Unable to send mail to outside domain users

Hey Folks,
Does anyone has a clue why OCS won't relay email message outside the domain?
I successfully completed a single box OCS R2 install on Redhat AS 2.1 kernel 2.4.9-e5. Everything works fine except sending email outside of the domain.
Thanks in advance for the help.
Rene

I'm getting the following message once I click on "SEND" to e-mail to an existing yahoo e-mail.
Error : Your message has not been sent because of unknown recipient(s). Please correct the email addresses of your recipient(s) and re-send.
<username>@yahoo.com
I increased the trace level on the SMTP_OUT to 30 but still not getting explicit info on that behavior, except some Trace 21 and 22 with no clear meaning.
Thanks,
Rene

Similar Messages

Cant send mail to outside domain

HI,
I've developed a program to send a mail. The program works fine in development & quality systems. However in production system the program fails to send mail to any recipient which is in outside domain. The program sends mail to user which is in my company's domain. Can any one please help.
The program was working fine till last month , however it has stopped sending mails to outside domain now.
Bye

Hi mac,
There is one setting in transaction SCOT (Basis people will be able to help you).
There we can specifiy the domains. Generally it is *. But it can be restricted. This may be causing the issue.
Regards,
Amit Mittal.

Mailx unable to send mails to outside world?

hi
on a solaris sparc 9 environment mailx command is unable to send mails to the outside world. What could be the reason & needs to be checked?
thanks

sounds basic, but what's your entry of malhost in /etc/hosts pointing to? If it's not there, add the entry with the IP address of your SMTP host.
when sending test mail from mailx, have another window open thats tail-ing the contents of /var/log/syslog - that usually contains good info about sendmail.
another thing worth checking is the rules on your SMTP gateway. If this is a new host, it may need adding to the list of authorised relay list. Also check to see if the SMTP host is alowed to relay mail outside of its own domain too.

Unable to send mails to other domains using sendmail in RHEL5

Hi,
we are unable to send the mails to other domain/gmail/hotmail except our own corporate domain .
Following is the error message ,
xdelay=00:00:00, mailer=relay, pri=120332, relay= ******.****.corp. [xx.xx.xx.xx], dsn=5.7.1, stat=User unknown
Kindly suggest.

Like I previously outlined there can be numerous reasons. The error message you are providing is absolutely useless. You will need to find out how your emails are being routed, i.e. sent to the outside directly or via another smtp gateway inside your network. Check your sendmail "smarthost" configuration, IP firewall and contact the mail administrator of your company if you use another mail gateway for relay. If you are allowed to send emails to the Internet cloud directly then you're server should be registered by a public MX DNS record. Google or Hotmail doesn't care what DNS you have configured locally. You don't add DNS entries into resolv.conf, only which servers to contact for you own DNS resolving. You may need to contact your Internet service provider or configure the DNS server that represents your DNS authority and address space to the worldwide Internet.

Notification mailer is not able to send mails to Outside domain i.e gmail

Hi All,
We are in 12.1.3 EBS application with 11.1.0.7 DB on Aix 64 bit platform:
resently we configured notification mailer with out any issues
But the issue is notifications are delivered to with in the domain itself but not to outside the domain i.e gmail and yahoo
SMTP server host name is owa.craftsmanautomation.com the same we used to configure the Notification mailer
Even we verified from os level using telnet utility as follows:
$ telnet owa.craftsmanautomation.com 25
Trying...
Connected to 192.168.5.8.
Escape character is '^]'.
220 Capl-cas01.CRAFTSMAN.LOCAL Microsoft ESMTP MAIL Service ready at Thu, 12 Jul 2012 14:03:47 +0530
EHLO CAPL-PROD
250-Capl-cas01.CRAFTSMAN.LOCAL Hello [192.168.5.12]
250-SIZE
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-STARTTLS
250-X-ANONYMOUSTLS
250-AUTH NTLM
250-X-EXPS GSSAPI NTLM
250-8BITMIME
250-BINARYMIME
250-CHUNKING
250-XEXCH50
250-XRDST
250 XSHADOW
MAIL FROM: [email protected]
250 2.1.0 Sender OK
RCPT TO: [email protected]
250 2.1.5 Recipient OK
DATA
354 Start mail input; end with <CRLF>.<CRLF>
Subject: Test message
Test message body
250 2.6.0 <[email protected]> [InternalId=85753] Queued mail for delivery
quit
221 2.0.0 Service closing transmission channel
Connection closed.
In the above command in place of FROM and TO mail-id's if we use any personal mail-id's getting error message as "Unable to Relay".Please suggest is there any changes we need to done at SMTP server Level or OS level or Application Level.
Thanks in Advance

925263 wrote:
Hi Hussein,
Thanks Alot for your reply.
Currently we changed the SMTP Server(mail.craftsmanautomation.com).we used anoth SMTP server to configure Notification Mailer.Because previous one(owa.craftsmanautomation.com) is not able to send mail's to outside domains.
But in this case we got the below error message while testing.Below error message we captured from the output file of the script Oracle Workflow ATG Support: R12 Java Mailer Setup Diagnostic Test.
ERROR
[Nov 10, 2012 1:32:45 PM GMT+05:30]:1352534565017:-1:-1:capl-prod.craftsmanautomation.com:192.168.5.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[outboundThreadGroup1,5,outboundThreadGroup]:192.168.5.13:84096:1352529863628:11:ERROR:[SVC-GSM-WFMLRSVC-110812-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProcessor.send(Message)]:Problem encountered when sending to {[[WFTEST <[email protected]>]]} -> javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
class javax.mail.SendFailedException: 554 5.7.1 <[email protected]>: Sender address rejected: Access denied
Please see these docs.
Email Not Received javax.mail.SendFailedException: Invalid Addresses [ID 876835.1]
Workflow Notification Mailer Unable to Send E-Mail Notifications [ID 374804.1]
Unable to Email Proposal Documents to an 'External Address' [ID 1126223.1]
How to address Email Center: Outbox Processor Error: Invalid Addresses [ID 1399427.1]
Thanks,
Hussein

Problem in sending email to other domain users

Hi All,
I am using javamail for sending emails and able to send to people within my exchange server domain. The problem is i am unable to send mail to other domain users like yahoo.com, hotmail.com..the error it is throwing out is *"Invalid Address"*
Is there any spaecial API for this to work?
Thanks,
Kishore

More details, please.
Please read the JavaMail FAQ. Post the protocol trace if you can't figure it
out yourself.

Unable send mails to outside world thru centeral mail host

I have installed IMS 5.1 on solaris 8 . I could able to send mails internal users (in the same server) I could able to receive external mails. But I am unable to send mails to outside world. I have to send mails to corporate mails server. Pls can u help me out . My server Ip is 191.254.4.10 and 191.254.1.28 is corporate mail server.

What error message or messages are you getting when you try to send?
I suspect you need to do things. First change your INTERNAL_IP mapping to allow those IP or networks that you wish to be able to relay through your host. Second you need to use a smart host, i.e. the mail hub you talk about. To do that look at putting the daemon channel keyword on the tcp_local channel.

Can not receive mail from outside domains

We are setting up our OCS 10g mail server, and are having trouble setting up our policies.
-unsure how to allow mail to come in from outside domains
-are able to send mail to outside domains if that one is set. is there a way to allow to send to any outside domain without having to set every single one?

it looks like the MX records are setup correctly now, but I am still unable to receive mail from outside domains.
from a gmail address i get the error:
Delivery to the following recipient failed permanently:
[email protected]
Technical details of permanent failure:
TEMP_FAILURE: Could not initiate SMTP conversation with any hosts:
[mydomain.com. (10): Connection timed out]
----- Original message -----
Received: by 10.70.123.6 with SMTP id v6mr2951750wxc;
Thu, 29 Jun 2006 05:22:06 -0700 (PDT)
Received: by 10.70.105.2 with HTTP; Thu, 29 Jun 2006 05:22:06 -0700 (PDT)
Message-ID: <[email protected]>
Date: Thu, 29 Jun 2006 09:22:06 -0300
From: "Chris M" <[email protected]>
To: [email protected]
Subject: test thursday 1
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="----=_Part_77974_24025125.1151583726769"
------=_Part_77974_24025125.1151583726769
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
test
------=_Part_77974_24025125.1151583726769
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
----- Message truncated -----
** i modified the email addressed for the post, actual email addresses were used **

Unable to send mails from Azure SharePoint 2010 VM

Hello All,
I have created Site-to-Site VPN in azure to my on premise, and i have configured SharePoint 2010 environment in that. Then i have configured outgoing mail settings for a web application in that VM, but i am unable to send mails to external domain from it.
But i am able to send mails from my on premise VMs to external domains.
Thanks

Hey There,
Azure does not support smtp relay, you may want to use SendGrid (which working with Microsoft Azure).
After registration you get 400 E-mail per day free of charge.
From technical aspects youll get SMTP server, Username & Password which you can fill in your application.
Hope it helps.
Ido

Some Users on randomly basis unable to send mails from 2003 exchange to 2007 Exchange users Internally.

Hi All,
Some Users on randomly basis are unable to send e-mails from 2003 exchange to 2007 Exchange users Internally.
They are sending mails from outlook and users from 2007 dont have any issues.
But sometime mails from 2003 to 2007 goes without any issue.
The NDR reported is as below.
From: System Administrator
Sent: 22 February 2014 15:59
To: XYZ
Subject: Undeliverable: Regarding Test Message
Your message did not reach some or all of the intended recipients.
Subject: Regarding Test Message
Sent: 22/02/2014 15:59
The following recipient(s) could not be reached:
XXX,XYZ on 22/02/2014 15:59
The message contains a content type that is not supported
<HubServer.Domain.UK #5.6.0 smtp;554 5.6.0 STOREDRV.Deliver.Exception:PropertyValidationException; Failed to process message due to a permanent exception>

Hi,
According to the NDR, I found this point "The message contains a content type that is not supported".
Please verify whether the un-delivered messages contain some Sensitive
Information, signatures or attachments that cannot pass the Exchange 2007 Edge server. Please also check the content type of the un-delivered messages.
Found a useful KB for your reference:
Frequently asked questions about MIME and content conversion in Exchange 2000 Server and in Exchange Server 2003
http://support.microsoft.com/kb/836555/en-us
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Unable to send mails to outlook from sap system through workflow

Hi ,
Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
Please find the errors belows that traced from sost t code
02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
Regards
RAGHAVENADAR

Hello,
Actually i checked the mail ID for WF-BATCH using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
ABAPer is sending mails through work flow.
Regards
RAGHAVENDAR M

Unable to send Mail from POP account

I have an Iphone 4 and have upgraded the IOS from 5-1 to 6.1.3. Since then I have been receiving all my mails but i have been unable to send mails from my POP account. the notification "Cannot Send Mail. A copy has been placed in your Outbox. The receipient, "xxyyzz @ gmail . com " was rejected by the server" displayed. Please Help. the same thing happens when I configure my POP account on my Son's Iphone4, and there is no problem in receiving and sending mails from my Outlook. Please Help!!!!!
Can i revert back to IOS5.1.1?????

Contact your email provider and get the correct settings to use for the outgoing mail server (SMTP) on a mobile device. If it's email provided by your ISP, they have likely blocked email from outside their network from relaying to prevent spam.

Unable to SEND mail using Activesync in Exchange 2010 server on iPhone or Windows Mobile 6.1

Hi All,
We've been setting up a new SBS 2011 server for a client this week. Everything is working, except the staff have 4 x iPhones to connect with Exchange ActiveSync.
There are 2 x iPhone 4's and 2 x iPhone 3Gs's. We can setup the Exchange accounts on each of the phones and they are all able to sync mail and calender etc with the server.
The problem we have is when any of them try to send mail from the phone, it gives an error : "Cannot Send Mail - An error occurred while delivering this message" and it sits in the outbox on the phone.
The newsgroups and forums are littered with people having issues with IOS4 and Exchange 2010 but most of these are from June-August 2010 when IOS4 version was around 4.00 or 4.01
A lot of these people had iPhone 3 handsets running with IOS 3.1.3 which worked with Exchange 2010 but when they upgraded to IOS 4, they had this problem sending mail.
It seems that for most of them, the fix came in the form of IOS version 4.1 which fixed the send issue for them.
We have a variety of Hansets and IOS versions (including an iPhone 3Gs running IOS 3.1.3) but are unable to send mail from any of them:
iPhone 3Gs    IOS 3.1.3
iPhone 3Gs    IOS 4.3.3
iPhone 4       IOS 4.3.3
iPhone 4       IOS 4.3.5
I was surprised that the iPhone 3Gs running 3.1.3 was unable to send either as nearly all the forums etc I read with this issue said the iPhone 3's worked with that IOS version.
Today we used a test iPhone 4 handset from our office to connect to an almost identical Small Business Server 2011 we setup two weeks ago for another client.
The test iPhone 4 was able to connect, Sync and Send email on that server but when set it to connect to this SBS 2011 server, it gets the "Cannot Send Mail" message the same as the others. So clearly the handset is working (on the other server at least),
it must be something misconfigured in this Exchange server right?
We ran the Exchange Remote Connectivity Analyser on the Exchange server and got green ticks across the board.
Outlook Web App and Outlook Anywhere both work normally. Everything we can test on the Exchange server works except sending from any iPhone.
Having said all that, I just setup a Windows Mobile 6.1 handset to sync with the Exchange 2010 server as a test, and it appears to have the same issue.
It will connect & Sync Mail, Contacts and Calendar but if trying to send an email from the phone, it will just sit in the outbox.
Does anyone have some insight into what the problem may be?

Further to this .. I found the solution on a MS Exchange 2010 support forum.
It was not a certificate or firewall issue, looks as thought the “Accepted Domains” in Exchange Mgmt Console –
Org Config – Hub Transport cannot have any spaces in the name field.
I had some spaces and the emails were not downloading fully and able to send. Once I removed the spaces from the Name field and
restarting the Exchange and IIS services emails were now being sent and received ok.
Check
out :
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmobility/thread/321eae51-9cbd-4a5e-85c1-68d8f7b523c3
This
is good one to add to your knowledge bank in case you come across it in the future.
Rgds Gerry

Outlook does not send mail to extern domains

It says that "[550] 5.7.1 Rcpt command failed: Mail denied due to site's policy".
Web Access Client at the same time send mail to outside without any problems.
Outlook connector and Collaboration Suite ver. - 10.1.2.
Where is problem?

you should change the next value in smtp inbound
Enable Routing Control : active
allow message relay : true
allow message relay domain : *
flag process: -l
Recipient Rewriting Rules: $*@your host target smtp,$1@your domain target smtp,
example:
$*@mail.sinux.com.pe,$[email protected],
you should change the next value in smtp outbound
rele smtp : ip of your source mail or relay :port smtp
flag process: -l
Atte.
Yuri Garcia S.

[nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authentic

Hi,
We have configured SMTP server details in OBIEE 11g OEM to send mail from Agent. When we run Agents, we are getting the error
[nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authenticated
Did anyone face the issue? In that Case, Please give some inputs on that.

Hi Satya,
I would like to few more which I have done today.
I wanted to test telnet SMTP on the OBIEE Installed Machine and I was able to succeed also. Please find below what I did
C:\>telnet mail.smtp.com 25
220 internal.mail.smtp.com Microsoft ESMTP MAIL Service Readt at Fri,
25 May 2012 00:51:00 -0400
ehlo
250-internal.mail.smtp.com Hello [162.44.76.47]
250-SIZE
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-X-ANONYMOUSTLS
250-AUTH NTLM LOGIN
250-X-EXPS GSSAPI NILM
250-8BITMIME
250-BINARYMIME
250-CHUNKING
250-XEXCH50
250 XRDST
AUTH LOGIN
334 VXN1cm5hbWU6
Uy5SY-------------- Mail User Name
334 UGFzc3dvcmWU6
U2hfpd------------- Mail Password
235 2.7.0 Authentication Successful
mail from:[email protected]
250 2.1.0 Sender OK
rcpt to:[email protected]
250 2.1.5 Recipient OK
data
354 start mail input; end with <CRLF>.<CRLF>
This is a Test Mail
250 2.6.0 <internal.mail.smtp.com>
Queue Mail for Delivery
Mail Received in Inbox
So, My Question is that, I am able to receive the Mail if I directly access SMTP via Telnet then , Why it is not working in OBIEE and it throws error
[nQSError:75006] Failed to send MAIL Command.5.7.1 Client was not authenticated
Please help on resolving the issue?

Unable to send mail to outside domain users

Similar Messages

Maybe you are looking for