Unable to SEND mail using Activesync in Exchange 2010 server on iPhone or Windows Mobile 6.1

Hi All,
We've been setting up a new SBS 2011 server for a client this week. Everything is working, except the staff have 4 x iPhones to connect with Exchange ActiveSync.
There are 2 x iPhone 4's and 2 x iPhone 3Gs's. We can setup the Exchange accounts on each of the phones and they are all able to sync mail and calender etc with the server.
The problem we have is when any of them try to send mail from the phone, it gives an error : "Cannot Send Mail - An error occurred while delivering this message" and it sits in the outbox on the phone.
The newsgroups and forums are littered with people having issues with IOS4 and Exchange 2010 but most of these are from June-August 2010 when IOS4 version was around 4.00 or 4.01
A lot of these people had iPhone 3 handsets running with IOS 3.1.3 which worked with Exchange 2010 but when they upgraded to IOS 4, they had this problem sending mail.
It seems that for most of them, the fix came in the form of IOS version 4.1 which fixed the send issue for them.
We have a variety of Hansets and IOS versions (including an iPhone 3Gs running IOS 3.1.3) but are unable to send mail from any of them:
iPhone 3Gs    IOS 3.1.3
iPhone 3Gs    IOS 4.3.3
iPhone 4       IOS 4.3.3
iPhone 4       IOS 4.3.5
I was surprised that the iPhone 3Gs running 3.1.3 was unable to send either as nearly all the forums etc I read with this issue said the iPhone 3's worked with that IOS version.
Today we used a test iPhone 4 handset from our office to connect to an almost identical Small Business Server 2011 we setup two weeks ago for another client.
The test iPhone 4 was able to connect, Sync and Send email on that server but when set it to connect to this SBS 2011 server, it gets the "Cannot Send Mail" message the same as the others. So clearly the handset is working (on the other server at least),
it must be something misconfigured in this Exchange server right?
We ran the Exchange Remote Connectivity Analyser on the Exchange server and got green ticks across the board.
Outlook Web App and Outlook Anywhere both work normally. Everything we can test on the Exchange server works except sending from any iPhone.
Having said all that, I just setup a Windows Mobile 6.1 handset to sync with the Exchange 2010 server as a test, and it appears to have the same issue.
It will connect & Sync Mail, Contacts and Calendar but if trying to send an email from the phone, it will just sit in the outbox.
Does anyone have some insight into what the problem may be?

Further to this .. I found the solution on a MS Exchange 2010 support forum.
It was not a certificate or firewall issue, looks as thought the “Accepted Domains” in Exchange Mgmt Console –
Org Config – Hub Transport cannot have any spaces in the name field.
I had some spaces and the emails were not downloading fully and able to send. Once I removed the spaces from the Name field and
restarting the Exchange and IIS services emails were now being sent and received ok.
Check
out :
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmobility/thread/321eae51-9cbd-4a5e-85c1-68d8f7b523c3
This
is good one to add to your knowledge bank in case you come across it in the future.
Rgds Gerry

Similar Messages

"Unable to send mail" using Verizon email account

No matter what I try, my Incredible will not send an email using my Verizon email account. I receive emails but cannot send. I've verified the account settings numerous times and the verifications always work. But I still get the "Unable to send mail" message. Initially I thought it was the port but I've tried both 25 and 587. Neither work. I know I've sent messages before but it's been a while. Anyone have any ideas?

I tried SSL with 25 and 587 (Verizon recommendation). Still no go.
BTW, there isn't any way to save the Mail size limit and Download options is there. Every time I go thru this I have to go back and set these up again.
Thanks again for your help.

Unable to send mail using javamail through gmail

can anyone plz help me by sending the code to [email protected] send mail through gmail server as i always get exception of authentication failed even when i supply correct userid & password

Include the following when setting your mail properties:
props.put("mail.smtp.auth", "true");

How much CPU should the Agent (in general) be using on an Exchange 2010 Server

Hello
Can someone please help me with the following question.
I was asked by the Exchange admin if the HealthService.exe process should be using around 10% of the CPU on a 6 core system.
First of I am note sure if the agent can use more than one core and if the % CPU as shown in Task Manager reflects all cores for a given process e.g. does 10% mean 10% across all cores or just one core.
I explained the Agent is running many workflows and instigating other tasks i.e. monitoring host and perhaps cscript etc. So it is difficult to say how much CPU is normal!
However does anyone else have an Exchange 2010 environment (I am using SCOM 2007 R2 CU6) and if so how much CPU is it using over a few minutes?
also, if there a canned report I can run which shows how much CPU the agent is using over time.
Thanks in advance
AAnotherUser__
AAnotherUser__

There are many scripts and monitoring workflows in general that run in the Exchange management pack. CPU may spike periodically while scripts are executing. However, this may be a SyncTime issue in the Exchange pack - since there are many scripts in the
pack, it would be recommended to cascade script runtime by using SyncTime configuration. I haven't taken a look at this pack in some time, so cannot comment on whether this practice was used. In general, a typical SCOM agent should not use more than 1-5% CPU
time, sustained. But, again, for heavily scripted packs like the Exchange pack, you will likely see CPU spikes regularly.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Delivery Receipt After Sending Mail Using JavaMail ?

Hi Friends,
I have written an application using JavaMail which would be used to send mail
using my organisation's SMTP Server.I would like to include the following functionality in it.Just as
Microsoft's Outlook has an option to get Delivery Receipt of the mail and Read Receipt of the mail sent
(Provided the email Client supports it) i would like to have a similar option in my application to.I would like to of how i can do it using JavaMail.I heard that basically we need to set some SMTP properties which the Mail Transfer Agent would recognize and send us the Delivery and Read Receipts.But,i am not sure of what those properties.Can anyone help me regarding this ?

You might look into creating a custom header that provides a return reciept to the email address you specify. I'm not 100% sure that all mail servers support this but you might want to look into it as a solution.
-Dave

I am unable to send emails using mail from my btinternet and yahoo accounts similar problem to others with mobile me accounts on lion any suggestions?

I am unable to send emails using mail from my btinternet and yahoo accounts similar problem to others with mobile me accounts on lion any suggestions?

Do I need to delete all my email accounts and start again?

Unable to send Mail from POP account

I have an Iphone 4 and have upgraded the IOS from 5-1 to 6.1.3. Since then I have been receiving all my mails but i have been unable to send mails from my POP account. the notification "Cannot Send Mail. A copy has been placed in your Outbox. The receipient, "xxyyzz @ gmail . com " was rejected by the server" displayed. Please Help. the same thing happens when I configure my POP account on my Son's Iphone4, and there is no problem in receiving and sending mails from my Outlook. Please Help!!!!!
Can i revert back to IOS5.1.1?????

Contact your email provider and get the correct settings to use for the outgoing mail server (SMTP) on a mobile device. If it's email provided by your ISP, they have likely blocked email from outside their network from relaying to prevent spam.

Unable to send mail- mail remains in outbox and I receive error message

Ok, I have used Mail for years. All of a sudden I am unable to send mail. The mail goes to the outbox and then I receive the following error message.
This message could not be delivered and will remain in your Outbox until it can be delivered.
The server "smtp.mac.com" refused to allow a connection on port 25.
I can connect to webmail of course and send mail that way.
I receive mail perfectly.
Not sure what to do...??
Thank you for any help with this.

Read the following article, which applies to all versions of Mac OS X (not just Mac OS X 10.4.2 and earlier as the article states) and can be useful for other mail accounts as well (not just .Mac):
.Mac: Server timeout alert message when sending email

TS3276 Anyone experiencing problems sending mail using TalkTalk - can receive but not send - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

Anyone experiencing problems sending mail using Apple Mail viaTalkTalk - can receive but not send - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

jag157 wrote:
"I managed to solve the problem. Under smtp settings (mail preferences/accounts/edit smtp) I set the outgoing port to 25 (as recommended by Talktalk), no authentication (set to none) and unchecked SSL. I found that until I set the port to 25 and authentication to none I was unable to uncheck SSL. One I had done this I was able to send from my main email and other email adddresses set up under my account."
Superb advice R&W! My email sending block using TalkTalk started 2 months ago using Snow Leopard, continued when I upgraded to 10.8.2, and has been persistent on my wife's new iPad (IOS 6.1). Implementing your wise words has fixed all that, and now enables me to call her on FaceTime — previously only she could call me. Thank you so much; this will save hours of further fruitless searching and phoning.
Please remember that your email is now insecure, if you wish to have a secure connection SSL must be on and port 25 should be avoided.

Adobe acrobat error - unable to send mail

I`m using Win 7 pro 64bit with acrobat 9.0 pro 32 bit.
I am now unable to send .PDF`s from either the toolbar or from the File, attach mail.
The system says Ädobe acrobat error - unable to send mail"
Any hep would be appreciated.
Many thanks

I don't remember much of Acrobat 9...
What email client are you using? Are the Acrobat preferences configured to use that email client? Is it running when you try to send that document?
[topic moved to Acrobat forum]

Unable to send mails to outlook from sap system through workflow

Hi ,
Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
Please find the errors belows that traced from sost t code
02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
Regards
RAGHAVENADAR

Hello,
Actually i checked the mail ID for WF-BATCH using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
ABAPer is sending mails through work flow.
Regards
RAGHAVENDAR M

Can we send mails using Oracle

Hi Everybody,
Can we send mails using Oracle (like java mail)?? Can I a write a procedure/stored procedure to send a mail if there is any change in the database tables
null

There are three Exchange portlets available for use with Portal 3.0.8.9.8 (inbox, calendar, contacts). They will be downloadable from the new Oracle9iAS Portal Partner Catalog which will be up at the end of March. If you wish to use these portlets before then, send me an email request and I will give them to you.

Unable to send mails from Azure SharePoint 2010 VM

Hello All,
I have created Site-to-Site VPN in azure to my on premise, and i have configured SharePoint 2010 environment in that. Then i have configured outgoing mail settings for a web application in that VM, but i am unable to send mails to external domain from it.
But i am able to send mails from my on premise VMs to external domains.
Thanks

Hey There,
Azure does not support smtp relay, you may want to use SendGrid (which working with Microsoft Azure).
After registration you get 400 E-mail per day free of charge.
From technical aspects youll get SMTP server, Username & Password which you can fill in your application.
Hope it helps.
Ido

HT1277 i can receive mail but unable to send mail

i can receive mail but unable to send mail

I'm yet another person who upgraded to Maverick OSX. I'm now thinking, "BIG mistake". Mail was working perfectly. Then, last night, Mail stopped sending.
I've checked everything. Comcast servers are set up correctly. Mail works fine on my ipad, but will not send. It gives me a SMPT error of "Cannot send message using the server comcast.net--authentication rejected" Comcast.net (Offline). I can not get it back online. I've also tried the fixes here, but there is no info.plist by those names in my library!
Anyone have any other ideas how to get this working again? Apple's OS's have been pretty decently stable in the past. I had no thought that the upgrade would be so problematic. Live and Learn.
Thanks for any suggestions.
-Rachel

Problems to SEND MAIL using WWV_FLOW_MAIL.SEND - APEX_MAIL

I tried send mail using the code below
DECLARE
l_body      CLOB:= EMPTY_CLOB;
l_body_html CLOB:= EMPTY_CLOB;
BEGIN
wwv_flow_api.set_security_group_id;
l_body :='<html>
+<head>+
+<style type="text/css">+
+body{font-family: Arial, Helvetica, sans-serif;+
                               +font-size:10pt;+
                               +margin:30px;+
                               +background-color:#ffffff;}+
+span.sig{font-style:italic;+
font-weight:bold;
color:#811919;}
+</style>+
+</head>+
+<body>+
+</html>';+
l_body_html := '<html>
+<head>+
+<style type="text/css">+
+body{font-family: Arial, Helvetica, sans-serif;+
                               +font-size:10pt;+
                               +margin:30px;+
                               +background-color:#ffffff;}+
+span.sig{font-style:italic;+
font-weight:bold;
color:#811919;}
+</style>+
+</head>+
+<body>+
+</html>';+
wwv_flow_mail.send('[email protected]','[email protected]',nvl(l_body,'Texto com erro'),nvl(l_body_html,'erro2'),'K','[email protected]',
+'[email protected]','[email protected]');+
wwv_flow_mail.push_queue;
END;
+/+
This code return the message:
Mail To From Subject CC BCC Created On Created By Error Created
CHECK$01 [email protected] [email protected] K [email protected] [email protected] 08/23/2010 03:05:00 PM SYS
ORA-06502: PL/SQL: erro: erro de conversão de caractere em número numérico ou de valor
Follow my mail settings
SMTP Host Address : POP.SLE.TERRA.COM.BR
SMTP Host Port 110
Administration Email Address [email protected]
Notification Email Address [email protected]
what´s wrong ?

I would try sending just basic text first, then move on to getting your other pieces dynamics. The very last step to me would be the email body.
Here is an example of a basic text email I use:
declare
e_id        NUMBER;
c_id        NUMBER;
emp_nm      VARCHAR2(100);
clrk_id     NUMBER;
e_clrk      VARCHAR2(47);
e_org       NUMBER;
e_sender    VARCHAR2(50);
e_recip_lst VARCHAR2(255);
e_cc        VARCHAR2(100);
e_bcc       VARCHAR2(100);
e_subj      VARCHAR2(50);
e_msg_ln1   VARCHAR2(100);
e_msg_ln2   VARCHAR2(100);
e_msg_ln3   VARCHAR2(100);
e_msg_ln4   VARCHAR2(100);
e_msg_ln5   VARCHAR2(100);
e_msg       VARCHAR2(1000);
CRLF        CHAR(2) := CHR(13) || CHR(11);
tmp_flag    NUMBER;
begin
   if :P2_INJURY_FLAG = 1 then
   -- find out if it has changed first so we don't keep sending emails
    select injury_flag, VEH_LOC
      into tmp_flag, e_org
      from APPS.tc
     where tc_id = :P2_TC_ID;
   if :P2_injury_flag <> tmp_flag then
    begin
       select FN_GET_USER(nvl(v('APP_USER'),user))
         into clrk_id
         from dual;
      select ADMIN_USERNAME
         into e_clrk
        from APPS.APEX_ACCESS_CONTROL
       where ID = clrk_id;
    exception
       when others then null; -- in case we cannot find the user
    end;
    e_id          := :P2_EMP_ID;
    c_id          := :P2_TC_ID;
    select EMP_FNAME ||' '|| EMP_MNAME ||' '|| EMP_LNAME into emp_nm
      from APPS.EMPLOYEES
     where EMP_ID = e_id; --
    select RECIPIENTS, CC, BCC
      into e_recip_lst, e_cc, e_bcc
      from APPS.SAFETY_NOTIFICATIONS
     where ORG_ID = e_org; --
      e_sender    := '[email protected]';
      e_subj      := 'Loss Reported';
      e_msg_ln1   := 'Employee: ' || emp_nm || ' (' || e_id || ')'
                      || CRLF;
      e_msg_ln2   := 'Was reported as sustaining a loss' || CRLF;
      e_msg_ln3   := 'by ' || e_clrk ||CRLF;
      e_msg_ln4   := CRLF;
      e_msg_ln5   := 'Sent ' || to_char(sysdate,'MONTH DD,YYYY HH:MI AM');
      e_msg       := e_msg_ln1 || e_msg_ln2 || e_msg_ln3 || e_msg_ln4 || e_msg_ln5 || CRLF || e_recip_lst;
     utl_mail.send(
       sender => e_sender,
       recipients => e_recip_lst,
       cc => e_cc,
       bcc => e_bcc,
       subject => e_subj,
       message => e_msg);
end if;
end if;
end;

Unable to SEND mail using Activesync in Exchange 2010 server on iPhone or Windows Mobile 6.1

Similar Messages

Maybe you are looking for