Unable to set 1st Play

Lost my main hard drive, but had a partition that had all of my software backed up on it.
Had to update the software to the newest versions to open projects I was working on.
Currently have DVD SP 4.21 running.
If I have a track that I would like to be the 1st play, I delete the default menu, but now, I am not able to control click on the track and have the menu come up that allows me to set the track for 1st play.
Been able to do this in the past, but now, nothing happens when I click on the track.
It would seem to be tied to just updating my software to the newest update.
Any ideas as to what to do?

Maybe this an obvious solution but since you updated the software have you checked your mouse settings? In system preferences, mouse settings, you can turn right click on and off...
but those settings shouldn't effect command+click

Similar Messages

Please help! I'm unable to access content on my iPod Classic while it is connected to iTunes. The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).

I'm unable to access content on my iPod Classic while it is connected to iTunes.
The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!!
I just downloaded the iTunes program.
Very confused, pleaseee help ...

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

[CUPS] Unable to set my new CUPS server with an HP printer (solved)

Hello,
I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux ... has never been very good...). But now, I'm not able, and it's about 1 hour I'm looking for a stupid error that I don't know if it's important or not ...
(all is on my Wiki : http://pix-mania.dyndns.org/mediawiki/index.php/Cups)
Here are a list of installed package : cups ghostscript gsfonts hplip
The printer (USB) :
(lsusb)
Bus 002 Device 004: ID 03f0:0004 Hewlett-Packard DeskJet 895c
(dmesg)
usb 2-2: new full speed USB device using uhci_hcd and address 4
usblp0: Disabling reads from problematic bidirectional printer
usblp0: USB Unidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004
Current configuration (only change made to original configuration) :
Listen <ip_serveur>:631
<Location />
Order allow,deny
Allow From all
</Location>
<Location /admin>
Order allow,deny
Allow From all
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow From all
</Location>
When starting cups service, all is fine : I can use a workstation to browse the Web Interface ... but printer seems to be not detected since it tells "No printers." when clicking on "Printers" tab. So, I go to "Administration" tab and, under "Printers", I click the "Find New Printers" and again, it says : "No printers found.".
Not goot ... so, like I was doing with Gentoo, I click on "Add Printer" ... then, I receive a redirection to HTTPS ... click on the link (or wait) and nothing happend (timed out): web interface is broken for HTTPS ... I really got no idea why HTTPS is not working .
After that, when updating the configuration (with vim) and restarting the service, deamon won't stop and I have to send a "kill -9" to the cupsd pid ...
I look in log and I can just see this :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
I googled for one hour, but is not more working right now ...
Some questions :
- the printer is not detected? Is it because of the ACLs errors ?
- what the hell is "ACLs" for cups ? Never seen that before ...
So, right now, I got a working HTTP but not working HTTPS, with no printer available ... very useless
This printer is working "well" with cups, since it's an old model and it's a HP printer, so is "fully?" working on Linux ...
Any idea on what to do/try now ?
EDIT: after that message, I just refresh the page (I'm using Chromium) and ... magically, HTTPS was working (after accept untrusted certificate for HTTPS?) ... Then, go back to "Find New Printers" and now, it was working. Printer has been added ... Seems to be OK, but the "Print Self Test Page" doesn't work right now because of this :
Unsupported format 'application/vnd.cups-command'!
Current log file :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:24:48 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:29:08 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:28 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:42 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:41:06 +0100] Unknown SystemGroup "sys root lpadmin" on line 13, ignoring!
E [09/Jan/2011:18:41:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:42:24 +0100] Unknown SystemGroup "lpadmin" on line 14, ignoring!
E [09/Jan/2011:18:42:24 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:45:12 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:47:32 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:49:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:59:46 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:37 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:33:37 +0100] [cups-deviced] PID 2744 (dnssd) stopped with status 1!
E [09/Jan/2011:19:33:37 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:34:09 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:34:09 +0100] [cups-deviced] PID 2763 (dnssd) stopped with status 1!
E [09/Jan/2011:19:39:51 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:39:52 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:41:23 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:44:49 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:47:16 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
E [09/Jan/2011:19:49:36 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
EDIT2: tried to print "Print Test Page" instead of the above ... and got these errors :
(web interface)
"/usr/lib/cups/backend/hp failed"
(error_log)
E [09/Jan/2011:20:08:31 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:20:08:31 +0100] [cups-deviced] PID 3126 (dnssd) stopped with status 1!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Setting locale failed.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 559: dBus Connection Error (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Please check that your locale settings:
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANGUAGE = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LC_ALL = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANG = "fr_FR.UTF-8"
D [09/Jan/2011:20:09:16 +0100] [Job 5] are supported and installed on your system.
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Falling back to the standard locale ("C").
D [09/Jan/2011:20:09:16 +0100] [Job 5] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-originating-host-name=localhost'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-originating-host-name=localhost.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-creation=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-creation=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-processing=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-processing=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'AP_D_InputSlot='
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option AP_D_InputSlot=.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
D [09/Jan/2011:20:09:16 +0100] [Job 5] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process 3154 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=5..."
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer return value: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer received signal: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: No such file or directory (2)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] KID3 exited with status 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer process finished
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Error closing renderer", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: (0)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5] Error closing renderer
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Backend returned status 4 (stop printer)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Printer stopped due to backend errors; please consult the error_log file for details.
D [09/Jan/2011:20:09:16 +0100] [Job 5] End of messages
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state=5(stopped)
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-message="/usr/lib/cups/backend/hp failed"
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-reasons=paused
E [09/Jan/2011:20:14:21 +0100] [Job 5] Stopping unresponsive job!
EDIT3: I tested the ppd from cups (and not hpijs) and got the same problem ... The latest idea was to unplug USB and plug to another USB ... and it seams to works ... Now, the test page print "fine" ...
So, I shared the printer over my LAN, and tried to print from a workstation ... it works fine now ... when looking error_log, I can see than there is no more Ghostscript error .
But I have a last question .. if somebody can answer ... When choosing a PPD file, I have the choice between 3 version :
- hpijs, 3.10.9
- hpijs, 3.10.9.11
- hpcups, 3.10.9
Don't know why onlyl the HPIJS got the ".11" and not any others ... I selected this one and here is what Cups say about the printer :
HP_DeskJet_895C_USB_ES29Z231JKGO_HPLIP HP DeskJet 895C Local Printer HP Deskjet 895c hpijs, 3.10.9.11 Idle - "ready to print"
I hope when upgrading the system, I will not get error from PPD file not found ... With my current PPD file, I get (really not sure) this error, but print is working so, it doesn't matter :
E [09/Jan/2011:21:08:04 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:21:08:04 +0100] [cups-deviced] PID 5705 (dnssd) stopped with status 1!
E [09/Jan/2011:21:08:09 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
Thanks for all .. hope you don't think I'm crazy ^^
Last edited by loopx (2011-01-09 20:31:21)

WD and their lack of support for Mavericks:
A recent email from WD reads:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

Unable to set working directory (-2147024832) for some app installs

I've found several drivers on a Dell Laptop that don't play well with others in MDT 2012, so I started making an application install package for them instead. Most of them fail with an "unable to set working directory" error. I checked
the app install logs and they don't really make any sense to me. I know the process as a whole works, because I can install .Net 4.0 runtimes without any problems using the same method. The important bits of the ZTI App log are below. Would
be for any guidance on this, as I'm stumped and none of the searches on the exact errors are of much help.
A sample error returned in the wizard is:
WARNING - unable to set working directory (-2147024832)Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
The ZTIApplication.log file contains the following... the first is one that works (.NET 4), the second is one that fails. (Not using code block for this one, it doesn't like it).
<![LOG[Validating connection to \\ITSASERVER\DeploymentShare$\Applications\Microsoft .NET 4.0 runtime 4.0]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1"
thread="" file="ZTIApplications">
<![LOG[Already connected to server ITSASERVER as that is where this script is running from.]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ Change directory: \\ITSASERVER\DeploymentShare$\Applications\Microsoft .NET 4.0 runtime 4.0]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications"
context="" type="1" thread="" file="ZTIApplications">
<![LOG[ Run Command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe dotNetFx40_Full_x86_x64.exe /norestart /passive]LOG]!><time="08:20:30.000+000" date="09-27-2013"
component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI installing application ]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41031 sent: ZTI installing application ]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[About to run command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe dotNetFx40_Full_x86_x64.exe /norestart /passive]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context=""
type="1" thread="" file="ZTIApplications">
<![LOG[Command has been started (process ID 3212)]LOG]!><time="08:20:30.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 3212)]LOG]!><time="08:20:31.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 3212)]LOG]!><time="08:20:31.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1"
thread="" file="ZTIApplications">
<![LOG[Return code from command = 0]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Application Microsoft .NET 4.0 runtime 4.0 installed successfully]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41033 sent: Application Microsoft .NET 4.0 runtime 4.0 installed successfully]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Property InstalledApplications001 is now = {9abb5842-9a8e-45c5-9268-4fa4e69dba34}]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Application Microsoft .NET 4.0 runtime 4.0 needs a reboot, initiating.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Dependent application requested a reboot]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Property SMSTSRebootRequested is now = true]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Property SMSTSRetryRequested is now = true]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Exiting to initiate a reboot with retry (to pick up where we left off)]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ZTIApplications processing completed successfully.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41001 sent: ZTIApplications processing completed successfully.]LOG]!><time="08:23:48.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[################]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Entry: {dee65f94-e269-4eac-927d-6e06c0e0eb9d}]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Name: Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[################]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Validating connection to \\ITSASERVER\DeploymentShare$\Applications\Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context=""
type="1" thread="" file="ZTIApplications">
<![LOG[Already connected to server ITSASERVER as that is where this script is running from.]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[ Change directory: \\ITSASERVER\DeploymentShare$\Applications\Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00]LOG]!><time="08:25:04.000+000" date="09-27-2013"
component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[WARNING - unable to set working directory: (-2147024832)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="2" thread="" file="ZTIApplications">
<![LOG[ Run Command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe Setup.exe -s]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications"
context="" type="1" thread="" file="ZTIApplications">
<![LOG[ZTI installing application ]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Error executing web service http://ITSASERVER:9800/MDTMonitorEvent/PostEvent?uniqueID=2a0f4469-d803-4976-b434-adbf06b85c23&computerName=Lat3440_0927b&messageID=41031&severity=1&stepName=Install Applications&currentStep=61&totalSteps=88&id=4C4C4544-0031-4610-8053-B7C04F4C5731,E0:DB:55:AC:48:1C&message=ZTI
installing application &dartIP=&dartPort=&dartTicket=&vmHost=&vmName=: The server name or address could not be resolved
(-2147012889)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41031 sent: ZTI installing application ]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[About to run command: \\ITSASERVER\DeploymentShare$\Tools\X64\bddrun.exe Setup.exe -s]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread=""
file="ZTIApplications">
<![LOG[Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="3" thread="" file="ZTIApplications">
<![LOG[Error executing web service http://ITSASERVER:9800/MDTMonitorEvent/PostEvent?uniqueID=2a0f4469-d803-4976-b434-adbf06b85c23&computerName=Lat3440_0927b&messageID=41032&severity=3&stepName=Install Applications&currentStep=61&totalSteps=88&id=4C4C4544-0031-4610-8053-B7C04F4C5731,E0:DB:55:AC:48:1C&message=Error
installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.
&dartIP=&dartPort=&dartTicket=&vmHost=&vmName=: The server name or address could not be resolved
(-2147012889)]LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
<![LOG[Event 41032 sent: Error installing application Dell 3440_Chipset_Driver_JD3WN IMEI drivers 9.5.3.1520_A00: The system cannot find the file specified.]
<![LOG]!><time="08:25:04.000+000" date="09-27-2013" component="ZTIApplications" context="" type="1" thread="" file="ZTIApplications">
Why can't it find it or set the working directory, especially when it's already validated that it's there?
--smthng

I'm not familiar with how Dell does their client side software, but for the server-side software (my area of expertise), I've always done something like the following:
I recommend running every application install in a VBScript/Powershell wrapper. You get logging for the application back on your SLShare as well as its cleaner (you can replace Drivers A05 with A06 by changing the script, rather than editing the application
in MDT).
sApplicationName = "Dell 12G Chipset"
oLogging.CreateEntry "Install-" & sApplicationName & ": Starting " & sApplicationName & " installation", LogTypeInfo
'//Set Destination Folder
sDestFolder = "c:\temp\"
'//Set Source Install Directory
sSourceDir = oUtility.ScriptDir
sSourceDir = sSourceDir & "\Source"
'//Check that folder exists, if not, create it.
oLogging.CreateEntry "Install-" & sApplicationName & ": Check that " & sDestFolder & " exists.", LogTypeInfo
if not oFSO.FolderExists (sDestFolder) then
oFSO.CreateFolder sDestFolder
End If
'//Copy folder from MDT share to C:\Temp
oLogging.CreateEntry "Install-" & sApplicationName & ": Copy from " & sSourceDir & " to " & sDestFolder, LogTypeInfo
oFSO.CopyFolder sSourceDir, sDestFolder
'//Sleep for 2 seconds to allow copy to finish
wscript.sleep 2000
sFile = sDestFolder & "Source\setup.exe"
'// Check if file/folder exists
If not oFSO.FileExists(sFile) then
oLogging.CreateEntry "Install-" & sApplicationName & ": " & sFile & " was not found, unable to install " & sApplicationName & "", LogTypeError
ZTIProcess = Failure
Exit Function
End if
'// Create log entry to show file being run
oLogging.CreateEntry "" & sFile & " -s", LogTypeInfo
iRetVal = oUtility.RunWithHeartbeat("" & sFile & " -s")
if (iRetVal = 0) or (iRetVal = 3010) then
ZTIProcess = Success
Else
ZTIProcess = Failure
End If
wscript.sleep 15000
'// Disable Zone Checks
oEnv("SEE_MASK_NOZONECHECKS") = 1
'//Folder Cleanup
oFSO.DeleteFolder sDestFolder & "Source"
I always copy any drivers that are installed after the fact (everything for me other than SAS/NIC drivers) to the C:\Temp as it can break. I always update my NIC drivers during the build to the latest Dell software using their packs. I try to
not mess with my boot image unless I'm adding a new model that is not supported by the built-in drivers.

Unable to set default program for .pdf

CURRENT PROBLEM:
As show in print screen, when i attempt to set default program nth happens at all. The only way i can open any .pdf file now is by 1st opening adobe reader 9 and select the .pdf file manually
INITIAL STAGE OF PROBLEM:
Problem started after upgrading to windows 7 from vista. Windows 7 is able to recognise adobe reader 8 as a valid default program since it is in windows.old. Thus the default for .pdf is adobe reader 8 (it was installed in vista).
Subsequently, installing adobe reader 9 isof no use as it will be ignored and windows 7 will only continue to use adobe reader 8 as the default reader when i try to open a .pdf file, unless if i manually opened adobe reader 9 and selected a .pdf file manaually
However, I am unable to uninstall adobe reader 8 as the "program and feature" can only identify adobe reader 9 and does not think that adobe reader 8 exists.
ATTEMPTs TO SOLVE:
Thus, I removed windows.old by using the disk cleanup. However, I am still unable to set adobe reader 9 as the default reader. Instead, .pdf are no longer accessible/"open-able" unless I 1st opened adobe reader 9 and then selected a .pdf manaually.
I've attempted reinstalling and restarting comps etc, they dun seem to help. I suspect the OS is now only able to recognise adobe reader 8 from windows.old as a valid program directory due to some registry issues since it was initally set as the default when i 1st upgraded the OS. Now that adobe reader 8 is removed, there might be some corrupted registry somewhere that needs to be set right again?
Really need help with this. Thanks a million.

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

I am unable to set my WD mybook world edition (white light) for time machine.

I have new iMac running OS X Mavricks 10.9 and a WD mybook world edition (white light) connected via eithernet to router.
I am unable to set up time machine using this drive.
I can see the MyBookWorld drive in Finder and read and write files with no problems. I can also see the MyBookWorld_Backup drive but I am unable to connect.
Time machine can see the drive but when I select, use drive, it trys to connect and gives me an error message: There was a problem connecting to the server "MyBookWorld-Backup"
I have already updated the hardrive firmware.
Any ideas?

WD and their lack of support for Mavericks:
A recent email from WD reads:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

Unable to set up Express A1088

Hi Fellow Humans
I'm after some advice and would really appreciate any that you can offer, I recently bought an additional Airport Express to add to my network.
My Current network is set up with 1 time capsule and 2 additional express'. I purchased an Airport Express A1088 as an additional airtunes unit for a sound bar i have. I am having some issues setting this up, I have tried the following and wonder if there is something I may've missed.
Unable to set up using ios devices (ipad air, iphones 5s both running ios 7.1.2)
Unable to set up using macbook air running mavericks (I am aware that apple no longer support A1088 under mavericks)
Not registering on Windows 7/8 using original CD
Being recognised in Windows XP on Virtual Machine using original CD, I managed to get to start setting this up but it failed.
I am now stuck the device will not connect to my current network and keeps asking for me to insert the password I created during the failed set up. However after numerous Factory, Hard and Soft Resets still asks me for the password.
I purchased this from a seller on ebay who had a good reputation, I have noticed that the packaging appears to be a Chinese version - is this going to be an issue?
One of the express' on my network is an american version - apart from the plug change it was simple enought to set up.
Before contacting the seller I hope someone here could help me.
Thanks in advance

Unable to set up using ios devices (ipad air, iphones 5s both running ios 7.1.2)
Unable to set up using macbook air running mavericks (I am aware that apple no longer support A1088 under mavericks)
This would be the case as Apple no longer supports the older 802.11g AirPorts.
Not registering on Windows 7/8 using original CD
This is also because Apple does not provide support for these earlier AirPorts on Windows-based computers either.
Being recognised in Windows XP on Virtual Machine using original CD, I managed to get to start setting this up but it failed.
I use Parallels as my Virtual Host. I find that I need to use the "Configure Other" option in order to access the AirPort when running inside a virtual machine.
I purchased this from a seller on ebay who had a good reputation, I have noticed that the packaging appears to be a Chinese version - is this going to be an issue?
Potentially, yes. Although all AirPorts can be adapted to work with different electrical standards, the Wi-Fi standards are most likely going to be an issue ... even in just the 2.4 GHz band. As you can imagine not all radio channels are supported everywhere.
In the long run you would better served to send the older Express back and get yourself either a 1st or 2nd generation 802.11n Express instead.

Unable to set requested sample format on soundcard

Hello friends.
I'm having a nightmarish relationship with my usb soundcard on various linux distributions from the day i started to use linux. After getting pops, clicks, soundcard not starting until i unplug it and plug it in again, system starting internal soundcards instead of the usb one (even when i set it as the main one) etc. I am now faced with a new challange it seems.
When i try to play csound file, it gives me an error saying that:
unable to set requested sample format on soundcard
When i try to play the speaker-test -c 2, it says:
sample format not avaivable for playback
This all happend after i created a .asoundrc file, which (it seems) fixes the issue of the system randomly picking which card it likes to boot, but now i'm unable to play anything.
Does anyone have any hints?
Last edited by NotaName (2014-09-16 17:50:57)

emeres wrote:
NotaName wrote:
[...] my .asoundrc is the same as the one in arch linux wiki on alsa, i just replaced the word audio with USB, since that is what cat gave me. I'm also using the alsa-base settings, but it doesn't seem to work everytime.
As for the applications, it doesn't matter if I use 44100, 48000, or any other sample rate, it gives the same output.
That does not make any sense: ~/.asoundrc holds alsa configuration, /etc/modprobe.d/50-alsa.conf or similar holds modprobe configuration. There is no need for ~/.asoundrc, as of this point. Is the usb sound cardconstantly plugged in? The sample rate matters for quality.
Edit: Please post your ~/.asoundrc and modprobe configuration files, maybe I misunderstood it.
First my settings.
1) .asoundrc file:
pcm.!default{
type hw
card USB
ctl.!default{
type hw
card USB
2) alsa-base.conf file:
options snd-usb-audio index=-1
3) output of :
$ cat /proc/asound/card*/id
NVidia
USB
4) output of:
aplay -l
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevices #0: subdevice #0
card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevices #0: subdevice #0
card 0: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevices #0: subdevice #0
card 1: USB [Scarlett 2i2 USB], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevices #0: subdevice #0
5) out put of:
lspci -nn | grep -i audio
01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b] (rev a1)
I have a Scarllet 2i2 usb audio card and have disabled the motherboard audio card in the bios, however i have no idea what this NIVIDIA GK107 is.
My usb card doesn't start when i boot the computer, so i have to manually unplug the usb connection and plug it back in again. This has been the case on almost all linux distributions i tried, i think only in fedora it booted with the computer once or twice. However after initial boot if i only restart the computer, i don't have to unplug and plug the sound card again, it's only when i turn off the computer and turn it on again.
My usb card loaded up fine with the alsa-base conf for dozen of times, but all of a sudden it refuses to load as the default card and in alsamixer i get that NVIDIA thing as my default card, which i can't change. Because of that, i created a .asoundrc file, which makes the system load my usb card as the primary device, however, then i cannot play or do anything with audio, as the system is unable to control it. When i was talking about output, i meant the error outputs, not the sound, as there is no sound output (i understand what sample rate does, it just doesn't matter if i set it to 44100, 48000, or 96000, the errors still say, that the programs cannot set the sample rate).
As for /etc/modprobe.d/50-alsa.conf - i have no such file in my system. And i cannot set it as you proposed, since "lspci -nn | grep -i audio" only shows the output of that NVidia thing.
P.S. sorry for the late response rate, as i just got back from a 24 hour shift and thank you for your answers.
Last edited by NotaName (2014-09-18 10:11:43)

Unable to set effects in loaded application

Hi All,
I'm ABLE to get UIComponents from loaded app and set their properties. It's loaded as a child in same domain.
I'm UNABLE to set any effects like Rotate or Glow on the same UIComponent.
I have mxml definitions of the effect i need in the parent app.
Have tried several ways to try to get it to work.
glowPulse.target = [eventTarget];
glowPulse.play
// TypeError: Error #1006: dispatchEvent is not a function
eventTarget.setStyle("showEffect", rotate );
// no effect
Is it possible or are you stuck with just setting simple properties and using functions defined in sub app like a remote object service call?
Thanks in advance,
Kevin

I don't quiet understand your question .. but, try this..
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" >
    <mx:Script>
        <![CDATA[
        import mx.controls.Button;
        import src.SharingComp;
            import mx.controls.Alert;
           import mx.managers.PopUpManager;
           private function createPopUp(event:MouseEvent):void {
                var button:Button = Button(event.currentTarget);
                button.setStyle("showEffect", "Fade");
                button.visible = false;
                button.visible = true;
        ]]>
    </mx:Script>
    <mx:Button x="31" y="56" label="Button" click="createPopUp(event)"/>
</mx:Application>
Hope this helps,
BaBo,

DVD Studio: 1st-Play menu buttons not "clickable" ...

hi Folks,
Using DVD Studio Pro 4.1.2 ... creating my first complex build; I have one "first play" menu,
offering 3 choices (via buttons), that lead to 2 sub-menu's or a 1st track choice.
I embedded a 5-min audio clip to play behind the "1st-play" menu, which I did get to work.
When I simulate the compilation, all buttons on all menus work fine.
When I burned the compilation to DVD, none of the 3 buttons on my first play
menu worked. None seem "clickable" while the music plays, hovering over
any with the mouse did not change the shape of the pointer, as is is expected.
Is there something in the playing of music that might be screwing up the
linking ability of the button?
Seems that once the music stopped, I could somehow get into one of the sub-menu's
playing the DVD on my iMac, playing it on a PC, nothing worked.
Any suggestions would be appreciated!
thanks

Tried Gary's suggestion, dropped in a 3-second black movie (.mov, rendered in FCE - not a graphic) for the 'first-play' menu, which is set to jump the 'main' menu with the 3 choices and the music in the background. It gets to the 2nd menu, but the 2nd menu buttons are also not clickable (again) in the final burn. They ARE in the simulation.
a little frustrated by my Mac world on this one, I sent my AC3 & M2V streams over to my PC - but these files - at least the M2V portions,(rendered by compressor) are not readable and bring up arcane error messages in both my DVD authoring programs on the PC (DVD Architect Studio & DVD Lab Pro). That's a different game altogether, though.
anyway, still wasting DVDs and no answer yet..
thanks for all attempts ...

Unable to set some dates in Adobe bridge cs2

HI ALL
Our keywording team using the Adobe bridge CS2.
Kindly hep me to understand Why some dates Like
1/1/1970
1/1/1642
1/1/1890
etc .....
I unable to set in ITPC image Tab information .............
Lakhan

Hi
Thanks for revert ......
I tried with CS2 & CS3 but only specific dates like (1/1/1970) i above mentioned is still not reflecting in IPTC image info ........
Please suggest....

Illustrator won't run: "unable to set maximum number of files to be opened"

I have an intel macbook pro (core duo with 2GB ram) and a copy of purchased adobe creative suite 2. Other applications in the suite like photoshop, acrobat, etc can run on my mac without any problem. But when I try to run illustrator, it just shows an error message "Unable to set maximum number of files to be opened" and quits. I also installed a trial version of illustrator cs3 and got the same problem. Can anyone help? Thanks.
CC

Hi, I realize this is an old thread but it was unanswered and the issue has come up again in a newer thread:
http://forums.adobe.com/message/2534652
If the original poster sees this, can you reply tin the new thread and let us know if you were ever to solve this problem?
Thanks!

Service Desk Unable to set status to Customer Action and Proposed Solution

Hi Everyone,
We are unable to set a service desk issue to the status Customer Action or Proposed solution.
I have someone create a new issue in the bakend system and when I receive the issue I assign it to myself as the processor. When I try to set teh status to Customer action it is grayed out.
I have checked the following:
1. As a test I assigned My user with sap_all profile so does not appear to be authroisation related
2. The status profile has all six standard values (New, customer action, In Process, Sent to SAP, Proposed Solution, Confirmed).
3. The transaction types have been defined using the standard profiles for Text Det. Procedure, Partnet Determination Procedure, Status Profile. The Partner Function ORG is set to Sold-To-Party , The date profile is a SRV_SLA_ITEM and the Action profile is set to SLFN0001_ADVANCED. The Org Data Prof is set to a customer defined one: ZSSC000000001.
4. I have checked transaction ppoma_crm and the org structure and my user is assigned to a team lead position.
Your assistance is greatly appreciated.
Michael

Hi Michael,
please check your status profile for the "lowest status no." and "highest status no." values of the status values as Alex mentioned!
You can find this in SPRO under "SAP Solution Manager> Scenario-Specific Settings>Service Desk>Service Desk>Status Profile".
If the "high" value of the status "New" is lower than the status number of status "Customer Action" than you can not set the message from "New" to "Customer Action"!
Hope this helps,
Christoph

Unable to set the selected value for a ADF LOV

Hi,
I am developing an application using jdeveloper 10.1.3 and Struts.
I have created a ADF LOV on my JSP Page as given below:
<html:select property="lob" onchange="javascript:selectLOB(this.form)">
<html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
</html:select>
When i submit the form, i am able to get the value of the selected Value in the List.
JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
Row r = (Row) listBinding.getSelectedValue();
String SoLob = (String) r.getAttribute("LobLob");
But i am unable to set the selected value back in the list when i return to the form again.
I tried the following:
int x = listBinding.getSelectedIndex();
listBinding.setSelectedIndex(x);
It would be really helpful if some one could let me know what needs to be done.
Thanks,
Subashini

Gyan,
I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
"Rendered" on the field so that based on search parameters we can hide result table column.
After searching online, I modified the controller code as follows
1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
3. Modified the controller code as follows :
        OAApplicationModule am = pageContext.getApplicationModule(webBean);
        OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
        OADBTransaction txn = am.getOADBTransaction();
        if (testvo != null)
          OARow row = (OARow)testvo.first();
            if (a.equalsIgnoreCase("Approved"))
                 row.setAttribute("Testrender", Boolean.FALSE);
            else
                 row.setAttribute("Testrender", Boolean.TRUE);
        } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
Its using only the value of one search parameter but not the second one .
The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
So can you please let me know how to proceed from here ?

Unable to set kernel parameters using solaris 10

HI,
I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
Can anyone help me in setting the above kernel parameters.
Its not possible to set it thru /etc/system.
thanx
guru

HI,
I'm trying to install DB2 8.2 on solaris 10.the problem i'm encountering in installation is unable to set MSGMAX and MSGMNB kernel parameters. I tried setting the new replacement parameter process.max-msq-qbytes through projects->Resource Control from the management console.but still uinable to set the parameters.
Can anyone help me in setting the above kernel parameters.
Its not possible to set it thru /etc/system.
thanx
guru

Unable to set 1st Play

Similar Messages

Maybe you are looking for