Unable to send messages with attachments greater than 5 Mb using iPad 2

Hello
We are running into an issue in our organization where messages forwarded or composed from an iPad 2 ( iOS 6.1.0.3) with an attachment greater than 5 Mb fail to send.
iOS devices connect through MobileIron into Exchange 2010 SP1 RU8. Our message restriction on the Exchange end is 25 Mb.
Our MobileIron support team has ruled out any issue on their end. We cannot determine if the matter resides with the devide or Exchange, though we are suspecting the device.
We are able to forward or compose messages up to 5 Mb without an issue. We have also been able to receive different attachments up to 17 Mb without too much trouble, the exception being a 12 Mb MP4 video. The 12 Mb MP4 file would not download. This is why we're suspecting a device issue.
Has anyone run into something similar?

Are you certain it is not a limitation with your SMTP-server? OR the receiving end of your larger-than-10MB message?
Try and send a big one to yourself. If it doesn't work, try a free SMTP server.

Similar Messages

Sending Emails with Attachments greater than 255 chars in 4.6C

Hi,
I have a requirement in which i have to send mails with attachments greater than 255 characters. The attachment would be a tab-delimited .TXT file. Since i am working on 4.6C, i don't have the luxury of using the FM 'SCMS_STRING_TO_FTEXT'.
It's very urgent. So any help in this regards would be greatly appreciated.
Thank you.
Balaji

Hi,
Internal table to be passed to SOLIST1 type int, table and then compress this table using fm "table_compress" with the compressed table then call fm "table_decompress" and pass this to function module SO_NEW_DOCUMENT_ATT_SEND_API1.
Keep in mind the following variable
i_packing_list-transf_bin = 'X'.
aRs

In Exchange 2013 i cannot open mails with attachments greater than 19.6 MB in EWS or OWA

Hello,
i have in Exchange 2013 CU3 on Windows 2012 the following problem :
When backup mails using EWS i get the message " EWS Error Code : ErrorMessageSizeExceeded." in mails with attachments greater than 20.137 KB ( 19.6 MB).
Then I checked all the settings of the EWS , but the defaults are already significantly higher than these 19.6 MB (Base64 approximately 26.5 MB)
web.config ( maxAllowedContentLength = " 85000000 ").
Settings of the MaxSendSize and ReceiveSize are 300MB .
All requestfiltering settings in IIS are set to 85MB.
When i access via EMS or OWA , file attachments over 19.6 MB can not be opened .
However, the preview shows in OWA the correct mail including attachment and it can be saved from the preview up to the set maximum size.
By double clicking on an email in OWA bigger than 19.6 MB i get the following error message:
"Error : Your request can not be completed right now Please try again later . . "
Send and receive mail can also be up to maxsize .
When accessing via Outlook , this problem does not occur.
i hope anyone here can help me
Thanks in advance

Hi,
To change the maximum message size for Outlook Web App clients, you need to change the value of
maxAllowedContentLength, maxRequestLength and both instances of
maxReceivedMessageSize by editing %ExchangeInstallPath%ClientAccess\Owa\web.config in notepad.
To change the maximum message size for Exchange Web Services clients, you need to change the value of
maxAllowedContentLength and all instances of maxReceivedMessageSize="67108864" in %ExchangeInstallPath%ClientAccess\exchweb\ews\web.config.
When you are finished, save and close the Web.config file. Also need to restart IIS by running the following command:
IISReset /noforce
For more information about Configure Client-Specific Message Size Limits on Client Access Servers, please refer to:
http://technet.microsoft.com/en-us/library/hh529949(v=exchg.150).aspx
Thanks,
Winnie Liang
TechNet Community Support

@ FM to send email with width greater than 128 chars

Hi
Is there a FM which would send an e-mail with width greater than 128 chars.
Z-Send_email_attachemnt would limit the witdth to 128 char due to table EMAIL_TEXT LIKE table BTCXPGLOG.
BTCXPGLOG- field- Message(128)
Thanks.

Hi,
look in SE38 with BCS_EXAMPLE_*
I can use 255 char.
Regards, Dieter

Cannot send messages with attachments

I recently got a new 13" MacBook Pro with Snow Leopard. I setup Mail to work with our OWA Exchange Server and it works fine except for one major bug. I cannot send ANY messages that have attachments. Here's what I've tried so far to resolve the issue:
Tried a smaller attachment - no change
Tried a larger attachment - no change
Tried composing a new message - no change
Tried replying to a message - no change
Tried forwarding a message - no change
Tried different types of attachments (Word docs, pdfs, jpgs, etc) - no change
Updated to the OS to 10.6.1 - no change
What else can I try?

Right, forgot that part. It goes away for one second (as if the message has been sent), then comes back with this error:
Cannot send message using the server +(my smtp server settings)+. The Exchange 2007 connection to server +(our exchange server's ip address)+ failed. Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.
Below that, I get a list of SMTP servers, but since I only use one account with Mail, its just the Exchange entry. There are three button across the bottom: Edit Message, Try Layer, and Try With Selected Server.
If I select my Exchange server and click Try With Selected Server, it comes right back with this same error.
If I click Try Later, it puts in the Outbox, but never sends it. I left a message in there for a day once and it eventually gave me this error again for that message.
If I click Edit Message, and remove the attachment, I'm able to send the message.
My guess is that Mail isn't encoding the attachments correctly, which means I'll have to wait for Apple to fix the bug.

Unable to send messages with all networks only wit...

Hi,
I am using Nokia N8 from past 2 months , recently i am facing a new problem with my N8.
whenever i try to text a msg it's always resting on Outbox with the resent notification ,i am trying several times to send manually too but no joy. i have checked the message centre too all setting were perfect , to test with the service i have tested with different mobiles services too but it doesn't work , But after i changed the sim to other phone i am able to send messages then i found that there is no problem with Network it 's with N8.....can someone please let me know is there any chance to fix this bug
i am facing this problem not from begining ....from past 15 days onwards

Hi, I have the same problem with mine it started two days ago. I've updated the software but still have the issue. I've used my sim card in another phone and it works fine. I put another sim card in the N8 and had the same problem. Definately a phone problem. Called my network provider and the only option they gave me was returning it for repair. Seems rather major when the only problem I have is I can't send texts. Everything else still works as normal. I seem to remember having the same issue with my N95 a couple of years ago. Does anyone have any ideas on how to solve this problem? From other posts I read the software update should have solved the problem.

T'bird stopped sending msg with attachments or save it in drafts

When sending messages with attachments, I get the following error:
Sending of message failed.
Unable to open the temporary file C:\Users\Rick\AppData\Local\Temp\moz_mapi\Document - 14101501 Dairy Queen Hastings - Created Nov 24, 2014.pdf. Check your 'Temporary Directory' setting.
When I try to save it in Drafts:
Unable to save your message as draft.
Unable to open the temporary file C:\Users\Rick\AppData\Local\Temp\moz_mapi\Document - 14101501 Dairy Queen Hastings - Created Nov 24, 2014.pdf. Check your 'Temporary Directory' setting.
There was possibly a Windows update a few days before the trouble.
I can't find 'Temporary Directory' setting and wouldn't know what to do with it if I found it.

You need to delete the document from the C:\Users\Rick\AppData\Local\Temp\moz_mapi folder.
These folders etc are in the 'AppData' folder which is hidden by default.
You can make hidden files and folders visible.
* http://kb.mozillazine.org/Show_hidden_files_and_folders

Send emails with attachments residing in the network

Hi All,
My requirement is to send email with attachments. I am using javamail and it works fine only if the attachment resides in the local machine.
If the attachment resides in the network [the folder is shared by the user], the application gives me IOException.
Please help. Let me know if I am not clear.

Please find the trace below . Also I am able to browse the share but haven't tried writing a test app.
javax.mail.MessagingException: IOException while sending message
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:595)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at SendEmail.sendMail(SendEmail.java:66)
at FetchDetails.fetchResultSet(FetchDetails.java:69)
at FetchDetails.<init>(FetchDetails.java:36)
at Index.main(Index.java:3)
Caused by: java.io.FileNotFoundException: \xxx.xxx.xx.xxx\dinesh\dialog.gif (The
system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:103)
at javax.activation.FileDataSource.getInputStream(FileDataSource.java:80
at javax.activation.DataHandler.writeTo(DataHandler.java:287)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:747)
at javax.mail.internet.MimeMultipart.writeTo(MimeMultipart.java:361)
at com.sun.mail.handlers.multipart_mixed.writeTo(multipart_mixed.java:85
at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:83
9)
at javax.activation.DataHandler.writeTo(DataHandler.java:295)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeMessage.writeTo(MimeMessage.java:1673)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:555)
... 6 more
Cant send mail. IOException while sending message

Cant send emails with attachments

All of a sudden I cant send emails with attachments from my iphone or iPad.
Has anyone else had similar issues?
I have deleted and reset the accounts up and also tried different devices all with the same problem.

Please find the trace below . Also I am able to browse the share but haven't tried writing a test app.
javax.mail.MessagingException: IOException while sending message
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:595)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at SendEmail.sendMail(SendEmail.java:66)
at FetchDetails.fetchResultSet(FetchDetails.java:69)
at FetchDetails.<init>(FetchDetails.java:36)
at Index.main(Index.java:3)
Caused by: java.io.FileNotFoundException: \xxx.xxx.xx.xxx\dinesh\dialog.gif (The
system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:103)
at javax.activation.FileDataSource.getInputStream(FileDataSource.java:80
at javax.activation.DataHandler.writeTo(DataHandler.java:287)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:747)
at javax.mail.internet.MimeMultipart.writeTo(MimeMultipart.java:361)
at com.sun.mail.handlers.multipart_mixed.writeTo(multipart_mixed.java:85
at javax.activation.ObjectDataContentHandler.writeTo(DataHandler.java:83
9)
at javax.activation.DataHandler.writeTo(DataHandler.java:295)
at javax.mail.internet.MimeBodyPart.writeTo(MimeBodyPart.java:1248)
at javax.mail.internet.MimeMessage.writeTo(MimeMessage.java:1673)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:555)
... 6 more
Cant send mail. IOException while sending message

How to send a SOAP message with attachments

How to send a SOAP message with attachments thru webservice using axis-1_3 can any one sujjest.............................

Please refer
http://www.javaworld.com/javaworld/jw-09-2003/jw-0912-webservices.html
http://xml.sys-con.com/read/40315.htm

Exchange 2007 server will not send intra-organisation messages with attachments

Hi we have a problem with the Intra-Organisation connector between out Dubai and London office.
If they send us a plain message it is delivered OK, however if there is any attachment most of the time the message sits in the queue and continually retries. On some occasions messages do get delivered.
The errors vary between Connection Timed Out, Connection Dropped and 10061, No connection could be made because the target machine actively refused it.
As Dubai have a dynamic IP address they route all of their external mail via London and that is all going through OK. All of the other sites can send and receive OK with attachments both internally and externally.
To me this looks like I have a problem with the Intra-Organisation SMTP Send Connector on the Dubai server but I cannot spot anything that might be causing this issue.
They have worked previously however another issue did involve removing the Dubai server from the domain and adding it back in. Since then we have had this problem.
I have checked message size limits on the Send connector (100Mb) and the Transport settings (100Mb). I have checked the message size limits on the Intra-Organisation SMTP Send Connector (unlimited) and even on the user's mailbox (unlimited).
Any idea where I should be looking next?
Many thanks, Eddie

Hi Ed,
I think you may have hit on the problem - this is all one org so having read up more on this it should not be using this.
I spotted that the server was using this connector when I was looking the message tracking for the server and started looking into what it does and how to control it.
I used the Set-TransportServer command to set protocol logging on this to verbose, it get entries in the SMTP send logs like this:
2014-09-18T14:51:52.154Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,0,,192.168.4.5:25,*,,attempting to connect
2014-09-18T14:51:52.300Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,1,192.168.5.1:52766,192.168.4.5:25,+,,
2014-09-18T14:51:52.423Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,2,192.168.5.1:52766,192.168.4.5:25,<,"220 <remote server FQDN> Microsoft ESMTP MAIL Service ready at Thu, 18 Sep 2014 15:51:51 +0100",
2014-09-18T14:51:52.443Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,3,192.168.5.1:52766,192.168.4.5:25,>,EHLO <local server FQDN>,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,4,192.168.5.1:52766,192.168.4.5:25,<,250-<remote server FQDN> Hello [192.168.5.1],
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,5,192.168.5.1:52766,192.168.4.5:25,<,250-SIZE,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,6,192.168.5.1:52766,192.168.4.5:25,<,250-PIPELINING,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,7,192.168.5.1:52766,192.168.4.5:25,<,250-DSN,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,8,192.168.5.1:52766,192.168.4.5:25,<,250-ENHANCEDSTATUSCODES,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,9,192.168.5.1:52766,192.168.4.5:25,<,250-STARTTLS,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,10,192.168.5.1:52766,192.168.4.5:25,<,250-X-ANONYMOUSTLS,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,11,192.168.5.1:52766,192.168.4.5:25,<,250-AUTH NTLM,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,12,192.168.5.1:52766,192.168.4.5:25,<,250-X-EXPS GSSAPI NTLM,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,13,192.168.5.1:52766,192.168.4.5:25,<,250-8BITMIME,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,14,192.168.5.1:52766,192.168.4.5:25,<,250-BINARYMIME,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,15,192.168.5.1:52766,192.168.4.5:25,<,250-CHUNKING,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,16,192.168.5.1:52766,192.168.4.5:25,<,250-XEXCH50,
2014-09-18T14:51:52.576Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,17,192.168.5.1:52766,192.168.4.5:25,<,250 XRDST,
2014-09-18T14:51:52.591Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,18,192.168.5.1:52766,192.168.4.5:25,>,X-ANONYMOUSTLS,
2014-09-18T14:51:52.723Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,19,192.168.5.1:52766,192.168.4.5:25,<,220 2.0.0 SMTP server ready,
2014-09-18T14:51:53.072Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,20,192.168.5.1:52766,192.168.4.5:25,*,,Received certificate
2014-09-18T14:51:53.072Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,21,192.168.5.1:52766,192.168.4.5:25,*,FC006F5961FE665AD4FC1C0123FCEB6C0A477A49,Certificate thumbprint
2014-09-18T14:51:53.074Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,22,192.168.5.1:52766,192.168.4.5:25,>,EHLO <local server FQDN>,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,23,192.168.5.1:52766,192.168.4.5:25,<,250-<remote server FQDN> Hello [192.168.5.1],
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,24,192.168.5.1:52766,192.168.4.5:25,<,250-SIZE,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,25,192.168.5.1:52766,192.168.4.5:25,<,250-PIPELINING,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,26,192.168.5.1:52766,192.168.4.5:25,<,250-DSN,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,27,192.168.5.1:52766,192.168.4.5:25,<,250-ENHANCEDSTATUSCODES,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,28,192.168.5.1:52766,192.168.4.5:25,<,250-AUTH NTLM,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,29,192.168.5.1:52766,192.168.4.5:25,<,250-X-EXPS EXCHANGEAUTH GSSAPI NTLM,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,30,192.168.5.1:52766,192.168.4.5:25,<,250-X-EXCHANGEAUTH SHA256,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,31,192.168.5.1:52766,192.168.4.5:25,<,250-8BITMIME,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,32,192.168.5.1:52766,192.168.4.5:25,<,250-BINARYMIME,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,33,192.168.5.1:52766,192.168.4.5:25,<,250-CHUNKING,
2014-09-18T14:51:53.209Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,34,192.168.5.1:52766,192.168.4.5:25,<,250-XEXCH50,
2014-09-18T14:51:53.210Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,35,192.168.5.1:52766,192.168.4.5:25,<,250 XRDST,
2014-09-18T14:51:53.225Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,36,192.168.5.1:52766,192.168.4.5:25,>,X-EXPS EXCHANGEAUTH SHA256 ,
2014-09-18T14:51:53.225Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,37,192.168.5.1:52766,192.168.4.5:25,>,<Binary Data>,
2014-09-18T14:51:54.132Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,38,192.168.5.1:52766,192.168.4.5:25,<,235 <authentication information>,
2014-09-18T14:51:54.143Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,39,192.168.5.1:52766,192.168.4.5:25,*,SMTPSendEXCH50 SendRoutingHeaders SendForestHeaders SendOrganizationHeaders,Set Session Permissions
2014-09-18T14:51:54.163Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,40,192.168.5.1:52766,192.168.4.5:25,*,3757,sending message
2014-09-18T14:51:54.164Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,41,192.168.5.1:52766,192.168.4.5:25,>,MAIL FROM:<[email protected]> SIZE=98854 BODY=BINARYMIME,
2014-09-18T14:51:54.169Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,42,192.168.5.1:52766,192.168.4.5:25,>,RCPT TO:<[email protected]>,
2014-09-18T14:51:54.298Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,43,192.168.5.1:52766,192.168.4.5:25,<,250 2.1.0 Sender OK,
2014-09-18T14:51:54.300Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,44,192.168.5.1:52766,192.168.4.5:25,<,250 2.1.5 Recipient OK,
2014-09-18T14:51:54.316Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,45,192.168.5.1:52766,192.168.4.5:25,>,BDAT 98856 LAST,
2014-09-18T15:05:12.690Z,Intra-Organization SMTP Send Connector,08D1A167376C6407,46,192.168.5.1:52766,192.168.4.5:25,<,250 2.6.0 <23B7E7C020C8304085B1502492A968D13F75EA450D@localserver>
Queued mail for delivery,
So it does appear for some reason that the local mail server thinks it needs to use the wrong connector even though both servers that are in the same domain. It is odd that it only seems to affect messages with attachments.
Can you give me any suggestions to try and find the root cause of this problem?
Many thanks, Eddie

Mail message with attachments

I use iMacs for work. I often send email messages with attachments using Mail. Often, when sending email messages to Windows users (they are out there still), they will reply that they cannot open "the second attachment." The message seems to "pick up" a second apparent attachment, which is generally just a few K in size, and is not part of the original message or attachment. Unfortunately, though, it tricks the recipient into thinking that there are two attachments and the second one is meaningful So then they respond and I have to assure them that the second attachment is irrelevant and can be ignored.
Any thoughts on how to fix this, so outgoing email messages will only present the intended attachment?

That's a great question. I do use a signature, but inasmuch as it is simply text pre-inserted in the email message, I would be surprised if the signature somehow became stripped out and converted to an attachment. Nonetheless, I will try deleting the signature to see if that makes any difference.

"Unable to send Messages" error?

Within the Messages app on my Galaxy S5 I'm getting an error message stating "Unable to send messages" on the space I would type in my text. How do I fix this?

Let's make sure we keep those messages flowing, NathanD96. stef7, provided a great suggestion with clearing the application cache. Were you able to do this successfully? If you are still having problems sending a message, please try deleting the entire thread and sending a new message.
AndreaS_VZW
Follow us on Twitter @VZWSupport

Unable to process message with internal message

I am trying to find more information about this error I see in the App log. There are thousands of entries with different message IDs.
I have searched Google/Technet and cannot find anything that references this error message. Does anyone have any pointers on where to go to find the account causing this?
Source: MSExchange Messaging Policies
Event ID: 8208
Task Category: RedirectionAgent
Unable to process message with internal message ID: XXXXXX. Mailbox System.Object[]'s ForwardingSmtpAddress %3 isn't valid. Active Directory may have been damaged.

I have just started and taken over for the previous admin so am still learning the setup as well.
We have 3 Exchange 2010 servers (2 in the same location and one remote), all 3 have the same errors in event logs with varying message ids. Only 2 transport rules (One for large attachments and one to add a disclaimer) and both appear to be working correctly.
I was hoping to find a way to track down more information about the message based on the ID to see if I can find any similarities but have not found a way. I have found how to find the message ID based on sender/recipient/etc. but not the other way.

Unable to send messages, Unable to send messages

Unable to send messages. Can receive messages

In a number of recent threads, here and on the Blackberry boards, it has been found that eliminating the "1" in front of the area code-phone number will resolve this issue.
With landline phones, you often have to dial "1" before the area code. I discovered long ago that it is not necessary to do so with my cell phone. It works with the "1" first, but also works without it.
Lately, the "1" has been interpreted by some phones' software as a country code for the US and pre-pends 011 to the phone number rather than just the 1, causing havoc, undelivered messages, etc.
The simple solution is to remove the "1" from all your contact phone numbers. And while you are checking and revising, make sure all your numbers include the area code as well.
HTH,

Unable to send messages with attachments greater than 5 Mb using iPad 2

Similar Messages

Maybe you are looking for