Unable to send or receive texts and calls

For nearly two weeks I've been unable to send or receive texts and calls I have tried resetting my phone deleting existing call / text convos and taking the sim out of my phone 4g internet still works but nothing else I'm using an iPhone 6. Why can't I send or receive anything?

Hi ,
Very sorry this is happening,
Have you tried the SIM in a different phone?
Also have you tried a network reset?
Note: Resetting the network settings will clear all WiFi passwords and refresh device network connections.
From the home screen, tap Settings.
Scroll down to, then tap General.
Scroll down to, then tap Reset.
Tap Reset Network Settings.
Tap Reset Network Settings to confirm.
Note: If a security code is enabled, this will need to be entered between steps 4 and 5.
Thanks.

Similar Messages

  • Unable to send or receive text messages

    I just activated my Droid Razr and I'm unable to send or receive text messages.  Sending and receiving phone calls and emails works fine.  Any ideas?

        Thanks to the community for your contributions.
    Hello Tim952,
    I use text messages on a daily basis to keep in touch with friends and family so I understand how important it is to get this resolved. How long have you had this issue? What zip code are you located in? Do you receive an error when sending a message? Are you using a third party messaging application? If so, please remove and retry with the stock messaging application. Please share additional details so I can better assist.
    DaisyP_VZWSupport
    Follow us on Twitter @VZWSupport

  • Unable to send or receive texts, talk to text not working, unable to talk to Siri. Two days now. Is it the phone? Is it the network? Do I really have to go dig out my old Blackberry to send a text after buying a $400 phone?

    For the past couple days I have been unable to send or receive texts, can't use voice to text, can't talk to Siri.
    Three reasons I have the phone.
    $400 for a new paperweight. Just what I needed for Xmas!

        We certainly don't want to lose you as a customer megarga! Let's partner together and get your wireless concerns addressed. When you received the iPhone, did you set it up as new or restored from a previously owned iPhone/Apple ID? What model iPhone do you have? If you have restored from a previous iPhone then how much available device memory do you have? As you share the details then we can customize a solution for you.
    Thank you…
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Unable to send or receive text messages after updating iOS to 7.0.2

    I am unable to send or receive text messages aftering updating to iOS 7.02. I have an iPhone 4S. I have run all the suggested troubleshooting still can't text. I have been to my carrier, AT&T, there is no issue with my account. AT&T suggested resetting the phone to factory defaults (thereby wiping it clean). I am trying to avoid that as I had issues with transferring data & contacts before. Any one have a work around?

    Try this iMessage workaround
    Look for a fix by Apple by the end of the week.....

  • Since the new year I have been unable to send or receive texts from someone I text daily...he does not have an iPhone

    Since the new year I have been unable to send or receive texts from someone I text daily...he does not have an iPhone

    Mail: Troubleshooting sending & receiving email messages

  • I can't send or receive texts or calls? How do I fix this?

    I can't send or receive texts or calls for the past few days.  How do I fix this?

    Contact your carrier to rule out network issues.

  • Repeated "Call Failed" and unable to send or receive Texts or VMs

    Please Help Me:
    I have a beloved iPhone 3G and it has been no problem for the year and a half that I have owned it. Until last week...
    All of a sudden I am periodically getting repeated "Call Failed" screens when I attempt to make an outgoing call. Not once or twice but for hours at a time, I cannot call out or receive calls-in, nor can I send or receive text messages.
    Sometimes it will click-back-in (whatever that means) and I will suddenly get three voice messages and texts from my wife saying, "Where are you and why is your phone going straight to VM???"
    What did I do to troubleshoot?
    1. When I power off and power back on my phone it sometimes starts to work again.
    2. If I do a Home Button plus Power Off it works, until it "clicks off" again.
    3. I called AT&T support, they checked for network outages and there are none.
    4. I took the sim card out and blew-in it (a la Nintendo-HA!)
    5. I updated it. I hadn’t updated it since March. This took a while, because I kept getting an error (2003) message. But eventually, I completely UPDATED IT and RESTORED THE PHONE. I now have 4.0.2 on my iPhone and iTunes 9.2.1.
    6. It looked like the update/restore worked but then it started happening again.
    7. The problem is not local, i.e. it happens to me not in just one area but on the road, at home, at my office, out of my home area, etc.
    I’d prefer to only have to buy a new cell phone every two or two and a half years, rather than on an annual basis. I do not have an extended warranty or AppleCare.
    Does anyone know of any other hard-fix for this.
    I’m willing to take a gamble, because I know the next step is to go to AT&T and they’re just going to tell me I need a new phone (likely the same for an Apple Store as well).
    The rest of the phone is working fine. Even when getting Call Failed, I still can use the Internet and other applications.
    My phone connects properly to my PC (Windows XP) and my bars and network connection appear to be accurate, meaning that I’m not getting zero bars when the Call Failed screen appears.
    Any help, insight, etc. would be greatly appreciated.
    Thank you.

    Alright, it's fixed:
    Switching Airplane Mode and/or "Show My Caller ID" OFF and ON or vice versa did work momentarily, particularly the Airplane Mode.
    HOWEVER, I read someone's post on another website about disabling 3G!
    Just recently my area received 3G (I know Pennsyltucky). So maybe the turnover had some effect on my phone. (AT&T did not admit to that when I called but...)
    Anyways, go to Settings > General > Network > switch "Enable 3G" to OFF
    It has worked for 24 hours, so keeping my fingers crossed.
    Please note that this may only be a fix for the older 3G iPhones (I bought mine new right when the 3GS was released). Plus, our area just received 3G networking.
    Hope this helps someone else.

  • IPhone 4S no longer will send or receive texts or calls even though it shows I'm connected to my Sprint Server.

    Hello everyone, I'm in need of some major help with my IPhone 4S.  I'm very confused and frusterated!  My friend had originally purchased two IPhone 4S phones about two years ago.  I know this because he decided to give me his second IPhone 4S that was no longer being used by the person who had it before, since I didn't have a phone and he had it on a two year contract. That two year contract ended months ago and he renewed it for another two years.  Everything had been working pretty well except crappy reception at my house every now and then, since I live in the middle of nowhere.  But where my problem comes in is, for the past few days I haven't been able to send or recieve texts or calls at all. It just keeps saying failed to send when I try to send a text, and it won't receive any texts.  When I try to make a call, it goes to a couple different weird recording things trying to ask what type of call I'm making, or saying the connection can't be made. I can't recieve calls at all.  I have no idea why this happened, it was really random, and I'm very frusterated.  It always shows my phone having two or three bars and service, more than enough to do these things, but for some reason it's ike it's become disconnected.  This type of thing happened a few weeks ago, but only for a few hours and then I started getting all my texts and whatnot and it went back to normal.  But now it's lasted almost a week.  I have Sprint and even when it shows me having 3G service and all bars, it won't send or recieve calls or texts.  I tried resetting network settings, and that didn't change or fix anything.  I've also tried shutting it off and turning it back on multiple times and the whole airplane mode on and off thing and NOTHING is working.  If any of you could help, or offer suggestions, that'd be awesome. Much appreciated!

    I'll have to use somebody else's phone for the call, but I was thinking maybe that's my last option. :/  Thanks!

  • Unable to send or receive text messages after apply s/w update on Q10

    After apply software release 10.1.0.4181 (size 6mb) on my Q10, I can no longer send or receive text messages, pls help. At first I thought the text messages were only collapsed, but I am unable to send, receive or open any previous chat. I have rebooted the device multiple times, including removing the battery. When trying to do a text message, system seems stuck on the last message received yesterday, and am unable to open this chat session, reply, compose. I cannot compose for any contact, nor able to receive any text messages. PLs help !!
    Solved!
    Go to Solution.

    I removed my battery again, this time left out for 5 minutes. SMS is now working again. (previously approx 2 min)
    However, the problem I was experincing, I have had before, where I cannot send an sms message. I believe I may have hit a hot key and basically does not allow you to send a message. Typically I reboot at this point and sms works again. I will try your new os option after I verify all is working properly again.  Thank you for your help.

  • Unable to send or receive text mesages

    I just changed my plan last week to include texting. however I am unable to send or receive any messages When I send  It reports message failed

    ronb65
    I'd be lost without my text messaging! Let's get this up and running for you. Were you able to text before the plan change? Are there any other Verizon Wireless customers having the same issue? Also, what type of device do you have?
    ChristinaM_VZW
    Follow us on TWITTER @VZWSupport
    If my response answered your question please click the _Correct Answer_ button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Unable to send or receive text from another iphone after updating ver 7.02

    Before updating ver 7.02 I was able to send and receive text to any cell phone. After updating to ver 7.02 can no longer send nor receive any text from any iphone 4 or iphone 5. Can send and receive to/from an old iphone 3 and to any non-iphone but not iphone 4 or 5. Tried updating iTunes then restore phone from backup, no change. Deleted apps that were no longer being used and transferred all my pictures on phone to a folder on computer then deleted then out of iTunes. Tried restoring again, once again no change.
      Not having any idea what else to try, went to AT&T store for help. Pretty much got a shrug of the shoulders with the response of yep, a lot of texting problems after 7.02 update. No help at all.
    Anybody else have or had this issue? If yes,  what did you find causing the problem?
    Thanks in advance.

    Thanks for the response. I tried so many things forgot to list that I did try turning off iMessage, reset network and turned network back on- no change. Also forgot to mention it's my wife's phone, I'm more old school. If I need to talk to somebody, I just call since I already have a phone in my hand. That's my solution to the problem but she doesn't think so. LOL. Also tried hard restarting several times, didn't make any difference. I am still fiddling around with it, if I come up with anything I will post it.
    Thanks again for the help.

  • Unable to send or receive text on iphone 5s

    Unable to send a text or receive one on my iphone 5s

    SMS/MMS, which are true text messages (not iMessage) are a carrier function. You need to contact the carrier and have them check your account to see if you have a SMS/MMS plan on your account.

  • My iPhone4 loses signal and when I do hard reset, I can't send or receive SMS and calls. I have to back-up and restore weekly!

    It started last month before I ungraded to iOS5. So my network provider advised me to upgrade. It fixed the problem but it happens again after several days. I lose signal then when I do hard reset, signal is back but I can't send or receive SMS or make and receive calls. But from the other end my phone is ringing but nothing is happening to my phone.This is really frustrating! Coz it happens weekly and the only way to fix it is to back-up and restore. Which is a hassle coz it takes me about 3 hours! Please help. My phone is still under warranty but the provider is telling me it might take them 3 months to check and fix.
    I think there is a bug with the iOS5 coz it happen when it I upgraded. Before I was quite happy with my iPhone4 but now it has become a source of anxiety and stress. I've received a lot of complaints at work coz they couldn't contact me.

    Try to set it up as new device without using the last backup: How to back up your data and set up as a new device

  • Unable to send or receive text messages after apply 10.2.1 ATT update on Q10

    My daughters Q10 with the 10.2.1 (recent ATT update) is experiencing this every few days. The screen freezes unable to send and unable to delete messages.
    reboot (three times) did not fix the problem.

    I removed my battery again, this time left out for 5 minutes. SMS is now working again. (previously approx 2 min)
    However, the problem I was experincing, I have had before, where I cannot send an sms message. I believe I may have hit a hot key and basically does not allow you to send a message. Typically I reboot at this point and sms works again. I will try your new os option after I verify all is working properly again.  Thank you for your help.

  • Unable to send or recieve texts/phone calls

    my mom and I both have the iphone 4 and neither one of us are able to send or recieve messages or phone calls, the texts works very spuratically but this is extremely annoying! I need my phone for work reasons and if I am not able to recieve the calls how am I supposed to know if I am being called into work or not?! The techs keep telling us that it has to be the phone but with it being two different phones, how is that possible? Are we the only ones have this problem or is there a network outage somewhere here in Colorado that is affecting us? This needs to get fixed ASAP seeing as how I also had an emergency last night and could not place a call!

    Southern California. Texts working OK, but no calls in or out.  The cell phones all get "unable to complete"; when calling them from landlines there's either a fast busy or "not in service or disconnected." We don't use data so don't know about that.
    The news said there was a big outage of data, both 3G and 4G, in many places across the country today, but that it was largely fixed by 2:30pm ET.
    Probably overload from the RNC.

Maybe you are looking for

  • How to pass parameters to a page invoked using java script.--- Very Urgent.

    Hello, I have an advanced Table in my page. In the first column there is a messageChoice. In the second column there is link item.On the link item i have set the following value for destination uri. javascript:var a=window.open('OA.jsp?page=/AutoSale

  • Using both iPhoto 6 and iPhoto '08 - 3rd party software?

    Hey guys, I recently purchased and installed iLife '08. After doing this I tried to run Still Life 2.3.4 This is a program that allows you to zoom and pan across photos for iMovie exactly the way you want. When I tired to run this program and open an

  • 11.2.0.3 RAC on HPUX ASM certification

    Hi All, I'm planning to install 11.2.0.3 RAC on HPUX, during the certification searching, I found below result: a) Oracle Cloud File System, the certification list not showing any HPUX platform.  (I'm planning to use ASM cluster FS) b) Oracle Real Ap

  • Call java class from VB

    Hi all experts, I want to package the java class as dll so that I could call them from VB in an server without java installed. Is it possible ? I have search a lot of information but all of them require the deploy server java installed such as javare

  • EP Naming Conventions and Best Practices

    Hi all Please provide me EP Naming Conventions and Best Practices documents Thanks Vijay