Unable to set custom keybindings in gnome

I'm using forced fallback mode so I can disable gnome-panel and use AWN instead. And that's working great, except that when I'm in fallback mode my custom keybindings are completely ignored, but the defaults work. I've tried setting them in 'system settings'>'keyboard', ccsm, and org.gnome.desktop.wm.keybindings with dconf-editor.
Where normally (when using gnome-shell) there's a 'windows' section in 'system settings'>'keyboard', that section is not visible for me. When I change the bindings in ccsm and close it, they're back to default when I check again later. And the settings in dconf-editor persist, but are apparently being ignored in favor of the defualts.
Am I just overlooking a config file somewhere or what?

Thank you for the quick response!
Firefox does seem to have a much more reliable printing engine. Unfortunately, I am using a number of webkit CSS attributes available only within Safari. Gradients being one of these. Perhaps it's time to give up on them and simply render these custom layout elements as images... It's a pity really! Webkit delivers some very promising new technology for cross-media content delivery, yet without reliable print/pdf output control, these technologies and techniques are essentially useless.
I did leave feedback on this issue. Perhaps Apple will come up with a solution before I am forced to rebuild. .I most certainly would appreciate additional ideas and suggestions.
Thanks again

Similar Messages

Unable to Set Custom Paper size setting of 15 (width) x 12 (Height) using J

Hi,
     I am unable to print the report using the custom paper size setting of 15 (width) x 12 (Height) with printer friendly fonts so that we can print on Line or dot matrix printer.
     This problem is not solved from last 3 months and we dont get help anywhere.
     We are using Java with Crystal Report XI R2 design for the same.
                       ITable table=null;
DatabaseController dbCtrl=null;
ReportClientDocument oReportDoc=null;
try {
String reportName=fileName;
oReportDoc=new ReportClientDocument();
oReportDoc.open(reportName,0);
dbCtrl = oReportDoc.getDatabaseController ();
rs=ad.sqlStringBigST(query);
table = dbCtrl.getDatabase ().getTables ().getTable (0);
dbCtrl.setDataSource (rs, table.getName(), "Runtimeres");
Object oreportSource=oReportDoc.getReportSource();
IReportSource reportSource=(IReportSource)oreportSource;
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("EPSON FX-2175 ESC/P");
printOptions.setPaperSize(PaperSize.useDefault);
options.setPaperSource(PaperSource.manual);
oReportDoc.getPrintOutputController().printReport(printOptions);
} catch (Exception e) {
System.err.println(e.toString());
Please let me know what is the solution for the same.
Regards,
Raj

Hi,
    Yes i can understand that you need to first understand the root of the problem to give me the solution.
    I am here to answer to your questions until you understand what is the problem.
    Yes if i set the standard page size which are given in API doc , it sets up the page correctly.
    Following page size as given in the API doc works fine.
    http://devlibrary.businessobjects.com/businessobjectsxi/en/en/RAS_SDK/rassdk_java_api_doc/doc/rassdk_java_apiRef/com/crystaldecisions/sdk/occa/report/document/PaperSize.html
   It is rejecting the custom paper size and custom fonts (which in my case are printer friendly fonts).
Regards,
Rajshekhar SIpoy

Unable to set custom icon for system drive

Title says it all. Can't paste new custom icon onto drive icon in the Info panel-nothing happens. Any ideas?

When a custom icon is applied to a folder (including the "boot drive" icon, which is really just the top level folder), an invisible "Icon\r" file is created inside that folder (or a ".VolumeIcon.icns" in case of a volume - I missed this in the last post, sorry) and the "Custom Icon" file attribute is set. In order to do these things, a user must have sufficient privileges to modify the folder.
In Leopard, the default permissions are:<pre>
$ lsbom -d /Library/Receipts/boms/com.apple.pkg.Essentials.bom |grep "^. "
. 41775 0/80</pre>
The owner is "root", group is "admin", both have "read & write" privileges, and everyone else has "read only" privileges.
Similarly, in "Tiger":<pre>
$ lsbom -d /Library/Tiger/BaseSystem.pkg/Contents/Archive.bom |grep "^. "
. 41775 0/80</pre>
Nothing has changed. But furthermore, since the "sticky" bit is set, this might even mean that a custom icon set by one "admin" would only be removable by the same "admin" (though this isn't something I have tested). But either way, at a minimum, "admin" privileges would normally be required.
So if you had previously modified the permissions on the boot drive to allow non-admins to make changes, then certainly you woudn't have to have "admin" privileges to do this. But that is not the "normal" state.
Beyond that, it's hard to say why you can't make the changes even as an "admin" without at least knowing what the current permissions are on "/" and "/.VolumeIcon.icns"...

Unable to set custom speed to motion path on Camera

This is a followup question to "Controlling speed along motion paths"
(Many thanks to Mark Spencer and specialcase for the their excellent insights getting me this far =)
After experimenting with motion paths and realizing they were indeed what I was looking for, I set up my project so that the camera would follow specific paths along 2d images. Everything worked perfectly until I tried to modify the speed along which the camera travels along those paths.
In the motion path, in the speed drop down menu, I can select Constant, Ease in etc.... all the way to Custom, but they work slightly differently than I expected: while before (ie. applying motion curves to objects as opposed to the camera) I was able to getting a diagonal line in the Keyframe Editor where I could modify keyframes using bezier curves to adjust the speed, now, choosing the various speed options appears to change the "Transform.Position.X" and "Transform.Position.Y" curves directly.
When I select "Custom", "Motion path" and Custom Speed" appear in the keyframe menu above the Camera drop down, but its curve appears only as a dotted, completely horizontal line in the graphing window. The "Transform.Position.X" and "Transform.Position.Y" curves also revert to horizontal dotted lines. If I try to add curves to the custom speed line, the X and Y curves remain horizontal and the camera does not move.
Is there some reason I cannot get custom speeds for cameras without losing my motion path data?
Is there some way to work around this?
Thanks again for all of your help,
Tim

I'm not sure if there is some setting I have wrong:
When I try this, while I am able to set keyframes, the motion path data is reset. (ie. the Transform X and Transform Y curves reset to 0).
In the Keyframe Editor, I can make new curves for the X and Y values and for Timing, but the camera does not follow the motion path, it follows the new x and y curves. Trying to get those curves to match the motion path exactly is a large hassle.
This might help:
If I apply the motion path to an shape rather than to the camera, everything works perfectly (the object moves along the motion path, and I am able to set keyframes for the Custom Speed curve with no problems whatsoever). If I then copy the motion path directly from the shape and paste it to the camera layer, the path appears as a red curve (as it should), but the camera does not move.
Is there some way I can upload the motion file so that you can see what exactly is going on?
Thanks again,
Tim

Unable to Set Custom Ringtones on E63

Just got this phone (new) and have been fairly happy. HOWEVER, I have one grief that I have yet to get resolved. Except for one of my contacts, I can not seem to set either mp3's or aac's as a custom ringtone for a contact. Though I have gone through the process multiple times, only my custom default ringtone plays when I receive a call.
I would appreciate any and all help that will assist me in getting this resolved. To say I am slightly frustrated would be an understatement. Thanks ahead of time to all responses.
Happy New Year to all.

Duplicate numbers causes a number of problems, this was just one. It also will not display the caller's name if there is a duplicate. It's not confined to the E63 either.
If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

Unable To Set Custom Print Margins In Safari 5.0.2

Help Please!!
I have been trying, unsuccessfully, to change the "default" margins Safari uses when printing. I have selected different print drivers, added custom paper sizes, even changed monitor resolution – all to no avail. I am trying to format some web content for letter size printing and it looks as though I will have to give in to the quarter-inch top, left, right and half-inch bottom margins Safari so persistently imposes.
I am hoping there is at least one other out there who has fretted over this issue as I have. Any insight you can provide is greatly appreciated.
Thanks.

Thank you for the quick response!
Firefox does seem to have a much more reliable printing engine. Unfortunately, I am using a number of webkit CSS attributes available only within Safari. Gradients being one of these. Perhaps it's time to give up on them and simply render these custom layout elements as images... It's a pity really! Webkit delivers some very promising new technology for cross-media content delivery, yet without reliable print/pdf output control, these technologies and techniques are essentially useless.
I did leave feedback on this issue. Perhaps Apple will come up with a solution before I am forced to rebuild. .I most certainly would appreciate additional ideas and suggestions.
Thanks again

Service Desk Unable to set status to Customer Action and Proposed Solution

Hi Everyone,
We are unable to set a service desk issue to the status Customer Action or Proposed solution.
I have someone create a new issue in the bakend system and when I receive the issue I assign it to myself as the processor. When I try to set teh status to Customer action it is grayed out.
I have checked the following:
1. As a test I assigned My user with sap_all profile so does not appear to be authroisation related
2. The status profile has all six standard values (New, customer action, In Process, Sent to SAP, Proposed Solution, Confirmed).
3. The transaction types have been defined using the standard profiles for Text Det. Procedure, Partnet Determination Procedure, Status Profile. The Partner Function ORG is set to Sold-To-Party , The date profile is a SRV_SLA_ITEM and the Action profile is set to SLFN0001_ADVANCED. The Org Data Prof is set to a customer defined one: ZSSC000000001.
4. I have checked transaction ppoma_crm and the org structure and my user is assigned to a team lead position.
Your assistance is greatly appreciated.
Michael

Hi Michael,
please check your status profile for the "lowest status no." and "highest status no." values of the status values as Alex mentioned!
You can find this in SPRO under "SAP Solution Manager> Scenario-Specific Settings>Service Desk>Service Desk>Status Profile".
If the "high" value of the status "New" is lower than the status number of status "Customer Action" than you can not set the message from "New" to "Customer Action"!
Hope this helps,
Christoph

Unable to set Attribute of Media file(Import as custom link) on link panel?

When I import media file as custom link using link architecture than GetLongResourceName and GetShortResourceName method of resource handler are not called but other method of resource handler get call during placing of media file due to this I am not able to set custom name and path of media file.same case working fine in case of image and pdf.

following discussion partially solved the problem
http://forums.adobe.com/message/3975830

[CUPS] Unable to set my new CUPS server with an HP printer (solved)

Hello,
I come from Gentoo and I just installed my new Arch Linux server on a notebook with 2 NIC ... Now, I'm trying to set the CUPS deamon to share printer (HP DESKJET 895Cxi) for 3 workstations in my LAN. Before, it was working (printer and linux ... has never been very good...). But now, I'm not able, and it's about 1 hour I'm looking for a stupid error that I don't know if it's important or not ...
(all is on my Wiki : http://pix-mania.dyndns.org/mediawiki/index.php/Cups)
Here are a list of installed package : cups ghostscript gsfonts hplip
The printer (USB) :
(lsusb)
Bus 002 Device 004: ID 03f0:0004 Hewlett-Packard DeskJet 895c
(dmesg)
usb 2-2: new full speed USB device using uhci_hcd and address 4
usblp0: Disabling reads from problematic bidirectional printer
usblp0: USB Unidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004
Current configuration (only change made to original configuration) :
Listen <ip_serveur>:631
<Location />
Order allow,deny
Allow From all
</Location>
<Location /admin>
Order allow,deny
Allow From all
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny
Allow From all
</Location>
When starting cups service, all is fine : I can use a workstation to browse the Web Interface ... but printer seems to be not detected since it tells "No printers." when clicking on "Printers" tab. So, I go to "Administration" tab and, under "Printers", I click the "Find New Printers" and again, it says : "No printers found.".
Not goot ... so, like I was doing with Gentoo, I click on "Add Printer" ... then, I receive a redirection to HTTPS ... click on the link (or wait) and nothing happend (timed out): web interface is broken for HTTPS ... I really got no idea why HTTPS is not working .
After that, when updating the configuration (with vim) and restarting the service, deamon won't stop and I have to send a "kill -9" to the cupsd pid ...
I look in log and I can just see this :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
I googled for one hour, but is not more working right now ...
Some questions :
- the printer is not detected? Is it because of the ACLs errors ?
- what the hell is "ACLs" for cups ? Never seen that before ...
So, right now, I got a working HTTP but not working HTTPS, with no printer available ... very useless
This printer is working "well" with cups, since it's an old model and it's a HP printer, so is "fully?" working on Linux ...
Any idea on what to do/try now ?
EDIT: after that message, I just refresh the page (I'm using Chromium) and ... magically, HTTPS was working (after accept untrusted certificate for HTTPS?) ... Then, go back to "Find New Printers" and now, it was working. Printer has been added ... Seems to be OK, but the "Print Self Test Page" doesn't work right now because of this :
Unsupported format 'application/vnd.cups-command'!
Current log file :
E [09/Jan/2011:18:19:55 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:24:48 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:29:08 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:28 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:36:42 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:41:06 +0100] Unknown SystemGroup "sys root lpadmin" on line 13, ignoring!
E [09/Jan/2011:18:41:06 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:42:24 +0100] Unknown SystemGroup "lpadmin" on line 14, ignoring!
E [09/Jan/2011:18:42:24 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:45:12 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:47:32 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:48:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:49:35 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:18:59:46 +0100] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:06 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:13 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:33:37 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:33:37 +0100] [cups-deviced] PID 2744 (dnssd) stopped with status 1!
E [09/Jan/2011:19:33:37 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:34:09 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:19:34:09 +0100] [cups-deviced] PID 2763 (dnssd) stopped with status 1!
E [09/Jan/2011:19:39:51 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:39:52 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:41:23 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [09/Jan/2011:19:44:49 +0100] Unable to encrypt connection from <ip_workstation> - A TLS packet with unexpected length was received.
E [09/Jan/2011:19:47:16 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
E [09/Jan/2011:19:49:36 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/HP_DeskJet_895C_USB_ES89M230MKGO_HPLIP) from localhost
EDIT2: tried to print "Print Test Page" instead of the above ... and got these errors :
(web interface)
"/usr/lib/cups/backend/hp failed"
(error_log)
E [09/Jan/2011:20:08:31 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:20:08:31 +0100] [cups-deviced] PID 3126 (dnssd) stopped with status 1!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Setting locale failed.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 559: dBus Connection Error (Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)!
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Please check that your locale settings:
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANGUAGE = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LC_ALL = (unset),
D [09/Jan/2011:20:09:16 +0100] [Job 5] LANG = "fr_FR.UTF-8"
D [09/Jan/2011:20:09:16 +0100] [Job 5] are supported and installed on your system.
D [09/Jan/2011:20:09:16 +0100] [Job 5] perl: warning: Falling back to the standard locale ("C").
D [09/Jan/2011:20:09:16 +0100] [Job 5] GhostScript extra search path ('GS_LIB'): /usr/share/cups/fonts
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-uuid=urn:uuid:e4395221-1209-32a9-5add-30f7945eaa6b.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'job-originating-host-name=localhost'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option job-originating-host-name=localhost.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-creation=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-creation=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'time-at-processing=1294600145'
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option time-at-processing=1294600145.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Pondering option 'AP_D_InputSlot='
D [09/Jan/2011:20:09:16 +0100] [Job 5] Unknown option AP_D_InputSlot=.
D [09/Jan/2011:20:09:16 +0100] [Job 5] prnt/backend/hp.c 625: ERROR: 5021 device communication error!
D [09/Jan/2011:20:09:16 +0100] [Job 5] GPL Ghostscript 9.00: Unrecoverable error, exit code 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process 3154 ending: "gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -dDEVICEWIDTHPOINTS=5..."
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer return value: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] renderer received signal: 1
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: No such file or directory (2)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] KID3 exited with status 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3153 (KID4) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Renderer process finished
D [09/Jan/2011:20:09:16 +0100] [Job 5] Process dying with "Error closing renderer", exit stat: 3
D [09/Jan/2011:20:09:16 +0100] [Job 5] error: (0)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Cleaning up ...
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 15
D [09/Jan/2011:20:09:16 +0100] [Job 5] Killing process 3152 (KID3) with signal 9
D [09/Jan/2011:20:09:16 +0100] [Job 5] Error closing renderer
D [09/Jan/2011:20:09:16 +0100] [Job 5]
D [09/Jan/2011:20:09:16 +0100] [Job 5] Closing foomatic-rip.
D [09/Jan/2011:20:09:16 +0100] [Job 5] Backend returned status 4 (stop printer)
D [09/Jan/2011:20:09:16 +0100] [Job 5] Printer stopped due to backend errors; please consult the error_log file for details.
D [09/Jan/2011:20:09:16 +0100] [Job 5] End of messages
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state=5(stopped)
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-message="/usr/lib/cups/backend/hp failed"
D [09/Jan/2011:20:09:16 +0100] [Job 5] printer-state-reasons=paused
E [09/Jan/2011:20:14:21 +0100] [Job 5] Stopping unresponsive job!
EDIT3: I tested the ppd from cups (and not hpijs) and got the same problem ... The latest idea was to unplug USB and plug to another USB ... and it seams to works ... Now, the test page print "fine" ...
So, I shared the printer over my LAN, and tried to print from a workstation ... it works fine now ... when looking error_log, I can see than there is no more Ghostscript error .
But I have a last question .. if somebody can answer ... When choosing a PPD file, I have the choice between 3 version :
- hpijs, 3.10.9
- hpijs, 3.10.9.11
- hpcups, 3.10.9
Don't know why onlyl the HPIJS got the ".11" and not any others ... I selected this one and here is what Cups say about the printer :
HP_DeskJet_895C_USB_ES29Z231JKGO_HPLIP HP DeskJet 895C Local Printer HP Deskjet 895c hpijs, 3.10.9.11 Idle - "ready to print"
I hope when upgrading the system, I will not get error from PPD file not found ... With my current PPD file, I get (really not sure) this error, but print is working so, it doesn't matter :
E [09/Jan/2011:21:08:04 +0100] [CGI] Unable to create avahi client: No such file or directory
E [09/Jan/2011:21:08:04 +0100] [cups-deviced] PID 5705 (dnssd) stopped with status 1!
E [09/Jan/2011:21:08:09 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
Thanks for all .. hope you don't think I'm crazy ^^
Last edited by loopx (2011-01-09 20:31:21)

WD and their lack of support for Mavericks:
A recent email from WD reads:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

Unable to set a top-level property object

Hey guys
I've made a little sequence to fetch data from a XML file. In that XML file, there is some informations (entries) (IP addresses, port numbers, etc) about 4 different types of devices(sections are the devices names). The first section of the XML tells me the NAMES of the devices I have to configure. The type of each device is located in the entries of each device. Each device has its own information and I can have more than one device of a type. In teststand, I've created custom data types (containers with empty fields) for each type of device I need.
I want to dynamically create the devices that the XML file tells me to configure as fileglobal variables and populate them with their own config informations (entries of the XML file). I'm creating new fileglobal of the type I want using PropertyObject step and I'm creating an alias of that fileglobal that I'm passing in parameter to a subsequence who's getting infos from XML. Here, everything is OK.
The problem occurs when I want to configure 2 or more objects of the same type. At the SetProperty step (where i'm creating the fileglobal variable) teststand gives me the error:
"Unable to set a top-level property object to another object. Error accessing item 'Parameters.DeviceToInitStruct'."
Is there any ways to avoid that problem and creating to variable of the same type ?
thanks

Hi
I finally got rid of that problem.
Instead of using a PropertyObject.Clone step, I used a statement who's just copy the "MasterObject" into a "CloneObject" and i'm working with that copy. So the sequence can now create devices of the same type without any conflict with the first device.
i'll post here a short example to show how i did... maybe it'll be useful for someone...
regards

I am unable to set my WD mybook world edition (white light) for time machine.

I have new iMac running OS X Mavricks 10.9 and a WD mybook world edition (white light) connected via eithernet to router.
I am unable to set up time machine using this drive.
I can see the MyBookWorld drive in Finder and read and write files with no problems. I can also see the MyBookWorld_Backup drive but I am unable to connect.
Time machine can see the drive but when I select, use drive, it trys to connect and gives me an error message: There was a problem connecting to the server "MyBookWorld-Backup"
I have already updated the hardrive firmware.
Any ideas?

WD and their lack of support for Mavericks:
A recent email from WD reads:
Dear WD Registered Customer,
UPDATE: November 1st, 2013
As a valued WD customer we want to make you aware of new reports of Western Digital and other external HDD products experiencing data loss when updating to Apple's OS X Mavericks (10.9). WD is urgently investigating these reports and the possible connection to the WD Drive Manager, WD Raid Manager and WD SmartWare software applications. Until the issue is understood and the cause identified, WD strongly urges our customers to uninstall these software applications before updating to OS X Mavericks (10.9), or delay upgrading. If you have already upgraded to Mavericks, WD recommends that you remove these applications and restart your computer. If you have already upgraded to Mavericks and are experiencing difficulty in accessing your external hard drive, please do not save anything to the drive, disconnect the drive from your computer, and contact Western Digital Customer Service at http://support.wd.com/country/ for further assistance.
The WD Drive Manager, WD Raid Manager, and WD SmartWare software applications are not new and have been available from WD for many years. However, solely as a precaution WD has removed these applications from our website as we investigate this issue.
Sincerely,
Western Digital
Which is basically Western Digital informing you that their out-of-date utilities don’t support Mavericks.
In any case those utilities are not the most effective. The moral of the story is: the first thing you should do after buying a WD drive is to format it as HFS Extended (Journaled) and not install ANY of their utilities but instead use reliable applications like CarbonCopyCloner or SuperDuper - or Time Machine.

Unable to set parental controls on itunes b/c my username and password are not correct. How do I reset them? There is no prompt to give any clues what they are.

unable to set parental controls on Itunes b/c my user name and password got rejected. How do I reset them or figure out my username and password?

This is a user to user support forum. We are all iphone users just like you.
You are not addressing Apple here at all.
This is an odd way to ask your fellow iphone users for help. Berating oterh users will not help you.
"it's too fragile"
No it is not. i have never damaged one, nor has anyone I know.
" U loose data when Ur phone is locked"
No you don't. Why do you think this?
"and there is no customer support!!! "
Wrong yet again. Apple has an 800 number and they have many retail stores and they have support articles that you can access using the search bar. Or you can contact them throgh express lane online
"but I will go back with Blackberry "
Please do.
Good ridance

220: Unable to set NLS_LANGUAGE. Oracle Workflow Builder

Hi All,
When i am trying to login to OWF Builder its throwing error:
220: Unable to set NLS_LANGUAGE.
210: Oracle Error: ORA-00942: table or view does not exist
. SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)I already referred:
Problem with NLS_LANGUAGE
*MOS tech note : 220:Unable To Set NLS_LANGUAGE Error In Workflow Builder [ID 728330.1]*
and other related threads.
All values in registry are correct as per DB NLS settings
Here the strange thing is i am able to login with apps account its not giving this error and when i am trying to login with another custom db account its throwing error.
I even granted select, insert, update privilege on WF_LANGUAGES view to custom db user still same issue.
Any pointers on this issue is really appreciated.
Many thanks in advance.
regards,
X A H E E R

Hi helios,
Many thanks for your input.
Did you check note Error While Connecting To Database Using The Workflow Builder [ID 577905.1]? After you follow note 220:Unable To Set NLS_LANGUAGE Error In Workflow Builder [ID 728330.1] did you restart machine?yes, i restarted my PC and the tech note provides the same solution from tech note *577905.1* as i updated in my earlier post.
If its the problem of NLS_LANG then it should not allow me login with apps also right??
But i can login with apps without any issues.
thanks,
X A H E E R

Unable to set some dates in Adobe bridge cs2

HI ALL
Our keywording team using the Adobe bridge CS2.
Kindly hep me to understand Why some dates Like
1/1/1970
1/1/1642
1/1/1890
etc .....
I unable to set in ITPC image Tab information .............
Lakhan

Hi
Thanks for revert ......
I tried with CS2 & CS3 but only specific dates like (1/1/1970) i above mentioned is still not reflecting in IPTC image info ........
Please suggest....

Illustrator won't run: "unable to set maximum number of files to be opened"

I have an intel macbook pro (core duo with 2GB ram) and a copy of purchased adobe creative suite 2. Other applications in the suite like photoshop, acrobat, etc can run on my mac without any problem. But when I try to run illustrator, it just shows an error message "Unable to set maximum number of files to be opened" and quits. I also installed a trial version of illustrator cs3 and got the same problem. Can anyone help? Thanks.
CC

Hi, I realize this is an old thread but it was unanswered and the issue has come up again in a newer thread:
http://forums.adobe.com/message/2534652
If the original poster sees this, can you reply tin the new thread and let us know if you were ever to solve this problem?
Thanks!

Unable to set custom keybindings in gnome

Similar Messages

Maybe you are looking for