Unable to send pitures when texting

Can't send pictures when texting.......Went to settings/messages, but no MMS to turn ON....????
Please HELP!

Verify with your carrier you have MMS enabled on your account - If so power cycle the phone - if MMS is still not in the Settings>Messages page then you will want to try going to Settings>General>Reset>reset all settings- check again.
If still not there Try Performing a restore via iTunes on your computer.

Similar Messages

  • Unable to send or receive text messages

    I just activated my Droid Razr and I'm unable to send or receive text messages.  Sending and receiving phone calls and emails works fine.  Any ideas?

        Thanks to the community for your contributions.
    Hello Tim952,
    I use text messages on a daily basis to keep in touch with friends and family so I understand how important it is to get this resolved. How long have you had this issue? What zip code are you located in? Do you receive an error when sending a message? Are you using a third party messaging application? If so, please remove and retry with the stock messaging application. Please share additional details so I can better assist.
    DaisyP_VZWSupport
    Follow us on Twitter @VZWSupport

  • Unable to send or recieve text messages

    For some reason I am unable to send or recieve text messages, can anyone help me with this situation

    Hi ,
    Is your Orange phone still working? The EE phone will have a temporary number until yours transfers over.
    When this has transfered you will need to do the below:
    Update your number
    Go to Settings > Phone > My Number.
    Replace the temporary number you find there with your own number - use +44 instead of the first 0.
    Then tap Save.
    Reset iMessage settings
    Your iMessage settings won't reset themselves during porting - the temporary number will still be in your new iPhone.
    To input your old number into your new iPhone:
    Go to Settings
    Tap on Messages
    Tap iMessage ON
    Scroll down to Send & Receive number
    Replace the temporary number with your old number
    Then tap Save.
    That's it, you're all ready for action. with your number.
     

  • Unable to send or receive texts, talk to text not working, unable to talk to Siri. Two days now. Is it the phone? Is it the network? Do I really have to go dig out my old Blackberry to send a text after buying a $400 phone?

    For the past couple days I have been unable to send or receive texts, can't use voice to text, can't talk to Siri.
    Three reasons I have the phone.
    $400 for a new paperweight. Just what I needed for Xmas!

        We certainly don't want to lose you as a customer megarga! Let's partner together and get your wireless concerns addressed. When you received the iPhone, did you set it up as new or restored from a previously owned iPhone/Apple ID? What model iPhone do you have? If you have restored from a previous iPhone then how much available device memory do you have? As you share the details then we can customize a solution for you.
    Thank you…
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue.  I am also unable to send SMS and text messages without them eithe

    Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue.  I am also unable to send SMS and text messages without them either failing or not sending at all.  Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?

    Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
    My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced.

  • Unable to send or receive texts and calls

    For nearly two weeks I've been unable to send or receive texts and calls I have tried resetting my phone deleting existing call / text convos and taking the sim out of my phone 4g internet still works but nothing else I'm using an iPhone 6. Why can't I send or receive anything?

    Hi ,
    Very sorry this is happening,
    Have you tried the SIM in a different phone?
    Also have you tried a network reset?
    Note: Resetting the network settings will clear all WiFi passwords and refresh device network connections.
    From the home screen, tap Settings.
    Scroll down to, then tap General.
    Scroll down to, then tap Reset.
    Tap Reset Network Settings.
    Tap Reset Network Settings to confirm.
    Note: If a security code is enabled, this will need to be entered between steps 4 and 5.
    Thanks.

  • Unable to send or receive text messages after updating iOS to 7.0.2

    I am unable to send or receive text messages aftering updating to iOS 7.02. I have an iPhone 4S. I have run all the suggested troubleshooting still can't text. I have been to my carrier, AT&T, there is no issue with my account. AT&T suggested resetting the phone to factory defaults (thereby wiping it clean). I am trying to avoid that as I had issues with transferring data & contacts before. Any one have a work around?

    Try this iMessage workaround
    Look for a fix by Apple by the end of the week.....

  • Unable to send pictures in text messaging

    I'm unable to send pictures in text messaging ! My carrier is Consumercellular . I'm able to send pictures to my other iphone but not to my other phone or anyone else out of network!  My other phone has no problem with sending to others , just the iphone!?

    Consumer Cellular will offer iphone (4s, 5c and 5s again) on December 13, 2013
    We have a 4s, 5 and 5s with iOS 7.04 and Consumer Cellular  now has APN + a carrier update that will offer MMS = picture messaging

  • IPhone 4 IOS 7 - unable to send photos via text

    I have been unable to send photos via text since updating to IOS7.  All of my settings are up to date and this problem occurs on wifi, 3G and makes no difference if I send the photo via message first or from my camera.  I have read all the troubleshooting guides and nothing has provided a permanent solution.  Resetting the network seems to work for a limited time before the photos come up with the same "not delivered" icon again. 
    Does anyone know why the reset would work and then stop working if I haven't switched my phone off?
    Thanks

    You may have to backup and restore through iTunes. Have you contacted your carrier about this since this feature is carrier-provided?

  • Since the new year I have been unable to send or receive texts from someone I text daily...he does not have an iPhone

    Since the new year I have been unable to send or receive texts from someone I text daily...he does not have an iPhone

    Mail: Troubleshooting sending & receiving email messages

  • Unable to send or receive text messages after apply s/w update on Q10

    After apply software release 10.1.0.4181 (size 6mb) on my Q10, I can no longer send or receive text messages, pls help. At first I thought the text messages were only collapsed, but I am unable to send, receive or open any previous chat. I have rebooted the device multiple times, including removing the battery. When trying to do a text message, system seems stuck on the last message received yesterday, and am unable to open this chat session, reply, compose. I cannot compose for any contact, nor able to receive any text messages. PLs help !!
    Solved!
    Go to Solution.

    I removed my battery again, this time left out for 5 minutes. SMS is now working again. (previously approx 2 min)
    However, the problem I was experincing, I have had before, where I cannot send an sms message. I believe I may have hit a hot key and basically does not allow you to send a message. Typically I reboot at this point and sms works again. I will try your new os option after I verify all is working properly again.  Thank you for your help.

  • Unable to send or receive text mesages

    I just changed my plan last week to include texting. however I am unable to send or receive any messages When I send  It reports message failed

    ronb65
    I'd be lost without my text messaging! Let's get this up and running for you. Were you able to text before the plan change? Are there any other Verizon Wireless customers having the same issue? Also, what type of device do you have?
    ChristinaM_VZW
    Follow us on TWITTER @VZWSupport
    If my response answered your question please click the _Correct Answer_ button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Unable to send or receive text on iphone 5s

    Unable to send a text or receive one on my iphone 5s

    SMS/MMS, which are true text messages (not iMessage) are a carrier function. You need to contact the carrier and have them check your account to see if you have a SMS/MMS plan on your account.

  • TS1398 I am unable to send email when connected to wifi

    HI
    I am unable to send a email when connected to any WI FI.  Have to discounnect from wi fi and then the message will send.
    On Bell in Canada and have set up correct SMTP settings as per bell
    Any help.

    It looks like Bell will only let the iPhone send emails over their cell network, see this thread -> Sending email issues
    You might be able to get some aditional info here -> Bell Customer Support Centre

  • Repeated "Call Failed" and unable to send or receive Texts or VMs

    Please Help Me:
    I have a beloved iPhone 3G and it has been no problem for the year and a half that I have owned it. Until last week...
    All of a sudden I am periodically getting repeated "Call Failed" screens when I attempt to make an outgoing call. Not once or twice but for hours at a time, I cannot call out or receive calls-in, nor can I send or receive text messages.
    Sometimes it will click-back-in (whatever that means) and I will suddenly get three voice messages and texts from my wife saying, "Where are you and why is your phone going straight to VM???"
    What did I do to troubleshoot?
    1. When I power off and power back on my phone it sometimes starts to work again.
    2. If I do a Home Button plus Power Off it works, until it "clicks off" again.
    3. I called AT&T support, they checked for network outages and there are none.
    4. I took the sim card out and blew-in it (a la Nintendo-HA!)
    5. I updated it. I hadn’t updated it since March. This took a while, because I kept getting an error (2003) message. But eventually, I completely UPDATED IT and RESTORED THE PHONE. I now have 4.0.2 on my iPhone and iTunes 9.2.1.
    6. It looked like the update/restore worked but then it started happening again.
    7. The problem is not local, i.e. it happens to me not in just one area but on the road, at home, at my office, out of my home area, etc.
    I’d prefer to only have to buy a new cell phone every two or two and a half years, rather than on an annual basis. I do not have an extended warranty or AppleCare.
    Does anyone know of any other hard-fix for this.
    I’m willing to take a gamble, because I know the next step is to go to AT&T and they’re just going to tell me I need a new phone (likely the same for an Apple Store as well).
    The rest of the phone is working fine. Even when getting Call Failed, I still can use the Internet and other applications.
    My phone connects properly to my PC (Windows XP) and my bars and network connection appear to be accurate, meaning that I’m not getting zero bars when the Call Failed screen appears.
    Any help, insight, etc. would be greatly appreciated.
    Thank you.

    Alright, it's fixed:
    Switching Airplane Mode and/or "Show My Caller ID" OFF and ON or vice versa did work momentarily, particularly the Airplane Mode.
    HOWEVER, I read someone's post on another website about disabling 3G!
    Just recently my area received 3G (I know Pennsyltucky). So maybe the turnover had some effect on my phone. (AT&T did not admit to that when I called but...)
    Anyways, go to Settings > General > Network > switch "Enable 3G" to OFF
    It has worked for 24 hours, so keeping my fingers crossed.
    Please note that this may only be a fix for the older 3G iPhones (I bought mine new right when the 3GS was released). Plus, our area just received 3G networking.
    Hope this helps someone else.

Maybe you are looking for

  • Erro ao liberar request

    Boa tarde Srs., Estou tentando liberar uma request em um ambiente de teste mas estou recebendo a seguinte mensagem: -Error in pre-export methods for request DEVK900008 Message no. PU238 -Diagnosis There was an error during export pre-processing. The

  • JList - drag and drop

    Hi, I'm struggling with getting my program outfitted with a drag and drop function in and between a few JList components. (I'm using NetBeans IDE 6.7) I have four JLists of which only one I want to enabled drag and drop rearrangement of the strings.

  • How to disable moving Columns in JTable

    Hi, How can I make sure that the columns in my JTable cannot be moved? Any ideas? thanks

  • How to make plant maintenence genarated Purchase requistions un editable?

    hi guys, we had a scenario of plant maintenance  module generated purchase requisitions for external procurement of items/services. suppose these PR`s are subjected release strategy these are following the standard process. once the PR is release by

  • Creating plug in for LMS

    Hi, 1.Can we write plug-ins/ add on to LMS components? If yes please let me know how? any links would be helpful. 2.Does LMS support discovery based on LLDP? If no, can we write our own plugin to take care of device discovery? Regards, ram