Unable to send mail via .Mac

Love my new iPhone. Everything seems to work just fine. I can't, however, send mail using my .Mac account (I receive mail just fine). When I attempt to send (using Edge), I get an error, "Cannot send Mail - the connection to the outgoing server 'smtp.mac.com' failed." One would guess that I've got some setting incorrect, but I can't see what it is. My Yahoo and GMail accounts seem to work just fine, both sending and receiving mail. It's just the .Mac account. Any suggestions? I suppose I could delete the account and try again, but there must be something not right. Any Ideas???
DukeM

Did you manually create your .Mac account on the iPhone or transfer your .Mac account settings from your Mac to the iPhone via the sync process?
If the latter, what are you using for the server port for .Mac's SMTP server on your Mac?
If not 25, change it to 587.
If you manually created your .Mac account on the iPhone, use this for the SMTP server.
smtp.mac.com:587
Add 587 to the SMTP server separated by a colon.
I use this to send with my .Mac account on different WiFi networks and via EDGE with no problems.

Similar Messages

Unable to send mail via Secure SMTP

Our email system allows users access to their accounts via secure IMAP and SMTP.
I am able to connect and view my inbox via secure IMAP, using a number of different S60 devices - namely E72, E52 and 5800.
However I am unable to connect to send via secure SMTP.
By contrast, I am able to view and send mail with Apple and Android devices without any problems.
On my comparable UAT configuration the S60 devices do not have this problem.
On UAT, we use a self-signed certificate, as opposed to the Live system which uses a Verisign certificate.
Help, please!
I'd like to be able to send mail with my S60 devices.
How can I resolve this apparent problem with the certificate?
Echo

An Update of sorts.
On my E72 I removed all references to Verisign under: Ctrl. panel -> Settings -> General -> Security -> Certificate management -> Authority certificates. (There were about 6 entries)
I tried to connect afresh, but the phone took two attempts to pick up my password for email.
I now have a 'Trusted site certificate' for the email server.
However, I still can't send. A message pops up 'Unable to send message: <target address>'

TS3276 unable to send mail via charter. Have desk and lap top.

Have Charter as ISP. Have Apple desktop and Mac Book Pro and iPhone. Can receive messages on all devices but can only send on desk top (primary household computer) and iPhone. Have checked Apple site and have gotten no resolutuion by talking to Charter support. Can anyone help?

An Update of sorts.
On my E72 I removed all references to Verisign under: Ctrl. panel -> Settings -> General -> Security -> Certificate management -> Authority certificates. (There were about 6 entries)
I tried to connect afresh, but the phone took two attempts to pick up my password for email.
I now have a 'Trusted site certificate' for the email server.
However, I still can't send. A message pops up 'Unable to send message: <target address>'

Can't sending email via mac mail from home

I have had BT broadband for a year now and recently I have had issues sending mail from mac mail on my business email. It comes back with an error saying to check that email is addressed properly and check smtp settings with admin.
This problem has only just started.
I searched the forum and found a sugestion to verify email in yahoo mail, whch I have done but still no joy.
Any suggestions?
Regards
Steve

cognitioncoach wrote:
I have had BT broadband for a year now and recently I have had issues sending mail from mac mail on my business email. It comes back with an error saying to check that email is addressed properly and check smtp settings with admin.
This problem has only just started.
I searched the forum and found a sugestion to verify email in yahoo mail, whch I have done but still no joy.
Any suggestions?
Regards
Steve
Spent two hours on the phone today with BT. They escaleted the problem to a specialist support desk, which we then had to agree to paying a £30 charge if they were able to fix the problem as they say that it is a problem with mac mail. (Which it isn't because it works fine using a different broadband connection, and we have three laptops in the house all with same problem, using outlook as well as mail).
All three laptops have been working with out fault for the last four years and just before christmas they all stopped being able to send emails using hotmail. Obviously BT have changed something somewhere along the line.
The Specialist just changed our outgoing mail server to use BTs instead. (I have been using a different SMTP server anyway as a temporary fix since christmas) Whilst we are able to send emails, we are still unable to connect to hotmails SMTP server. Still had to pay the £30 though. As far as they are concerned that still counts as a fix. Another "solution" they gave me was to change the DNS address in system preferences- Not Ideal as everytime you connect your laptop to a new network you will have to reset them.An absolute joke.
Their direct number is 08000 321 118 if you need them to talk you through it. Best to have your bank card to hand.
Livid.

HT6114 Why would i lose the ability to send mail via my mac? smtp is offline

Why would i lose the ability to send mail via my mac? smtp is offline and cannot get it to respond. I have web mail with o2, which is working fine, and i can send and receive on my iPhone!! yet i cannot send on any of the four accounts i have via mac?

Troubleshooting sending and receiving email messages
Troubleshooting sending email messages

I am unable to send mail from my Orange.fr account on my ipad add

Orange.fr lost personal data on Sunday, so I decided to change the password on my mail account which I did successfully can pick up and send mail via Thunderbird on my PC. However, I had to delete my orange account from the mail application as it would let me change the password in settings. I can now receive mail OK, but I an unable to send as I get the message that "That the username or password for "SMPT (email address)@smtp.orange.fr" is incorrect. I have checked the server settings against those on Orange.fr website, and they are correct. Any ideas what the problem is?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Unable to send mail- mail remains in outbox and I receive error message

Ok, I have used Mail for years. All of a sudden I am unable to send mail. The mail goes to the outbox and then I receive the following error message.
This message could not be delivered and will remain in your Outbox until it can be delivered.
The server "smtp.mac.com" refused to allow a connection on port 25.
I can connect to webmail of course and send mail that way.
I receive mail perfectly.
Not sure what to do...??
Thank you for any help with this.

Read the following article, which applies to all versions of Mac OS X (not just Mac OS X 10.4.2 and earlier as the article states) and can be useful for other mail accounts as well (not just .Mac):
.Mac: Server timeout alert message when sending email

[nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authentic

Hi,
We have configured SMTP server details in OBIEE 11g OEM to send mail from Agent. When we run Agents, we are getting the error
[nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authenticated
Did anyone face the issue? In that Case, Please give some inputs on that.

Hi Satya,
I would like to few more which I have done today.
I wanted to test telnet SMTP on the OBIEE Installed Machine and I was able to succeed also. Please find below what I did
C:\>telnet mail.smtp.com 25
220 internal.mail.smtp.com Microsoft ESMTP MAIL Service Readt at Fri,
25 May 2012 00:51:00 -0400
ehlo
250-internal.mail.smtp.com Hello [162.44.76.47]
250-SIZE
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-X-ANONYMOUSTLS
250-AUTH NTLM LOGIN
250-X-EXPS GSSAPI NILM
250-8BITMIME
250-BINARYMIME
250-CHUNKING
250-XEXCH50
250 XRDST
AUTH LOGIN
334 VXN1cm5hbWU6
Uy5SY-------------- Mail User Name
334 UGFzc3dvcmWU6
U2hfpd------------- Mail Password
235 2.7.0 Authentication Successful
mail from:[email protected]
250 2.1.0 Sender OK
rcpt to:[email protected]
250 2.1.5 Recipient OK
data
354 start mail input; end with <CRLF>.<CRLF>
This is a Test Mail
250 2.6.0 <internal.mail.smtp.com>
Queue Mail for Delivery
Mail Received in Inbox
So, My Question is that, I am able to receive the Mail if I directly access SMTP via Telnet then , Why it is not working in OBIEE and it throws error
[nQSError:75006] Failed to send MAIL Command.5.7.1 Client was not authenticated
Please help on resolving the issue?

Cant Send Mail via DSL

Im Apple Mail using iMac G4 and G4 tower. Both will recieve an send mail find via dial-up but will not send mail via dsl connection.
We get our mail via ethernet > router > antenna > atenna > another router > antenna > ten miles away at another antenna then to dsl source.
So our dsl connection/signal is going threw three other antennas and at least one router here in office before we get it.
My ISP provider says we need to talk to our DSl provider.
Any ideas? Our computer tech is out of office touch for a week.
Ran

Thanks but this doesn't answer my question.
Allan, I am 99% percent sure that my ISP is not the same ones who supply our ethernet/broadband/DSL.
Is your internet service provider (ISP) for your
dial-up connection different from the ISP for the DSL
connection?
Yes, I believe that they are differrent, however, I have new info.
At first my G4 tower with Earthlink account would not send out over etherner/broadband/DSl, but now it does! I, nor anyone else, has made any changes to the outgoing address that works for dial-up connection and is what we have always used until yesterday when we first tried the dsl/braoband
Kind of a different situation and not typical or the
norm to have a company that provides a DSL connection
not be the internet service provider for the
connection.
Someone new came into our building for office space. He had the router, ethernet cables and antenna installed. He/we get electro-magnetic radiational signal from a larger business across the street who has a tower --soon to be a taller tower-- and they get there radiational signal from 10 miles away.
Knowing who your ISP is for connecting to the
internet regardless if using a dial-up connection or
a DSL connection (DSL is considered a broadband) is
important and if the email account and SMTP server
being used is provided by the ISP being used for your
internet connection or by a different email account
provider not associated with the ISP used for
connecting to the internet.
Yes, I understand that is the case. Maybe I'm wrong and by some coincidence the DSL provider is Earthlink and that is why the G$ tower account began working for the outoging mail.
Im still having the sam problem on the G4 iMac which is a local.com account they have told us the same as you have, that we need to know who the DSL provider is and what info they require in the outgoing( smtp ) line.
You mentioned Earthlink which is an internet service
provider that offers dial-up access and/or DSL access
so does the Earthlink protocol you mentioned mean you
are having problems sending with an Earthlink email
account and SMTP server?
Earthlink account is working now so again perhaps the DSL provider is coming through Earthlink and ergo we didnt need to make changes to the outgoing( smtp ) info line.
Thats the only way that one can be explained.
I take it you use the dial-up connection at home
(which is provided by Earthlink?) and the DSL
connection is used at the office?
Thats correct. The inital DSl source for the business that is 10 miles away, must use Earthlink. I'm now presuming this is the case with this new info.
However, there is another --3rd-- business on other side of street and he uses --Apple mac just like me-- and his ISP is "host centric". I looked at his mac preference accounts outgoing ( smtp ) line and his is
"mail.the business name.com:his email address",
i.e. he does not use Earthlink but he has no problem sending out mail via the same DSl/broadband connections we have
The only reason he has his address in the outgoing mail liine is bceause he too is in larger business building with several differrent computers and email address's.
I've tried all kinds of combinations that are similar to the Earthlink outgoing and the hostcentric outgoing
but none work for the local.com account.
The exact error message provided when trying to send
messages is also pertinent information.
"message delivery failed" "the attempt to read data from the server 'server-name' failed"
Then it gives me option to try differrent server names.
Thanks for your efforts Allan and ohters.
Ran

Yahoo mail via mac- smtp server authentcation issues using Rogers ISP

Hi All,
I know there is tons of comments posted here that are quite redundant in respects to using yahoo mail via mac. I am in Toronto using Rogers as ISP and have set up my pop ok - incoming mail is ok. I try to send a test email and i am getting the message
Cannot send message using the server smtp.mail.yahoo.com
The server response was: authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
I hav tried all kinds of stuff here based on suggestions i have read in this forum.
incoming mail server- pop.mail.yahoo.com
outgoing mail server - smtp.mail.yahoo.com
server settings- port 587- have also tried 25
ssl not checked
authentication is not checked
i have tried smtp.rogers.broadband.com as an alternative also, but then it simply rejects my authentication password
I am really stuck here- if anyone out there in Toronto area using Rogers, has any feedback, i greatly welcome it.
Hope to hear from you.
Barry
macbook pro- Mac OS X (10.4.8)

No. not SSL.
Server authentication.
And i don't think you need to add a password there. You are already sending password from the POP settings - SMTP authentication picks up password from there.
This is from the help file at rogers.com (your ISP?)
http://help.yahoo.com/help/rogers/mail/pop/pop-15.html
Are you sure that using these settings don't work?
This is for Outlook Express for Mac, but your Mail settings should be close enough to find the appropriate boxes.
If your friend is on rogers yahoo, just duplicate her settings except in the address/password boxes.
Outlook Express allows you to add a new email account to your existing profile, so you do not have to replace your current settings in order to send and receive Rogers Yahoo! Mail messages. To set this up, follow these steps:
1. From the Tools menu, choose "Accounts."
2. Select the "Mail" tab.
3. Click the "Add" button.
4. From the Add menu, click "Mail."
5. In the Display Name text box, type your name, and then click "Next."
6. In the email address box, enter your full Rogers Yahoo! Mail address (e.g., [email protected] or [email protected]).
7. In the Incoming (POP3) box, type:
pop.broadband.rogers.com
8. In the Outgoing (SMTP) box, type:
smtp.broadband.rogers.com
9. Click "Next."
10. In the Account Name box, type your full Rogers Yahoo! Mail address (e.g., [email protected] or [email protected]).
11. In the Password box, type your Rogers Yahoo! Mail password.
12. If you want Outlook Express to remember your password, then check the box.
13. Do not check the "Log on using secure password... " box.
14. Click "Next."
15. Click "Finish."
To control deletion of messages from the Rogers Yahoo! Mail Server, follow these steps:
1. From the Tools menu, choose "Account."
2. Select the "Mail" tab.
3. Double-click on your Rogers Yahoo! Mail account.
4. Select the "Options" tab.
5. In the Server Options section at the bottom of the window, check "Leave a copy of each message on the server" if you want to save your Rogers Yahoo! Mail messages on both the Rogers Yahoo! Mail server and on your local computer. If you would prefer to have your messages deleted from the Rogers Yahoo! Mail server after you have received them in Outlook Express, do not check this box.
To change your default SMTP port settings:
1. On the Tools menu, click Accounts.
2. On the Mail tab, click your Internet Mail account, and then click Edit.
3. On the Account Settings tab, click Click here for advanced sending options, and then type 587 as the port number for your SMTP (or sending) mail.

Can't send mail via mail

Greetings O Wise Ones,
The smtp setting are correct. I can receive mail. The mail app was working fine one minute and the next I couldn't send mail. Tried a new smtp and it didn't work either, Created a new login user and new mail. The smtp work with the new user but not with the old one. Any ideas that don't delete the com.apple.mail.plist? If that's the only way. How do I save my mail boxes?

This is happening to my wife's Leopard 10.5.8 upgraded machine right now.
We've been using Apple Mail for years and it works, but suddenly stopped working
and refuses to send mail via any SMTP server at all. It just spins forever and eventually
complains it can't.
The account is configured to send via comcast (smtp.comcast.net), DSL (smtp.sbcglobal.yahoo.com), and gmail, as choices. Two of them require authentication, Comcast doesn't require authentication, only that the e-mail be sent via the Comcast cable router, which it is.
I've tried removing the SMTP accounts and carefully re-adding, removing the Gmail IMAP mail account itself in Apple Mail and re-adding, and even moving aside the /Users/<user/Library/Mail folder so it can be re-added. I've even used the sqlite3 index vacuum command.
On my own Mac Pro, 10.5.8, I'm able to send e-mail, but on the notebook mail is wedged up for good and it seems to be associated with the upgrade. I am now re-installing 10.5.8 from the 'combined' download, and I'll see if it fixes it. What a hassle.

Sending mail via Javascript.

It is possible to send mail via a Javascript. If so can anyone support me with the code to do so.

you use the Windro$$ scripting host, and use an ActiveXObject to access the Outlook (not express) poroperties.
I used to do them a lot because they save me time... all automated is always better.
For example, here is a script that changes the read-only, etyc file properties on a windro$$ box. (I used it when copying CDs)
/* Changes the file attributes in a batch of files starting in
* the current directory and progressing according to parameters
/* LOGIK:
    -get the path to a file in folder
        change attribute of file/dir.
        repeat until there are no more files
            go to next folder
            start again
*                     VARIABLE PARAMETERS                      *
* includeSubDirectories {true | false}                         *
*     Should the subdirectories' files be changed too?         *
* numberOfLevelsDeep {0 | 1..99999999999}                      *
*    The number of levels of subdirectories that should be     *
*    affected (0 = all)                                        *
* onlyFilesWithExtension {"" | "extension" | ["extension",     *
* "list"]}                                                     *
*    Only the fies with this extension are to be changed       *
*    ("" = all, no regexp) (arrays can be used ["htm", "html", *
*    "gif", "jpg", "jpeg"])                                    *
* NewAttributes:                                               *
*   readOnly {true | false}                                    *
*      Set files to read only?                                 *
*   hidden {true | false}                                      *
*      Set files to hidden?                                    *
*   archive {true | false}                                     *
*      Set files to archive?                                   *
*   system {true | false}                                      *
*      Set files to system files?                              *
var includeSubDirectories = true;
var numberOfLevelsDeep     = 0;
var onlyFilesWithExtension = "";
var NewAttributes = {
    readOnly : false,
    hidden   : false,
    archive : false,
    system   : false
//MAIN FUNCTION
function main(){
    chmod(path, 0, numberOfLevelsDeep, includeSubDirectories);
//OBJECTS
//FUNCTIONS
// This arguments are here just to pass information around during
// runtime
function chmod(dir, browseNumber, levels, subdirs){
    //If the number of levels deep has been reached and
    //the number of levels is not 0 then end
    if(browseNumber > levels && levels != 0){
        return;
    }else{
        browseNumber++;
    //get directory as a folder object
    dir = FSO.GetFolder(dir);
    var FILES = new Enumerator(dir.files);
    var DIRECTORIES = new Enumerator(dir.subFolders);
    for(; !FILES.atEnd(); FILES.moveNext()){
        try{
            //Change file settings
            var currentFile = FSO.getFile(FILES.item());
            //if we have an extension array...
            if(extensionIsArray){
                for(var i in onlyFilesWithExtension){
                    if(onlyFilesWithExtension[i] == ""
                    || FSO.getExtensionName(currentFile).toLowerCase(
                    ) == onlyFilesWithExtension.toLowerCase()){
changeAttributes(currentFile);
break;
}else{
if(onlyFilesWithExtension == ""
|| FSO.getExtensionName(currentFile).toLowerCase(
) == onlyFilesWithExtension.toLowerCase()){
changeAttributes(currentFile);
}catch(error){
WSH.popup("Unable to change file '" + currentFile + "'\n" + error.description, 0);
for(; !DIRECTORIES.atEnd(); DIRECTORIES.moveNext()){
if(subdirs){
chmod(DIRECTORIES.item(), browseNumber, levels, subdirs);
changeAttributes(DIRECTORIES.item());
}else{
return;
function changeAttributes(filename){
var err = "pagefile.sys";
if(("" + filename).substring(("" + filename).length - err.length, ("" + filename).length).toLowerCase() == err){
return; // The file is the virtual memory buffer... ignore!
//Try to use the filename as if it was a file.
//If operation fails, then we have a folder.
//In either case the change of properties should work.
try{
filename = FSO.getFile(filename);
}catch(error){
filename = FSO.getFolder(filename);
//Change the file/folder attributes if necessary
for(var i = 0; i < 4; i++){
if(filename.attributes & modes[i]){
if(!newca[i]){
filename.attributes = filename.attributes - modes[i];
}else{
if(newca[i]){
filename.attributes = filename.attributes + modes[i];
//CONSTANTS
var FSO = new ActiveXObject("Scripting.FileSystemObject");
var WSH = new ActiveXObject("WScript.Shell");
//VARIABLE DECLARATIONS
//geth the location of the script
var path = FSO.getParentFolderName(WScript.scriptFullName);
//If this is an array, element 0 will not be undefined
var extensionIsArray = onlyFilesWithExtension[0] + "" != "undefined";
//Convert object to usable array
var newca = [NewAttributes.readOnly, NewAttributes.hidden, NewAttributes.archive, NewAttributes.system,];
//[readOnly, hidden, archive, system]
var modes = [1, 2, 32, 4];
//changeAttributes("c:\\autoexec.bat");
//Go!!!
main();
dave.

Send mail via Lotus Notes R5

Does anyone have any examples of sending e-mail through Lotus Notes via forms 6i?
I have searched the forum and there seems to be very few items on Lotus Notes.
Thanks in advance.
Lakmal

Fainaly I found the way.. here is the coding
PROCEDURE send_email(p_recipient_in IN VARCHAR2,
p_copy_to_in IN VARCHAR2,
p_blind_copy_to_in IN VARCHAR2,
p_subject_in IN VARCHAR2,
p_text_in IN VARCHAR2,
p_return_receipt_in IN VARCHAR2,
p_no_of_attachments IN NUMBER DEFAULT 0,
p_mood_stamp_in IN VARCHAR2,
p_view_icon_in IN NUMBER) IS
-- Local Variable Declaration
lv_args ole2.list_type;
lv_db ole2.obj_type;
lv_doc ole2.obj_type;
lv_return_receipt VARCHAR2(1);
lv_session ole2.obj_type;
lv_attach1 ole2.obj_type;
lv_attach2 ole2.obj_type;
lv_mailserver VARCHAR2(200) := 'ew-cmb';
lv_sqlerrm VARCHAR2(255);
BEGIN
     lv_session := ole2.Create_Obj('Notes.NotesSession');
     lv_args := ole2.Create_Arglist;
     ole2.Add_Arg(lv_args, lv_mailserver); -- Mail Server
     ole2.Add_Arg(lv_args, 'names.nsf'); -- Mail File
     ole2.Add_Arg(lv_args, 'mail\Lakmal_M.nsf'); Mail File
     lv_db := ole2.Invoke_Obj(lv_session, 'GetDatabase', lv_args);
     ole2.Destroy_Arglist(lv_args);
     lv_doc := ole2.Invoke_Obj(lv_db, 'CreateDocument',lv_args);
     ole2.Set_Property(lv_doc, 'SendTo', p_recipient_in);
If (p_copy_to_in IS NOT NULL) then
     ole2.Set_Property(lv_doc, 'CopyTo', p_copy_to_in);
End If;
If (p_blind_copy_to_in IS NOT NULL) then
     ole2.Set_Property(lv_doc, 'BlindCopyTo', p_blind_copy_to_in);
End If;
-- Guidelines for mood stamp as to what argument values should be passed
-- ''- Normal
-- P - Personal
-- C - Confidential
-- R - Private
-- F - Flame
-- Q - Question
-- G - Good Job!
-- M - Reminder
-- J - Joke
-- T - Thank You!
If (p_mood_stamp_in IS NOT NULL) then
     ole2.Set_Property(lv_doc, 'SenderTag', p_mood_stamp_in);
End If;
If (p_subject_in IS NOT NULL) then
     ole2.Set_Property(lv_doc, 'Subject', p_subject_in);
End If;
If (p_text_in IS NOT NULL) then
     ole2.Set_Property(lv_doc, 'Body', p_text_in);
End IF;
--To embed attachments add the following lines to code immediately after
-- setting the 'Body' property :
If (nvl(p_no_of_attachments,0) = 0) then -- No attachments
     null;
Else
     lv_args := ole2.Create_Arglist;
     ole2.Add_Arg(lv_args, 'Attachments');
     lv_attach1 := ole2.Invoke_Obj(lv_doc, 'CreateRichTextItem', lv_args);
     ole2.Destroy_Arglist(lv_args);
     lv_args := ole2.Create_Arglist;
     ole2.Add_Arg(lv_args, 1454);
     ole2.Add_Arg(lv_args, '');
     Ole2.Add_Arg(lv_args, 'C:\Install.log');
     lv_attach2 := ole2.Invoke_Obj(lv_attach1,'EMBEDOBJECT', lv_args);
End If;
-- 1-Return Receipt
-- 0-No Return Receipt
lv_return_receipt := TRANSLATE(NVL(UPPER(p_return_receipt_in), 'N'), ' NY', '001');
ole2.Set_Property(lv_doc, 'ReturnReceipt', lv_return_receipt);
If (lv_return_receipt = '1') then
     ole2.Set_Property(lv_doc, 'DeliveryReport', 'B');
End If;
-- The following values can be used to set the icon that appears to the left
-- of the senders name.
-- 0 - none
-- 10 - finger with ribbon
-- 23 - newspaper
-- 74 - flame
-- 83 - thumbs up
-- 85 - happy face
-- 133 - envelope
-- 159 - star
-- 162 - question mark
-- 163 - investigator
-- 166 - glasses
-- 169 - red circle
-- 170 - gold circle
If (p_view_icon_in IS NOT NULL) then
     ole2.Set_Property(lv_doc, '_ViewIcon', p_view_icon_in);
End If;
ole2.Destroy_Arglist(lv_args);
lv_args := ole2.Create_Arglist;
ole2.Add_Arg(lv_args, 0);
ole2.Invoke(lv_doc, 'Send', lv_args);
ole2.Destroy_Arglist(lv_args);
ole2.Release_Obj(lv_session);
ole2.Release_Obj(lv_db);
ole2.Release_Obj(lv_doc);
EXCEPTION
     WHEN OTHERS THEN
     lv_sqlerrm := substr(sqlerrm,1,255);
     Message('Unable to send mail to ' || p_recipient_in);
     Message('Unable to send mail to ' || p_recipient_in);
     Message('Error is : '||lv_sqlerrm);
     Message('Error is : '||lv_sqlerrm);
     Set_Application_Property(CURSOR_STYLE, 'DEFAULT');
     RAISE;
END;

Cannot send mail from mac mail or Entourage

Hi guys,
Wondered if anyone out there can shed some light on this little problem.
I use Entourage for my emails & all was working fine until yesterday. I can receive mail from all and sundry but I can't send anything. I subscribe to ntlworld internet service and if log onto my email through their webmail, then it's fine. I've tried sending mail from mac mail and I get the same problem. I've been onto microsoft support & gone through all the troubleshooting with Entourage. The Entourage techy suggested it was my internet provider blocking my emails as they think I'm a spammer?? I phoned ntl & they insist it's nothing to do with them as I can send/receive from the website. (If I send an email with the address @ntlworld it's fine, but any other address i.e. all my clients/mates etc just stays in my outbox.
Nothing on any of my settings has changed so I'm at a loss what to do next.
Any suggestions greatly appreciated.
Thanks, Mel

it may be that your server (internet provider) has just started blocking outgoing mails not authenticated by them.
Go to your account set up...
and fill in the following details.
SMTP SERVER: smtp.mac.com
then click on advanced sending otions...
click on override default SMTP port... type 587
click on SMTP servber requires authentication...
use same setting as receiving mail server.
try this...

Unable to send Mail from POP account

I have an Iphone 4 and have upgraded the IOS from 5-1 to 6.1.3. Since then I have been receiving all my mails but i have been unable to send mails from my POP account. the notification "Cannot Send Mail. A copy has been placed in your Outbox. The receipient, "xxyyzz @ gmail . com " was rejected by the server" displayed. Please Help. the same thing happens when I configure my POP account on my Son's Iphone4, and there is no problem in receiving and sending mails from my Outlook. Please Help!!!!!
Can i revert back to IOS5.1.1?????

Contact your email provider and get the correct settings to use for the outgoing mail server (SMTP) on a mobile device. If it's email provided by your ISP, they have likely blocked email from outside their network from relaying to prevent spam.

Unable to send mail via .Mac

Similar Messages

Maybe you are looking for