Unable to send RequestUnlockToken command to device with Apple Configurator

I've always used Apple configurator to unlock my 1:1 iPads if a student forgot his or her passcode. Recently I've been unable to perform this task. I receive the following error information when I hit the Refresh button:
Unable to send RequestUnlockToken command to device.
Description                                                      Code     Domain
Device returned unexpected status "NotNow".      5           com.apple.configurator.error
Any help would greatly be appreciated in solving this issue.
My iPad are running iOS 7.0 or better
Apple Configurator v1.5

I've always used Apple configurator to unlock my 1:1 iPads if a student forgot his or her passcode. Recently I've been unable to perform this task. I receive the following error information when I hit the Refresh button:
Unable to send RequestUnlockToken command to device.
Description                                                      Code     Domain
Device returned unexpected status "NotNow".      5           com.apple.configurator.error
Any help would greatly be appreciated in solving this issue.
My iPad are running iOS 7.0 or better
Apple Configurator v1.5

Similar Messages

  • I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1.  I am unable to rename/number devices. How can I get rid of this error message.

    I am unable to update devices with Apple Configurator because of this message - unable to send ClearPasscode command to device - I am running Configurator 1.5 and ios 7.1.1.  I am unable to rename/number devices. How can I get rid of this error message.

    I've just seen this message for the first time and it's showing on 10 devices.
    What I really love about Apple Configurator is the copious amount of context driven help offered to you.
    "Unable to send ClearPasscode command to device.
    The device was disconnected.
    Check the USB connection to the device."

  • I'm getting a error message when using Apple Configurator "unable to send ClearPasscode command to device"

    I'm getting a error message when using Apple Configurator "unable to send ClearPasscode command to device"

    Yes, that is correct.  My spreadsheet has the following information in those cells if you want to compare yours on Monday:
    Product Type
    Application
    |
    AdamId:
    <and a 9 digit number>
    I ended up bringing the Macbook Pro home with me after struggling with it for a half hour at the end of a long day. I called and within 5 minutes the problem was corrected.  The technician said they were getting calls all day. 

  • Preparing an iOS device with Apple Configurator and Profiles

    Hi,
    I am using Apple configurator 1.5 to prepare iPods with an updated iOS, backup and profile. Up until recently, I was able to install the the updates and the backup but the profile is not being send to the device. I have to stop the "prepare" setup and manually add the profile to each device.

    I recommend posting in the iPhone or iPad for the Enterprise forums

  • [nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authentic

    Hi,
    We have configured SMTP server details in OBIEE 11g OEM to send mail from Agent. When we run Agents, we are getting the error
    [nQSError:75006] Unable to send MAIL Command.5.7.1 Client was not authenticated
    Did anyone face the issue? In that Case, Please give some inputs on that.

    Hi Satya,
    I would like to few more which I have done today.
    I wanted to test telnet SMTP on the OBIEE Installed Machine and I was able to succeed also. Please find below what I did
    C:\>telnet mail.smtp.com 25
    220 internal.mail.smtp.com Microsoft ESMTP MAIL Service Readt at Fri,
    25 May 2012 00:51:00 -0400
    ehlo
    250-internal.mail.smtp.com Hello [162.44.76.47]
    250-SIZE
    250-PIPELINING
    250-DSN
    250-ENHANCEDSTATUSCODES
    250-X-ANONYMOUSTLS
    250-AUTH NTLM LOGIN
    250-X-EXPS GSSAPI NILM
    250-8BITMIME
    250-BINARYMIME
    250-CHUNKING
    250-XEXCH50
    250 XRDST
    AUTH LOGIN
    334 VXN1cm5hbWU6
    Uy5SY-------------- Mail User Name
    334 UGFzc3dvcmWU6
    U2hfpd------------- Mail Password
    235 2.7.0 Authentication Successful
    mail from:[email protected]
    250 2.1.0 Sender OK
    rcpt to:[email protected]
    250 2.1.5 Recipient OK
    data
    354 start mail input; end with <CRLF>.<CRLF>
    This is a Test Mail
    250 2.6.0 <internal.mail.smtp.com>
    Queue Mail for Delivery
    Mail Received in Inbox
    So, My Question is that, I am able to receive the Mail if I directly access SMTP via Telnet then , Why it is not working in OBIEE and it throws error
    [nQSError:75006] Failed to send MAIL Command.5.7.1 Client was not authenticated
    Please help on resolving the issue?

  • HT4061 is it possible for someone to register a device with apple if i have already registerd it

    is it possible for someone to register a device with apple if i have already registerd it

    Thanks King_Penguin .... yes my device is regesitred on my profile ............... now it has been stollen i just wanted to know if someboday else tries to register by reseting to factory settings will apple allow him to register ..... or can apple intimate me ?

  • Device Enrollment Manager and Bulk Enrollment with Apple Configurator

    Hello,
    Regarding the Device Enrollment Manager and Bulk Enrollment with Apple Configurator features released with Microsoft Intune in november/december 2014:
    When will these features be available for the Intune hybrid parity? (Intune + SCCM 2012 R2)
    We would really like to utilize the Device Enrollment Manager user account for shared device scenarios and the bulk enrollment feature to deploy multiple IOS devices to classroom iPads but we are "on hold" for now until these features will be released
    for the hybrid parity version of Intune.
    https://technet.microsoft.com/nb-no/library/dn764961.aspx
    https://technet.microsoft.com/nb-no/library/dn764958.aspx

    There is no information available about when new features will be released. Probably this will be available in either a future CU, or vNext. Looking at the possible impact of that change, I would guess vNext.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Prevent App Install with Supervised Devices in Apple Configurator

    We don't want our students installing Apps on the iPads in our district. So we created a Supervised Profile which takes away the App Store.
    BUT, this also prevents us using Apple Configurator to update or install new Apps.
    Therefore, we need to:
    Remove Supervised Profile > Apply
    Update / Install new Apps > Apply
    Install Supervised Profile > Apply
    This makes for a lot of wasted time. You would think the Apple Configurator would be able to bypass the Supervision Profile preventing the use of the App Store.
    Apple needs to make this possible in the next Apple Configurator update (PLEASE).

    We had some students who updated our shared iPad cart iPads to iOS 7. It currently isn't working well with Apple Configurator for us. I used this article and the following website to download iOS 6.1.3 to restore these iPads to a functioning state. Our MDM is currently not updated to work with iOS 7 and I am having activation problems with Apple Configurator so it looks like we will be sticking with 6.1.3 until things get updated.
    http://support.apple.com/kb/HT5782
    http://www.ipswdownloader.com

  • Problems with Apple Configurator

    I've been having trouble with Apple Configurator lately. For reference, the devices are not being supervised. They are just being restored from a backup file with four profiles, and two free applications. The backup file is fairly large - coming in at 12.9GB. Using a Mac Mini with around 150GB of free HD space. I'm using a Bretford tray so I usually try to plug in 10 devices at once. This has worked in the past and have only recently run into problems since the update to Configurator 1.4.2 and/or iOS7. So, I'm able to to run Configurator with 10 devices plugged in (I've since started only plugging in 6) and no matter what I try I cannot get more than 4 devices to successfully complete. And actually about half the time less than 4 actually complete successfully. The error I'm getting is Code 4 and the description just says "unable to restore backup." It takes about an 45 minutes to complete one device and about double that to complete 10. So getting 10 done at once is a huge time saver. When I'm only getting 4 devices completed and many time less than that at almost an hour, it is absolutely maddening. I've tried every combination of restarting and reinstalling Apple Config and still the problem exists. 
    I have a constant stockpile of iPads, Minis, and iTouches coming in so it would be extremely greatful if anyone had any tips or advice.
    Additional questions regaurding Apple Config.
    1. Is there any way to install multiple profiles on multiple devices on the newest version (1.4.2)? It seems like the new version only allows you to install 1 profile on multiple devices or multiple profiles on 1 device.
    2. Everytime a backup fails, Apple Config saves that backup in the MobileSync folder buried in the Containers folder. Each of there backups is almost 13GBs, so I'm having to constantly delete them to conserve HD space inorder to run so many devices at the same time. Is there anyway to prevent this from happening or auto delete failed backup restores?
    I know this is very long winded but I wanted to get as much on my info out there as I could. Anyway, thanks for any help that anyone can provide!

    I recommend posting in the iPhone or iPad for the Enterprise forums

  • Setting/keeping a static IP on iPad with Apple Configurator?

    Hey there
    We are just getting some iPads into our school and I have been configuring them with Apple Configurator which has gone pretty well so far.
    The problem I am having is that each of our iPads has to be assigned a Static IP address (for web filtering reasons) and each time I plug the iPad back in for a refresh or for a new install of an app the iPad switches back to DHCP and I have to manually type the static IP back in.
    This is rapidly become a pain the more iPads we get in, is there a way to set Configurator to either leave the IP settings alone or to set it so that it pre-fills the static IP settings?  I've looked through all the profile options and nothing jumps out!
    Any help would be greatly appreciated
    Neal

    Configuration profiles do not allow you to apply a static IP address to a device.
    Instead, it would be highly recommended to configure static IP addressing within the DHCP server itself. This would accomplish what you want without worrying about which proifle goes on what device, etc. Configurator can also export the MAC addresses to make life easier in setting this up.
    Right click the 'All Devices' in the Supervise tab, click Export Info > Device Information > WiFi MAC Address.

  • How do I distribute Pages with Apple Configurator?

    In my school we have 15 iPads and I want to install Pages, Keynote, Numbers onto them with Apple Configurator. When viewing the ipad apps in the App Store on my iMac, it doesn't show them as free, but it does if I view them on the app store on an iPad. I purchased the free apps on an iPad so it linked them to my account, and I was then able to download it to my iMac. However, when I try and distribute them using Apple Configurator, it's asking for redemption codes. I can install them fine individually on each iPad, but they're around 1GB in total to download, I'd rather only have to do this once and send them to all iPads rather than downloading it 15 times.
    Thanks.

    I came across this problem again the other day when I download an app that was free for a limited time.
    I've started using Apple Configurator purely for iOS updates and installing a profile containing Wi-Fi settings etc. I have been using iTunes to manage apps which is a lot more powerful. After downloading the apps thtrough iTunes onto my Mac, I can then distribute all of the apps to the iPads via USB (the iPad's are stored in a Griffin small cabinet that acts as as USB hub) and I can manage them all at once. It takes a while to transfer, but its quicker than downloading 5+GB on each iPad, and iTunes allows you to manage app folders as well.

  • New issues setting up iOS 7 devices in Apple Configurator?

    I have 1,200 iPad 4's that all game with iOS 6... Now configurator wants to automatically upgrade the iOS to 7 for any device I plug in...
    The issues:
    Will not restore a backup with a Wifi network already joined and connected.
    Lock-Screen wallpaper is not scaled to proper size.
    Cannot bypass setup assistant. It forces you to go through it.
    Does anyone else have these issues or a remedy for these issues? Major headaches!!!

    We had some students who updated our shared iPad cart iPads to iOS 7. It currently isn't working well with Apple Configurator for us. I used this article and the following website to download iOS 6.1.3 to restore these iPads to a functioning state. Our MDM is currently not updated to work with iOS 7 and I am having activation problems with Apple Configurator so it looks like we will be sticking with 6.1.3 until things get updated.
    http://support.apple.com/kb/HT5782
    http://www.ipswdownloader.com

  • How can I import photos from iPod that is supervised with Apple Configurator?

    I have configured a set of iPod Touches (and iPads) with Apple Configurator. User can take photos. But when the iPods are attached to a PC or Mac (including the Mac they were configured on), no pictures are visible or downloadable. The photos are visible in the Photos app on the iPod. What's happening?

    Anthony,
    I have found a workaround that just worked for me with iPads,
    Connect the iPad to the computer that supervises it, take screen shots (home key and off key pressed together) of the photos as they are displayed in Photos on your iPad and then they will be seen when you launch iPhoto on the host computer.
    It takes some time, but may be worth it, I just took screen shots of about 70 photos and they are now in iPhoto so I can export them now and use them.
    It took me 15 minutes.
    Hope this helps, Darryl

  • Problems with Apple Configurator and app lock.

    Hello Folks!
    I'm using a bunch of iPod Touch of the 4th generation (iOS 6). I locked them in an app with apple configurator 1.1.2. From time to time I get a message: The guided access is not available any more, contact administrator.
    Reconnecting to the maintance laptop solves the problem.
    How can I prevent this?
    Thanks
    Nils

    I recommend posting in the iPhone or iPad for the Enterprise forums

  • HELP - hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that?

    HELP -- hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that? although i have looked online to try and figure it out and here is the website i found is this the stuff i need to do to fix this? is this site what i need to do to fix this? http://edtechstandish.wordpress.com/what-ive-learned-about-apple-configurator-so -far/  Thanks

    Sorry but I don't know anything about this.  But you might have better luck posting this question over ing the iPad in Business and Education forum here: https://discussions.apple.com/community/ipad/ipad_in_business_and_education?view =discussions.

Maybe you are looking for