Unable to set back to Entertainment mode after playing BF 2

Anything else works fine, however after I exit battlefield 242, the card is locked in game mode and will not change, until rebooted.
Is there any known workaround?
Card is X-Fi Fatality Titanium Pro PCI E.

Hi,
This tends to be a problem which is caused by applications or games not releasing the OpenAL context device when shutdown.
This can mainly only be resolved by an update from the developer, and not by Creative or the OpenAL developer(s).

Similar Messages

I am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page

i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.

Contact Apple support for warranty service.

Impossible to go back to wifi mode after ethernet back-up?, Impossible to go back to wifi mode after ethernet back-up?

Impossible to go back to wifi mode after ethernet back-up?
I explain : i just bought time capsule, everything works while in wifi. but if i want to make my 1st time machine backup (1T, to heavy for wifi...) and I want to use an ethernet cable, I have to disconnect the wifi mode in the airport utility, to allow the ethernet connection tu function.
That works fine, BUT, once the backup is completed and i want to switch back to normal wifi mode, NO WAY, the time capsule led turns orange and airport doesn't locate the TC anymore.
any ideas?

ps : my TC is connected wifi to the ADSL router, it has no separate network.
....I'm kinda desperate...! :-(
Here is the trouble..
You have used the TC the wrong way.. this is "Join a wireless network"
When you use the TC in this mode.. the ethernet ports are shut off.. actually even the wireless becomes a dumb client of the main router.. this is the poorest method to setup the TC.. don't do it.. ever. You will decrease wireless speed by at least 50% if not more.. and it will be flakey and terrible.
As I said, reset the TC.. the TC must be in router mode or bridge mode.. but the backup can be done in isolation from the network. If the TC is in router mode it will just work as network disk when you have it plugged in.. do not worry about errors.. when you are finished the backup and want to use wireless.. change the TC to bridge mode and plug it into the main router.. never use wireless links to non-apple routers.

Unable to boot back to os x after installing windows7

I'm using iMAC with all the softwares updated.
As the title stated, I'm unable to boot back to my mac os x after i successfully installed windows 7.
I hold on to the Option key / Alt key but to no avail.
I'm able to see my Mac HD via My Computer from windows 7.
I even manage to install drivers from the os x cd itself to windows 7.
Just thinking is it something wrong with the MBR of mac os x or windows that caused this issue to arise.
Any help or guide will be helpful!
Regards,
xiang

X on startup should take you into OS X
For now, go to Windows control panels : Boot Camp and change the default OS there.
Whether it is keyboard, bluetooth, or karma, some people's systems do seem to have trouble on the timing or getting Option/Alt to bring up the EFI Boot menu/manager.

Unable to view anything in landscape mode after update to 4.1.

I recently noticed photos, safari, google, etc. will not switch to landscape mode after updating to iphone OS 4.1. Tried total reset of iPhone but problem still exists. Should I do a reset/restore?
Thanks

Is Orientation Lock on?
<http://applelife.tv/2010/07/iphone-orientation-lock/>

My iPad 2 goes back into recovery mode after restore is complete. I updated my iTunes to 12 before I attempted to restore.

I Hard reset my IPAD 2. It was showing connect to iTunes. I did and it prompted me to restore and update. It installed the software and said my iPad had been returned to factory settings and would restart but it never does. It just goes back into recovery mode and iTunes prompts me to restore again.

Yes but the apple logo won't appear. It just says connect to iTunes. When I do that it goes through the restore process again. Says it's been restored and my device will restart but it never does. Just goes back to the connect to iTunes screen.

E72 - Unable to set up e-mail mailbox after firmwa...

Hi all,
I have a newly acquired E72-1 which has been updated to the latest firmware version 051.018.
I'm trying to set up the e-mail function on my E72 but getting nowhere.
I keep getting to the enter e-mail details/password etc page then…nothing. The mail box has not been set up, each and every time.
From the home screen, I hit setup e-mail>start e-mail setup>start
Then it asks ‘connection needed’ connect to: and I click yes and it shows ‘Preparing setup’…
Then it shows a screen with all the e-mail services, from the top: Ovi Mail, Yahoo Mail, Google Mail, Windows Live, BT Internet, Mail for Exchange, Lotus Notes, Other
From here, if you click on the various choices such as Gmail or windows live for Hotmail, you get the enter user name + password boxes…once these are filled in
You get the detecting e-mail settings tab for a few seconds…then it reverts to the screen showing the e-mail services.
I have tried this dozens & dozens of times without success…no mail boxes have been set up. It just cycles through the setup process each time.
I have even done a Hard reset on the E72 and tried to set up e-mail after…with no luck.
Any suggestions?? I have to say I’m getting very cheesed off as e-mail was the main reason to get the E72!!
Has the Nokia Messaging service been switched off??
Solved!
Go to Solution.

I came to this discussion because google indicated it when I searched 'nokia E72 unable to create mailbox'.
'Unable to create mailbox' used to be a huge headache for me to use E72 for over one year and half. I tried to soft and hard reset the device, brought it to Nokia Care Point to spend 15 pounds to re-install the whole system, or call the customer service line again and again for a continuous one year, but the problem still existed. To be honest, I was not satisfied with Nokia customer services at all. The staff at the Nokia Care Point only cared about charging money. After the first re-instalation when the problem still existed, they said I had to pay more to process other checks. In terms of technicians from the customer service line, they were helpless. I called them again and again. Each time when I called, there was a different technicain, and I had to repeat the situation again and again. They only knew to suggest me do the basic reset, including to try *#7370# or to reset factory factory settings, which I had tried over hundreds times. They even used remote control application to install some remote app on my E72 and did some checks from their ends, but still it didn't help. When the technician realised he/she didn't have another method, they promised to call me back later, but they never did. I was so disappointed with their service. It took around an hour or longer each time I called. When the problem couldn't be fixed, I had to call again and repeat the problem from the beginning again to a new line advisor. It was so time and money consuming!!!! And what was the most annoying was that they were not helpful! After such torturing experience, the problem still existed! It was a frustrating and exhausting experience from 05.2011 to this year 06.2012... I gave up Nokia in the end, though it used to be my favourate phone.
Sorry to make such a long complaint. I just want to provide a feedback to Nokia, so as to let them know that their poor service and products are losing former loyalty clients.
===============================================
Right, back to the problem, 'unable to create mailbox'. Finally, I figured out what the problem was. It was a conflict between the device E72 and network provider, O2, for my case.
I am in the uk and use monthly contract of O2 sim card. The O2 network provides three kinds of data package: O2 Active, O2 Mobile network, and O2 Pay&Go. When I create mailbox or use Maps GPS, it access to the internet via O2 Par&Go by default, no matter how I set the priority of the connection destination. But when I changed the access point to O2 Active or O2 Mobile Network, the mailbox was able to be created and Maps app was able to recevie GPS data.
So here is my solution.
1) Hardset the device. Remember to backup all the data beforehand.
The method is to press Shift+Space+Backspace together with the power button when the device is powered off. Press until the device is restarted and the main screen, normally it should be Nokia's two hands joined together image, is seen.
2) Go to menu --> Ctrl. panel --> Settings --> Connection --> Destinations
There, you will find all the access points.
3) Go to Internet
Hopefully you will have the same options as I do, O2 Active, O2 Mobile Web, and O2 Pay&Go
Scroll to O2 Pay&go, click options, choose 'delete' to delete the O2 Pay&go option. (Don't worry to delete it, as the internet can be access to via the other two options without any problem.)
4) Go back to Destinations, do the same to Multimedia msg, WAP services, and Intranet.
Delete any O2 Pay&go options for these category.
===========================================================
Then, your phone should be ready to set up mailbox and to use gps without any problem. That was what happened to my Nokia E72.
Good luck!
Now, I feel my E72 is so powerful after the push mail and GPS function is recovered. But still, I am not satisfied with Nokia's service and will definitely not try any other of its products. Nokia has lost my loyalty and I believe I am not the only one.

CR 2008 Add-Ins - doesn't go back to preview mode afterwards

I created a Add-In with no problems and it all works well. But when I run my add-in, Crystal Reports switches to design mode and stays there. But when I run the Add-In that is in the downloadable sample, it also goes into design mode but then automatically switches back to preview mode so that I can see the effects on my report. I looked through the code but don't see anything that would be the cause for why it goes into preview mode.
How do I get my add-in to go back into preview mode after it runs?
Thanks.

Briefly tested -
I think it's the report state after the ReportClientDocument.Save() rather than any configurations in the Designer or settings in the report.
The record selection formula is updated, but not the report view on Save.
If I add lines to export the report (to force a report refresh) before the ReportClientDocument.Save(), then it comes back up in Preview.
Filter filter = new FilterClass();
filter.FreeEditingText = "{Employee.Employee ID} > 12";
reportClientDocument.DataDefController.RecordFilterController.Modify(filter);
reportDocument.ExportToDisk(ExportFormatType.PortableDocFormat, "C:\\testcraddin.pdf");
Sincerely,
Ted Ueda

Please Help, After Kernel panic restart failed- apple swirl(6 hrs), SafeMode-failed, SUMode-sucess. Could not unmount disk to erase. Repair permissions-multiple fail errors:unable to set permissions on... unable to set owner and group...

Please Help, I deleted an account that was the same name as the administrator but was not the administrator. Also a samsung galaxy s phone was charging through the usb port.
I closed out a program and got a message that the temp file could not be stored/saved.
Then a Kernel panic message occurred and restart was necessary.
The restart resulted in the screen with the apple logo and a continous swirl for 6+hrs,
Attempted Safe Mode start up, unsuccessful,
Single User Mode-sucess.
Ran $ fsck_hfs -rfd /dev/disk0s2 Ran several times repairs made with one which remained. something about a node.
No change in start up attempts
Started with install CD matching current OS 10.6
Ran Disk Utility Repair Permissions resulting in multiple errors:
One line/error
Warning: SUID file /////Ardagent has been modified and will not be repaired
144 lines/errors of this type of series of lines
Group permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
unable to set owner and group...error 22: Invalid Argument
unable to set permissions on...error 22: Invalid Argument
Ran Repair Disk, result:
Error: Could not unmount disk (in red)
Ran Verify Disk, result:
The volume HD appears to be ok (in green)
Next I attempted to erase the dist to start from scratch since I have data backed up on time machine.
Error message box
Volume Erase failed
Volume Erase failed with error:
Could not unmount disk
I am looking to solve without buying DiskWarrior unless only resort.

So it looks like solved it for now I will update later. What I did was after starting from the install cd for the 10.6 system I ran from terminal ran:
diskutil disablejournaling /dev/disk0s2
diskutil disableownership /dev/disk0s2
diskutil repairPermissions /dev/disk0s2
then i closed terminal and then when to disk utility and chose to repair disk with results all was fine. Then ran repair permissions and got similar results from terminal function next I erased disk and then chose to restore from time machine and it is now restoring! yea!

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Unable to set safari in full-screen mode

Hi folks,
I just factory reset my 15-inch MBP running 10.9.3. After doing so, I notice that I am unable to set Safari in full-screen mode. Any ideas??

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

HT1535 my iphone 5 will swithch back to automatic mode even after i applied manual management songs/videos, how to fix it?

my iphone 5 will swithch back to automatic mode even after i applied manual management songs/videos, how to fix it?

I have reset my phone a large number of times. It doesn't work. I am now reseting and setting it up as a new phone every 2 days. It works for a while and then teh cycle repeats.

IPhone 3GS 3.1.2/5.11.07 baseband after restore normal to iTunes just went back to recovery mode

My iPhone 3GS erased all setting and content tried to restore back thru iTunes 10.5, it process the restoration but after it just went back to recovery mode? Can any one help me to this prob or suggestion

Did you try this, copied from http://support.apple.com/kb/TS3694 ?
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.

How do i get my photos back, if I didn't back up my iPhone 5 and now its in recovery mode after updating to iOS 8.0.2?

How do i get my photos back, if I didn't back up my iPhone 5 and now its in recovery mode after updating from iOS 8.0.1 to iOS 8.0.2?

In you case, the only way is to use data recovery app to get back your lost photos, so the chance is uncertain. It depends on how smart the app it's. The good news is that most of the apps allow you to try them out. You can test them out by yourself. The steps are:
Install data recovery app on your computer
connect your iPhone and allow the app scan iphone
display scanning result
choose local folder to store recovered items
You can choose to recover your photos from local disk, iTunes backup or icloud. More details can be found out here.

Lost Mode and Play Sound are "Pending." However, iCloud indicates that it connected and backed up to iCloud at a date that is 1 week after it went missing. How is this possible without locking (Lost Mode Pending an internet connection)

Hi,
My wife lost her iPhone two weeks ago while on vacation in London (cell service inoperative in foreign country). Using Find My iPhone app on my device, I activated Lost Mode and Play Sound. However, both are listed as "Pending," since it those actions require the phone to connect to the internet (wifi only due to no cellular data coverage.).
We recently returned home and purchased a new iPhone.
However, when looking to restore the apps/settings from her old phone using a previous iCloud backup, iCloud indicates that the old phone connected to iCloud and backed up the original phone at a date that is 1 week after it went missing. How is this possible without locking (Lost Mode Pending an internet connection)?
If the phone was activated and connected to the internet via a wifi signal, shouldn't it immedately lock, show up on the map, Play Sound, and send me an email that the phone has been found?
I also read somewhere that if running iOS 7, the iCloud website interface enables you to track previous locations, for instance if the phone moves from wifi hotspot to hotspot. Is that true? If so, how do I do that?
Thank you for your time, and have a great day!
Sincerely,
- Matt

just giving this a wee bump as time is of the essence here and i need advice/ answers quick!
apologies if i've broke any rules!
alex

Unable to set back to Entertainment mode after playing BF 2

Similar Messages

Maybe you are looking for