will cure this particular issue. Try the other settings mentioned by Keith.
Even though some accounts are fine, there is still a possibility that your local security software can interfere. For example if you have email scanning turned on - then this can be turned off to see if that helps.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Unable to send or receive messages?

I bought a new iphone 4 and after syncing was unable to send or receive messages?

Hi,
Welcome to the  Discussions
The First Step is to try changing the Style of the Messages.
Open a Chat Window to Anybody (you do not have to Send anything you an only do this when a chat window is open).
Go to the View Menu > Messages option
In there change it from balloons to anything else.
Try a Text Chat with someone.
If this does not seem to be it try changing the Font choice in iChat > Preferences > Messages.
The Default is Helvetica and certain variants of this Font can cause problems in iChat (Helvetica Fractions for instance).
If changing the Font works use the Font Book to check the Font. (presuming you re-installed any Font you may have chosen for iChat.)
9:15 PM Friday; March 18, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

When i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
Q1: I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
Q2: The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
1.Builder for Integration Repository
2.Builder for Integration Configuration
3.System Landscape Directory
4.Runtime Workbench
5.Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
Q3: The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li

I am unable to send videos through messaging since the 7.0.2 upgrade, I have a iPhone 4 iPhone 4, iOS 7.0.2

I am unable to send videos through messaging since the 7.0.2 upgrade, I have a iPhone 4
iPhone 4, iOS 7.0.2

Does you carrier support MMS?

Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. Is anyone else having any similar issues?

Since last weekend (3-15-15) I have been unable to send/receive text messages with a friend who has Sprint service. The messages send with no errors on either side, but neither side is receiving the messages. It seems to be only this one person affected by this issue, everyone else that I've tried sending messages to has responded with no trouble. Is anyone else having any similar issues?

Retrohacker, Your text messages are too important to be missed! Let's figure this out, together. Are you able to successfully make and receive calls from your friend? Which phone do you have with us? Any new messaging applications or changes that you can recall on the phone since this issue began? Please share details so we can get to the bottom of this for you. TanishaS1_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

HT201270 Unable to send or receive messages after carrier update

Unable to send or receive messages after carrier update

Hi
A couple of follow up questions:
1. Reset your device - no data loss - Restart or reset your iPhone, iPad, or iPod touch - Apple Support
2. Can you:
a. make phone calls
b. Surf the web
i. In WiFi
ii. Without WiFi
Please post your answers -
Thanks
(789)

TS2755 unable to send pictures via messaging

I am unable to send pictures via messaging. Whenevr i open messaging and try to send a pic my camera is not active i am unable to click on it.

MMS is a carrier feature, so contact your cell phone provider.

Help on how to read the content of an XML file from the payload

I have a receiver channel / mail adapter, that sends e-mails with a XML attachment.
Im trying to write a Bean, that should make it possible to rename the attached XML file dynamically.
In the Bean I want to read the content of the attached XML file, it could be the order number.
The filename should then be Order number.XML.
Can anyone help me with how to read the content of the XML file from the payload.
Frank

hi,
check this: http://jakarta.apache.org/poi/

Approach to parse large number of XML files into the relational table.

We are exploring the option of XML DB for processing a large number of files coming same day.
The objective is to parse the XML file and store in multiple relational tables. Once in relational table we do not care about the XML file.
The file can not be stored on the file server and need to be stored in a table before parsing due to security issues. A third party system will send the file and will store it in the XML DB.
File size can be between 1MB to 50MB and high performance is very much expected other wise the solution will be tossed.
Although we do not have XSD, the XML file is well structured. We are on 11g Release 2.
Based on the reading this is what my approach.
1. CREATE TABLE XML_DATA
(xml_col XMLTYPE)
XMLTYPE xml_col STORE AS SECUREFILE BINARY XML;
2. Third party will store the data in XML_DATA table.
3. Create XMLINDEX on the unique XML element
4. Create views on XMLTYPE
CREATE OR REPLACE FORCE VIEW V_XML_DATA(
Stype,
Mtype,
MNAME,
OIDT
AS
SELECT x."Stype",
x."Mtype",
x."Mname",
x."OIDT"
FROM data_table t,
XMLTABLE (
'/SectionMain'
PASSING t.data
COLUMNS Stype VARCHAR2 (30) PATH 'Stype',
Mtype VARCHAR2 (3) PATH 'Mtype',
MNAME VARCHAR2 (30) PATH 'MNAME',
OIDT VARCHAR2 (30) PATH 'OID') x;
5. Bulk load the parse data in the staging table based on the index column.
Please comment on the above approach any suggestion that can improve the performance.
Thanks
AnuragT

Thanks for your response. It givies more confidence.
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
TNS for Linux: Version 11.2.0.3.0 - Production
Example XML
<SectionMain>
<SectionState>Closed</SectionState>
<FunctionalState>CP FINISHED</FunctionalState>
<CreatedTime>2012-08</CreatedTime>
<Number>106</Number>
<SectionType>Reel</SectionType>
<MachineType>CP</MachineType>
<MachineName>CP_225</MachineName>
<OID>99dd48cf-fd1b-46cf-9983-0026c04963d2</OID>
</SectionMain>
<SectionEvent>
<SectionOID>99dd48cf-2</SectionOID>
<EventName>CP.CP_225.Shredder</EventName>
<OID>b3dd48cf-532d-4126-92d2</OID>
</SectionEvent>
<SectionAddData>
<SectionOID>99dd48cf2</SectionOID>
<AttributeName>ReelVersion</AttributeName>
<AttributeValue>4</AttributeValue>
<OID>b3dd48cf</OID>
</SectionAddData>
- <SectionAddData>
<SectionOID>99dd48cf-fd1b-46cf-9983</SectionOID>
<AttributeName>ReelNr</AttributeName>
<AttributeValue>38</AttributeValue>
<OID>b3dd48cf</OID>
<BNCounter>
<SectionID>99dd48cf-fd1b-46cf-9983-0026c04963d2</SectionID>
<Run>CPFirstRun</Run>
<SortingClass>84</SortingClass>
<OutputStacker>D2</OutputStacker>
<BNCounter>54605</BNCounter>
</BNCounter>
I was not aware of Virtual column but looks like we can use it and avoid creating views by just inserting directly into
the staging table using virtual column.
Suppose OID id is the unique identifier of each XML FILE and I created virtual column
CREATE TABLE po_Virtual OF XMLTYPE
XMLTYPE STORE AS BINARY XML
VIRTUAL COLUMNS
(OID_1 AS (XMLCAST(XMLQUERY('/SectionMain/OID'
PASSING OBJECT_VALUE RETURNING CONTENT)
AS VARCHAR2(30))));
1. My question is how then I will write this query by NOT USING COLMUN XML_COL
SELECT x."SECTIONTYPE",
x."MACHINETYPE",
x."MACHINENAME",
x."OIDT"
FROM po_Virtual t,
XMLTABLE (
'/SectionMain'
PASSING t.xml_col <--WHAT WILL PASSING HERE SINCE NO XML_COL
COLUMNS SectionType VARCHAR2 (30) PATH 'SectionType',
MachineType VARCHAR2 (3) PATH 'MachineType',
MachineName VARCHAR2 (30) PATH 'MachineName',
OIDT VARCHAR2 (30) PATH 'OID') x;
2. Insetead of creating the view then Can I do
insert into STAGING_table_yyy ( col1 ,col2,col3,col4,
SELECT x."SECTIONTYPE",
x."MACHINETYPE",
x."MACHINENAME",
x."OIDT"
FROM xml_data t,
XMLTABLE (
'/SectionMain'
PASSING t.xml_col <--WHAT WILL PASSING HERE SINCE NO XML_COL
COLUMNS SectionType VARCHAR2 (30) PATH 'SectionType',
MachineType VARCHAR2 (3) PATH 'MachineType',
MachineName VARCHAR2 (30) PATH 'MachineName',
OIDT VARCHAR2 (30) PATH 'OID') x
where oid_1 = '99dd48cf-fd1b-46cf-9983';<--VIRTUAL COLUMN
insert into STAGING_table_yyy ( col1 ,col2,col3
SELECT x."SectionOID",
x."EventName",
x."OIDT"
FROM xml_data t,
XMLTABLE (
'/SectionMain'
PASSING t.xml_col <--WHAT WILL PASSING HERE SINCE NO XML_COL
COLUMNS SectionOID PATH 'SectionOID',
EventName VARCHAR2 (30) PATH 'EventName',
OID VARCHAR2 (30) PATH 'OID',
) x
where oid_1 = '99dd48cf-fd1b-46cf-9983';<--VIRTUAL COLUMN
Same insert for other tables usind the OID_1 virtual coulmn
3. Finaly Once done how can I delete the XML document from XML.
If I am using virtual column then I beleive it will be easy
DELETE table po_Virtual where oid_1 = '99dd48cf-fd1b-46cf-9983';
But in case we can not use the Virtual column how we can delete the data
Thanks in advance
AnuragT

Where can I find an example of a vi which reads a xml file using the Labview schema (LVXMLSchema.xsd)?

Where can I find an example of a vi which reads a xml file using the Labview schema (LVXMLSchema.xsd)?
�Unflatten From XML� is of little use in parsing because it requires the data type. So it seems that the user has to parse each data value, and then �Unflatten From XML� can help a little.
I would like to see NI provide a VI for parsing it�s own schema.

LabVIEW's XML functions are another way of saving data from controls and indicators that is in a more standardized format. If you look at the Unflatten From XML shipping example, it shows taking the data that you would normally send to a Digital Wveform Graph and converting it to XML instead. This data is then unflattend from XML and wired to the graph. Since you know what you wrote to the file, this is an easy thing to do. If what you are looking for is a way to look at any data in any LabVIEW XML file, then you are right, there is not a VI for that. However, I do not believe that that was the intention of the XML functions in the first place.
By wiriting data in XML, this allows other applications outside of LabVIEW to parse and recognize the dat
a. In LabVIEW, you would already know the types and can place a generic item of that type. The issue of knowing the type is that you need to know the type of the wire that comes out of the Unflatten function so that the VI will compile correctly. You could always choose a variant value to unflatten and then do some parsing to take the variant a part. Maybe this will help you out.
See this example for using the Microsoft parser for XML. (http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=B123AE0CB9FE111EE034080020E74861&p_node=DZ52050&p_submitted=N&p_rank=&p_answer=)
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

Unable to send a test message (XML file) at the runtime workbench..

Similar Messages

Maybe you are looking for