Unable to send & recive data from Bluetooth

Unfortunately I can't seem to get any files from any phone via bluetooth. I just get a file transfer error message phone with no futher explanation. I have paired them up accepted the passcodes, turned off encryption but nothing, I even sent a picture from my blackberry to an existing phone which went fine and tried to resend the file back but it just will not work.

Sending file:
You can only send media files that you added.
Before you begin: To perform this task with a paired Bluetooth® enabled device, you must turn on Bluetooth technology.
On the Home screen, click the Media icon.
Click a media type.
If necessary, click a category.
Highlight a media file.
Press the Menu key.
Perform one of the following actions:
To send a picture file, click Send or Share. Click a message type.
To send an audio or video file, click the send option for a message type.
Receiving file:
Before you begin: To perform this task, Bluetooth® technology must be turned on and your BlackBerry® device must be paired with a Bluetoothenabled device.
On the Home screen, click the Media icon.
Click a media type.
Press the Menu key.
Click Receive Using Bluetooth.
Send a media file from the paired Bluetooth enabled device.
If necessary, click Yes.
Click Save.
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Similar Messages

Unable to send the data entered in sap portal

Hi
All
i am trying to configure and test Leave Request from portal. When, we create the leave request and submit for the first time, it is giving the error/message Unable to send the data entered However, if do a submit for the second time, the same leave request, it sends the leave request.
Please share your valuable thoughts or solutions.Thanks in advance.
Tanks
Rafi Shaik

Hi Rafi,
We are also facing similar kind of issue.
When i select type of leave as annual it is giving an error message as
" Parameter missing in call of method BUILD_ACTOR_SELECT_CLAUSE in class CA_PT_REQ_ACTOR "
But when i select some other leave type and click review it is working fine, again if i click on previous step and change the leave type to annual it is working fine without giving any error message.
Please let us know how you have solved your issue?
Thanks.
-Suresh

'unable to send print data' on HP Laserjet 1536dnf MFP

Hi there,
I'm running an iMac with OSX 10.6.8. Via an USB cable I have attached a HP Laserjet 1536dnf MFP to the iMac.
I also use this printer to print via wifi (i.e. through the iMac) with my MacBook Pro (with OSX 10.7.3).
Suddenly today the printer stopped working via my MacBook Pro. I get an error message: 'unable to send print data'.
I have checked my antivirus etc., but that does not appear to be the problem. I have also updated the firmware of the printer, without success.
Can somebody help me out? Is the OS difference the problem? But until today that hasn't been a problem.
Thank you very much! Regards, Luc.

Hi jemenake
I understand you lost connection with the network for the Laserjet 1536 through ethernet connection.
Disconnect the routers power cable, wait 10 seconds, then reconnect the power cable. Wait till it's ready. The router might not be finding the printer on the network.
If this doesn't resolve the issue continue to the next steps.
Print a configuration report from the LaserJet 1536dnf.
Press the Setup button, (the one with the wrench on it)
reports, press OK, Config Report, press OK.
Check to see if the ip address is valid.
If you have a valid ip address then delete and add the printer on the mac, the driver might have become corrupted.
Delete printer on mac.
Click on the Apple, click System & Preferences,then click the Print & Scan icon (on some systems this may be displayed as Print & Fax),highlight your printer name and click the button on the bottom left corner of the screen.
Add printer on the mac.
Click on the Apple, click System & Preferences, and then click the Print & Scan icon (on some systems this may be displayed as Print & Fax),click add a printer, then select the printer from the list, make sure the printer listed beside use or print: shows proper printer name and not airprint, (airprint is a preinstalled apple driver with basic funtionality if on 10.8) add it in.
If the ip address is not valid please let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I am unable to send e-mails from my Outlook

Everything was working ok, for ages. Suddenly I am unable o send e-mails from my Outlook.
"The message I get is: 'Unable to send the message. Please verify the e-mail Address in your account properties'.
When I 'Send a Test Message' from Outlook, Tools, Accounts. All actions are completed besides sending a test message when I also get the instruction.

Hi
If it happened suddenly so possibly it was a virus?
I dont know why you are not able to send the e-mails.
I think you should check the email account properties. Check the data of you POP3 and SMTP server.
Im not a outlook expert but this options should be found somewhere in the email account properties.
The last possibility would be deleting of the email account under outlook and then a new creation of the new account.

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

E72- Unable to send e-mail from work mailbox

I am unable to send e-mails from my work e-mail through my E72 although it receives perfectly. I have been in contact with Nokia via e-mail for the last 2 weeks and they have sent several suggestions to solve the issue but nothing is working. I have set-up my work e-mail on my husbands Blackberry with the same settings and can receive and send perfectly. From that I conclude there is no issue with the settings I have or my work e-mail but with
Nokia!! The latest 'help' I have received was to download a patch but I have no idea how to do this and get it onto my phone. So far Nokia have not replied to me.
Any suggestions how to get this to work would be greatly appreciated

If you're using a much older firmware, updating the phone would be a good idea. Find the Software Updates section of nokia.com and type your phone model. If you can't do an over-the-air update, download and install either the OVI Suite or the standalone Software Updater. This may hard reset the phone, so back up anything important with OVI Suite first.
Ignoring firmware for now, IMAP and URL's are like apples and oranges. If you work for a small company, the server may always be called " mail.mycompany.com", but IMAP will never use an HTTP or HTTPS prefix. URL's are typically associated with Microsoft Exchange servers. Within the email program, check Options -> Settings -> Mailbox settings -> Mailbox settings -> Advanced mailbox settings. Are "Outgoing email settings" set to something like
User authentication: Same as for incoming
Outgoing mail server: <compare to the setting for the Incoming server name; in a small company this will likely be the same>
Since you're getting far enough for the mail sever to reject your connection, the other settings should be fine as-is.
It does look like an authentication issue, so I'd say you're either hitting the wrong server or there's a bad username or password in there somewhere. If the Blackberry works with an IMAP connection, then you should be using the same server name(s), and user/password.
If all else fails, you can always try removing and readding the mailbox completely. Choose Menu -> Applications -> Email -> Settings -> <highlight your work account> -> Options -> Remove mailbox. And then set it up from scratch. I hope that helps a little!

ITunes was unable to load provider data from Sync Services

Hello,
My itunes says : "iTunes was unable to load provider data from Sync Services", when i connect my iphones.
My iphones sync fine on my other computer.
This problem occurred when formatting my pc from work.
And this problem prevents me only sync tab "info" (contacts, calendar and Outlook). This does not prevent me to synchronize other tabs.
I already tried to reinstall itunes, and the diagnostic option.
Thanks in advance.

This problem has been ongoing since 9.2 came out ... i.e. quite some time.
I uninstalled and then removed all traces off Apple applications, then reinstalled back to the prior version and ran with no problems.
When I upgraded to V4 iPhone software I had to upgrade again and ran into the same problem.
Upgrading from Outlook 2000 to Outlook 2003 was of no benefit.
I have purchased Sync2, set up a gmail account and sync over wireless from Outlook to gamil, then from gamil to iPhone.
This only does calendar and contacts (haven't found a solution for notes) but waiting for Apple to sort this will probably see you old and gray.
Good luck.

ITunes 10.5.3, Unable to Load Class Data from Sync Services, Crashes Repeatedly

Ever since iTunes 10.5.3 on my Windows 7 x64 box, I've been having serious problems keeping iTunes running:
1) Any time I connect my iPhone or iPad, or any time they attempt to sync over WiFi, I get the 'Unable to load class data from sync services' error. It's worth mention that the iPhone or iPad do actually then proceed to sync correctly, and all media / data is synchronized successfully, as far as I've been able to tell. I've reset sync history, restored the iPhone and iPad, manually moved the SyncServices directory, set both the iPhone and iPad up as new, completely uninstalled iTunes and the mobile device software, re-installed, and *nothing* I do fixes this issue or even seems to impact it. Uninstalling iTunes 10.5.3 and reinstalling iTunes 10.5.2 resolves this error.
2) iTunes 10.5.3 has serious crashing problems on my machine, though I've searched through forums and found a lot of other people with the problem. In my case, sporadically as iTunes access the iTunes store (for example, I can always make it happen by subscribing to the Diggnation podcast and telling it to refresh the podcast), I get a full application crash which generates the following event in the event log:
Faulting application name: iTunes.exe, version: 10.5.3.3, time stamp: 0x4f14cc3d
Faulting module name: KERNELBASE.dll, version: 6.1.7601.17651, time stamp: 0x4e211319
Exception code: 0x80000003
Fault offset: 0x0001280c
Faulting process id: 0x564
Faulting application start time: 0x01cce78789dc009a
Faulting application path: D:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: ecc77400-537a-11e1-b809-00248c196007
Again, uninstalling iTunes 10.5.3 and re-installing iTunes 10.5.2 fixes this issue as well, but I really shouldn't have to do that. Is there any actual solution to these problems other than dowgrading to an older version?
Yes, I'm running current malware protection (and my system is clean) and yes, I've already checked any other obvious culprits to make sure I don't just have a corrupt library or file somewhere that's causing it. My Windows 7 install is completely up to date from a Windows Update perspective and also from a driver perspective (even including the motherboard and chipset drivers). I made sure to do a system file integrity check (sfc /scannow) and it confirmed my install of Windows isn't suspect, but beyond all that I was able to reproduce these failures on a completely separate machine running Windows 7 x64, without any of my media library or data on it -- iTunes 10.5.3 just seems to be bad news on Windows 7 x64 for me, even though I know there are definitely people are using it successfully. I don't get any other application crashes for any other applications, and I've never had an issue like this with any previous version of iTunes...
Last but not least, in case it matters, I'm running iOS 5.0.1 on both the iPhone4 and the iPad2. The iPhone4 is the GSM AT&T model and the iPad2 is the CDMA Verizon model.

OK, I've given up. Uninstalled iTunes 10.5.3 permanently. It's a shame, 10.5.2 works perfectly but 10.5.3 is a complete and total cluster for me.
Anyone with the same problems who hasn't done this already, just uninstall iTunes and the Apple Mobile Device Service in your Add/Remove Programs, then re-install iTunes 10.5.2. You won't lose your library or any settings or apps, it will just go back to working again.
I wish Apple would acknowledge this so that I'd at least know it would be fixed in the future.

Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it fr

Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it from system registry. My system is Windows 7 64bit.

UPDATE: The true error is : '
"itunes was unable to load data class information from sync services"
Any of the topics didnt work.
Sync on my wife's laptop works.

Itunes was unable to load provider data from sync services. Reconnect or try later

Hi everyone
This issue has got me stumped.
I have a Dell Vostro desktop computer with Windows 7 SP1 64 bit edition.
I used to be able to sync now I cannot bakup or sync.
The device is an iphone 4s with the latest software IOS 5.1.
Itunes is version 10.6.0.40, the latest.
To try to fix this problem I removed itunes/quick time completely. Removed Bonjour, Apple Application Support, Apple Mobile Device Support, Apple Software Update,
Deleted the itunes and quick time folders, the common file folders and files, deleted anything related to able under appdata local and roaming, removed apple folder under program data, scanned through registry and removed all apple entries.
Then I rebooted the computer, re-installed itunes/quicktime and have the same error appear again.
I have gone through this process at least 5 times , but still keep getting the same error, cannot go past it.
I found a solution on this forum but it only applies to MACOS, could not find anything suitable for windows 7 environment.
Also searche the web high and low and tried several different advice from people.
This has to be a bug with Itunes! I would like to hear from Apple developers and programmers why I have to suffer so much to sync my device.
As a last resort I am planning to rebuild windows 7 from scratch but is is a big job.
Tried also to disable firewall, antivirus, check the apple windows services are running, nothing works to get me past this error.
Please help someone!
Thanks and regards
Alfred

Did you have a look ath this (rather) long thread about it?
https://discussions.apple.com/message/17214161#17214161 , for example:
danielfromkongsvinger
Re: Unable to load provider data from Sync Services
16.12.2011 20:21 (in response to wisniak)
"I then followed a tip found in PCWorld and performed the following:
1. Make sure iTunes isn't running.
2. Click Start, type regedit, then press Enter.
3. Navigate to this Registry location: HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Layers
4. Look in the main pane for a key that refers to iTunes. If you find one, delete it, then exit the Registry.
5. Start iTunes. The offending message should be gone!"
This actually worked for me! I have struggeled with this error for years, and now it's gone. Thanks!

Problem: Unable to retrieve workflow data from MDM repository

This is a new MDM installations scenario for version 5.5 SP05 (5.5.40.83).
After installing MS Visio, finding problems connecting it with the MDM Data Manager. After doing MDM workflow installations, able to initiate the MS Visio Workflow from MDM Data Manager and can see the Pane-MS Visio Workflow Stencil but not the able to see the Pane-MS Visio Workflow Stencil Details that appears below the Pane-MS Visio Workflow Stencil. Secondly geting a pop-up with the error message as - 'Unable to retrieve workflow data from MDM repository.'
I have added a parameter Mail Server=MailServerIPAddess (the existing IP addr), but it hasn't helped.
Can any one please help me in this !

Hi
As Felix mentioned, it might be a version compatibility problem.
You have also mentioned that mail server is not working for that do this
Mailserver = SMTP server.company.com ( ex. Mail.company(xxxxx).com)
MDM workflow notify task is working after rebooting the Machine. So the rule is after making changes to MDS.ini file reboot the machine ,to observe the consequence of configurable changes.
If u need anything this let me know.
Regards
Hari

ITunes was unable to load provider data from Sync Services. Reconnect or try again later

i just had this message for the fist time when trying to sync my iphone 4: "iTunes was unable to load provider data from Sync Services. Reconnect or try again later"
what i did is that:
- i unplugged my iphone 4
- clicked on "edit" in itunes, "Preferences", "devices", "reset synck history"
- Uninstalled itunes
- restarted the lap top
- reinstalled itunes
then i tired and the iphone synced fine. i tried it a few times and it was fine.
but i have 2 questions:
1- could this be cause by excessive syncing, since i do sync my phone almost twice a week.
2- is what i did good enough for a solution or do i need to rename folders and resort to the other solutions provided?

OK
Here's what I did:
1. Copy all of the contents in C:\Program Files\Common Files\Apple\Apple Application Support to C:\Program Files\Common Files\Apple\Mobile Device Support folder, overwriting anything it if asked.
2. Rright-click on the Computer icon on your desktop (or in the start menu) and select Properties. Click on Advanced System Settings. Then clik on Environment Variables. If you don't have a user variable called PATH, click New... and add it, or select it and click Edit...
Now, add to the beginning of the user PATH the following two directories:
c:\program files\commmon files\apple\Apple Application Support
c:\program files\commmon files\apple\Mobile Device Support
Be sure to put a semi-colon (;) between the two directories.
Click OK three times to save your settings.
Step #2 might require a reboot.
After these 2 steps sync works again (touch wood).
Seems that sometimes there's an additional possibility (which I didn't perform):
If you are still having problems after following these steps, it's possible another application uses one of the same DLLs as iTunes (but a different version) and Windows is finding it in the PATH before the Apple file paths added above. You can check this by opening a DOS command prompt window and executing the following commands:
where libxml2.dll
where sqlite3.dll
where libtidy.dll
Examine the pathnames listed by these commands. If any paths are listed before the ...\Common Files\Apple\... paths, you'll want to remove those paths from the PATH environment variable.

TS1717 I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

In the course of your troubleshooting to date, have you also worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

Itunes is unable to load provider data from sync services

When l plug my iphone4 into my laptop ,to try and take some playlists off the phone ,l get the message itunes is unable to load provider data from sync services ,, what am l doing wrong ,,l want to sort this problem out ,,thank you Pete ,

In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

ITunes is unable to load provider date from synch service

Hi can anyone help me with this problem,
I have uninstalled ITunes and reinstalled and still comes up with "ITunes is unable to load provider date from synch service" Hopefully some one can help me to get my iphone to synch.
Michael

Read here:
http://support.apple.com/kb/TS2690

Unable to send & recive data from Bluetooth

Similar Messages

Maybe you are looking for