Unable to send messages in XI

Hi iam trying to test a XML message in XI-component monitoring.
iam able to send the message but when i check in SXMB_moni this message is having the error..
NO_RECEIVER_CASE_ASYNC
No receiver could be determined
Can any body tell me where am i doing mistake.
Thanks,
Amith

HI ,
I checked the receiver determination for the service ,it has a receiver determined and there is no condition detemined.
Also the integration engine is in status red.what does this mean?
Can you please tell me what details should i give in the test message of component monitoring.
Its asking me for service,interface name and interface namespace...
all these details are to be given of sender ,am i right?

Similar Messages

HT1267 I am unable to send messages on my iPhone. I am getting an error when I send it. This just started this morning.

This is my first timeo n Apple Support. Suddenly this morning I am unable to send messages through my iPhone. I can send messages to one number, but all the other numbers I am sending to I receive an error message. Also, I can receive messages from the one number I can send to, but am unable to receive messages from any other number. What do I do to fix this?

Hi Steve,
No he has not turned iMessage off, infact when he sends me a message thru iMessage it says 'delivered'. I am at my wits end nd I don't know what to do anymore.

"Unable to send Messages" error?

Within the Messages app on my Galaxy S5 I'm getting an error message stating "Unable to send messages" on the space I would type in my text. How do I fix this?

Let's make sure we keep those messages flowing, NathanD96. stef7, provided a great suggestion with clearing the application cache. Were you able to do this successfully? If you are still having problems sending a message, please try deleting the entire thread and sending a new message.
AndreaS_VZW
Follow us on Twitter @VZWSupport

Email seems to be sent, but it doesn't arrive. No 'unable to send' message, sent items and draft folders are empty. The mail disappears.

Email seems to be sent, but it doesn't arrive. No 'unable to send' message, sent items and draft folders are empty. The mail disappears. I tried to fully turn off the iPad and have it restart. But it doesn't go off. I keep seeing the small white 'turning wheel' untill the battery is gone. After that, it works again (and so does the e-mail). This happens about every week. What can I do?

*there's no reason to be paranoid*
Says Mulder .
Anyway, as I mentioned, I don't use any sync-able email, just a very plain-jane POP email provider. iSync reports no devices and has nothing in its log, which matches my never having installed anything in need of syncing.
The thing is, if Mail says its sending something when nothing was ever sent, that's a largish bug whether it is actually sending something or isn't, and there isn't really enough info here to know which of those are the case. Maybe Mail just displays "Sending" because an attempt to do something reasonable is timing out, maybe it does an innocuous and normal POP thing using very confusing nomenclature, or maybe it's really trying to send something which has a wrong flag or something. There isn't really enough info to know what is going on, so I was hoping someone could identify the symptoms.

I downloaded the whatsapp app to my new iphone, and when i wanted to create an account, i could not, it said, unable to send message. I downloaded it several times later, but i still could not create the account, it always said, unable to send, help

I downloaded the whatsapp app to my new iphone, and when i wanted to create an account, i could not, it said, unable to send message. I downloaded it several times later, but i still could not create the account, it always said, unable to send, help

I recommend reaching out to Citrix via their support system -
http://www.citrix.com/products/receiver/resources-and-support.html
The receiver app has a specific list of servers it's compatible with, if the server is not on the list the app won't work in OS X.
http://support.citrix.com/servlet/KbServlet/download/28492-102-671726/Receiver%2 0for%20Mac%2011%204%20FAQ%20v1_1235.pdf
Do you know what server you're connecting to?

E52 "Unable to send message"

Hi everyone,
I buy E52 two days ago and i have a lot questions; at the first:
I have big problem with sending emails because i can't. I have personel mail account with my hosting and i retrieve all messages from my inbox but i can't send a mail.
I tried gmail account and it's works fine..
I configured my account with pop and imap (my mail server supports both). Both configuration retrieve mails but didn't sent! Always same error "Unable to send message: Name Surname <[email protected]>"
By the way I'm from Turkey and in the Turkey smtp 25 port is closed, we're using #587 port and i configured at the email account installation.

Actually i don't use with Service Provider, you know in the Turkey it's very expensive... I tried only with wireless lan. My salary can't cover Service Provider prices and I'm already use GSM not UMTS or 3G network for battery usage duration...
By the way, i want use my mail server not Nokia's servers or another... Why i'm connecting Nokia's servers?
We will try another phone to sure for problem source not phone... I guess you have two E series phone and i have only one Please try the account information in the below;
username:[email protected]
password:hadimassa
server (pop and imap, incoming and outgoing): mail.baskale.com
and you should use 587 port for smtp and use outgoing authentication option...
Message Edited by ebaskale on 05-Jan-2010 09:38 PM

Unable to send message in Service bus queue through Webrole which are connected to Azure VPN

I have created two Azure VPN and two cloud services(deployed webrole) and one service bus queue
First Azure VPN and cloud service(deployed webrole) is created in same affinity group.
Second Azure VPN and cloud service is created in West US
Service bus queue is also created in West US.
When I send message in service bus queue from first cloud service (same affinity group) then message sends successfuly
but when I send message in same service bus queue from second service(West US- Webrole) then unable to send message and not throwing any exception.
I don't know, whats happening?
Its very urgent..... client is waiting.
Please help me... Thanks.
hema

Thanks for reply. Got the cause but still looking for solution.
Actually we have created Azure VPN using Express route and
all are configured for Private Peering.
Try to access service bus queue from Web role which is attached to Express route network.
I am unable to access service bus queue and send message...because cloud services deployed in virtual networks are supported over the private peering path.
There are 3 types: public, private and default route (forced tunneling).
How can be configured for all 3 which will force all traffic through the tunnel except for Azure public service?
Do you have any idea on this scenario?
Thanks.
hema

Unable to send messages, Unable to send messages

Unable to send messages. Can receive messages

In a number of recent threads, here and on the Blackberry boards, it has been found that eliminating the "1" in front of the area code-phone number will resolve this issue.
With landline phones, you often have to dial "1" before the area code. I discovered long ago that it is not necessary to do so with my cell phone. It works with the "1" first, but also works without it.
Lately, the "1" has been interpreted by some phones' software as a country code for the US and pre-pends 011 to the phone number rather than just the 1, causing havoc, undelivered messages, etc.
The simple solution is to remove the "1" from all your contact phone numbers. And while you are checking and revising, make sure all your numbers include the area code as well.
HTH,

Unable to send message through iMessage

Unable to send message through iMessage.
Retry fails over and over again.
But able to receive from it.
Tried resetting network settings then it works again until the problem comes back.
Not sure what causes the problem. I do not wish to reboot my iphone everytime when it happens.
Seems like ios7 gm issues.
Never had this problem on the beta.
Anyone have any resolution to this?

iMessage is Activated.
Facetime is Activated.
Don't know what is preventing me from sending over iMessage.
Receiving is no problem. Even during the the time I was trying to send.

N73 is unable to send messages

I am facing this problem from a long time that I am unable to send message although I am receiving messages normally. i have checked the message center number, it is correctly saved.
Please can anyone help me.
@$¡ @£¡ ~ ScorpionS

What is your software version? Tried downloading the SMS Accelerator from Nokia.com? Last resort would be to update the software..

IMessage screen continues to be frozen. Unable to SEND message.

I Message screen continues to be frozen. Unable to SEND message.

Ha ha.....I answered my own question.... posting here for others benefit.
go to Settings>General>Restrictions and make sure you have "Enable Restrictions" turned on.

Help nokia e71 unable to send message help me fix ...

Hi
I brought a nokia e71 last 1 week (second hand unlock ) ,I got problem I can not send message when i start send message it view notice : unable to send message and detail : memory Full close some applications and try again. I checked my phone memory got free100MB free memory do not have message ,image , in phone and i checked not applications not open same time , i did again many time but not work..: (
please help me how I can fix
Thanks too much
Cheers

guys we all used e-series before, try moving the messages to the 'other' memory from the messaging app settings, what i mean is if they were on the memorycard move them to the internal memory, if they were on the internal memory card, move them to the memory card.
if that didn't work, jus backup everything, hard reset, and restore everything (skip the settings in the backup/restore) .
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

Nokia 5230 - Unable to send message

Hi,
I have bought Nokia 5230 on 10-Jan-2010, but I am not able to send SMS from my phone, I check the settings of message center (Airtel) and it is fine, but still I am not able to send the SMS. I throws "Unable to send message to <<contact namd>>. Please help to resolve this issue.
Regards,
Nandu

I also have a Nokia 5230. after using in several days, "Sim card invalid" appeared on screen. so i change the sim card with another. then it start appearing "connection error". I cant call or send texts. but my network bar is full. still it says it doesnt have a network. I reset it to factory settings, change dual mode to gsm vice versa even in umts, i reinstall my firmware even though i have the lastest one but still connection error on screen. take note my other sim cards works well on other cellphone but not in my nokia 5230.
by the way im in italy and using either Tim or Wind networks. thanks. i really need help!

Unable to send message by disabling imessage on iphone5

Hi, I am having below prob with my iphone5. ios 8.0.2
I am unable to send messages to other iphone contacts when having:
- wifi disabled
- mobile data disabled
- imessage disabled.
Message is not delivered through normal carrier either.

The calling is handled through Verizon but iMessages are handled through Apple.
In the settings turn on SMS when iMessage is not available and see if you can send ok.
First thing you can try is hold down the Home Button and the Power Button at the same time until you see the little white apple. Then release both buttons and let the device reset. You do not lose any apps or settings when doing this.
I still in need of assistance go to
http://www.apple.com
And check the issue on the help forum.
You can also go into a local Apple Store and they can assist you
Good Luck

Unable to send message: 451 Blocked

I use Chaos Intellect mail client to access my Verizon and non-Verizon e-mail. I've had FiOS since Oct 2008. Recently, as in the past week, I get the following message when trying to send mail from my non-Verizon e-mail accounts, "There are communication errors, Unable to send message: 451 Blocked - see http://www.spamcop.net/bl.shtml?98.111.230.147" The mail, of course, doesn't get sent. I have no problem receiving any mail. I checked spamcop and my domains are not listed, and their mail settings are correct. I have to disconnect from FiOS and connect via my Verizon wireless broadband card. There is no problem sending from the Verizon account.
How can I correct this so I can send non-Verizon e-mail when connected to FiOS?
Thank you,

idburns wrote:
kpier,
You need to use Verizon's SMTP server for all outgoing mail, wether it's from a Verizon account or not. SMTP servers don't care what mail they send.
Obviously you need to keep using your non-Verizon mail's POP server to receive that mail.
Message Edited by idburns on 04-01-2009 09:17 AM
Some SMTP server will block mail as spam if the from does not match the where from. Like [email protected] from a SMTP server named verizon.net. Many do block mail like this, but some do not. If you need reliable mail then I would say not to do it. You can send it with the reply to set for the other pop server but it is still a pain. I like many don't think Verizon should be fighting spam from their outgoing server. If someone is spamming punish that account not all of them! If has not been an issue for me since I shutdown my remote mail account but there are services that offer alternate port SMTP with custom domain names.

Unable to send messages and "send" function is unavailable when replying to a message.

I m unable to send messages and "send" function is unavailable when replying to a message.
My device is BB device model is 7290
IT Support Analyst

Typically this means a corrupt xxxxx [CMIME] service book. Go to Options > Advanced Options > Service Books. Highlight the xxxxx [CMIME] service book and press delete. Wait 30 seconds click the track wheel and select undelete. If this doesnt work you can have the service books resent by your BES admin (if BES connected) or send them to yourself from the BIS website (if its a BIS account).

Unable to send messages in XI

Similar Messages

Maybe you are looking for