Unable to send mails from SOST to Outlook
Hi,
We have an issue with the messages to be sent from SOST to MS Outlook. When we run the job in SOST, the messages are sent successfully (status shows in 'green' light) but the messages are NOT being received by the Recipient(s).
We have checked and verified the followiing :
1. User's ID is maintained in SU01.
2. Communication method is defined correctly in SU01.
3. In SCOT, default domain is correctly defined.
4. Also, in SCOT, correct Host, Port & Internet settings are defined.
Please let me know if we are missing anything.
Regards
Sudarsan
Edited by: Sudarsan Sampathkumar on Oct 29, 2010 8:52 AM
Hi,
If you could see the return code 73 in SOST then it means that the message is sent from SAP and now the message has to be flushed out from the exchange server. Check with the Exchange admin to have a look at that.
I assume that u have set all the relevant profile parameters.
Have a look at the [Link|http://tamboly.com/SAPEmailConfiguration.html] which will be helpful.
Regards,
Varadharajan M
Similar Messages
-
Unable to send Mail from POP account
I have an Iphone 4 and have upgraded the IOS from 5-1 to 6.1.3. Since then I have been receiving all my mails but i have been unable to send mails from my POP account. the notification "Cannot Send Mail. A copy has been placed in your Outbox. The receipient, "xxyyzz @ gmail . com " was rejected by the server" displayed. Please Help. the same thing happens when I configure my POP account on my Son's Iphone4, and there is no problem in receiving and sending mails from my Outlook. Please Help!!!!!
Can i revert back to IOS5.1.1?????Contact your email provider and get the correct settings to use for the outgoing mail server (SMTP) on a mobile device. If it's email provided by your ISP, they have likely blocked email from outside their network from relaying to prevent spam.
-
Hi All,
Some Users on randomly basis are unable to send e-mails from 2003 exchange to 2007 Exchange users Internally.
They are sending mails from outlook and users from 2007 dont have any issues.
But sometime mails from 2003 to 2007 goes without any issue.
The NDR reported is as below.
From: System Administrator
Sent: 22 February 2014 15:59
To: XYZ
Subject: Undeliverable: Regarding Test Message
Your message did not reach some or all of the intended recipients.
Subject: Regarding Test Message
Sent: 22/02/2014 15:59
The following recipient(s) could not be reached:
XXX,XYZ on 22/02/2014 15:59
The message contains a content type that is not supported
<HubServer.Domain.UK #5.6.0 smtp;554 5.6.0 STOREDRV.Deliver.Exception:PropertyValidationException; Failed to process message due to a permanent exception>Hi,
According to the NDR, I found this point "The message contains a content type that is not supported".
Please verify whether the un-delivered messages contain some Sensitive
Information, signatures or attachments that cannot pass the Exchange 2007 Edge server. Please also check the content type of the un-delivered messages.
Found a useful KB for your reference:
Frequently asked questions about MIME and content conversion in Exchange 2000 Server and in Exchange Server 2003
http://support.microsoft.com/kb/836555/en-us
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support -
I can't send mail from iphone4 using outlook
I am able to receive mail, but cannot send mail from my iPhone4. I am using Outlook - please help!
Thanks!Email does not sync to the phone via iTunes. Don't know where you got this idea. Email account info can be synced from a computer to the phone via iTunes, but that's it.
If the OP told us what happens when he tries to send mail, it might actually be helpful in troubleshooting. Without this information, we're just shooting in the dark.
That said, I'm willing to bet the SMTP server settings are incorrect. -
Unable to send mails from Azure SharePoint 2010 VM
Hello All,
I have created Site-to-Site VPN in azure to my on premise, and i have configured SharePoint 2010 environment in that. Then i have configured outgoing mail settings for a web application in that VM, but i am unable to send mails to external domain from it.
But i am able to send mails from my on premise VMs to external domains.
ThanksHey There,
Azure does not support smtp relay, you may want to use SendGrid (which working with Microsoft Azure).
After registration you get 400 E-mail per day free of charge.
From technical aspects youll get SMTP server, Username & Password which you can fill in your application.
Hope it helps.
Ido -
I am unable to send mail from my Orange.fr account on my ipad add
Orange.fr lost personal data on Sunday, so I decided to change the password on my mail account which I did successfully can pick up and send mail via Thunderbird on my PC. However, I had to delete my orange account from the mail application as it would let me change the password in settings. I can now receive mail OK, but I an unable to send as I get the message that "That the username or password for "SMPT (email address)@smtp.orange.fr" is incorrect. I have checked the server settings against those on Orange.fr website, and they are correct. Any ideas what the problem is?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
Unable to send email from Mac using Outlook for Mac 2011
I have a single user that cannot send email from the Mac after migrating to Exchange 2013 on-prem. I myself am on the same Exchange server and am using a Mac with Office 2011 and am able to send/receive emails without any issues.
When the user sends an email it goes to the sent mail folder and syncs with the server and can be seen on a windows machine running any other version of Office (same in OWA). I've logged the user in on my Mac and blown away my profile and seeing the same issue.
Not sure if this narrows my issue down to the Exchange server receiving the send request from a Mac or if it's some setting in Outlook on the Mac?
I do not see anything in the logs on the server and have not seen any error son the Mac.
Any thoughts as to where my issues is?Hi,
According to your description, I find that there is a single user cannot send email.
I suggest using Outlook on Windows machine and sending emails via this single user to verify whether the emails can be sent.
If the single user can send email via Outlook on Windows machine, it seems an issue on the Mac side.
I suggest asking Outlook for Mac Forum for help so that we can get more professional suggestions.
For your convenience:
http://answers.microsoft.com/en-us/mac/forum/macoutlook?tab=Threads
If can't send emails in Outlook, it seems an issue on the single user side.
I suggest trying to access the single user's mailbox via OWA to verify whether the mailbox has been migrated completely.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
Unable to send mails from SCOT
Dear Gurus,
we need to configure outbound mails from SAP to our mail server.
I did everything as per the note, when i tested sending the mail, the status is waiting.
in SOST it is observed the status is " wait for communication service", mails are not being sent to target
server from SAP.
Could you please let me know how can i solve this issue.
Thanks and RegardsHi
One common missing parameter is the default domain (exemple : johndoe.com)
SCOT -> settings -> default domain
check that in your SMTP node :
- the color is green
- the box "node in use" is checked
- SMTP connection is filled with right informations (smtp server address, port)
- 'support adress type' section -> Internet is checked and in the menu 'SET' in 'adress areas' you have a line with '*' value (this means that email can be sent to anyone)
Other check :
- at os level can you reach the SMTP service ?
telnet <server adress> <port>
Hope this will help you
Edited by: Aymeric Douyere on Feb 23, 2010 7:37 PM -
Sending mails from sap to outlook with pdf attachment
Hi All
I am using the function module 'SO_NEW_DOCUMENT_ATT_SEND_API1' to send
mail with the pdf attachment to a SMTP mail id(outlook). I have done all the configuration settings in SCOT transaction. But still i am not able to get the mail in my outlook mailbox. Following are the details of the steps i have followed.
step1.
Get the OTF data output from the SMARTFORMS function module.
step2,
convert the OTF output data to PDF format.
step3.
populate all the required table to pass data to the function
module 'SO_NEW_DOCUMENT_ATT_SEND_API1' -
packing_list
contents_bin
contents_txt
receivers
and call the function module.
After doing the above steps still i am not able to get the mail in my outlook mailbox. Please Help.
Thanks
Jitendra Kumar Tripathy.hi,
kindly chk the code i wrote for my program.
it will solve ur issue.
Internal Table declarations
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
wa_objhead TYPE soli_tab,
w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
wa_doc_chng typE sodocchgi1,
w_data TYPE sodocchgi1,
wa_buffer TYPE string,"To convert from 132 to 255
Variables declarations
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZZZ_TEST1'
importing
fm_name = v_form_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
call function 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
Fehlerhandling
if sy-subrc <> 0.
endif.
loop at i_tline.
translate i_tline using '~'.
concatenate wa_buffer i_tline into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
Attachment
refresh:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
Create Message Body
Title and Description
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = v_lines_txt * 255.
Main Text
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt )
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = '[email protected]'.
i_reclist-rec_type = 'U'.
append i_reclist.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
CONTENTS_BIN = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
if helped rwrd points
anver -
Issues when sending mail from sap to outlook in .csv FORMAT
hI all,
Im using 'SO_NEW_DOCUMENT_ATT_SEND_API1'
FM TO send a mail from SAP to user with attachment in .csv format but the data isnot getting displayed correctly ...
I thnk it is competely displayed in ASCII format ..
Can anybody give me suggestionson the same
thanksHi.
How is the user opening the .csv attachment?
I'm guessing that it should be opened with Excel.
Are you using an attachment document type of 'XLS'?
If not, then the attachment won't be opened with Excel unless the user right-clicks on it and does 'Open with'.
Even then, the user will have to use the Excel import wizard.
Is a .csv file what you want?
You can use the ABAP OLE stuff to write a native Excel file that can be attached to an email.
Or you can (at the cost of more work) write the Excel file (still type XLS) using XML, which gives you more control, and still works when your program is run in the background.
John -
Hi i am unable to send mail from yahoo mail id.can any one help on this?
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.io.*;
import java.util.Properties;
public class MailClient
public void sendMail(String mailServer, String from, String to,
String subject, String messageBody,
String[] attachments) throws
MessagingException, AddressException
// Setup mail server
Properties props = System.getProperties();
props.put("mail.smtp.host", mailServer);
// Get a mail session
Session session = Session.getDefaultInstance(props, null);
// Define a new mail message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
// Create a message part to represent the body text
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(messageBody);
//use a MimeMultipart as we need to handle the file attachments
Multipart multipart = new MimeMultipart();
//add the message body to the mime message
multipart.addBodyPart(messageBodyPart);
// add any file attachments to the message
addAtachments(attachments, multipart);
// Put all message parts in the message
message.setContent(multipart);
// Send the message
Transport.send(message);
protected void addAtachments(String[] attachments, Multipart multipart)
throws MessagingException, AddressException
for(int i = 0; i<= attachments.length -1; i++)
String filename = attachments;
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
//use a JAF FileDataSource as it does MIME type detection
DataSource source = new FileDataSource(filename);
attachmentBodyPart.setDataHandler(new DataHandler(source));
//assume that the filename you want to send is the same as the
//actual file name - could alter this to remove the file path
attachmentBodyPart.setFileName(filename);
//add the attachment
multipart.addBodyPart(attachmentBodyPart);
public static void main(String[] args)
try
MailClient client = new MailClient();
String server="pop3.yahoo.com";
String from="[email protected]";
String to = "[email protected]";
String subject="Test";
String message="Testing";
String[] filenames = {"c:\\gopi.txt"};
client.sendMail(server,from,to,subject,message,filenames);
catch(Exception e)
e.printStackTrace(System.out);
while compliling this one its compiled succesfully but i am getting exception at run time like..D:\mail>java MailClient
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/activation/re
gistries/MailcapFile
at javax.activation.MailcapCommandMap.loadFile(MailcapCommandMap.java:275)
at javax.activation.MailcapCommandMap.<init>(MailcapCommandMap.java:128)
at javax.activation.CommandMap.getDefaultCommandMap(CommandMap.java:44)
at javax.activation.DataHandler.getCommandMap(DataHandler.java:136)
at javax.activation.DataHandler.getDataContentHandler(DataHandler.java:568)
at javax.activation.DataHandler.getContent(DataHandler.java:501)
at javax.mail.internet.MimeBodyPart.updateHeaders(MimeBodyPart.java:1253)
at javax.mail.internet.MimeMessage.updateHeaders(MimeMessage.java:2012)
at javax.mail.internet.MimeMessage.saveChanges(MimeMessage.java:1980)
at javax.mail.Transport.send(Transport.java:97)
at MailClient.sendMail(MailClient.java:35)
at MailClient.main(MailClient.java:72)
can any one help on this....plz
thanks in advance
Edited by: Konapalli.Gopi on May 20, 2010 5:42 PMSomething's wrong with your CLASSPATH.
If you're not using JDK 6, you need to include activation.jar in your CLASSPATH.
If you've got any other jar files that define the javax.mail.* or javax.activation.* classes
in your CLASSPATH (such as javaee.jar or j2ee.jar), remove them. -
Unable to send mails from apex3.0
Hi friends,
When i am trying to push the mail queue i am getting this error..please help me
ORA-29278: SMTP transient error: 421 Service not available
Regards,
Rags.Hi Rags,
Look wether the SMTP Service is running.
Try to set smtp_out_server parameter to a valid smtp server.
Have a look at another thread:
ORA-29278: SMTP transient error: 421 Service not available
Also you have to read this document:
http://www.oracle.com/technology/products/database/application_express/howtos/howto_workflow.html
Could be the bug described in doc.id 4083461.8 on metalink, affects
all version prior to 10.2
Hope you find the solution,
ben -
Error in sending mail from SAP to microsoft outlook
Hi all.
Greetings.
I have a requirement to send mail from SAP to Outlook.
SMTP is configured here....i have checked the steps.
I am using FM "SO_NEW_DOCUMENT_SEND_API1" to send the mail text.
when i check the SOST Tcode i got message "Wait for communications service".
after evry 10 minutes the sap connect all process runs..as it is configured in SCOT transaction, but even after 30 minutes the mail is not sent.
I don't know how should i check the error message?
tell me the checking stepls plz?...how should i step through in checking this?
what are the prerequsites for sending mails from SAP to Microsoft outlook?
regards
Prashant Tiwari
Edited by: prashant tiwari on Feb 6, 2009 10:26 AMHi prashant,
Pls refer to the link below:
Re: Inbound Email- SAP Connect
or
check your userid .
If not correct no mail will go from u r id.
Try it with another user id.
or try using the following function module
'SO_NEW_DOCUMENT_ATT_SEND_API1'
I Hope this helps you with the issue.
Thanks
Ravi Aswani -
Unable to SEND mail using Activesync in Exchange 2010 server on iPhone or Windows Mobile 6.1
Hi All,
We've been setting up a new SBS 2011 server for a client this week. Everything is working, except the staff have 4 x iPhones to connect with Exchange ActiveSync.
There are 2 x iPhone 4's and 2 x iPhone 3Gs's. We can setup the Exchange accounts on each of the phones and they are all able to sync mail and calender etc with the server.
The problem we have is when any of them try to send mail from the phone, it gives an error : "Cannot Send Mail - An error occurred while delivering this message" and it sits in the outbox on the phone.
The newsgroups and forums are littered with people having issues with IOS4 and Exchange 2010 but most of these are from June-August 2010 when IOS4 version was around 4.00 or 4.01
A lot of these people had iPhone 3 handsets running with IOS 3.1.3 which worked with Exchange 2010 but when they upgraded to IOS 4, they had this problem sending mail.
It seems that for most of them, the fix came in the form of IOS version 4.1 which fixed the send issue for them.
We have a variety of Hansets and IOS versions (including an iPhone 3Gs running IOS 3.1.3) but are unable to send mail from any of them:
iPhone 3Gs IOS 3.1.3
iPhone 3Gs IOS 4.3.3
iPhone 4 IOS 4.3.3
iPhone 4 IOS 4.3.5
I was surprised that the iPhone 3Gs running 3.1.3 was unable to send either as nearly all the forums etc I read with this issue said the iPhone 3's worked with that IOS version.
Today we used a test iPhone 4 handset from our office to connect to an almost identical Small Business Server 2011 we setup two weeks ago for another client.
The test iPhone 4 was able to connect, Sync and Send email on that server but when set it to connect to this SBS 2011 server, it gets the "Cannot Send Mail" message the same as the others. So clearly the handset is working (on the other server at least),
it must be something misconfigured in this Exchange server right?
We ran the Exchange Remote Connectivity Analyser on the Exchange server and got green ticks across the board.
Outlook Web App and Outlook Anywhere both work normally. Everything we can test on the Exchange server works except sending from any iPhone.
Having said all that, I just setup a Windows Mobile 6.1 handset to sync with the Exchange 2010 server as a test, and it appears to have the same issue.
It will connect & Sync Mail, Contacts and Calendar but if trying to send an email from the phone, it will just sit in the outbox.
Does anyone have some insight into what the problem may be?Further to this .. I found the solution on a MS Exchange 2010 support forum.
It was not a certificate or firewall issue, looks as thought the “Accepted Domains” in Exchange Mgmt Console –
Org Config – Hub Transport cannot have any spaces in the name field.
I had some spaces and the emails were not downloading fully and able to send. Once I removed the spaces from the Name field and
restarting the Exchange and IIS services emails were now being sent and received ok.
Check
out :
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmobility/thread/321eae51-9cbd-4a5e-85c1-68d8f7b523c3
This
is good one to add to your knowledge bank in case you come across it in the future.
Rgds Gerry -
Hello,
I am using mail adapter to send mail from XI to outlook.
The following XML is generated. i am using mail package.
Now i face problem that when this mail comes to outlook the Subject line Danish special characters are coming properly
but the Danish chatacter like ø is not coming properly in body or content.
I have used encoding Base64 in communication channell.
Thanks for your help.
Regards,
Dhirajtry to change the encoding and that should fix the issue. Refer - XML encoding in mail adapter
use the encoding specified in this link -http://www.denmarkfacts.com/unicode.html
Maybe you are looking for
-
Process Chain : Read PSA and Update Data Target in BI 7.0
Hello Experts, In my Process Chain I have a variant Execute Infopackage to load the data only into PSA. then I have next variant as *Read PSA and Update Data Target*. my data target was a Master Data table Hierarchy In the variant " Read PSA and Upda
-
I cleaned and reauthorized my macbook air for resale. But I had upgraded to Yosemite before deciding to sell. (I bought a new machine). When I went to reboot it it asked for my authorization, and in order to bypass this I reset the internet connect
-
Testing file existence from client side
hi Is it possible to test whether an arbitrary file or directory exists (and is readable by oracle user) on the database server file system from an Oracle client application? I would need to do this on 10gR2 and 9iR2. br. aspa
-
Adding program RAEWUC1B to status management
Hello dear SAP Community, I do have the following problem which I hope you are able to help me with. I set up a monitoring task (Table Entry Counter) on the table EWUFI_BAL (table for the results of the execution of ABST2 --> Reconciliation of Asset
-
Why are my form tabs changing order?
I am manually setting form fill tabs in a multi-page document and each time I set a page and save, one of the previous pages reverts to the default order. Any idea why this is happening or how to prevent it?