Unable to send FAX of Delivery Note Adobe form - Not visible in SOST

Hello,
I have created a delivery note adobe form and the output medium has been configured as FAX. But when we are doing any delivery in VL02N, the FAX output is not going to SOST.
Let me tell you that, for printing it's working fine. It's going to SP02 successfully.
Thanks
Satya

Hello Satya,
This issue may be due to several reasons.    Here are some of the reasons.
1. check the settings in the of fax in scot transaction.
2. check the whether any virus scan profile is active, if it is active, check whether any default profile is maintained or not.
Please provide me the procedure or function module which you are using to send fax.  so that it will be easy to understand the type of the error.  Also check whether email is working for the above scenario
thanks,
Rakesh.

Similar Messages

  • Unable to send fax from computer

    Hi,
    I'm unable to send faxes from my computer (e.g, from Word). I get a message: "The device is disconnected or powered off", which is not true.
    The printer is an HP  LaserJet 1536dnf MFP.
    The OS is Windows 7 Ultimate, 64-bit, with 8 GB RAM.
    I have updated to the latest firmware from the HP site, and have downloaded the latest appropriate driver package for this printer from there as well (hp_M1530_MFP_full_Solution_usb_n_w.exe)
    The installation goes normally, and there are no error messages.
    The printer is working fine. I am able to print and scan from the computer without problems. I am also able to fax directly from the printer without problems. The only problem is not being able to send a fax directly from the computer.
    For instance, in Word (the latest version), when I print to the HP fax printer (which has indeed been installed correctly on the computer), I get a message that the doc has been send to the printer. But no screen pops up letting me type a phone number, and after about 1 minute I get this error: 
    Have been on the phone for several hours to HP support, and although they did a complete uninstall, and reinstall, the problem persists.
    I also downloaded and ran this file from HP: HPLJ_M1530_Fax_IE_11_utility.exe, which is meant to resolve a very similar issue for people who have this Microsoft KB installed (KB2898785), which somehow interferes with the fax exactly as I have described. I do indeed have that Windows update installed. However, running the file did not solve the problem, and there seems to be no way of uninstalling that KB.
    So I am at a loss, and would appreciate any help, if anybody can think of anything.
    Many thanks
    Tim

    Hi @Tim613 ,
    I see by your post that you are unable to send a fax from the computer. I would like to help.
    Since you are able to print and scan from the computer, you don't have a communication issue. The printer will also send a fax, so it isn't a hardware issue. It sounds more like something possibly on the computer is blocking the fax communication.
    The Toolbox doesn't support Windows 7 64 bit, but you should still be able to fax through Third Party Software. (Word) Which you have already tried and it didn't work.
    I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
    Try sending a fax again.
    Then you will have to go back and enable the startup programs and turn the Antivirus Software back on again.
    Let me know the outcome.
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • I am unable to send attachments. I get "adobe flash has crashed".

    I am unable to send attachments. I get "adobe flash crash"

    Go step by step and test.
    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
        Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Follow the prompts.  Click Safari in the menu bar and then Quit Safari .
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
    If this doesn't help:
        Uninstall Flash.
        http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
        Reinstall Adobe Flash.
        http://get.adobe.com/flashplayer/

  • Adobe form not dispalying content in portal

    Hi Experts,
    We have one issue in Portal.
    One user clicked on UWL item in portal its opening subscreen as like behaviour.
    In subscreen adobe form its not displaying any content and its displaying only approve and reject buttons.
    we checked user browser settings and adobe version settings and user authorisations .
    All are Ok.
    But adobe form not displaying content.
    Thanks,
    Bheem V.

    Hi Bheem,
    The problem is not clear to me. Is this a user specific issue?
    Thanks & regards,
    Sanoosh

  • Make Adobe form not editable and Password protected

    Hi All,
    Want to add a button on adobe form , when user clicks the button then the form shouldn't allow to edit fields anymore.
    I think this can be coded under script editor.
    Please anybody specify the syntax to make adobe form not editable.
    And my another issue is whether we can handle adobe forms password protected through SAP. kindly specify any approach.
    Thanks in advance.
    Regards,
    Ashweeni.

    Hi Ashweenip,
    PASSWORD PROTECTED PDF FORMS:
    Go through these Threads
    [Password protected PDF file|Re: Password protected PDF file]
    [pdf with password encryption|pdf with password encryption;
    Regards
    Pradeep Goli
    Edited by: Pradeep Goli on Feb 4, 2010 11:13 AM

  • Can any one please send me study material on ADOBE forms (used in SAP)

    Can any one please send me study material on ADOBE forms (used in SAP).

    Hi,
    http://wwwimages.adobe.com/www.adobe.com/enterprise/partners/pdfs/bwp_interactive_forms_adobe.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
    /people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/4adf7ba13c4ac1b4600d4df15f8b84/frameset.htm

  • Unable to send fax with verizon (not fios) landline

    Recently switched from comcast 2 verizon (not fios) and cannot send faxes. I have a dell all in one printer Photo 926. Can someone please help, I need my fax asap! Thank you!

    Do you have a dialtone at the phone jack which the fax machine uses?  I would recommend connecting a standard phone to this jack to check for dialtone.
    I do not know what settings are available for your fax machine, but it may also be worthwile to reset the fax machine to factory defaults and start from there.  We do not limit your ability to send faxes.
    If this does not resolve your trouble, please send me a Private Message and we can work on a resolution.

  • Unable to send Fax

    While I was able to send faxes in the past, suddenly I cannot. Now when I click print - send fax and fill in the info to send I get a "error while printing"message. The "modem" field in the fax dialog box reads "no fax selected" When I click "show fax list" the box is empty. I have gone to help, system preferences-print and fax, and searched the forum etc. without finding a solution. Any new ideas? Thanks. (I did recently perform my first "cleaning" operation with OnyX)

    Is it showing up in Printer Setup Utility's Printer List or in Printer Setup Utility's Fax List?
    Where are you seeing this checkbox and stuff? When I launch /Application/Utilities/Printer Setup Utility, I don't get any sort of windows with Internal Modem listed (in either the Printers window, where it doesn't belong anyways) or in the Fax window, with any sort of checkbox.
    Or are you talking about System Preferences Print&Fax? I see checkboxes, but Internal Modem does NOT show up in the Printing List in my Sys Prefs' Print&Fax, and mine works. Yours must be mistakenly thinking its a printer and not a fax driver. Search your hard drive for Internal Modem or Internal Modem.app and tell me where you find it. Mine is in my User Library folder's Printers folder, along with HL-1440 series.app, which belongs to my Brother laserprinter. Other user accounts on my computer that have never sent a fax before do not have Internal Modem.app in their User Library folder's Printers folder.
    Have you considered, in an act of desparation, to reapply the OS 10.4.10 combo update? If there are components of something missing from system software, or corrupted components present, that should reinstall them. Just remember to verify your disk before you start, and repair permissions both before and after you reapply the combo update. I would, however, be tempted to either delete this Internal Modem thing, or at least temporarily relocate it to your Desktop or something, before reapplying the combo update, and then recreate your SysPrefs Print&Fax Faxing setup, then do the FAX PDF stuff again from Text Edit.

  • Unable to send fax Fax-HP Officejet Pro 8500 A910

    I have a Fax-HP Officejet Pro 8500 A910 All-In-One. I had to reinstall it. It is telling me that I have installed it correctly and is on the network. I installed without using a USB. I am on wireless networking.
    I have tried several times to send a fax.  I'll imput the numbers, then I'll hear the ring. It continues to ring several times, then it will hang up and print out a notice saying, "No answer". I know I have the correct number. I tried another fax to a different number and receive the same outcome.

    Welcome to the forums @Tomalene ,
    I understand you are having some troubles with sending faxes. I would suggest checking out the guide below and trying the steps. Afterwards you should be able to fax again!
    Cannot Send or Receive Faxes
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Unable to send fax from pdf in XI

    How can I send a fax from a pdf in XI?

    There is the obvious, print the pdf and bring it to a fax machine. Since that is not what you want you must tell us about your OS and the fax software you are using on your computer. In most cases, you can print to a fax printer driver and that should work.

  • Unable to send fax via internal modem

    Until two days ago our internal modem was working fine we have been able to send faxes with no problem. I have ran disk first aid and repair, but the modem still is not able to send a fax. We have check the phone line and there is a dial tone up to the computer, but not dial tone in the computer. Is my modem dead or is there another way to fix the problem.
    Thanks

    If you want to use the modem to send and receive faxes, then you don't want to have the Network trying to control it, you should disable the modem port in the Network prefs and use only the Ethernet port. You can use the Network prefs to troubleshoot to ensure that the modem is in working condition, but you can't have the network dial-up taking control of the modem at the same time as you want to be waiting for a fax or sending a fax. This can cause the modem to get hung, and you will get the waiting behavior that you described.
    You should just be able to receive faxes by checking the "Receive faxes on this computer" button in the Print & Fax Prefs. If you had an external modem you could see some activity lights come on as soon as you check the box as it goes into standby to answer a call mode, with an internal the only way to know it's working is to send yourself a fax.
    To send a fax, I think you might need to configure a Fax printer, if you don't seem to have one already. Click the "Setup Fax Modem..." button at the bottom of that Print & Fax Prefs. IF you launch /Applications/Utilities/Printer Setup Utility can you select from the View Menu: Show Fax List and does anything show up in the list? You should have a Fax List and fax printer in that list similar to your Printer List and whatever printer you have installed.
    To check if the modem is even working you may have to use some modem terminal utility like ZTerm that will let you type simple commands and check the modem response. For example AT should result in an OK. With the internal you can't check the activity lights to see if you are receiving data or sending data, so I'm not sure how else you can verify the internal modem is actually functioning. It might be worthwhile checking that first, or if you know you can use it for dial-up, I still use my modem as a backup for when DSL goes out (rarely).

  • "Let others send fax through this computer" - problem: modem not showing up

    I have a macbook that does not have an internal modem for faxing. I am using another networked mac in our office that has an internal modem for faxing. I have set up the printing and fax preferences to "let others send faxes through this computer" on the mac that can fax. It has worked in the past, but this morning when I went to fax from my macbook, I cannot see the modem in the mac that can fax. I have also checked with other macs in the office and they can't see it either. Network is okay, I can access the computer through connect to server, I have repaired permissions, restarted and still no modem showing up or shared printers showing up. I have not updated anything on the mac that can fax. Any ideas?

    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1801.html
    Strange, not sure why it's not showing up.
    Have you confirmed that the fax printer is working on the host Mac? Maybe try turning off the sharing and deleting the existing Fax Printer in the Fax List with /Applications/Utilities/Printer Setup Utility, and creating the Fax Printer again, and turn on sharing again.

  • Unable to send or receive texts, talk to text not working, unable to talk to Siri. Two days now. Is it the phone? Is it the network? Do I really have to go dig out my old Blackberry to send a text after buying a $400 phone?

    For the past couple days I have been unable to send or receive texts, can't use voice to text, can't talk to Siri.
    Three reasons I have the phone.
    $400 for a new paperweight. Just what I needed for Xmas!

        We certainly don't want to lose you as a customer megarga! Let's partner together and get your wireless concerns addressed. When you received the iPhone, did you set it up as new or restored from a previously owned iPhone/Apple ID? What model iPhone do you have? If you have restored from a previous iPhone then how much available device memory do you have? As you share the details then we can customize a solution for you.
    Thank you…
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Problem while sending fax through a SAP Smart Form

    Hi,
    I am trying to send fax through a smartform but it is not working, please see the details below.
    I am calling the Function Module "SSF_FUNCTION_MODULE_NAME" in a PAI event.  After storing the FM name "/1BCDWB/SF00000029"in a local variable "ls_frm_name", I am using that for printing the Form and at the same time to fax out the same by passing the following export parameters.
    control_parameters type ssfctrlop with values
      la_ssfctrlop_struc-device      = 'TELEFAX'.
      la_ssfctrlop_struc-no_dialog   = 'X'.
      la_ssfctrlop_struc-langu       = ls_supplier_info-spras.
    output_options type ssfcompop with values
      ls_ssffaxop_struc-tdteleland   = ls_supplier_info-land1.
      ls_ssffaxop_struc-tdtelenum    = lfa1-telfx.
      ls_ssffaxop_struc-tdfaxuser    = syst-uname.
      ls_ssffaxop_struc-tdnoprint    = 'X'.
    along with "fax_details  = ls_zap1_fax_details" declared as interface parameters to the Smart Form.
    But the Function Module is throwing following exception and not sending any Fax.
    SY-MSGID-->OL
    SY-MSGNO-->356
    SY-MSGV1-->NOAUTHORITYCHECK
    Do I need to pass any other values to the FM, I felt that this is not an authorization problem after debugging.
    Can any one please help me in handling this exception and send the fax,
    Thanks,
    Srinivas.
    Edited by: Venkata Srinivas Inavilli on May 20, 2008 2:40 PM

    may it be that in those cases where it doesnt work, that you got no fax number?
    Since it works soemtimes, it seems there are no errors, but rather in some cases some important info is missing, fax number may be one of thsoe important info in a FAX scenario.

  • Adobe form not opening directly through reader 8.1.1 but through browser.

    Hi Gurus,
    Two of my adobe forms which were opeinig fine in 7.0.9 are not opening in adobe reader 8.1.1. We applied the required hotfixes as per the SAP note. but still it does not open in reader 8.1.1.
    We are in NW04s SP9
    Tried both with xACF and ZCI layouts.
    Kindly consider.Any suggestions are welcome.
    Thanks and Regards,
    Anto.

    Hi Dezso,
    Thanks for your prompt response.
    Currently, I'm having problem with the Adobe Reader save prompt displayed too often and the message is asking, "Do you want to save?"
    Any helps would be greatly appreciated and points will be rewarded.
    I'm unable to find any notes or documentation regarding this problem.
    Best regards,
    Niki

Maybe you are looking for