Unable to set default develop setting to specific camera

Hi Guys,
I like to change the default develop settings for my camera. It's done in the Develop module in Camera Calibation. While holding the Option key the tight button changes to Set Default...
After pressing the button nothing happens on one of my Mac's on the other it does work. Both settings in the Preference menu called "Make default specific to camera serial number" is cheked on both machines.
Any idea why it is not working on one machine?
Both are OSX 10.9 and Lightroom 5.4
Thanks!
Bart

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

Similar Messages

Unable to restore default newtab setting

Since a few days ago, the settings for opening a new tab in firefox have changed to redirect me to
"http://www.4-you.net/". I have tried using the About:config menus to restore the default newtab page, and also attempted to use a "restore all defaults" add-on to the browser, but neither method solved the problem. Can someone help me get rid of this annoying new setting and restore the default setting?

I ran the "Hitman" program, and while it seems to have removed some threats, I have still been unable to resolve the problem. The new tab still goes to the incorrect place, and I am still unable to effect a change to the setting via the About:config menu.

Way to set default alarm setting?

Is there a way to set a default/preference for the alarm warnings, as in entourage? I currently have to set each event with an alarm if I want one.
thanks in advance

I just want to bump this topic up to the top of the stack, and second the question. This seems like a pretty basic function; is there really no way to do it?

Excel 2010 - Set default zoom setting

Hi
All my Excel worksheets seem to be set at 60% magnification, I want to change the default to 80&, is this possible?
Thanks
Viv
Viv Haig

Hi,
Maybe try creating an Excel addin(.xlam) with the following code:
Public RunWhen As Double
Private Sub Workbook_Open()
MsgBox "The Zoom will be changed to 80%."
cRunIntervalSeconds = 5 ' Update value every five seconds
cRunWhat = "ThisWorkbook.TheSub" ' the name of the procedure to run
RunWhen = Now + TimeSerial(0, 0, cRunIntervalSeconds)
Application.OnTime EarliestTime:=RunWhen, Procedure:=cRunWhat, _
Schedule:=True
End Sub
Sub TheSub()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
ws.Select
ActiveWindow.Zoom = 80
Next ws
MsgBox "Zoom has been changed."
End Sub
Paste the code into Thisworkbook section in VBE:
Save the workbook as .xlam file and then add this Excel addin file by:
File > Add-Ins > Go... > Browse... > locate the .xlam file and then double click on it to add.
Enable the macro setting in Excel.
Next time after you open an existing workbook the code will be run to change the Zoom value to 80%.
Best regards,
Rex Zhang
TechNet Community Support
A new Office has arrived, try it now.
A beautiful Start. It begins here. Windows 8 and Windows RT.
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Set default filter

Hello,
could you please help me find the way to set default filter over a specifed colum in CRM 7.0 on a table view? It should work just like a manual created filter, but it should exists already by first call of a view with table.
I tried following but without success:
iterator->filter_by_property( iv_attr_name = 'XXX'
                               iv_value = 'XXX' ).
and implement it following menthods for context for view with should have mentioned filter:
getter for field
do_prepare_output
do_init_context
but it didn't work... Method is executed and it look like everything works fine, but as result the filter is not created....
thanks

Hi Juzio,
You can as well try using the following code in DO_PREPARE_OUTPUT method.
Filter the table with BTPARTNER according to filter values
IF lv_default_filter EQ abap_true.
                 me->typed_context->BTPARTNER->set_filter( EXPORTING iv_attr_name = 'PARTNER_NO' iv_value =
              lv_filter_member )."#EC NOTEXT
         ELSE
            me->typed_context->BTPARTNER->delete_filter( ).
          ENDIF.
You can reset the flag lv_default_filter in the DO_HANDLE_EVENT method of the view controller when the event 'filter'
is triggered from the table filter by the user.
Regards,
Leon

Default shop paper against specific plant

Hi All,
can anybody tell me how can we default shop paper against specific plant?
In PM there are below options available -
1. User specific print control - Here we can set print controls (E.g. No of copies) against specific plant.
2. Define shop papers for order types - Here we can set default shop papers against document type (E.g. order type PM01)
But I could not find, how can we set default shop paper against specific plant?
Thanks & regards,
Kedar

hi,
Transaction-->>OIDF
Menu path     IMG: Plant Maintenance and Customer Service -> Maintenance and Service Orders -> Print Control -> Define Shop Papers, Forms and Output Programs ->Print Diversion According to Field Contents
In above node you can set your printer as per Plant wise
You can define various shop papers and their print layout in this Customizing activity.
Consider the following when maintaining the print layout:
u2022     You can maintain shop paper layouts separately for notifications and orders.
u2022     Preliminary settings are supplied for each of these areas.
u2022     In the detailed display you can see the name of a report for each shop paper and the description of a form that has been allocated.
u2022     The individual reports serve the print output; the form defines the layout of the shop paper and the fields that are printed.
Steps:
1. Define Shop Papers
2. Define Shop Papers for Order Type 'selection field' to be marked for predefined printing documents
3.Print Diversion According to Field Contents
Remark:
output program not standard, form routine not standard,
form is not used with smart forms
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on May 11, 2009 12:07 PM

Outlook 2013 (Office 365 Install) unable to set Default Mail Client

After installing Office 2013 via Office 365 for Business, the installation is unable to set Outlook as the default mail client. Message appears after each system reboot:
"Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client."
When going into Control Panel and manually set the Outlook client as the default, the setting does not take. After a reboot, the warning message reappears.
Anyone else having the same issue?

MJ
No but then again it is a Beta. Did you clean install or update? 9926 seems to be relatively stable.
Wanikiya and Dyami--Team Zigzag

Unable to set default program for .pdf

CURRENT PROBLEM:
As show in print screen, when i attempt to set default program nth happens at all. The only way i can open any .pdf file now is by 1st opening adobe reader 9 and select the .pdf file manually
INITIAL STAGE OF PROBLEM:
Problem started after upgrading to windows 7 from vista. Windows 7 is able to recognise adobe reader 8 as a valid default program since it is in windows.old. Thus the default for .pdf is adobe reader 8 (it was installed in vista).
Subsequently, installing adobe reader 9 isof no use as it will be ignored and windows 7 will only continue to use adobe reader 8 as the default reader when i try to open a .pdf file, unless if i manually opened adobe reader 9 and selected a .pdf file manaually
However, I am unable to uninstall adobe reader 8 as the "program and feature" can only identify adobe reader 9 and does not think that adobe reader 8 exists.
ATTEMPTs TO SOLVE:
Thus, I removed windows.old by using the disk cleanup. However, I am still unable to set adobe reader 9 as the default reader. Instead, .pdf are no longer accessible/"open-able" unless I 1st opened adobe reader 9 and then selected a .pdf manaually.
I've attempted reinstalling and restarting comps etc, they dun seem to help. I suspect the OS is now only able to recognise adobe reader 8 from windows.old as a valid program directory due to some registry issues since it was initally set as the default when i 1st upgraded the OS. Now that adobe reader 8 is removed, there might be some corrupted registry somewhere that needs to be set right again?
Really need help with this. Thanks a million.

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

I want to set default printer settings to be used only for a specific type of application, certain documents. All other print jobs should use a different default setting for the printer.

I am printing a specific document from a web based application. This document need to be printed in landscape. So I would like to set the default settings for this specific printer to landscape. But for all other printers it should be portrait. But this does not seem to work. The browser picks the settings from the standard/default printer and uses this for all print jobs.

Embie wrote:
I was told by support that my problem was a hardware problem and that HP would not replace the faulty hardware. Great. I will replace my faulty hardware manufacturer. Simple, HP never again.
In the hour since you have registered you have posted seven messages, none of which contain any useful information that would allow someone here to help you. Please read this post then provide some details in a new thread. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? What is the problem you are having (with the printer...)?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Unable to set default Model

Hi,
When i tried to set default Model for Web Input/Report forms i am unable to change the previous. Exp when i go and set A as my default model in features>context defaults it shows as default model ....... when i open input form it still has the model B.(i have also re-logged in to see the changes not shown though)
Please help
Thanks,
PR

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

Changing Default Layout Setting - User-specific

Dear Gurus,
This is related to general ALV Layout setting. When we choose Select Layout -> Choose Layout, the default layout setting will show All, is there any way by which we can change this to User-specific Layouts by default? (may be through some parameter id?).
Many Thanks!
Best Regards,
Sree.

Hi ,
Can you explain me your requirement in detail.
Regards,
Rohan.

Unable to set default fonts n style in Cisco Jabber

Unlike CUPC or WebEx Connect, no option is currently available under File -> Options for both Cisco Jabber for Windows (On Prem or Cloud deployement) to configure and set default font/size/style for Jabber.

Got an update on this. This feature is targeted in future release where we'll allow end users to change the Outgoing Font Size n Style!!

Problems Setting Up Developer Users

I am having a problem setting up developer users and I am trying to determine if I am missing a step or if there is a configuration problem on my staging and production systems.
What I want to do should be very simple. I want to create a user that can create an application and see the information under the "Application" tab in the Navigator.
I have created the user using the following steps on 3.0.9.82 for Unix:
1. Create the user
2. Make the user a full administrator (rather than end user)
3. Make the user a member of the portal_developers group
4. Make the user's default group the portal_developers group
However, when I do this the user does not see the information under the
"Application" tab. The only way I can get the user to see the info under the
"Application" tab is to make him a member of the Portal_administrators
and/or DBA group. Both my staging and production boxes have the same result.
Does anyone have any thoughts or suggestions on what might be happening?

Thank you- I have read through that thread and can see some resonance with my issue.
My AOL emails work VERY fast with BB, in fact almost simultaneously received on PC & Torch " ping ping!"
This issue only raised its ugly head when I had 2 Torches replaced by my insurers.
Whilst the claim was in process I used a new Curve, loaded from backup on PC to keep emails going and of course phone & web facilities. ( I use the BB to power internet via bluetooth to my PC / laptop when living on a remote island with no phone lines or power supplies) All was fine. Swapping email accounts took a few minutes with the usual password confirmations for each AOL screenname etc.
Then the new Torches came back from insurers, and I tried to swap devices. Phoning & texting is fine. Al data and contacts swap over fine.
SETUP email accounts.............stymied every time. It says repeatedly that my user name/password is invalid etc etc etc
Have tried security wipes. Have tried setting up new BB ID & passwords on PC website. All is OK until I try to setup emails on the Torches. This has used up ridiculous amounts of time- all wasted.
I love the BB phones and the fast email push......in fact I recently bought a new Sony Xperia Z1 but sent it back because of wifi coverage meant no emails on that superb phone for lots of the time.
Good old BB I said..........I always get emails wherever I am. ( Rural Scotland has very patchy radio & wifi coverage)
Was about to purchase new Z10s just to get a bigger screen, but now I am averse to buying ANY BB phone again because this present mess means I may never get emails set up again. How nuts is that?
Many thanks for all help & suggestions..........boy do I need them!!
Kind wishes from West of Scotland
Fair winds and kind landfalls

How do I set iCal alerts to a specific time the previous day, regardless of their specific time (so I can get an overview of tomorrow)?

I think it would be incredibly useful to be able to get at, say, 10pm each evening, a pop up overview of the next day's events. I'm hoping for a tick box somewhere to set my default reminder as a specific time on the previous day, in the same way that you can do '15 minutes before'. Currently you can set reminders for a specific time and date, but, entering this for every item – especially if you want them to coincide – is more than slightly tedious. Furthermore, I input a lot of my Calender events on my iPhone (they sync via iCloud), which has no such functionality, rendering this essentially defunct.
Any ideas?

apple don't have a version of windows
only microsoft have windows
as how one automatate windows to send mails at a time
googled it for you
http://www.howtogeek.com/125045/how-to-easily-send-emails-from-the-windows-task- scheduler/
more options in the search
https://www.google.dk/search?client=opera&q=automatically+send+email+in+windows& sourceid=opera&ie=UTF-8&oe=UTF-8

Process open items: how to set defaults for the additional selections

Hi FI experts,
Can anyone tell me if it is possible to set defaults for the additional selections in the processing of open items.
I am using transaction F-04 (or F-06 or F-07) to post with clearing.
When processing the open items I can use additional selection parameters. In my case I need to use the document type. I would like to save this selection as a default but this doesn't seem to be possible.
1. it is not possible to save a variant for the processing of open items
2. I can not create a variant transaction (with trx. SHD0) for F-0x since this is only possible for dialog transactions
Do you see another way to store defaults for the additional selections in open item processing?
Thanks a lot.
Dimitri

Hi,
When you create a transaction variant from FB05, then also you will not able to default the value for additional selections variable. Hence SHD0 is not going to help.
As said above, either you can change the additional selection screen parameters, but here again you can't default the value. You can only reduce the number of entries on the screen.
Else you can create a custom transaction code by copying the standard. Even SAP recommends to create custom codes from standard tcode for clearing purposes depending on requirements.
Please check this link:
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/37b8e7455b11d182b40000e829fbfe/frameset.htm
In the above link, in navigation choose clearing -- Specifications for processing open items
If it is a custom transaction then you can default document number.
Regards,
Ravi

Unable to set default develop setting to specific camera

Similar Messages

Maybe you are looking for