Unable to send or receive texts, talk to text not working, unable to talk to Siri. Two days now. Is it the phone? Is it the network? Do I really have to go dig out my old Blackberry to send a text after buying a $400 phone?

For the past couple days I have been unable to send or receive texts, can't use voice to text, can't talk to Siri.
Three reasons I have the phone.
$400 for a new paperweight. Just what I needed for Xmas!

We certainly don't want to lose you as a customer megarga! Let's partner together and get your wireless concerns addressed. When you received the iPhone, did you set it up as new or restored from a previously owned iPhone/Apple ID? What model iPhone do you have? If you have restored from a previous iPhone then how much available device memory do you have? As you share the details then we can customize a solution for you.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Send and Receive to internet outside is not working

Hello everyone,
I have just launched my own exchange 2013 infrastructure on server 2012 R2. everything works within the organization. however, send or receive emails to outside on the internet is not working. here is the info and what i have done so far:
My organization domain is .local,
I have created accepted domains as mail.mydomain.com ( mydomain.com) is registered with powweb.
I created send connector and receive connector is already there by default on exchange 2013
send connector is MX record type. I also setup two mx records on my external DNS as follow
mail - IP address of my router ( then port forwarded port 25 to my exchange IP from router)
@ - mail.mydomain.com
* - Mail.mydomain.com
CAN anyone plz help me what am i doing wrong ... i have been working on this till 4 am and its frustrating me
and finally i got this message from my end when i send to outside email:
Diagnostic
information for administrators:
Generating server: EX2013-MBX-CAS.MYDOMAIN.local Receiving server: hotmail.com (65.54.188.72)
[email protected] Remote
Server at hotmail.com (65.54.188.72) returned '400 4.4.7 Message delayed' 7/3/2014 11:21:39 AM - Remote Server at hotmail.com (65.54.188.72) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect.
Winsock error code: 10060, Win32 error code: 10060." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 65.54.188.72:25'
Original message headers:
Received: from EX2013-MBX-CAS.MYDOMAIN.local (MyrouterIP)
by EX2013-MBX-CAS.mydomain.local (MY PRIVATE EXCHANGE IP) with Microsoft SMTP Server (TLS) id 15.0.847.32; Thu, 3 Jul 2014 03:08:05 -0500 Received: from EX2013-MBX-CAS.mydomain.local ([::1]) by EX2013-MBX-CAS.mydomain.local ([::1]) with mapi
id 15.00.0847.030; Thu, 3 Jul 2014 03:08:05 -0500 From: Riaz Ansary <[email protected]>
To: "[email protected]"
<[email protected]> Subject:
Good Morning Thread-Topic: Good Morning Thread-Index: Ac+WleelD8gwEYWTQdKbx6+rBbFpXw== Date: Thu, 3 Jul 2014 08:08:05 +0000 Message-ID: <[email protected]al>
Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [192.168.0.150] Content-Type: multipart/alternative;             boundary="_000_80e53235c8a44adca31979bdeb206a7bEX2013MBXCASCYNASOLUTIO_"
MIME-Version: 1.0

Telnet to hotmail failed here is the result
Microsoft Telnet> o mx1.hotmail.com 25
Connecting To mx1.hotmail.com...Could not open connection to the host, on port 2
5: Connect failed
here is the SMTP test i did for incoming
Unable to connect after 15 seconds.
Test
Result
SMTP Connect
Failed To Connect
More
Info
Session Transcript:
Connecting to MyROutherIPAddress
7/3/2014 12:11:00 PM Connection attempt #1 - Unable to connect after 15 seconds. [15.01 sec]
MXTB-PWS3v2 15007ms
reverse lookup
blacklist
port scan
subnet tool
Reported by mxtoolbox.com on 7/3/2014 at 12:10:45 PM, just for you.  (History)  Transcript
mx:cynasolutions.com   Find Problems
mx
Register for a Free MxToolBox Account for access to more features.
Pref
Hostname
IP Address
TTL
30
mail.mydomain.com
MYROUTERIP
60 min
Blacklist Check      SMTP
Test
dns lookup
dns check
whois lookup
spf lookup
Reported by ns2.powweb.com on 7/3/2014 at 12:10:25 PM (UTC -5), just for you.  (History)  Transcript

Send and Receive script for Outlook 2011 not working

I used to have a script to send and receive mail in Entourage. When I change the script to:
tell application "Microsoft Outlook"
connect to every pop account
connect to every imap account
send
end tell
It hangs at the second line and I am not able to fix it, anybody know how to do this?

I don't have any accounts in Outlook to test, so this is a bit of a long shot, but could it be that you want something as simple as the following? I assume this is part of something bigger, as cmd-k will do the same thing.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;">
tell application "Microsoft Outlook"
send and receive all
end tell </pre>

I have an phone 4s from cricket and when i text non iphone users such as android or and other phone brand they receive my text message but when they reply i wont get there message. send imessages is working its just my text message that is not working.

i have an phone 4s from cricket and when i text non iphone users such as android or and other phone brand they receive my text message but when they reply i wont get there message. send imessages is working its just my text message that is not working.

You use Restore to get the latest firmware build, not the Update button. You can only use the Update button, if there is an iOS update, say iOS 5.1.
this link talks about updating to 9A406 to fix the "No Service" issue with iPhone 4S:
http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html

After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out

After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out. There is no function at all.

Ok I fixed the issue, turns out a couple of weeks ago, I downloaded a program that was suppose to help shrink some of your stuff to use less data, it was called Onavo. It was suppose to show you how much data you use to help keep you within your limits. If you have downloaded this, go through your settings and delete it and it will fix the problem. At least it did for me. I can now send photo's to non Iphone users via text no problem.

HT4946 I have had my iPhone for about a year, and I have a photo file from my old blackberry. When I go to back up my photos, it only backs up the camera roll. How do I back up the other album? The laptop where I had those photos broke, please can someone

I have had my iPhone for about a year, and I have a photo file from my old blackberry. When I go to back up my photos, it only backs up the camera roll. How do I back up the other album? The laptop where I had those photos broke, please can someone help.

You're going to have to email those photos to yourself.

I wanted to send a push notification, unfortunately it does not work. The page will not load. Anyone know why?

I wanted to send a push notification, unfortunately it does not work. The page will not load. Anyone know why?

Push notifications, I believe, is only for iOS.
If it is for iOS, take a look at Using Apple push notifications with Digital Publishing Suite | Adobe Developer Connection

I upgraded to iso6.0.1 on 4s and now the battery runs out quickly and text sounds/music do not work. Please can someone help.

Help - I upgraded to iso6.0.1 and now the battery runs out quickly and the text and sound does not work! can anyone help me?
Thanks

Use the search box at the top of this page or look in the MORE LIKE THIS box to your right. If you can find your way to this forum, you certainly can manage a search.

Send to bluetooth right click option DOES NOT WORK

hi guys can you help me send to bluetooth right click option does not work!when i am going to send something it says windows cannot access the specified device,path or file you may not have the appropriate permissions to access the item please help me!i
have windows 8

this is how we send file using Bluetooth
http://superuser.com/questions/540498/open-bluetooth-file-transfer-wizard-in-windows-8
Did you pair this 2 device before?
May I know the destination device? its comes with WIFI?
tips: rather than Bluetooth, I suggest you using file sharing with WIFI, its more faster

Send email when ownership is assigned' is not working

Send email when ownership is assigned'
is not working
even though this option is disabled designer workflow task creation sends an email to the user when task is assigned to the user.
We have october CU updates 2013.
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
Per my knowledge, if the task is created from a workflow, then you may use the task actions in the workflow.
And some task actions will send an email to the user who the task is assigned to, so the email is sent from the workflow and it is not sent from the option “Send email when ownership is assigned”.
If you are using 2013 workflow, the send email action cannot be prevented from the workflow.
If you are using 2010 workflow, you can go into the task process to delete the Send an Email action.
https://support.office.com/en-nz/article/Use-the-task-process-editor-for-approval-workflows-8680b4a4-36b1-441c-b070-e515976078aa#__toc264538566
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Text messages ringtones are not working in the Storm Two

Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
Vernon

Hi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L

My text messaging app is not working PLEASE HELP!!!

My text messaging app is not working at all is a blank screen when I open it! Help!!!

No its a well known bug with iphones caused by their over complication of things and their complacency that their users will buy the phones on looks alone irrespective of its basic functionality.
Suggestion 1 - The most common suggested solution seems to be: iMessage needs switched off on all your devices and switched back on after a rest. I found that this did NOT work.
Suggestion 2 - Having a Wi Fi Signal seems to confuse iMessage to send an SMS as a text or as an iMessage. Turn off WiFi on your phone and manually send as text message. Slow, I lnow!!
Suggestion 3 - Move away from any wifi source ie out of range.
Suggestion 4 - Send an email, or a letter. Its more personal!!
20 Minutes later - still not sent 2 short texts.
Apple are very complacent and disdainful of their user community. Not what Id expect but this is a global corporation with the same business ethics as an Oil company or a car company. Profit not function.

Drag n Drop selected Text from Safari, chrome not working on indesign CC

In CS6 If we drag drop any selected text from any app on layout it work but in indesign cc it is working only with some app like TextEdit, notes etc. I knew that very few people have such use case but same is also not working from one of my cocoa app.
while debugging if i drop content from TextEdit and Notes app on some sample app I found that TextEdit & Notes App registered for this Extra Pasteboard type "com.adobe.indesign-import-ustl" and "com.adobe.indesign-import-styl" where as chrome and safari are not. similarly my app is registered only for "NSPasteboardTypeString" type. Is this is the limitation or bug of indesign?

Similar bug(#3710667) was exist in CC before 9.2.2 update as you can see in release notes of 9.2.2(CC last update) here. before fix simple selected text drag & drop did not work from any application except TextEdit .I have also spent hours before this update to find out bug I used ClipBoardViewer sample App to find out current Drop flavour and its content it may help you and before fix I find some workAround first is add flavour in your drop which Indesign understand even if you are not adding any data for that flavour so that you start receiving couldAcceptType() and under this call parse your actual data from PasteBoard and remove all data from pasteBoard so that another next helper will not consume it. as you mention even after adding text flavour your couldAcceptType() not hit so may be this WorkAround not work for you but it worked for me.
second is just a finding i.e before doing drag and drop on indesign create one new document (from Indesign UI not programmatically ) save it on disk close it and reopen it after it every drag & drop will start working work .

I just upgraded to Yosemite. Iphoto is now broken. Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

I just upgraded to Yosemite. Iphoto is now broken. Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept iPhoto into your Apple ID, do so.
2. Move it out of the Applications folder(it may need to be put into the Trash temporarily), and then see if you can download it for free from its individual product page.
3. Click here and contact Apple.
(116137)

I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

On my laptop when I open up a pdf file and do a search for a particular
text phrase it prompts me to run a character analysis. Whereas on my mac
mini, when I try to engage the same process it just says it couldn't find
the phrase and doesn't even try and run a character analysis. I tried
clicking on the tool bar and the recognize text tab but nothing there seems
to do anything.
In trying to figure out the issue on my own I noticed one thing. I run a
small law firm in St. Louis and I scan in all my files to which are
subsequently emailed to my outlook account where I will save them as pdf's
to their respective folders. On my laptop when I open up an email from my
scanner I see the image of a acrobat document next to the attachment
paperclip symbol. However, when I open up the same email on my mac mini I
notice instead of an acrobat file image it shows a Preview file image (the
program used to open up pdf's before I installed acrobat).
Hope this helps!
Sincerely,
Jonathan McAllister

Unable to send or receive texts, talk to text not working, unable to talk to Siri. Two days now. Is it the phone? Is it the network? Do I really have to go dig out my old Blackberry to send a text after buying a $400 phone?

Similar Messages

Maybe you are looking for