Unable to send Mail from POP account

I have an Iphone 4 and have upgraded the IOS from 5-1 to 6.1.3. Since then I have been receiving all my mails but i have been unable to send mails from my POP account. the notification "Cannot Send Mail. A copy has been placed in your Outbox. The receipient, "xxyyzz @ gmail . com " was rejected by the server" displayed. Please Help. the same thing happens when I configure my POP account on my Son's Iphone4, and there is no problem in receiving and sending mails from my Outlook. Please Help!!!!!
Can i revert back to IOS5.1.1?????

Contact your email provider and get the correct settings to use for the outgoing mail server (SMTP) on a mobile device. If it's email provided by your ISP, they have likely blocked email from outside their network from relaying to prevent spam.

Similar Messages

  • "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    lots of people seem to be havgin a problem sending email from iCloud webmail.
    does your email address have uppercase characters in it?
    if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

  • Cannot send email from pop account when in 3G, will send in WIFI

    I cannot send email from pop account when in 3G, will send in WIFI.
    I thought it was the SMTP server first.. but when i config my WIFI, suddenly the emails that i tried to send, left my outbox and sent.
    Any idea's

    The SMTP server you are using with Wi-Fi would be the outgoing server of your internet service provider... this is likely why that's working.
    SMTP servers specific to a ISP would not work on the 3G network. You would probably need another SMTP server. One from your cell provider?

  • HT204075 I am not receiving mail to one of my email accounts. I can send mail from this account and all other accounts seem to be working.

    I am not receiving mail to one of my email accounts. I can send mail from this account and all other accounts seem to be working.

    Is this work email account on a BES server?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Sending mail from alias accounts Sweden. iPhone.???????

    Sending mail from alias accounts Sweden.
    STILL cant send mail from my iPhone via one of my e-mail alias accounts???
    sooo much time has gone by
    so many updates to iPhone and my operating system
    new iPhone on the way here and...
    still cant send mail from my iPhone
    yes i can set up another account through a third party
    NO i dont want this. i expect to be able to use the mac mail i already have...
    anyone know whats going on?
    Have i missed apples solution to this.
    anyone know how its done and...
    please dont say sign up with someone else or create an account with someone else
    For the record yes i can use my mail from my iPhone BUT BUT BUT it shows my ORIGINAL email account address BAD BAD BAD.
    answer anyone!!!

    I have to agree with you , I too was disappointed to see that with IOS 4 on my iphone I still cant send from an alias. This is a feature thats available with the .me web access so why not the iphone mail app? If they can't do it, then at least let me be able to use .me via safari on the iphone and ipad.
    Joe
    Message was edited by: Joe Tye

  • Can't send mail to POP Account which has attachment or signature

    Since installing the Update 10.4.6, I have been unable to send email to my pop account which has either a signature or an attachment (when there is no attachment or signature it works fine). I have cleared the caches using tiger cache cleaner. I have tried adding a new user account to mail. It doesn't work in Entourage either. I've reinstalled Mail. What else do you recommend?
    Prior to installing the update, mail worked great for over a year!
    Additional Information:
    Whenever I press the send icon, the mail message disappears, then in the activity viewer it gives the message “Delivering message / Sending data (28% done) and hangs there for a long time and finally gives the following message:
    Cannot send message using the server XXX
    Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
    Whenever I send an email with text and a signature, the activity viewer it gives the message “Delivering message / Sending data (100% done) and hangs there for an extremely long time and finally gives the same message.

    Mario_MM wrote:
    For sending mail the POP server is not important what you need to check are the settings of the SMTP server. Verify the settings of the SMTP server again and compare it to your settings on your iMac.
    Checked SMTP settings and they are identical to the working iMac. I had not changed any settings on my MBP when it stopped sending, plus it did work briefly last night with those settings, so I don't see how it could have anything to do with my settings being incorrect.
    The only thing even remotely different that I did prior to this happening was to use it away from home. I was out of town and used someone else's wifi to send some emails, but can't see how that should matter. It was the same ISP that I use at home, so I never even had to change settings for remote access. I never touched a thing, but when I got home I could no longer send emails.

  • Cannot send mail from .mac account in Entourage

    I am a new mac user so my troubleshooting skills are very weak. Until about one week ago, i was able to send mail from both my hotmail account and my .mac account. Now, i get this error (just on my .mac account):
    An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic.
    i read through much of the support articles, but did not find my specific error. can anyone help??
    thank you
    mknz
    MacBook Pro   Mac OS X (10.4.7)   new mac user
    MacBook Pro   Mac OS X (10.4.7)   new mac user

    it may be that your server (internet provider) has just started blocking outgoing mails not authenticated by them.
    Go to your account set up...
    and fill in the following details.
    SMTP SERVER: smtp.mac.com
    then click on advanced sending otions...
    click on override default SMTP port... type 587
    click on SMTP servber requires authentication...
    use same setting as receiving mail server.
    try this...

  • How do I specify the gmail outgoing server if I have multiple gmail accounts in my mail? I have 2 business accounts and when I send mail from one account, it is sent from the other account and the sending email is not from the correct account.

    I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually goes out as if it is from the other gmail account. I can't have that happen because one is my job, the other is a personal business account and unfortunately, the mail from both gmail accounts want to send through the personal business account. How do I make it send from a specific gmail account? I even tried deleting the accounts and setting them up again hoping I set it up wrong in the first place, but to no avail, it is still doing the same thing except this time I set the job account up first and then the personal business account and now everything goes from the job account! The only good thing is that the incoming messages work properly and they go into the correct inbox. Somebody please fix my outbox!

    In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account.  The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
    Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
    Ernie

  • I want to bcc myself when sending mail from one account but not another. When I check "automatically bcc myself", it bcc's me from both accounts.  Can I set this to work with only one account?

    I have two mail accounts on my Mac.  I want one account to bcc me when I send emails from that account.  I checked "automatically bcc myself" under mail>preferences>composing, but both accounts bcc me when sending mail.  Can I set this to only bcc myself from one specific email account? Thanks.

    It does not make sense that your ssh does not have a dash capital Y (-Y) option. It is in "man ssh", and my 10.6.6 has the -Y option, and I've had a -Y option since at least Tiger (10.4) days.
    My ssh is in /usr/bin/ssh
    I'm not very good at X11 issues, so I'm just throwing ideas out there.
    Does your broken account have a $HOME/.ssh/config file, and if so, what is in it?
    Does the broken account have any $HOME/.x* or $HOME/.X* files that X11 might be reading to configure your X11 behavior differently from the new test account?
    $HOME/.Xauthority
    $HOME/.Xdefaults-<hostname>
    $HOME/.Xresources
    $HOME/.ICEauthority
    $HOME/.keymap.km
    The above are a few names I found looking through "man X"
    While I'm thinking about it, I assume that when going to the server, you are using the exact same user account on the server, so that you have a constant at least at that end.
    Have you tried trashing your
    $HOME/Library/Preferences/org.x.X11.plist
    file, to see if that is affecting the broken account?
    Again, I am just throwing out ideas to see if anything sticks.

  • Some Users on randomly basis unable to send mails from 2003 exchange to 2007 Exchange users Internally.

    Hi All,
    Some Users on randomly basis are unable to send e-mails from 2003 exchange to 2007 Exchange users Internally.
    They are sending mails from outlook and users from 2007 dont have any issues.
    But sometime mails from 2003 to 2007 goes without any issue.
    The NDR reported is as below.
    From: System Administrator
    Sent: 22 February 2014 15:59
    To: XYZ
    Subject: Undeliverable: Regarding Test Message
    Your message did not reach some or all of the intended recipients.
         Subject:  Regarding Test Message
         Sent:     22/02/2014 15:59
    The following recipient(s) could not be reached:
         XXX,XYZ on 22/02/2014 15:59
               The message contains a content type that is not supported
               <HubServer.Domain.UK #5.6.0 smtp;554 5.6.0 STOREDRV.Deliver.Exception:PropertyValidationException; Failed to process message due to a permanent exception>

    Hi,
    According to the NDR, I found this point "The message contains a content type that is not supported".
    Please verify whether the un-delivered messages contain some Sensitive
    Information,  signatures or attachments that cannot pass the Exchange 2007 Edge server. Please also check the content type of the un-delivered messages.
    Found a useful KB for your reference:
    Frequently asked questions about MIME and content conversion in Exchange 2000 Server and in Exchange Server 2003
    http://support.microsoft.com/kb/836555/en-us
    Hope it is helpful
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Unable to send mails from Azure SharePoint 2010 VM

    Hello All,
    I have created Site-to-Site VPN in azure to my on premise, and i have configured SharePoint 2010 environment in that. Then i have configured outgoing mail settings for a web application in that VM, but i am unable to send mails to external domain from it.
    But i am able to send mails from my on premise VMs to external domains. 
    Thanks

    Hey There,
    Azure does not support smtp relay, you may want to use SendGrid (which working with Microsoft Azure).
    After registration you get 400 E-mail per day free of charge.
    From technical aspects youll get SMTP server, Username & Password which you can fill in your application.
    Hope it helps.
    Ido

  • Will not send mail from new account

    (I don't see a category for "mail" program on the discussions.)
    I have a new account, but cannot get it to send mail from it. I get the message to try a different server, but no server works.
    Thanks

    Hi Mimi,
    I reported your topic to have it moved to the Mac OS X v10.3 & earlier > Mail & Address Book forum.
    It should be moved shortly.
    In the meantime, it would help if you could post back with which OS version you are using (ie. OSX 10.3.9 ?) and who your ISP is (Internet Service Provider).
    littleshoulders

  • Cant send mail from 1 account

    I have 3 mail accounts on my powerbook, one is bellsouth. When I try to send mail from the bellsouth account, it tells me it can't use the selected server. Bellsouth won't let me use other servers ( including .mac accounts) so if I have to send mail when I'm connected via bellsouth I have to use that account. I'm able to send via bellsouth from my other notebok ( windows) so the problem has to be on the powerbook somewhere. I've deleted the account from mail, and re-added it a few times, all to no avail.
    any suggestsion would be greatly appreciated!
    I'm running the latest build of Tiger.

    changed the port to 25, everything working fine now.

  • Mail 10.8.3 not sending mail from intended account

    Since upgrading from 10.8.2 to 10.8.3, my wife is having a new problem where Mail is not sending mail from the intended account. 
    She has 2 mail acocunts, and normally sends most e-mail from one of them.  That mail account is set as the default to send messages from. 
    Now when she composes messages, it sends them from the other account, even if she has made certain that the pull-down choice of "send message as..." is set to the correct/desired mail account.
    The only way she was able to stop this was to deactivate the other e-mail account in Mail's preferences.
    Is anyone else having this problem?

    Hi.
    Please click on the Mail > Prefrence > Account.
    then click on the first account on the left side & Uncheck the option 'Use onlythis server'
    repeat the step for the second account aswell.
    this should fix your issue.
    Kind regards,
    Ayaz

  • I-Pod touch will only send mail from defualt account.

    I have a 4th gerneration I-pod touch.  I always keep it updated.
    I'm having trouble with the e-mail.  It will only send mail from the default e-mail account.  If I go to the "From" line on an outgoing e-mail and select another e-mail address it doesn't make a difference.  It will still send the message from the default account even though the alternate e-mail was listed in the "From" line.
    Please help,
    LJ

    Hi Mimi,
    I reported your topic to have it moved to the Mac OS X v10.3 & earlier > Mail & Address Book forum.
    It should be moved shortly.
    In the meantime, it would help if you could post back with which OS version you are using (ie. OSX 10.3.9 ?) and who your ISP is (Internet Service Provider).
    littleshoulders

Maybe you are looking for

  • Sharing iphoto library with different users

    I have a new imac, set up different users for myself and my wife. We have been uploading our photos to iphoto on my account and evertime she would like to access them she has to log out and into my account. Any way to share the library between users?

  • 24" iMac Screen Brightness Bug and others

    Hi, There seems to be some serious issues with the 24" iMac. About 6 days ago I bought a 24" iMac (2.66 Mhz model w/4 GB RAM + 640HD). Out of the box it had Leopard 10.5.5 installed; there were several problems. 1. Screen brightness was way too BRIGH

  • Streaming Problem on N70

    I have a Nokia N70 that doesn't handle video steaming well. When, for example, you click "watch video" on YouTube Mobile, the RealPlayer does kick in, even connects, but after some time says "Unable to connect to server. Server timed out." I am in Sr

  • Upgrading from a hdd to a ssd on my g570

    Hello, I was wondering if anyone knew what ssd I should upgrade to. Any help would be appreciated. And also if you have any suggestions on a new prosesor it would be appreciated.

  • Adding color to an object in a black and white photo

    Can someone please help? I just bought Aperture and I was wondering if it is possible to add color to an object in a black and white photo? or keep an object in color and turn the rest of the picture into black and white? Thanks